- 31 May, 2024 9 commits
-
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe fixes via Keith: - Removing unused fields (Kanchan) - Large folio offsets support (Kundan) - Multipath NUMA node initialiazation fix (Nilay) - Multipath IO stats accounting fixes (Keith) - Circular lockdep fix (Keith) - Target race condition fix (Sagi) - Target memory leak fix (Sagi) - bcache fixes - null_blk fixes (Damien) - Fix regression in io.max due to throttle low removal (Waiman) - DM limit table fixes (Christoph) - SCSI and block limit fixes (Christoph) - zone fixes (Damien) - Misc fixes (Christoph, Hannes, hexue) * tag 'block-6.10-20240530' of git://git.kernel.dk/linux: (25 commits) blk-throttle: Fix incorrect display of io.max block: Fix zone write plugging handling of devices with a runt zone block: Fix validation of zoned device with a runt zone null_blk: Do not allow runt zone with zone capacity smaller then zone size nvmet: fix a possible leak when destroy a ctrl during qp establishment nvme: use srcu for iterating namespace list bcache: code cleanup in __bch_bucket_alloc_set() bcache: call force_wake_up_gc() if necessary in check_should_bypass() bcache: allow allocator to invalidate bucket in gc block: check for max_hw_sectors underflow block: stack max_user_sectors sd: also set max_user_sectors when setting max_sectors null_blk: Print correct max open zones limit in null_init_zoned_dev() block: delete redundant function declaration null_blk: Fix return value of nullb_device_power_store() dm: make dm_set_zones_restrictions work on the queue limits dm: remove dm_check_zoned dm: move setting zoned_enabled to dm_table_set_restrictions block: remove blk_queue_max_integrity_segments nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset ... -
git://git.kernel.dk/linuxLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A couple of minor fixes for issues introduced in the 6.10 merge window: - Ensure that all read/write ops have an appropriate cleanup handler set (Breno) - Regression for applications still doing multiple mmaps even if FEAT_SINGLE_MMAP is set (me) - Move kmsg inquiry setting above any potential failure point, avoiding a spurious NONEMPTY flag setting on early error (me)" * tag 'io_uring-6.10-20240530' of git://git.kernel.dk/linux: io_uring/net: assign kmsg inq/flags before buffer selection io_uring/rw: Free iovec before cleaning async data io_uring: don't attempt to mmap larger than what the user asks for -
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: - dma-mapping benchmark error handling fixes (Fedor Pchelkin) - correct a config symbol reference in the DMA API documentation (Lukas Bulwahn) * tag 'dma-mapping-6.10-2024-05-31' of git://git.infradead.org/users/hch/dma-mapping: Documentation/core-api: correct reference to SWIOTLB_DYNAMIC dma-mapping: benchmark: handle NUMA_NO_NODE correctly dma-mapping: benchmark: fix node id validation dma-mapping: benchmark: avoid needless copy_to_user if benchmark fails dma-mapping: benchmark: fix up kthread-related error handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Lots of small fixes: - A race fix for debugfs handling in ALSA core - A series of corrections for MIDI2 core format conversions - ASoC Intel fixes for 16 bit DMIC config - Updates for missing module parameters in ASoC code - HD-audio quirk, Cirrus codec fix, etc minor fixes" * tag 'sound-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits) ALSA: seq: ump: Fix swapped song position pointer data ASoC: SOF: ipc4-topology: Adjust the params based on DAI formats ASoC: SOF: ipc4-topology: Improve readability of sof_ipc4_prepare_dai_copier() ASoC: SOF: ipc4-topology/pcm: Rename sof_ipc4_copier_is_single_format() ASoC: SOF: ipc4-topology: Print out the channel count in sof_ipc4_dbg_audio_format ASoC: SOF: ipc4-topology: Add support for NHLT with 16-bit only DMIC blob ALSA: seq: Fix yet another spot for system message conversion ALSA: ump: Set default protocol when not given explicitly ALSA: ump: Don't accept an invalid UMP protocol number ASoC: SOF: ipc4-topology: Fix input format query of process modules without base extension ASoC: Intel: sof-sdw: fix missing SPI_MASTER dependency ALSA: pcm: fix typo in comment ALSA: ump: Don't clear bank selection after sending a program change ALSA: seq: Fix incorrect UMP type for system messages ALSA/hda: intel-dsp-config: reduce log verbosity ALSA: seq: Don't clear bank selection at event -> UMP MIDI2 conversion ALSA: seq: Fix missing bank setup between MIDI1/MIDI2 UMP conversion ASoC: SOF: add missing MODULE_DESCRIPTION() ASoC: SOF: reorder MODULE_ definitions ASoC: SOF: AMD: group all module related information ...
