- 11 Oct, 2023 16 commits
-
-
David S. Miller authored
Russell King says: ==================== net: dsa: remove validate method These three patches remove DSA's phylink .validate method which becomes unnecessary once the last two drivers provide phylink capabilities, which this patch set adds. Both of these are best guesses. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
As all drivers now provide phylink capabilities (including MAC), the if() condition in dsa_port_phylink_validate() will always be true. We will always use the generic validator, which phylink will call itself if the .validate method isn't populated. Thus, there is now no need to implement the .validate method, so this implementation can be removed. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
-
Russell King (Oracle) authored
Add phylink capabilities for dsa_loop, which I believe being a software construct means that it supports essentially all interface types and all speeds. Signed-off-by:
-
Russell King (Oracle) authored
Add phylink capabilities for vsc73xx. Although this switch driver does populates the .adjust_link method, dsa_slave_phy_setup() will still be used to create phylink instances for the LAN ports, although phylink won't be used for shared links. There are two different classes of switch - 5+1 and 8 port. The 5+1 port switches uses port indicies 0-4 for the user interfaces and 6 for the CPU port. The 8 port is confusing - some comments in the driver imply that port index 7 is used, but the driver actually still uses 6, so that is what we go with. Also, there appear to be no DTs in the kernel tree that are using the 8 port variety. It also looks like port 5 is always skipped. The switch supports 10M, 100M and 1G speeds. It is not clear whether all these speeds are supported on the CPU interface. It also looks like symmetric pause is supported, whether asymmetric pause is as well is unclear. However, it looks like the pause configuration is entirely static, and doesn't depend on negotiation results. So, let's do the best effort we can based on the information found in the driver when creating vsc73xx_phylink_get_caps(). Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Sonia Sharma authored
The switch statement in netvsc_send_completion() is incorrectly validating the length of incoming network packets by falling through to the next case. Avoid the fallthrough. Instead break after a case match and then process the complete() call. The current code has not caused any known failures. But nonetheless, the code should be corrected as a different ordering of the switch cases might cause a length check to fail when it should not. Signed-off-by:
Sonia Sharma <sonia.sharma@linux.microsoft.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
David S. Miller authored
Heng Qi says: ==================== virtio-net: Fix and update interrupt moderation The setting of virtio coalescing parameters involves all-queues and per queue, so we must be careful to synchronize the two. Regarding napi_tx switching, this patch set is not only compatible with the previous way of using tx-frames to switch napi_tx, but also improves the user experience when setting interrupt parameters. This patch set has been tested and was part of the previous netdim patch set[1] and is now being split to be rolled out in steps. [1] https://lore.kernel.org/all/20230811065512.22190-1-hengqi@linux.alibaba.com/ --- v2->v3: 1. Fix a tiny comment. v1->v2: 1. Fix some minor comments and add ack tags. ==================== Signed-off-by:
-
Heng Qi authored
Update a comment because virtio-net now supports both VIRTIO_NET_F_NOTF_COAL and VIRTIO_NET_F_VQ_NOTF_COAL. Signed-off-by:
Heng Qi <hengqi@linux.alibaba.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Heng Qi authored
According to the definition of virtqueue coalescing spec[1]: Upon disabling and re-enabling a transmit virtqueue, the device MUST set the coalescing parameters of the virtqueue to those configured through the VIRTIO_NET_CTRL_NOTF_COAL_TX_SET command, or, if the driver did not set any TX coalescing parameters, to 0. Upon disabling and re-enabling a receive virtqueue, the device MUST set the coalescing parameters of the virtqueue to those configured through the VIRTIO_NET_CTRL_NOTF_COAL_RX_SET command, or, if the driver did not set any RX coalescing parameters, to 0. We need to add this setting for vq resize (ethtool -G) where vq_reset happens. [1] https://lists.oasis-open.org/archives/virtio-dev/202303/msg00415.html Fixes: 394bd877 ("virtio_net: support per queue interrupt coalesce command") Cc: Gavin Li <gavinl@nvidia.com> Signed-off-by:
-
Heng Qi authored
When the user sets a non-zero coalescing parameter to 0 for a specific virtqueue, it does not work as expected, so let's fix this. Fixes: 394bd877 ("virtio_net: support per queue interrupt coalesce command") Reported-by:
Xiaoming Zhao <zxm377917@alibaba-inc.com> Cc: Gavin Li <gavinl@nvidia.com> Signed-off-by:
-
Heng Qi authored
When using .set_coalesce interface to set all queue coalescing parameters, we need to update both per-queue and global save values. Fixes: 394bd877 ("virtio_net: support per queue interrupt coalesce command") Cc: Gavin Li <gavinl@nvidia.com> Signed-off-by:
