- 27 Jun, 2018 16 commits
-
-
Jernej Skrabec authored
Both mixers have similar capabilities as others SoCs with DE2. First mixer has 1 VI and 3 UI planes and supports HW scaling on all planes. Second mixer has 1 VI and 1 UI planes and also supports HW scaling on all planes. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-15-jernej.skrabec@siol.net
-
Jernej Skrabec authored
TV TCONs are always connected to TV or HDMI encoder, so it doesn't make sense to check if panel or bridge is connected to them. Check if TCON has channel 0 and only then check for connected panel or bridges. Signed-off-by:
-
Jernej Skrabec authored
LVDS and RGB interfaces are always connected to TCONs which have channel 0. It doesn't make sense to try to init them on TV TCONs. Add a check if TCON has channel 0 before trying to init LVDS or RGB interface. Signed-off-by:
-
Jernej Skrabec authored
Current "old" method to find engine worked pretty well for DE2. However, it doesn't work when TCON TOP is between mixer (engine) and TCON. TCON TOP has multiple input ports, but current engine search algorithm expects only one. This can be fixed by first looking for output port id and selecting matching input by subtracting 1 for the next round. This work even if there is only one input and output. Signed-off-by:
-
Jernej Skrabec authored
TV TCONs (channel 1 only) are always connected to TV or HDMI encoder. Because of that, all output endpoints on such TCON node will point to a encoder which is part of component framework. Correct current graph traversing algorithm in such way that it doesn't skip output enpoints with id 0 on TV TCONs. Signed-off-by:
-
Jernej Skrabec authored
TCON TOP is different from other nodes in graph by having 3 input and 3 output ports. Additionally, connection to TV TCON might lead back to HDMI mux input port, creating loops. Add support for traversing such graph. Signed-off-by:
-
Jernej Skrabec authored
Until now, each node has one input port and one output port. However, with TCON TOP this is no longer true. It has 3 input and 3 output ports. In order to prepare to this situation, split out the code which checks all endpoints in input port and adds available components to fifo. This patch doesn't do any functional change. Signed-off-by:
-
Jernej Skrabec authored
sun4i_drv_add_endpoints() has a memory leak since it uses of_node_put() when remote is equal to NULL and does nothing when remote has a valid pointer. Invert the logic to fix memory leak. Signed-off-by:
-
Jernej Skrabec authored
As already described in DT binding, TCON TOP is responsible for configuring display pipeline. In this initial driver focus is on HDMI pipeline, so TVE and LCD configuration is not implemented. Implemented features: - HDMI source selection - clock driver (TCON and DSI gating) - connecting mixers and TCONS Something similar also existed in previous SoCs, except that it was part of first TCON. Signed-off-by:
-
Jernej Skrabec authored
TCON TOP main purpose is to configure whole display pipeline. It determines relationships between mixers and TCONs, selects source TCON for HDMI, muxes LCD and TV encoder GPIO output, selects TV encoder clock source and contains additional TV TCON and DSI gates. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
David Lechner authored
This adds a new driver for display panels that use the Ilitek ILI9341 controller. It currently supports a single display panel, namely the YX240QV29-T (e.g. Adafruit 2.4" TFT). The init sequence is from the Adafruit Python library for the ILI9341 controller. https://github.com/adafruit/Adafruit_Python_ILI9341Signed-off-by:
David Lechner <david@lechnology.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180525193623.15533-5-david@lechnology.com
-
David Lechner authored
This adds a new binding for Ilitek ILI9341 display panels. It includes a compatible string for one display (more can be added in the future). The YX240QV29-T panel[1] is found, for example, in an Adafruit breakout board[2] and in Mindsensors' PiStorms[3]. The vendor prefix "adafruit" is used because the actual vendor is not known, but Adafruit is the most common source for a product that contains this panel. [1]: https://cdn-learn.adafruit.com/assets/assets/000/046/879/original/SPEC-YX240QV29-T_Rev.A__1_.pdf [2]: https://www.adafruit.com/product/2478 [3]: http://www.mindsensors.com/stem-with-robotics/13-pistorms-v2-base-kit-raspberry-pi-brain-for-lego-robotSigned-off-by:
-
David Lechner authored
This adds a device tree vendor prefix for Adafruit Industries, LLC. Signed-off-by:
-
