- 06 Oct, 2016 4 commits
-
-
Paul Burton authored
Add a driver for simple ASCII LCD displays found on the MIPS Boston, Malta & SEAD3 development boards. The Boston display is an independent memory mapped device with a simple memory mapped 8 byte register space containing the 8 ASCII characters to display. The Malta display is exposed as part of the Malta board registers, and provides 8 registers each of which corresponds to one of the ASCII characters to display. The SEAD3 display is slightly more complex, exposing an interface to an S6A0069 LCD controller via registers provided by the boards CPLD. However although the displays differ in their register interface, we require similar functionality on each board so abstracting away the differences within a single driver allows us to share a significant amount of code & ensure consistent behaviour. The driver displays the Linux kernel version as the default message, but allows the message to be changed via a character device. Messages longer then the number of characters that the display can show will scroll. This provides different behaviour to the existing LCD display code for the MIPS Malta or MIPS SEAD3 platforms in the following ways: - The default string to display is not "LINUX ON MALTA" or "LINUX ON SEAD3" but "Linux" followed by the version number of the kernel (UTS_RELEASE). - Since that string tends to be significantly longer it scrolls twice as fast, moving every 500ms rather than every 1s. - The LCD won't be updated until the driver is probed, so it doesn't provide the early "LINUX" string. Signed-off-by:Paul Burton <paul.burton@imgtec.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14062/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
Add documentation for a devicetree binding for the simple ASCII LCD displays found on development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3 from Imagination Technologies. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14061/Signed-off-by:
-
Paul Burton authored
The SEAD3 board no longer uses the cobalt_lcdfb driver, so remove the SEAD3-specific code from it. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Ondrej Zary <linux@rainbow-software.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: linux-mips@linux-mips.org Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14060/Signed-off-by:
-
Paul Burton authored
The 2 line * 16 character LCD display on the SEAD3 board has no real use as a framebuffer device. It's far too small to produce any meaningful output if used as the kernel console, SEAD3 is a development board that will essentially always have a far more useful UART connection & the code in sead3-display.c will overwrite whatever's on the display every second anyway. Remove this unused code. Signed-off-by:
-
- 04 Oct, 2016 36 commits
-
-
Paul Burton authored
Parse the memsize argument provided by the bootloader in the DT shim code, allowing the user to override it on the command line. This places all of the DT manipulation code into sead3-dtshim.c. Signed-off-by:
-
Paul Burton authored
Remove the custom platform code to restart when instructed to power off, instead relying upon the generic restart-poweroff driver probed via DT to do the same thing. Remove also the halt implementation, which is incorrect. The generic MIPS version will hang the system as halt should. Signed-off-by:
-
Paul Burton authored
Remove the SEAD3 implementation of _machine_restart & instead make use of the generic syscon-reboot driver probed via device tree. Signed-off-by:
-
Paul Burton authored
Probe a driver for the PLED & FLED LEDs found on the SEAD3 board using the register-bit-led driver via device tree, rather than a custom driver via platform code. Enable support for the register-bit-led driver & its prerequisite syscon in sead3_defconfig. Signed-off-by:
-
Paul Burton authored
Probe the system parallel flash using device tree rather than platform code, in order to reduce the amount of the latter. Signed-off-by:
-
Paul Burton authored
The SEAD-3 board is now probing its EHCI controller using the generic EHCI driver & its generic-ehci device tree binding. Remove the unused SEAD-3 specific EHCI code. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: linux-usb@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14052/Signed-off-by:
-
Paul Burton authored
Probe the SEAD3 EHCI controller using the generic-ehci driver & device tree rather than platform code, in order to reduce the amount of the latter. Now that no devices probed from platform code require interrupts, remove the retrieval of the IRQ domain & sead3int.h. Signed-off-by:
-
Paul Burton authored
Probe the smsc911x ethernet controller using device tree rather than platform code, reducing the amount of the latter. Signed-off-by:
-
Paul Burton authored
Stop selecting SYS_HAS_EARLY_PRINTK & remove the custom support for early output to the ns16550a UARTs, instead relying upon generic ns16550a earlycon support. This reduces the amount of platform code required for SEAD3 without losing any functionality. Signed-off-by:
-
Paul Burton authored
Probe the UARTs on SEAD3 boards using device tree rather than platform code, in order to reduce the amount of the latter. This requires that CONFIG_SERIAL_OF_PLATFORM be enabled, so enable it in sead3_defconfig. The SEAD3 DT shim code is extended to read bootloader environment variables to determine the appropriate UART & mode for kernel console output & set the stdout-path property of the chosen node accordingly. In contrast to the old platform code, which appears to have only ever set "console=ttyS0,38400n8r" with the code in console_config never having an effect, this will honor the "yamontty" environment variable to select between the 2 UARTs on the board and then check the "modetty0" or "modetty1" variable as appropriate to determine the UART configuration. Signed-off-by:
-
Paul Burton authored