-
Heng Qi authored
Since virtio-net allows switching napi_tx for per txq, we have to get the specific txq's result now. Fixes: 394bd877 ("virtio_net: support per queue interrupt coalesce command") Cc: Gavin Li <gavinl@nvidia.com> Signed-off-by:
-
Heng Qi authored
Background: 1. Commit 0c465be1 ("virtio_net: ethtool tx napi configuration") uses tx-frames to toggle napi_tx (0 off and 1 on) if notification coalescing is not supported. 2. Commit 31c03aef ("virtio_net: enable napi_tx by default") enables napi_tx for all txqs by default. Status: When virtio-net supports notification coalescing, after initialization, tx-frames is 0 and napi_tx is true. Problem: When the user only wants to set rx coalescing params using ethtool -C eth0 rx-usecs 10, or ethtool -Q eth0 queue_mask 0x1 -C rx-usecs 10, these cmds will carry tx-frames as 0, causing the napi_tx switching condition is satisfied. Then the user gets: netlink error: Device or resource busy. The same happens when trying to set rx-frames, adaptive_rx, adaptive_tx... How to fix: When notification coalescing feature is negotiated, initially make the value of tx-frames to be consistent with napi_tx. For compatibility with the past, it is still supported to use tx-frames to toggle napi_tx. Reported-by:
-
Justin Stitt authored
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. ethtool_sprintf() is designed specifically for get_strings() usage. Let's replace strncpy in favor of this more robust and easier to understand interface. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90Signed-off-by:
Justin Stitt <justinstitt@google.com> Reviewed-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-dsa-realtek-rtl8365mb-c-v1-1-0537fe9fb08c@google.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Justin Stitt authored
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. ethtool_sprintf() is designed specifically for get_strings() usage. Let's replace strncpy in favor of this more robust and easier to understand interface. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90Signed-off-by:
-
Justin Stitt authored
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. ethtool_sprintf() is designed specifically for get_strings() usage. Let's replace strncpy in favor of this more robust and easier to understand interface. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
-
Arnd Bergmann authored
After the cops driver is removed, ipddp is now the only CONFIG_DEV_APPLETALK but as far as I can tell, this also has no users and can be removed, making appletalk support purely based on ethertalk, using ethernet hardware. Link: https://lore.kernel.org/netdev/e490dd0c-a65d-4acf-89c6-c06cb48ec880@app.fastmail.com/ Link: https://lore.kernel.org/netdev/9cac4fbd-9557-b0b8-54fa-93f0290a6fb8@schmorgal.com/ Cc: Doug Brown <doug@schmorgal.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20231009141139.1766345-1-arnd@kernel.orgSigned-off-by:
-
- 10 Oct, 2023 17 commits
-
-
Rob Herring authored
It is not necessary to call of_match_device() in probe. If we made it to probe, then we've already successfully matched. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Petr Machata says: ==================== mlxsw: Fix -Wformat-truncation warnings Ido Schimmel writes: Commit 6d4ab2e9 ("extrawarn: enable format and stringop overflow warnings in W=1") enabled format warnings as part of W=1 builds, resulting in two new warnings in mlxsw. Fix both and target at net-next as the warnings are not indicative of actual bugs. ==================== Link: https://lore.kernel.org/r/cover.1696600763.git.petrm@nvidia.comSigned-off-by:
-
Ido Schimmel authored
Ethtool stats strings cannot be longer than 32 characters ('ETH_GSTRING_LEN'), including the terminating null byte. The format string '%.29s_%.1d' can exceed this limitation if the per-TC counter name exceeds 28 characters. Together with the underscore, the two digits of the TC (bounded at 16) and the terminating null byte, more than 32 characters will be used. Fix this by bounding the counter name at 28 characters which suppresses the following build warning [1]. This does not affect ethtool output since the longest counter name does not exceed this limitation. [1] drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c: In function ‘mlxsw_sp_port_get_strings’: drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:58: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=] 622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d", | ^ In function ‘mlxsw_sp_port_get_tc_strings’, inlined from ‘mlxsw_sp_port_get_strings’ at drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:677:4: drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:17: note: ‘snprintf’ output between 3 and 33 bytes into a destination of size 32 622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 623 | mlxsw_sp_port_hw_tc_stats[i].str, tc); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c: In function ‘mlxsw_sp_port_get_strings’: drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:58: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=] 622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d", | ^ In function ‘mlxsw_sp_port_get_tc_strings’, inlined from ‘mlxsw_sp_port_get_strings’ at drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:677:4: drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:17: note: ‘snprintf’ output between 3 and 33 bytes into a destination of size 32 622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 623 | mlxsw_sp_port_hw_tc_stats[i].str, tc); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Ido Schimmel authored