David Lechner authored
This fixes the path to the ilitek,ili9225 device tree binding file. Signed-off-by:
-
Sandy Huang authored
linebuffer mode should be LB_YUV_3840X5 when width is bigger than 1280 in yuv mode. Separate yuv and rgb case makes the scl_vop_cal_lb_mode() logic clearer. Signed-off-by:
Sandy Huang <hjc@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1530001004-25036-1-git-send-email-hjc@rock-chips.com
-
Ville Syrjälä authored
Use drm_crtc_mask() where appropriate. Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
- 26 Jun, 2018 3 commits
-
-
Gustavo A. R. Silva authored
Fix the following compile warning: warning: unused variable ‘psbfb’ [-Wunused-variable] struct psb_framebuffer *psbfb = to_psb_fb(fb); Fixes: c7cbed56 ("drm/gma500: Fix Medfield for drm_framebuffer move") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
fb is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after fb has been properly null checked at line 74: if (!fb) Addresses-Coverity-ID: 1470169 ("Dereference before null check") Signed-off-by: -
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_gem_object. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
Thomas Zimmermann <contact@tzimmermann.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180625152148.29555-1-contact@tzimmermann.org
-
- 25 Jun, 2018 6 commits
-
-
Maxime Ripard authored
The LHR050H41 panel is the panel shipped with the BananaPi M2-Magic, and is based on the Ilitek ILI9881c Controller. Add a driver for it, modelled after the other Ilitek controller drivers. Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Maxime Ripard authored
The LHR050H41 from BananaPi is a 1280x700 4-lanes DSI panel based on the ILI9881c from Ilitek. Acked-by:
-
John Stultz authored
The driver doesn't support scaling, but when an atomic test is done it repeatedly spits out this warning which isn't particularly useful. So just remove the error message. Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Peter Griffin <peter.griffin@linaro.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Noralf Trønnes authored
Make ioctl wrappers for functions that will be used by the in-kernel API. The following functions are touched: - drm_mode_create_dumb_ioctl() - drm_mode_destroy_dumb_ioctl() - drm_mode_addfb() - drm_mode_rmfb() Signed-off-by:
-
Noralf Trønnes authored
It only makes sense for userspace clients. Signed-off-by:
-
David Herrmann authored
Rather than doing drm_file allocation/destruction right in the fops, lets provide separate helpers. This decouples drm_file management from the still-mandatory drm-fops. It prepares for use of drm_file without the fops, both by possible separate fops implementations and APIs (not that I am aware of any such plans), and more importantly from in-kernel use where no real file is available. Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
- 22 Jun, 2018 2 commits
-
-
Eric Anholt authored
Drivers such as vc4 don't initialize mode_config.funcs until later in initialization, but we know they're atomic since they've got the flag set. This avoids oopsing on dereferencing funcs in the new atomic methods sanity checks. I moved the atomic check function down below the core flag check, to avoid needing a prototype. Signed-off-by:
Eric Anholt <eric@anholt.net> Fixes: ba1f665f ("drm: Add checks for atomic_[duplicate/destroy]_state with atomic drivers") Link: https://patchwork.freedesktop.org/patch/msgid/20180621195428.17447-1-eric@anholt.netReviewed-by:
-
Christian König authored
Some functions are unused after removal of the kmap_atomic DMA-buf interface. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Fixes: f664a526 ("dma-buf: remove kmap_atomic interface") Link: https://patchwork.freedesktop.org/series/45245/
-
- 21 Jun, 2018 6 commits
-
-
Eric Anholt authored
Since our seqno value comes from a counter associated with the GPU ring, not the entity (aka client), they'll be completed out of order. There's actually no need for this code at all, since we don't have enable_signaling() and thus DMA_FENCE_SIGNALED_BIT will be set before we could be called. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de>
-
Eric Anholt authored
Between creation and queueing of a job, you need to prevent any other job from being created and queued. Otherwise the scheduler's fences may be signaled out of seqno order. v2: move mutex unlock to the error label. Signed-off-by:
-
Eric Anholt authored
This makes it more likely that the docs stay updated with the code. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com>