Probe the CPU interrupt controller & optional Global Interrupt Controller (GIC) using devicetree rather than platform code. Because the bootloader on SEAD3 does not provide a device tree to the kernel & the device tree is always built in, we patch out the GIC node during boot if we detect that a GIC is not present in the system. The appropriate IRQ domain is discovered by platform code setting up device IRQ numbers temporarily. It will be removed by further patches which move the devices towards being probed via device tree. No behavioural change is intended by this patch. Signed-off-by:
-
Paul Burton authored
Split the obj-y entries for SEAD3 onto a line each, so that they're more independent & can be modified more clearly by later commits. Signed-off-by:
-
Paul Burton authored
The MIPS Coherent Processing System (CPS) power management code has previously generated code used to enter low power idle states once during boot for all CPUs. This has the drawback that if a CPU is present in the system but not being used (for example due to the maxcpus kernel parameter) then we encounter problems due to not having probed that CPU for information about its type & properties. The result of this is that we generate entry code which is both unused, potentially entirely invalid & likely to be unsuitable for the CPU in question anyway. Avoid this by generating idle state entry code only when a CPU is brought online. This way we only ever generate code for CPUs that we know we've probed the properties of, and that will actually be used. [ralf@linux-mips.org: Resolve merge conflict.] Signed-off-by:
-
Paul Gortmaker authored
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of kvm where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace as needed. In this case, we did not need to add either to any files. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by:
James Hogan <james.hogan@imgtec.com> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14036/Signed-off-by:
-
Paul Gortmaker authored
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. We also needed to remove the no-op MODULE_DEVICE_TABLE usage in several instances to permit removal of the module.h include. The files in these instances were all controlled by bool Kconfig. In one instance, module_param was being used so we transition the module.h include onto a moduleparam.h include. Signed-off-by:
-
Paul Gortmaker authored
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. The compiler.h additions are for an implict presence of the "notrace" which module.h brought in but export.h does not. Signed-off-by:
-
Paul Gortmaker authored
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. Signed-off-by:
-
Paul Gortmaker authored
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. In the case of the n32/o32 files, we have to get rid of a couple no-op MODULE_ tags to facilitate the module.h removal. They piggy back off the fs/ elf binary support, which is also a bool Kconfig. Signed-off-by:
-
Ralf Baechle authored
Signed-off-by: -
Matt Redfearn authored
For the MIPS remote processor implementation, we need additional IPIs to talk to the remote processor. Since MIPS GIC reserves exactly the right number of IPI IRQs required by Linux for the number of VPs in the system, this is not possible without releasing some recources. This commit introduces mips_smp_ipi_allocate() which allocates IPIs to a given cpumask. It is called as normal with the cpu_possible_mask at bootup to initialise IPIs to all CPUs. mips_smp_ipi_free() may then be used to free IPIs to a subset of those CPUs so that their hardware resources can be reused. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Lisa Parratt <Lisa.Parratt@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-remoteproc@vger.kernel.org Cc: lisa.parratt@imgtec.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14285/Signed-off-by:
-
Matt Redfearn authored
When adding a wired entry to the TLB via add_wired_entry, the tlb is flushed with local_flush_tlb_all, which on CPUs with TLBINV results in the new wired entry being flushed again. Behavior of the TLBINV instruction applies to all applicable TLB entries and is unaffected by the setting of the Wired register. Therefore if the TLB has any wired entries, fall back to iterating over the entries rather than blasting them all using TLBINVF. Signed-off-by:
-
James Hogan authored
flush_icache_range() flushes icache lines in a protected fashion for kernel addresses, however this isn't correct with EVA where protected cache ops only operate on user addresses, making flush_icache_range() ineffective. Split the implementations of __flush_icache_user_range() from flush_icache_range(), changing the normal flush_icache_range() to use unprotected normal cache ops. Signed-off-by:
-
James Hogan authored
Convert KVM dynamic translation of guest instructions to flush icache for guest mapped addresses using the new __local_flush_icache_user_range() API to allow the more generic flush_icache_range() to be changed to work on kernel addresses only. Signed-off-by:
-
James Hogan authored
Update arch_uprobe_copy_ixol() to use the kmap_atomic() based kernel address to flush the icache with flush_icache_range(), rather than the user mapping. We have the kernel mapping available anyway and this avoids having to switch to using the new __flush_icache_user_range() for the sake of Enhanced Virtual Addressing (EVA) where flush_icache_range() will become ineffective on user addresses. Signed-off-by:
-
James Hogan authored
The cacheflush(2) system call uses flush_icache_range() to flush a range of usermode addresses from the icache, so change it to utilise the new __flush_icache_user_range() API to allow the more generic flush_icache_range() to be changed to work on kernel addresses only. Signed-off-by:
-
James Hogan authored
