Use $(FULL_AMD_PATH) like everything else.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

tdp_table is being leaked on failed allocations of
hwmgr->dyn_state.cac_dtp_table. kfree tdp_table on the error
return path to fix the leak.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Christian König <christian.koenig@amd.com.
Signed-off-by: Dave Airlie <airlied@redhat.com>

A few other misc cleanups and bug fixes for 4.6.  Highlights:
- unify endian handling in powerplay
- powerplay fixes
- fix a regression in 4.5 on boards with no display connectors
- fence cleanups and locking fixes
- whitespace cleanups and code refactoring in radeon

* 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux: (35 commits)
  drm/amdgpu/gfx7: add MTYPE definition
  drm/amdgpu: removing BO_VAs shouldn't be interruptible
  drm/amd/powerplay: show uvd/vce power gate enablement for tonga.
  drm/amd/powerplay: show uvd/vce power gate info for fiji
  drm/amdgpu: use sched fence if possible
  drm/amdgpu: move ib.fence to job.fence
  drm/amdgpu: give a fence param to ib_free
  drm/amdgpu: include the right version of gmc header files for iceland
  drm/radeon: fix indentation.
  drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ
  drm/amdgpu: switch back to 32bit hw fences v2
  drm/amdgpu: remove amdgpu_fence_is_signaled
  drm/amdgpu: drop the extra fence range check v2
  drm/amdgpu: signal fences directly in amdgpu_fence_process
  drm/amdgpu: cleanup amdgpu_fence_wait_empty v2
  drm/amdgpu: keep all fences in an RCU protected array v2
  drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring
  drm/amdgpu: RCU protected amd_sched_fence_release
  drm/amdgpu: RCU protected amdgpu_fence_release
  drm/amdgpu: merge amdgpu_fence_process and _activity
  ...

Commit 8a2fa38f removed the mode_fixup because it was empty,
but 652353e6 modified it to call drm_mode_set_crtcinfo()
instead.

Both commits are correct, but the merge of the two kept the nonempty
version without the reference to it, as shown by the gcc warning:

 drm/sti/sti_crtc.c:54:13: error: 'sti_crtc_mode_fixup' defined but not used

This restores the callback pointer to fix the merge.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reverts: 8a2fa38f ("drm/sti: removed optional dummy crtc mode_fixup function.")
Fixes: 652353e6 ("drm/sti: set CRTC modesetting parameters")
Fixes: cf481068 ("Merge branch '2016-02-26-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next")
Acked-by: Vincent ABRIOU <vincent.abriou@st.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

when preemption feature lands, the SA bo should rely on sched
fence, because hw fence will be invalid after its job preempted
or skipped.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

thus amdgpu_ib_free() can hook sched fence to SA manager
in later patches.

BTW:
for amdgpu_free_job(), it should only fence_put() the
fence of the last ib once, so fix it as well in this patch.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Merge branch '2016-02-26-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next

Here are sti patches for drm-next.
It brings:
  - The support of the atomic_check for the planes and minor fixes for
planes
  - The support of the vendor specific infoframe for HDMI and the
support of 2 HDMI properties related to the connector
  - The support of the DVO solving panel detection issue and timing issue.
  - The support of debugfs for connectors, encoders, crtcs and planes.

* '2016-02-26-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel: (36 commits)
  drm/sti: use u32 to store DMA addresses
  drm: sti: remove sti_gem_prime_export hack
  drm/sti: add debugfs fps_show/fps_get mechanism for planes
  drm/sti: add debugfs entries for TVOUT encoders
  drm/sti: add debugfs entries for MIXER crtc
  drm/sti: add debugfs entries for VID plane
  drm/sti: add debugfs entries for HQVDP plane
  drm/sti: add debugfs entries for GDP planes
  drm/sti: add debugfs entries for CURSOR plane
  drm/sti: add debugfs entries for HDA connector
  drm/sti: add debugfs entries for DVO connector
  drm/sti: add debugfs entries for HDMI connector
  drm/sti: add hdmi_mode property for HDMI connector
  drm/sti: add colorspace property to the HDMI connector
  drm/sti: add HDMI vendor specific infoframe
  drm/sti: reset infoframe transmission when HDMI is stopped
  drm/sti: HDMI infoframe transmission mode not take into account
  drm/sti: reset HD DACS when HDA connector is created
  drm/sti: fix dvo data_enable signal
  drm/sti: adjust delay for DVO
  ...