The name of a thermal zone device cannot be longer than 19 characters ('THERMAL_NAME_LENGTH - 1'). The format string 'mlxsw-lc%d-gearbox%d' can exceed this limitation if the maximum number of line cards and the maximum number of gearboxes on each line card cannot be represented using a single digit. This is not the case with current systems nor future ones. Therefore, increase the size of the result buffer beyond 'THERMAL_NAME_LENGTH' and suppress the following build warning [1]. If this limitation is ever exceeded, we will know about it since the thermal core validates the thermal device's name during registration. [1] drivers/net/ethernet/mellanox/mlxsw/core_thermal.c: In function ‘mlxsw_thermal_gearboxes_init.constprop’: drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:543:71: error: ‘%d’ directive output may be truncated writing between 1 and 3 bytes into a region of size between 1 and 3 [-Werror=format-truncation=] 543 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-gearbox%d", | ^~ In function ‘mlxsw_thermal_gearbox_tz_init’, inlined from ‘mlxsw_thermal_gearboxes_init.constprop’ at drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:611:9: drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:543:52: note: directive argument in the range [1, 255] 543 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-gearbox%d", | ^~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:543:17: note: ‘snprintf’ output between 19 and 23 bytes into a destination of size 20 543 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-gearbox%d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 544 | gearbox_tz->slot_index, gearbox_tz->module + 1); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Oleksij Rempel authored
Address an issue in ksz9477_acl_move_entries() where, in the scenario (src_idx == dst_idx), ksz9477_validate_and_get_src_count() returns 0, leading to usage of uninitialized src_count and dst_count variables, which causes undesired behavior as it attempts to move ACL entries around. Fixes: 002841be ("net: dsa: microchip: Add partial ACL support for ksz9477 switches") Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Suggested-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
-
Paolo Abeni authored
David Morley says: ==================== tcp: save flowlabel and use for receiver repathing This patch series stores the last received ipv6 flowlabel. This last received flowlabel is then used to help decide whether a packet is likely an RTO retransmit or the result of a TLP. This new information is used to better inform the flowlabel change decision for data receivers. ==================== Link: https://lore.kernel.org/r/20231006011841.3558307-1-morleyd.kernel@gmail.comSigned-off-by:
-
David Morley authored
This commit changes the data receiver repath behavior to occur after receiving a single duplicate. This can help recover ACK connectivity quicker if a TLP was sent along a nonworking path. For instance, consider the case where we have an initially nonworking forward path and reverse path and subsequently switch to only working forward paths. Before this patch we would have the following behavior. +---------+--------+--------+----------+----------+----------+ | Event | For FL | Rev FL | FP Works | RP Works | Data Del | +---------+--------+--------+----------+----------+----------+ | Initial | A | 1 | N | N | 0 | +---------+--------+--------+----------+----------+----------+ | TLP | A | 1 | N | N | 0 | +---------+--------+--------+----------+----------+----------+ | RTO 1 | B | 1 | Y | N | 1 | +---------+--------+--------+----------+----------+----------+ | RTO 2 | C | 1 | Y | N | 2 | +---------+--------+--------+----------+----------+----------+ | RTO 3 | D | 2 | Y | Y | 3 | +---------+--------+--------+----------+----------+----------+ This patch gets rid of at least RTO 3, avoiding additional unnecessary repaths of a working forward path to a (potentially) nonworking one. In addition, this commit changes the behavior to avoid repathing upon rx of duplicate data if the local endpoint is in CA_Loss (in which case the RTOs will already be changing the outgoing flowlabel). Signed-off-by:
David Morley <morleyd@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Tested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David Morley authored
In order to better estimate whether a data packet has been retransmitted or is the result of a TLP, we save the last received ipv6 flowlabel. To make space for this field we resize the "ato" field in inet_connection_sock as the current value of TCP_DELACK_MAX can be fully contained in 8 bits and add a compile_time_assert ensuring this field is the required size. v2: addressed kernel bot feedback about dccp_delack_timer() v3: addressed build error introduced by commit bbf80d71 ("tcp: derive delack_max from rto_min") Signed-off-by:
