- 18 Feb, 2023 3 commits
-
-
Nuno Sá authored
The interrupt is triggered on the falling edge rather than being a level low interrupt. Fixes: da4d3d6b ("iio: adc: ad-sigma-delta: Allow custom IRQ flags") Signed-off-by:
Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230120124645.819910-1-nuno.sa@analog.comSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Nuno Sá authored
For output buffers, there's no guarantee that the buffer won't be full in the first iteration of the loop in which case we would block independently of userspace passing O_NONBLOCK or not. Fix it by always checking the flag before going to sleep. While at it (and as it's a bit related), refactored the loop so that the stop condition is 'written != n', i.e, run the loop until all data has been copied into the IIO buffers. This makes the code a bit simpler. Fixes: 9eeee3b0 ("iio: Add output buffer support") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230216101452.591805-3-nuno.sa@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Nuno Sá authored
If for some reason 'rb->access->write()' does not write the full requested data and the O_NONBLOCK is set, we would return 'n' to userspace which is not really truth. Hence, let's return the number of bytes we effectively wrote. Fixes: 9eeee3b0 ("iio: Add output buffer support") Signed-off-by:
-
- 02 Feb, 2023 2 commits
-
-
Mårten Lindahl authored
There are different init functions for the sensors in this driver in which only one initializes the generic vcnl4000_lock. With commit e21b5b1f ("iio: light: vcnl4000: Preserve conf bits when toggle power") the vcnl4040 sensor started to depend on the lock, but it was missed to initialize it in vcnl4040's init function. This has not been visible until we run lockdep on it: DEBUG_LOCKS_WARN_ON(lock->magic != lock) at kernel/locking/mutex.c:575 __mutex_lock+0x4f8/0x890 Call trace: __mutex_lock mutex_lock_nested vcnl4200_set_power_state vcnl4200_init vcnl4000_probe Fix this by initializing the lock in the probe function instead of doing it in the chip specific init functions. Fixes: e21b5b1f ("iio: light: vcnl4000: Preserve conf bits when toggle power") Signed-off-by:
Mårten Lindahl <marten.lindahl@axis.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230131140109.2067577-1-marten.lindahl@axis.com Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Arnd Bergmann authored
In rare randconfig builds, the missing CRC32 helper causes a link error: ld.lld: error: undefined symbol: crc32_le >>> referenced by usercopy_64.c >>> vmlinux.o:(adis16480_trigger_handler) Fixes: 941f1308 ("iio: adis16480: support burst read function") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
- 28 Jan, 2023 2 commits
-
-
Ian Ray authored
Correct the "sub_lsb" shift for the ltc2497 and drop the sub_lsb element which is now constant. An earlier version of the code shifted by 14 but this was a consequence of reading three bytes into a __be32 buffer and using be32_to_cpu(), so eight extra bits needed to be skipped. Now we use get_unaligned_be24() and thus the additional skip is wrong. Fixes: 2187cfeb ("drivers: iio: adc: ltc2497: LTC2499 support") Signed-off-by:
Ian Ray <ian.ray@ge.com> Link: https://lore.kernel.org/r/20230127125714.44608-1-ian.ray@ge.com Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Andy Shevchenko authored
The node name can contain an address part which is unused by the driver. Moreover, this string is propagated into the userspace label, sysfs filenames *and breaking ABI*. Cut the address part out before assigning the channel name. Fixes: 4f47a236 ("iio: adc: qcom-spmi-adc5: convert to device properties") Reported-by:
Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by:
-
- 21 Jan, 2023 5 commits
-
-
Carlos Song authored
+/-1200uT is a MAGN sensor full measurement range. Magnetometer scale is the magnetic sensitivity parameter. It is referenced as 0.1uT according to datasheet and magnetometer channel unit is Gauss in sysfs-bus-iio documentation. Gauss and uTesla unit conversion relationship as follows: 0.1uT = 0.001Gs. Set magnetometer scale and available magnetometer scale as fixed 0.001Gs. Fixes: 84e5ddd5 ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by:
Carlos Song <carlos.song@nxp.com> Link: https://lore.kernel.org/r/20230118074227.1665098-5-carlos.song@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Carlos Song authored