A few more fixes and cleanups for 4.6:
- DCE code cleanups
- HDP flush/invalidation fixes
- GPUVM fixes
- switch to drm_vblank_[on|off]
- PX fixes
- misc bug fixes

* 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux: (50 commits)
  drm/amdgpu: split pipeline sync out of SDMA vm_flush() as well
  drm/amdgpu: Revert "add mutex for ba_va->valids/invalids"
  drm/amdgpu: Revert "add lock for interval tree in vm"
  drm/amdgpu: Revert "add spin lock to protect freed list in vm (v3)"
  drm/amdgpu: reserve the PD during unmap and remove
  drm/amdgpu: Fix two bugs in amdgpu_vm_bo_split_mapping
  drm/radeon: Don't drop DP 2.7 Ghz link setup on some cards.
  MAINTAINERS: update radeon entry to include amdgpu as well
  drm/amdgpu: disable runtime pm on PX laptops without dGPU power control
  drm/radeon: disable runtime pm on PX laptops without dGPU power control
  drm/amd/amdgpu: Fix indentation in do_set_base() (DCEv8)
  drm/amd/amdgpu: make afmt_init cleanup if alloc fails (DCEv8)
  drm/amd/amdgpu: Move config init flag to bottom of sw_init (DCEv8)
  drm/amd/amdgpu: Don't proceed into audio_fini if audio is disabled (DCEv8)
  drm/amd/amdgpu: Fix identation in do_set_base() (DCEv10)
  drm/amd/amdgpu: Make afmt_init cleanup if alloc fails (DCEv10)
  drm/amd/amdgpu: Move initialized flag to bottom of sw_init (DCEv10)
  drm/amd/amdgpu: Don't proceed in audio_fini if disabled (DCEv10)
  drm/amd/amdgpu: Fix indentation in dce_v11_0_crtc_do_set_base()
  drm/amd/amdgpu: Make afmt_init() cleanup if alloc fails (DCEv11)
  ...

Pull request of 2016-03-16

* tag 'vmwgfx-next-160316' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Bump driver minor
  drm/vmwgfx: Allow the UPDATE_LAYOUT ioctl from control nodes
  drm/vmwgfx: Send a hotplug event at master_set
  drm/vmwgfx: Default to explicit crtc placement for screen targets and screen objects
  drm/vmwgfx: Calculate the cursor position based on the crtc gui origin
  drm/vmwgfx: Add connector properties to switch between explicit and implicit placement
  drm/vmwgfx: Add suggested screen x and y connector properties
  drm/vmwgfx: Add implicit framebuffer checks to the screen target code
  drm/vmwgfx: Break out implicit fb code
  drm/vmwgfx: Rework screen target page flips v2
  drm/vmwgfx: Fix screen object page flips for large framebuffers
  drm/vmwgfx: Fix a screen object framebuffer dirty corner case
  drm/vmwgfx: Add DXGenMips support

Merge tag 'drm-intel-next-fixes-2016-03-16' of http://anongit.freedesktop.org/git/drm-intel into drm-next

* tag 'drm-intel-next-fixes-2016-03-16' of http://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Handle -EDEADLK in drm_atomic_commit from load-detect.

drm/panel: Changes for v4.6-rc1

This contains a refactoring of parts of the DSI core to allow creating
DSI devices from non-DSI control busses (i.e. I2C, SPI, ...).

Other than that there's support for a couple of new panels as well as
a few cleanup patches.

* tag 'drm/panel/for-4.6-rc1' of http://anongit.freedesktop.org/git/tegra/linux:
  drm/bridge: Make (pre/post) enable/disable callbacks optional
  drm/panel: simple: Add URT UMSH-8596MD-xT panels support
  dt-bindings: Add URT UMSH-8596MD-xT panel bindings
  of: Add United Radiant Technology Corporation vendor prefix
  drm/panel: simple: Support for LG lp120up1 panel
  dt-bindings: Add LG lp120up1 panel bindings
  drm/panel: simple: Fix g121x1_l03 hsync/vsync polarity
  drm/dsi: Get DSI host by DT device node
  drm/dsi: Add routine to unregister a DSI device
  drm/dsi: Try to match non-DT DSI devices
  drm/dsi: Use mipi_dsi_device_register_full() for DSI device creation
  drm/dsi: Check for CONFIG_OF when defining of_mipi_dsi_device_add()

drm/tegra: Changes for v4.6-rc1

Only two cleanups this time around. One fixes reference counting of
device tree nodes, the other changes the return value of a function
from an unsigned int to an int to reflect that it will return error
codes.