-
Jakub Kicinski authored
The code supports dumps with no input attributes currently thru a combination of special-casing and luck. Clean up the handling of ops with no inputs. Create empty Structs, and skip printing of empty types. This makes dos with no inputs work. Tested-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Link: https://lore.kernel.org/r/20231006135032.3328523-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Jiri Pirko says: ==================== tools: ynl-gen: lift type requirement for attribute subsets Remove the requirement from schema files to specify the "type" for attribute subsets and adjust existing schema files. ==================== Link: https://lore.kernel.org/r/20231006114436.1725425-1-jiri@resnulli.usSigned-off-by:
-
Jiri Pirko authored
No longer needed to define type for subset attributes. Remove those. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
-
Jiri Pirko authored
In case an attribute is used in a subset, the type has to be currently specified. As the attribute is already defined in the original set, this is a redundant information in yaml file, moreover, may lead to inconsistencies. Example: attribute-sets: ... name: pin enum-name: dpll_a_pin attributes: ... - name: parent-id type: u32 ... - name: pin-parent-device subset-of: pin attributes: - name: parent-id type: u32 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Remove the requirement from schema files to specify the "type" for attribute subsets. Signed-off-by: -
Justin Stitt authored
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect `app_name` to be NUL-terminated: dev_info(&oct->pci_dev->dev, "Running %s (%llu Hz)\n", app_name, CVM_CAST64(cs->corefreq)); ... and it seems NUL-padding is not required, let's opt for strscpy(). For `oct->boardinfo.name/serial_number` let's opt for strscpy() as well since it is expected to be NUL-terminated and does not require NUL-padding as `oct` is zero-initialized in octeon_device.c +707: | buf = vzalloc(size); | if (!buf) | return NULL; | | oct = (struct octeon_device *)buf; Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90Signed-off-by:
-
Justin Stitt authored
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. NUL-padding is not required as rep_cfg is memset to 0: | memset(&rep_cfg, 0, sizeof(rep_cfg)); A suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90Signed-off-by:
-
Justin Stitt authored
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We know `fw_type` must be NUL-terminated based on use here: | static bool fw_type_is_auto(void) | { | return strncmp(fw_type, LIO_FW_NAME_TYPE_AUTO, | sizeof(LIO_FW_NAME_TYPE_AUTO)) == 0; | } ...and here | module_param_string(fw_type, fw_type, sizeof(fw_type), 0444); Let's opt to NUL-pad the destination buffer as well so that we maintain the same exact behavior that `strncpy` provided here. A suitable replacement is `strscpy_pad` due to the fact that it guarantees both NUL-termination and NUL-padding on the destination buffer. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90Signed-off-by: -
Justin Stitt authored
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. NUL-padding is not required as drvinfo is memset to 0: | memset(drvinfo, 0, sizeof(struct ethtool_drvinfo)); A suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90Signed-off-by:
-
Justin Stitt authored
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. A suitable replacement is strscpy() [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. bcm_enet_get_drvinfo() already uses strscpy(), let's match it's implementation: | static void bcm_enet_get_drvinfo(struct net_device *netdev, | struct ethtool_drvinfo *drvinfo) | { | strscpy(drvinfo->driver, bcm_enet_driver_name, sizeof(drvinfo->driver)); | strscpy(drvinfo->bus_info, "bcm63xx", sizeof(drvinfo->bus_info)); | } Note that now bcm_enet_get_drvinfo() and bcm_enetsw_get_drvinfo() do the exact same thing. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90Signed-off-by:
-
- 08 Oct, 2023 1 commit
-
-
Florian Fainelli authored
The driver gained a .ndo_poll_controller() at a time where the TX cleaning process was always done from NAPI which makes this unnecessary. See commit ac3d9dd0 ("netpoll: make ndo_poll_controller() optional") for more background. Signed-off-by:
-
- 06 Oct, 2023 6 commits
-
-
Eric Dumazet authored