FXOS8700_CTRL_ODR_MIN is not used but value is probably wrong. Remove it for a good readability. Fixes: 84e5ddd5 ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by:
-
Carlos Song authored
The absence of correct offset leads a failed initialization ODR mode assignment. Select MAX ODR mode as the initialization ODR mode by field mask and FIELD_PREP. Fixes: 84e5ddd5 ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by:
-
Carlos Song authored
The absence of a correct offset leads an incorrect ODR mode readback after use a hexadecimal number to mark the value from FXOS8700_CTRL_REG1. Get ODR mode by field mask and FIELD_GET clearly and conveniently. And attach other additional fix for keeping the original code logic and a good readability. Fixes: 84e5ddd5 ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by:
-
Kai-Heng Feng authored
Commit c1e62062 ("iio: light: cm32181: Handle CM3218 ACPI devices with 2 I2C resources") creates a second client for the actual I2C address, but the "struct device" passed to PM ops is the first I2C client that can't talk to the sensor. That means the I2C transfers in both suspend and resume routines can fail and blocking the whole suspend process. Instead of using the first client for I2C transfer, use the I2C client stored in the cm32181 private struct so the PM ops can get the correct I2C client to really talk to the sensor device. Fixes: 68c1b3dd ("iio: light: cm32181: Add PM support") BugLink: https://bugs.launchpad.net/bugs/1988346 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2152281Tested-by:
Wahaj <wahajaved@protonmail.com> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230118170422.339619-1-kai.heng.feng@canonical.com Cc: <Stable@vger.kernel.org> Signed-off-by:
-
- 14 Jan, 2023 2 commits
-
-
Dmitry Perchanov authored
Return value should be zero for success. This was forgotten for timestamp feature. Verified on RealSense cameras. Fixes: 4648cbd8 ("iio: hid-sensor-gyro-3d: Add timestamp channel") Signed-off-by:
Dmitry Perchanov <dmitry.perchanov@intel.com> Link: https://lore.kernel.org/r/7c1809dc74eb2f58a20595f4d02e76934f8e9219.camel@intel.com Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Dmitry Perchanov authored
Return value should be zero for success. This was forgotten for timestamp feature. Verified on RealSense cameras. Fixes: a96cd0f9 ("iio: accel: hid-sensor-accel-3d: Add timestamp") Signed-off-by:
-
- 08 Jan, 2023 1 commit
-
-
Vladimir Oltean authored
The following kernel linkage error: st_lsm6dsx_core.o: in function `st_lsm6dsx_sw_buffers_setup': st_lsm6dsx_core.c:2578: undefined reference to `devm_iio_triggered_buffer_setup_ext' is caused by the fact that the object owning devm_iio_triggered_buffer_setup_ext() (drivers/iio/buffer/industrialio-triggered-buffer.o) is allowed to be built as module when its user (drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c) is built-in. The st_lsm6dsx driver already has a "select IIO_BUFFER", so add another select for IIO_TRIGGERED_BUFFER, to make that option follow what is set for the st_lsm6dsx driver. This is similar to what other iio drivers do. Fixes: 2cfb2180 ("iio: imu: st_lsm6dsx: introduce sw trigger support") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230103130348.1733467-1-vladimir.oltean@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by:
-
- 28 Dec, 2022 11 commits
-
-
Andreas Kemnade authored
VAC needs to be wired up to produce proper measurements, without this change only near zero values are reported. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Fixes: 1696f364 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver") Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20221217221305.671117-1-andreas@kemnade.infoSigned-off-by:
-
Carlos Song authored
When device is in active mode, it fails to set an ACCEL full-scale range(2g/4g/8g) in FXOS8700_XYZ_DATA_CFG. This is not align with the datasheet, but it is a fxos8700 chip behavior. Keep the device in standby mode before setting ACCEL full-scale range into FXOS8700_XYZ_DATA_CFG in chip initialization phase and setting scale phase. Fixes: 84e5ddd5 ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by:
-
Carlos Song authored
ACCEL output data registers contain the X-axis, Y-axis, and Z-axis 14-bit left-justified sample data and MAGN output data registers contain the X-axis, Y-axis, and Z-axis 16-bit sample data. The ACCEL raw register output data should be divided by 4 before sent to userspace. Apply a 2 bits signed right shift to the raw data from ACCEL output data register but keep that from MAGN sensor as the origin. Fixes: 84e5ddd5 ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by:
-
Carlos Song authored
The length of ACCEL and MAGN 3-axis channels output data is 6 byte individually. However block only read 3 bytes data into buffer from ACCEL or MAGN output data registers every time. It causes an incomplete ACCEL and MAGN channels readback. Set correct value count for regmap_bulk_read to get 6 bytes ACCEL and MAGN channels readback. Fixes: 84e5ddd5 ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by:
-
Carlos Song authored
Because ACCEL and MAGN channels data register base address is swapped the accelerometer and magnetometer channels readback is swapped. Fixes: 84e5ddd5 ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by:
-
Carlos Song authored
FXOS8700 is an IMU sensor with ACCEL sensor and MAGN sensor. Sensor type is indexed by corresponding channel type in a switch. IIO_ANGL_VEL channel type mapped to MAGN sensor has caused confusion. Fix the mapping label of "IIO_MAGN" channel type instead of "IIO_ANGL_VEL" channel type to MAGN sensor. Fixes: 84e5ddd5 ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by:
-
Andreas Kemnade authored
Some inputs need to be wired up to produce proper measurements, without this change only near zero values are reported. Signed-off-by:
-
Frank Li authored
irq flood happen when run cat /sys/bus/iio/devices/iio:device0/in_voltage1_raw imx8qxp_adc_read_raw() { ... enable irq /* adc start */ writel(1, adc->regs + IMX8QXP_ADR_ADC_SWTRIG); ^^^^ trigger irq flood. wait_for_completion_interruptible_timeout(); readl(adc->regs + IMX8QXP_ADR_ADC_RESFIFO); ^^^^ clear irq here. ... } There is only FIFO watermark interrupt at this ADC controller. IRQ line will be assert until software read data from FIFO. So IRQ flood happen during wait_for_completion_interruptible_timeout(). Move FIFO read into irq handle to avoid irq flood. Fixes: 1e23dcaa ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC") Cc: stable@vger.kernel.org Signed-off-by:Frank Li <Frank.Li@nxp.com> Reviewed-by:
Cai Huoqing <cai.huoqing@linux.dev> Reviewed-by:
Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20221201140110.2653501-1-Frank.Li@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Marco Pagani authored
The clang-analyzer reported a warning: "Value stored to 'ret' is never read". Fix the return value check if devm_krealloc() fails to resize ams_channels. Fixes: d5c70627 ("iio: adc: Add Xilinx AMS driver") Signed-off-by:
Marco Pagani <marpagan@redhat.com> Acked-by:
Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20221125113112.219290-1-marpagan@redhat.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Xiongfeng Wang authored
of_get_parent() will return a device_node pointer with refcount incremented. We need to use of_node_put() on it when done. Add the missing of_node_put() in the error path of berlin2_adc_probe(); Fixes: 70f19379 ("iio: adc: add support for Berlin") Signed-off-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20221129020316.191731-1-wangxiongfeng2@huawei.com Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Olivier Moysan authored
When STM32 DFSDM driver is built as module, no modalias information is available. This prevents module to be loaded by udev. Add MODULE_DEVICE_TABLE() to fill module aliases. Fixes: e2e6771c ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by:
Olivier Moysan <olivier.moysan@foss.st.com> Link: https://lore.kernel.org/r/20221202152848.45585-1-olivier.moysan@foss.st.comSigned-off-by:
-
- 25 Dec, 2022 2 commits
-
-
Linus Torvalds authored
-
Steven Rostedt (Google) authored
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/Signed-off-by:Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 23 Dec, 2022 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fix from Mark Brown: "One driver specific change here which handles the case where a SPI device for some reason tries to change the bus speed during a message on fsl_spi hardware, this should be very unusual" * tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fsl_spi: Don't change speed while chipselect is active
-
Linus Torvalds authored