* tag 'drm/tegra/for-4.6-rc1' of http://anongit.freedesktop.org/git/tegra/linux:
  gpu: host1x: Use a signed return type for do_relocs()
  gpu: host1x: bus: Add missing of_node_put()

I hate doing this but it hurts my eyes to go over code that does not
comply with indentation rules. Only thing that is not only space change
is in atom.c all other files are space indentation issues.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Set the UVD and VCE DPM flags otherwise UVD and VCE DPM won't get enabled.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Cc: stable@vger.kernel.org

We don't need to extend them to 64bits any more, so avoid the extra overhead.

v2: update commit message.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>

It's just overhead to check the fence value
when we signal them directly anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>

Amdgpu doesn't support using scratch registers for fences any more.
So we won't see values like 0xdeadbeef as fence value any more.

v2: reschedule timer even if no change detected
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>

Because of the scheduler we need to signal all fences immediately
anyway, so try to avoid the waitqueue overhead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>

Just wait for last fence instead of waiting for the sequence manually.

v2: don't use amdgpu_sched_jobs for the mask
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>

Just keep all HW fences in a RCU protected array as a
first step to replace the wait queue.

v2: update commit message, move fixes into separate patch.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>

Make this a parameter instead of using the global variable directly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>

Fences must be freed RCU protected, otherwise the reservation_object_*_rcu()
functions can run into problems.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Fences must be freed RCU protected, otherwise the reservation_object_*_rcu()
functions can run into problems.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

No need to keep the two separate any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>

The comment about the loop counter was never valid, even when you have
multiple threads this loop only runs as long as the sequence increases.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>

The return type "unsigned int" was used by the do_relocs() function
despite the fact that it will eventually return a negative error code.
Use a signed integer instead to accomodate for error codes.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>

for_each_child_of_node() performs an of_node_get() on each iteration, so
to break out of the loop an of_node_put() is required.

Found using Coccinelle. The semantic patch used for this is as follows:

// <smpl>
@@
expression e;
local idexpression n;
@@

 for_each_child_of_node(..., n) {
   ... when != of_node_put(n)
       when != e = n
(
   return n;
|
+  of_node_put(n);
?  return ...;
)
   ...
 }
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

signals availability of resolutionKMS support
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclar Yeh <syeh@vmware.com>

gcc-6 warns about code in the nouveau driver that is obviously silly:

drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c: In function 'nv40_perfctr_next':
drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c:62:19: warning: self-comparison always evaluats to false [-Wtautological-compare]
  if (pm->sequence != pm->sequence) {

The behavior was accidentally introduced in a patch described as "This is
purely preparation for upcoming commits, there should be no code changes here.".
As far as I can tell, that was true for the rest of that patch except for
this one function, which has been changed to a NOP.

This patch restores the original behavior.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 8c1aeaa1 ("drm/nouveau/pm: cosmetic changes")
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

* tag 'topic/drm-misc-2016-03-14' of git://anongit.freedesktop.org/drm-intel: (27 commits)
  drm: atomic helper: do not unreference error pointer
  drm/edid: Extract SADs properly from multiple audio data blocks
  drm: fix blob pointer check
  drm: introduce pipe color correction properties
  drm/atomic: Clean up update_connector_routing.
  drm/atomic: Clean up steal_encoder, v2.
  drm/atomic: Handle encoder assignment conflicts in a separate check, v3.
  drm/atomic: Handle encoder stealing from set_config better.
  drm/atomic: Always call steal_encoder, v2.
  drm/ast: removed optional dummy crtc mode_fixup function.
  drm/bochs: removed optional dummy crtc mode_fixup function.
  drm/fsl-dcu: removed optional dummy crtc mode_fixup function.
  drm/virtio: removed optional dummy crtc mode_fixup function.
  drm/nouveau/dispnv04: removed optional dummy crtc mode_fixup function.
  drm/atmel-hlcdc: remove optional dummy crtc mode_fixup function.
  drm/sti: removed optional dummy crtc mode_fixup function.
  drm/shmobile: removed optional dummy crtc mode_fixup function.
  drm/msm/mdp: removed optional dummy crtc mode_fixup function.
  drm/omapdrm: removed optional dummy crtc mode_fixup function.
  drm/rcar-du: removed optional dummy crtc mode_fixup function.
  ...

Merge tag 'drm-amdkfd-next-fixes-2016-03-15' of git://people.freedesktop.org/~gabbayo/linux into drm-next

* tag 'drm-amdkfd-next-fixes-2016-03-15' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: uninitialized variable in dbgdev_wave_control_set_registers()

The recent changes which removed platform data support from panels &
encoders had a few mistakes, causing probes of DVI connector and DSI
command mode panels to fail every time due to missing '!'. Fix the
if()s.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

At the end of the function we expect "status" to be zero, but it's
either -EINVAL or uninitialized.

Fixes: 788bf83d ('drm/amdkfd: Add wave control operation to debugger')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>