Exit early if the list is empty. Some applications using TCP zerocopy are calling recvmsg( ... MSG_ERRQUEUE) and hit this case quite often, probably because busy polling only deals with sk_receive_queue. Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.7 The first pull request for v6.7, with both stack and driver changes. We have a big change how locking is handled in cfg80211 and mac80211 which removes several locks and hopefully simplifies the locking overall. In drivers rtw89 got MCC support and smaller features to other active drivers but nothing out of ordinary. Major changes: cfg80211 - remove wdev mutex, use the wiphy mutex instead - annotate iftype_data pointer with sparse - first kunit tests, for element defrag - remove unused scan_width support mac80211 - major locking rework, remove several locks like sta_mtx, key_mtx etc. and use the wiphy mutex instead - remove unused shifted rate support - support antenna control in frame injection (requires driver support) - convert RX_DROP_UNUSABLE to more detailed reason codes rtw89 - TDMA-based multi-channel concurrency (MCC) support iwlwifi - support set_antenna() operation - support frame injection antenna control ath12k - WCN7850: enable 320 MHz channels in 6 GHz band - WCN7850: hardware rfkill support - WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster ath11k - add chip id board name while searching board-2.bin * tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (272 commits) wifi: rtlwifi: remove unreachable code in rtl92d_dm_check_edca_turbo() wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chips wifi: rtw89: debug: show txpwr table according to chip gen wifi: rtw89: phy: set TX power RU limit according to chip gen wifi: rtw89: phy: set TX power limit according to chip gen wifi: rtw89: phy: set TX power offset according to chip gen wifi: rtw89: phy: set TX power by rate according to chip gen wifi: rtw89: mac: get TX power control register according to chip gen wifi: rtlwifi: use unsigned long for rtl_bssid_entry timestamp wifi: rtlwifi: fix EDCA limit set by BT coexistence wifi: rt2x00: fix MT7620 low RSSI issue wifi: rtw89: refine bandwidth 160MHz uplink OFDMA performance wifi: rtw89: refine uplink trigger based control mechanism wifi: rtw89: 8851b: update TX power tables to R34 wifi: rtw89: 8852b: update TX power tables to R35 wifi: rtw89: 8852c: update TX power tables to R67 wifi: rtw89: regd: configure Thailand in regulation type wifi: mac80211: add back SPDX identifier wifi: mac80211: fix ieee80211_drop_unencrypted_mgmt return type/value wifi: rtlwifi: cleanup few rtlxxxx_set_hw_reg() routines ... ==================== Link: https://lore.kernel.org/r/87jzrz6bvw.fsf@kernel.orgSigned-off-by:
-
Giulio Benetti authored
This patch adds the BCM5221 PHY support by reusing brcm_fet_*() callbacks and adding quirks for BCM5221 when needed. Cc: Jim Reinhart <jimr@tekvox.com> Cc: James Autry <jautry@tekvox.com> Cc: Matthew Maron <matthewm@tekvox.com> Signed-off-by:
Giulio Benetti <giulio.benetti+tekvox@benettiengineering.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== i40e: House-keeping and clean-up Ivan Vecera says: The series makes some house-keeping tasks on i40e driver: Patch 1: Removes unnecessary back pointer from i40e_hw Patch 2: Moves I40E_MASK macro to i40e_register.h where is used Patch 3: Refactors I40E_MDIO_CLAUSE* to use the common macro Patch 4: Add header dependencies to <linux/avf/virtchnl.h> Patch 5: Simplifies memory alloction functions Patch 6: Moves mem alloc structures to i40e_alloc.h Patch 7: Splits i40e_osdep.h to i40e_debug.h and i40e_io.h Patch 8: Removes circular header deps, fixes and cleans headers Patch 9: Moves DDP specific macros and structs to i40e_ddp.c * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: Move DDP specific macros and structures to i40e_ddp.c i40e: Remove circular header dependencies and fix headers i40e: Split i40e_osdep.h i40e: Move memory allocation structures to i40e_alloc.h i40e: Simplify memory allocation functions virtchnl: Add header dependencies i40e: Refactor I40E_MDIO_CLAUSE* macros i40e: Move I40E_MASK macro to i40e_register.h i40e: Remove back pointer from i40e_hw structure ==================== Link: https://lore.kernel.org/r/20231005162850.3218594-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Justin Stitt authored
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect netdev->name to be NUL-terminated based on its use with format strings and dev_info(): | dev_info(&adapter->pdev->dev, | "%s link is up %d Mbps %s\n", | netdev->name, adapter->link_speed, | adapter->link_duplex == FULL_DUPLEX ? | "full duplex" : "half duplex"); Furthermore, NUL-padding is not required as netdev is already zero-initialized through alloc_etherdev(). Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90Signed-off-by:
-
Justin Stitt authored
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. A suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. It should be noted that there doesn't currently exist a bug here as DRV_NAME is a small string literal which means no overread bugs are present. Also to note, other ethernet drivers are using strscpy in a similar pattern: | dec/tulip/tulip_core.c | 861: strscpy(info->driver, DRV_NAME, sizeof(info->driver)); | | 8390/ax88796.c | 582: strscpy(info->driver, DRV_NAME, sizeof(info->driver)); | | dec/tulip/dmfe.c | 1077: strscpy(info->driver, DRV_NAME, sizeof(info->driver)); | | 8390/etherh.c | 558: strscpy(info->driver, DRV_NAME, sizeof(info->driver)); Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90Signed-off-by:
Lukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-asix-ax88796c_ioctl-c-v1-1-6fafdc38b170@google.comSigned-off-by:
-