Merge tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Two core fixes here, one for a long standing race which some Qualcomm systems have started triggering with their UFS driver and another fixing a problem with supply lookup introduced by the fixes for devm related use after free issues that were introduced in this merge window" * tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: fix deadlock on regulator enable regulator: core: Fix resolve supply lookup issue
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linuxLinus Torvalds authored
Pull coccicheck update from Julia Lawall: "Modernize use of grep in coccicheck: Use 'grep -E' instead of 'egrep'" * tag 'coccinelle-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: scripts: coccicheck: use "grep -E" instead of "egrep"
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull kernel hardening fixes from Kees Cook: - Fix CFI failure with KASAN (Sami Tolvanen) - Fix LKDTM + CFI under GCC 7 and 8 (Kristina Martsenko) - Limit CONFIG_ZERO_CALL_USED_REGS to Clang > 15.0.6 (Nathan Chancellor) - Ignore "contents" argument in LoadPin's LSM hook handling - Fix paste-o in /sys/kernel/warn_count API docs - Use READ_ONCE() consistently for oops/warn limit reading * tag 'hardening-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: cfi: Fix CFI failure with KASAN exit: Use READ_ONCE() for all oops/warn limit reads security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6 lkdtm: cfi: Make PAC test work with GCC 7 and 8 docs: Fix path paste-o for /sys/kernel/warn_count LoadPin: Ignore the "contents" argument of the LSM hooks
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fixes from Kees Cook: - Switch pmsg_lock to an rt_mutex to avoid priority inversion (John Stultz) - Correctly assign mem_type property (Luca Stefani) * tag 'pstore-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore: Properly assign mem_type property pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "Fix up the sound code to not pass __GFP_COMP to the non-coherent DMA allocator, as it copes with that just as badly as the coherent allocator, and then add a check to make sure no one passes the flag ever again" * tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: reject GFP_COMP for noncoherent allocations ALSA: memalloc: don't use GFP_COMP for non-coherent dma allocations
-
https://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: - improve p9_check_errors to check buffer size instead of msize when possible (e.g. not zero-copy) - some more syzbot and KCSAN fixes - minor headers include cleanup * tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux: 9p/client: fix data race on req->status net/9p: fix response size check in p9_check_errors() net/9p: distinguish zero-copy requests 9p/xen: do not memcpy header into req->rc 9p: set req refcount to zero to avoid uninitialized usage 9p/net: Remove unneeded idr.h #include 9p/fs: Remove unneeded idr.h #include
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull more sound updates from Takashi Iwai: "A few more updates for 6.2: most of changes are about ASoC device-specific fixes. - Lots of ASoC Intel AVS extensions and refactoring - Quirks for ASoC Intel SOF as well as regression fixes - ASoC Mediatek and Rockchip fixes - Intel HD-audio HDMI workarounds - Usual HD- and USB-audio device-specific quirks" * tag 'sound-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (54 commits) ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl() ASoC: lochnagar: Fix unused lochnagar_of_match warning ASoC: Intel: Add HP Stream 8 to bytcr_rt5640.c ASoC: SOF: mediatek: initialize panic_info to zero ASoC: rt5670: Remove unbalanced pm_runtime_put() ASoC: Intel: bytcr_rt5640: Add quirk for the Advantech MICA-071 tablet ASoC: Intel: soc-acpi: update codec addr on 0C11/0C4F product ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume() ASoC: wm8994: Fix potential deadlock ASoC: mediatek: mt8195: add sof be ops to check audio active ASoC: SOF: Revert: "core: unregister clients and machine drivers in .shutdown" ASoC: SOF: Intel: pci-tgl: unblock S5 entry if DMA stop has failed" ALSA: hda/hdmi: fix stream-id config keep-alive for rt suspend ALSA: hda/hdmi: set default audio parameters for KAE silent-stream ALSA: hda/hdmi: fix i915 silent stream programming flow ALSA: hda: Error out if invalid stream is being setup ASoC: dt-bindings: fsl-sai: Reinstate i.MX93 SAI compatible string ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated ASoC: codecs: wcd-clsh: Remove the unused function ...