flush_icache_range() is used for both user addresses (i.e. cacheflush(2)), and kernel addresses (as the API documentation describes). This isn't really suitable however for Enhanced Virtual Addressing (EVA) where cache operations on usermode addresses must use a different instruction, and the protected cache ops assume user addresses, making flush_icache_range() ineffective on kernel addresses. Split out a new __flush_icache_user_range() and __local_flush_icache_user_range() for users which actually want to flush usermode addresses (note that flush_icache_user_range() already exists on various architectures but with different arguments). The implementation of flush_icache_range() will be changed in an upcoming commit to use unprotected normal cache ops so as to always work on the kernel mode address space. Signed-off-by:
-
James Hogan authored
The EVA conditional bc_wback_inv() at the end of flush_icache_range() to flush the modified code all the way back to RAM was apparently there for debug purposes and to accommodate the Malta EVA configuration which makes use of a physical alias, and didn't use the CP0_EBase.WG (Write Gate) bit to put the exception vector in the same physical alias where the exception vector code is written and is being flushed. Now that CP0_EBase.WG is used, lets drop this flush. Signed-off-by:
-
Matt Redfearn authored
On CPUs which support the EBase WG (write gate) flag, the most significant bits of the exception base can be changed. Firmware running on a VP(E) using MIPS rproc may change EBase to point into the user segment where the firmware is located such that it can service interrupts. When control is transferred back to the kernel the EBase must be switched back into the kernel segment, such that the kernel's exception vectors are used. Similarly when vectored interrupts (vint) or vectored external interrupt controllers (veic) are enabled an exception vector is allocated from bootmem, and written to the EBase register. Due to the WG flag being clear, only bits 29:12 will be written. Asside from the rproc case above this is normally fine (as it will usually be a low allocation within the KSeg0 range, however when Enhanced Virtual Addressing (EVA) is enabled the allocation may be outside of the traditional KSeg0/KSeg1 address range, resulting in the wrong EBase being written. Correct both cases (configure_exception_vector() for the boot CPU, and per_cpu_trap_init() for secondary CPUs) to write EBase with the WG flag first if supported. On the Malta EVA configuration, KSeg0 is mapped to physical address 0, and memory is allocated from the KUSeg segment which is mapped to physical address 0x80000000, which physically aliases the RAM at 0. This only worked due to the exception base address aliasing the same underlying RAM that was written to & cache flushed, and due to flush_icache_range() going beyond the call of duty and flushing from the L2 cache too (due to the differing physical addresses). Signed-off-by:
-
James Hogan authored
When allocating boot memory for the exception vector when vectored interrupts (vint) or vectored external interrupt controllers (veic) are enabled, try to ensure that the virtual address resides in KSeg0 (and WARN should that not be possible). This will be helpful on MIPS64 cores supporting the CP0_EBase Write Gate (WG) bit once we start using the WG bit to write the full ebase into CP0_EBase, as we ideally need to avoid hitting the architecturally poorly defined exception base for Cache Errors when CP0_EBase is in XKPhys. An exception is made for Enhanced Virtual Addressing (EVA) kernels which allow segments to be rearranged and to become uncached during cache error handling, making it valid for ebase to be elsewhere. Signed-off-by:
-
James Hogan authored
When reading the CP0_EBase register containing the WG (write gate) bit, the ebase variable should be set to the full value of the register, i.e. on a 64-bit kernel the full 64-bit width of the register via read_cp0_ebase_64(), and on a 32-bit kernel the full 32-bit width including bits 31:30 which may be writeable. Signed-off-by:
-
Matt Redfearn authored
This patch enables the MIPS CPS driver for MIPSr6 CPUs. Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-mips@linux-mips.org Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14228/Signed-off-by:
-
Matt Redfearn authored
All calls to mips_cpc_lock_other should be wrapped in mips_cm_lock_other. This only matters if the system has CM3 and is using cpu idle, since otherwise a) the CPC lock is sufficent for CM < 3 and b) any systems with CM > 3 have not been able to use cpu idle until now. Signed-off-by:
-
Matt Redfearn authored
MIPS CM3 changed the management of coherence. Instead of a coherence control register with a bitmask of coherent domains, CM3 simply has a coherence enable register with a single bit to enable coherence of the local core. Support this by clearing and setting this single bit to disable / enable coherence. Signed-off-by:
-
Matt Redfearn authored
This patch adds support for CPUs implementing the MIPSr6 ISA to the CPS power management code. Three changes are necessary: 1. In MIPSr6, coupled coherence is necessary when CPUS implement multiple Virtual Processors (VPs). 2. MIPSr6 virtual processors are more like real cores and cannot yield to other VPs on the same core, so drop the MT ASE yield instruction. 3. To halt a MIPSr6 VP, the CPC VP_STOP register is used rather than the MT ASE TCHalt CP0 register. Signed-off-by:
-
Matt Redfearn authored
Instead of selecting an implementation or vendor specific sync type for the required sync operations, always use the architecturally mandated sync types which previous patches have put in place. The selection of special sync types is now redundant an can be removed. Signed-off-by:
-
Matt Redfearn authored
SYNC type 0 is defined in the MIPS architecture as a completion barrier where all loads/stores in the pipeline before the sync instruction must complete before any loads/stores subsequent to the sync instruction. In places where we require loads / stores be globally completed, use the standard completion sync stype. Signed-off-by:
-