-
Souptick Joarder authored
Use new return type vm_fault_t for fault handler. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
-
Ville Syrjälä authored
The meaning of the mode_config max_width/height fields has not been entirely clear. They are used both as the max framebuffer dimensions, and they are also used by drm_mode_getconnector() to filter out any mode whose hdisplay/vdisplay exceed those limits. Let's put it in writing that max_width/height only refrer to the max framebuffer dimensions, and should those be higher than the hardware limits for display timings the driver must validate the latter using some other means. We'll keep the max_width/height usage in drm_mode_getconnector() because setcrtc treats hdisplay/vdisplay also as the primary plane width, and having a plane bigger than the max fb size doesn't make much sense (if we ignore scaling that is). It all works out fine as long as the max fb dimensions are at least equal to the max timing limits. If the opposite were true we may want to rethink what drm_mode_getconnector() does. Maybe do the mode filtering only for non-atomic userspace? Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com>
-
Christian König authored
Fixup for "dma_buf: remove device parameter from attach callback v2". I missed this driver, sorry for the noise. Patch is not even compile tested. Signed-off-by:
-
- 20 Jun, 2018 7 commits
-
-
Chris Wilson authored
Fix i915's CI build after the removal of the dmabuf->kmap interface that left the mock routines intact. In file included from drivers/gpu/drm/i915/i915_gem_dmabuf.c:335:0: drivers/gpu/drm/i915/selftests/mock_dmabuf.c:104:13: error: ‘mock_dmabuf_kunmap_atomic’ defined but not used [-Werror=unused-function] static void mock_dmabuf_kunmap_atomic(struct dma_buf *dma_buf, unsigned long page_num, void *addr) drivers/gpu/drm/i915/selftests/mock_dmabuf.c:97:14: error: ‘mock_dmabuf_kmap_atomic’ defined but not used [-Werror=unused-function] static void *mock_dmabuf_kmap_atomic(struct dma_buf *dma_buf, unsigned long page_num) Fixes: f664a526 ("dma-buf: remove kmap_atomic interface") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180620162152.1158-1-chris@chris-wilson.co.ukReviewed-by:
-
Gustavo Padovan authored
We got a few conflicts in drm_atomic.c after merging the DRM writeback support, now we need a backmerge to unlock develop development on drm-misc-next. Signed-off-by:Gustavo Padovan <gustavo.padovan@collabora.com>
-
Liviu Dudau authored
Due to the fact that writeback connectors behave in a special way in DRM (they always report being disconnected) we might confuse some userspace. Add a client capability for writeback connectors that will filter them out for clients that don't understand the capability. Changelog: - only accept the capability if the client has already set the DRM_CLIENT_CAP_ATOMIC one. Cc: Sean Paul <seanpaul@chromium.org> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Reviewed-by:
Brian Starkey <brian.starkey@arm.com> Link: https://patchwork.freedesktop.org/patch/229038/
-
Brian Starkey authored
Add the WRITEBACK_OUT_FENCE_PTR property to writeback connectors, to enable userspace to get a fence which will signal once the writeback is complete. It is not allowed to request an out-fence without a framebuffer attached to the connector. A timeline is added to drm_writeback_connector for use by the writeback out-fences. In the case of a commit failure or DRM_MODE_ATOMIC_TEST_ONLY, the fence is set to -1. Changes from v2: - Rebase onto Gustavo Padovan's v9 explicit sync series - Change out_fence_ptr type to s32 __user * - Set *out_fence_ptr to -1 in drm_atomic_connector_set_property - Store fence in drm_writeback_job Gustavo Padovan: - Move out_fence_ptr out of connector_state - Signal fence from drm_writeback_signal_completion instead of in driver directly Changes from v3: - Rebase onto commit 7e9081c5 ("drm/fence: fix memory overwrite when setting out_fence fd") (change out_fence_ptr to s32 __user *, for real this time.) - Update documentation around WRITEBACK_OUT_FENCE_PTR Signed-off-by:
Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/229036/
-
Brian Starkey authored
Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Christian König authored
Neither used nor correctly implemented anywhere. Just completely remove the interface. Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/226645/
-
Christian König authored
The device parameter is completely unused because it is available in the attachment structure as well. v2: fix kerneldoc as well Signed-off-by:
-