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Holiday fixes! Two batches from amd, and one group of i915 changes. amdgpu: - Spelling fix - BO pin fix - Properly handle polaris 10/11 overlap asics - GMC9 fix - SR-IOV suspend fix - DCN 3.1.4 fix - KFD userptr locking fix - SMU13.x fixes - GDS/GWS/OA handling fix - Reserved VMID handling fixes - FRU EEPROM fix - BO validation fixes - Avoid large variable on the stack - S0ix fixes - SMU 13.x fixes - VCN fix - Add missing fence reference amdkfd: - Fix init vm error handling - Fix double release of compute pasid i915 - Documentation fixes - OA-perf related fix - VLV/CHV HDMI/DP audio fix - Display DDI/Transcoder fix - Migrate fixes" * tag 'drm-next-2022-12-23' of git://anongit.freedesktop.org/drm/drm: (39 commits) drm/amdgpu: grab extra fence reference for drm_sched_job_add_dependency drm/amdgpu: enable VCN DPG for GC IP v11.0.4 drm/amdgpu: skip mes self test after s0i3 resume for MES IP v11.0 drm/amd/pm: correct the fan speed retrieving in PWM for some SMU13 asics drm/amd/pm: bump SMU13.0.0 driver_if header to version 0x34 drm/amdgpu: skip MES for S0ix as well since it's part of GFX drm/amd/pm: avoid large variable on kernel stack drm/amdkfd: Fix double release compute pasid drm/amdkfd: Fix kfd_process_device_init_vm error handling drm/amd/pm: update SMU13.0.0 reported maximum shader clock drm/amd/pm: correct SMU13.0.0 pstate profiling clock settings drm/amd/pm: enable GPO dynamic control support for SMU13.0.7 drm/amd/pm: enable GPO dynamic control support for SMU13.0.0 drm/amdgpu: revert "generally allow over-commit during BO allocation" drm/amdgpu: Remove unnecessary domain argument drm/amdgpu: Fix size validation for non-exclusive domains (v4) drm/amdgpu: Check if fru_addr is not NULL (v2) drm/i915/ttm: consider CCS for backup objects drm/i915/migrate: fix corner case in CCS aux copying drm/amdgpu: rework reserved VMID handling ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: "Fixes due to DT changes" * tag 'mips_6.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: dts: bcm63268: Add missing properties to the TWD node MIPS: ralink: mt7621: avoid to init common ralink reset controller
-
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2022-12-22-14-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "Eight fixes, all cc:stable. One is for gcov and the remainder are MM" * tag 'mm-hotfixes-stable-2022-12-22-14-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: gcov: add support for checksum field test_maple_tree: add test for mas_spanning_rebalance() on insufficient data maple_tree: fix mas_spanning_rebalance() on insufficient data hugetlb: really allocate vma lock for all sharable vmas kmsan: export kmsan_handle_urb kmsan: include linux/vmalloc.h mm/mempolicy: fix memory leak in set_mempolicy_home_node system call mm, mremap: fix mremap() expanding vma with addr inside vma
-
Luca Stefani authored
If mem-type is specified in the device tree it would end up overriding the record_size field instead of populating mem_type. As record_size is currently parsed after the improper assignment with default size 0 it continued to work as expected regardless of the value found in the device tree. Simply changing the target field of the struct is enough to get mem-type working as expected. Fixes: 9d843e8f ("pstore: Add mem_type property DT parsing support") Cc: stable@vger.kernel.org Signed-off-by:
Luca Stefani <luca@osomprivacy.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221222131049.286288-1-luca@osomprivacy.com
-