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - a use-after-free bugfix - Kconfig fixes for randconfig builds - allow setting touchscreen_dmi quirks from the cmdline for debugging - touchscreen_dmi quirks for two new laptop/tablet models * tag 'platform-drivers-x86-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: touchscreen_dmi: Add info for the EZpad 6s Pro platform/x86: touchscreen_dmi: Add info for GlobalSpace SolT IVW 11.6" tablet platform/x86: touchscreen_dmi: Add support for setting touchscreen properties from cmdline platform/x86: thinkpad_acpi: Select INPUT_SPARSEKMAP in Kconfig platform/x86: x86-android-tablets: Add "select LEDS_CLASS" platform/x86: ISST: fix use-after-free in tpmi_sst_dev_remove()
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - A fix to avoid pt_regs aliasing with idle thread stacks on secondary harts. - HAVE_ARCH_HUGE_VMAP is enabled on XIP kernels, which fixes boot issues on XIP systems with huge pages. - An update to the uABI documentation clarifying that only scalar misaligned accesses were grandfathered in as supported, as the vector extension did not exist at the time the uABI was frozen. - A fix for the recently-added byte/half atomics to avoid losing the fully ordered decorations. * tag 'riscv-for-linus-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix fully ordered LR/SC xchg[8|16]() implementations Documentation: RISC-V: uabi: Only scalar misaligned loads are supported riscv: enable HAVE_ARCH_HUGE_VMAP for XIP kernel riscv: prevent pt_regs corruption for secondary idle threads
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull bcachefs fixes from Kent Overstreet: "Assorted odds and ends... - two downgrade fixes - a couple snapshot deletion and repair fixes, thanks to noradtux for finding these and providing the image to debug them - a couple assert fixes - convert to folio helper, from Matthew - some improved error messages - bit of code reorganization (just moving things around); doing this while things are quiet so I'm not rebasing fixes past reorgs - don't return -EROFS on inconsistency error in recovery, this confuses util-linux and has it retry the mount - fix failure to return error on misaligned dio write; reported as an issue with coreutils shred" * tag 'bcachefs-2024-05-30' of https://evilpiepirate.org/git/bcachefs: (21 commits) bcachefs: Fix failure to return error on misaligned dio write bcachefs: Don't return -EROFS from mount on inconsistency error bcachefs: Fix uninitialized var warning bcachefs: Split out sb-errors_format.h bcachefs: Split out journal_seq_blacklist_format.h bcachefs: Split out replicas_format.h bcachefs: Split out disk_groups_format.h bcachefs: split out sb-downgrade_format.h bcachefs: split out sb-members_format.h bcachefs: Better fsck error message for key version bcachefs: btree_gc can now handle unknown btrees bcachefs: add missing MODULE_DESCRIPTION() bcachefs: Fix setting of downgrade recovery passes/errors bcachefs: Run check_key_has_snapshot in snapshot_delete_keys() bcachefs: Refactor delete_dead_snapshots() bcachefs: Fix locking assert bcachefs: Fix lookup_first_inode() when inode_generations are present bcachefs: Plumb bkey into __btree_err() bcachefs: Use copy_folio_from_iter_atomic() bcachefs: Fix sb-downgrade validation ... -
Takashi Iwai authored
At converting between the legacy event and UMP, the parameters for MIDI Song Position Pointer are incorrectly stored. It should have been LSB -> MSB order while it stored in MSB -> LSB order. This patch corrects the ordering. Fixes: e9e02819 ("ALSA: seq: Automatic conversion of UMP events") Link: https://lore.kernel.org/r/20240531075110.3250-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Waiman Long authored
Commit bf20ab53 ("blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW") attempts to revert the code change introduced by commit cd5ab1b0 ("blk-throttle: add .low interface"). However, it leaves behind the bps_conf[] and iops_conf[] fields in the throtl_grp structure which aren't set anywhere in the new blk-throttle.c code but are still being used by tg_prfill_limit() to display the limits in io.max. Now io.max always displays the following values if a block queue is used: <m>:<n> rbps=0 wbps=0 riops=0 wiops=0 Fix this problem by removing bps_conf[] and iops_conf[] and use bps[] and iops[] instead to complete the revert. Fixes: bf20ab53 ("blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW") Reported-by:
Justin Forbes <jforbes@redhat.com> Closes: https://github.com/containers/podman/issues/22701#issuecomment-2120627789Signed-off-by:
Waiman Long <longman@redhat.com> Acked-by:
Tejun Heo <tj@kernel.org> Reviewed-by:
Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240530134547.970075-1-longman@redhat.comSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 30 May, 2024 31 commits
-
-
Damien Le Moal authored
A zoned device may have a last sequential write required zone that is smaller than other zones. However, all tests to check if a zone write plug write offset exceeds the zone capacity use the same capacity value stored in the gendisk zone_capacity field. This is incorrect for a zoned device with a last runt (smaller) zone. Add the new field last_zone_capacity to struct gendisk to store the capacity of the last zone of the device. blk_revalidate_seq_zone() and blk_revalidate_conv_zone() are both modified to get this value when disk_zone_is_last() returns true. Similarly to zone_capacity, the value is first stored using the last_zone_capacity field of struct blk_revalidate_zone_args. Once zone revalidation of all zones is done, this is used to set the gendisk last_zone_capacity field. The checks to determine if a zone is full or if a sector offset in a zone exceeds the zone capacity in disk_should_remove_zone_wplug(), disk_zone_wplug_abort_unaligned(), blk_zone_write_plug_init_request(), and blk_zone_wplug_prepare_bio() are modified to use the new helper functions disk_zone_is_full() and disk_zone_wplug_is_full(). disk_zone_is_full() uses the zone index to determine if the zone being tested is the last one of the disk and uses the either the disk zone_capacity or last_zone_capacity accordingly. Fixes: dd291d77 ("block: Introduce zone write plugging") Signed-off-by:
Damien Le Moal <dlemoal@kernel.org> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20240530054035.491497-4-dlemoal@kernel.orgSigned-off-by:
-
Damien Le Moal authored
Commit ecfe43b1 ("block: Remember zone capacity when revalidating zones") introduced checks to ensure that the capacity of the zones of a zoned device is constant for all zones. However, this check ignores the possibility that a zoned device has a smaller last zone with a size not equal to the capacity of other zones. Such device correspond in practice to an SMR drive with a smaller last zone and all zones with a capacity equal to the zone size, leading to the last zone capacity being different than the capacity of other zones. Correctly handle such device by fixing the check for the constant zone capacity in blk_revalidate_seq_zone() using the new helper function disk_zone_is_last(). This helper function is also used in blk_revalidate_zone_cb() when checking the zone size. Fixes: ecfe43b1 ("block: Remember zone capacity when revalidating zones") Signed-off-by:
-
Damien Le Moal authored
A zoned device with a smaller last zone together with a zone capacity smaller than the zone size does make any sense as that does not correspond to any possible setup for a real device: 1) For ZNS and zoned UFS devices, all zones are always the same size. 2) For SMR HDDs, all zones always have the same capacity. In other words, if we have a smaller last runt zone, then this zone capacity should always be equal to the zone size. Add a check in null_init_zoned_dev() to prevent a configuration to have both a smaller zone size and a zone capacity smaller than the zone size. Signed-off-by:
-
Jens Axboe authored
syzbot reports that recv is using an uninitialized value: ===================================================== BUG: KMSAN: uninit-value in io_req_cqe_overflow io_uring/io_uring.c:810 [inline] BUG: KMSAN: uninit-value in io_req_complete_post io_uring/io_uring.c:937 [inline] BUG: KMSAN: uninit-value in io_issue_sqe+0x1f1b/0x22c0 io_uring/io_uring.c:1763 io_req_cqe_overflow io_uring/io_uring.c:810 [inline] io_req_complete_post io_uring/io_uring.c:937 [inline] io_issue_sqe+0x1f1b/0x22c0 io_uring/io_uring.c:1763 io_wq_submit_work+0xa17/0xeb0 io_uring/io_uring.c:1860 io_worker_handle_work+0xc04/0x2000 io_uring/io-wq.c:597 io_wq_worker+0x447/0x1410 io_uring/io-wq.c:651 ret_from_fork+0x6d/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Uninit was stored to memory at: io_req_set_res io_uring/io_uring.h:215 [inline] io_recv_finish+0xf10/0x1560 io_uring/net.c:861 io_recv+0x12ec/0x1ea0 io_uring/net.c:1175 io_issue_sqe+0x429/0x22c0 io_uring/io_uring.c:1751 io_wq_submit_work+0xa17/0xeb0 io_uring/io_uring.c:1860 io_worker_handle_work+0xc04/0x2000 io_uring/io-wq.c:597 io_wq_worker+0x447/0x1410 io_uring/io-wq.c:651 ret_from_fork+0x6d/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Uninit was created at: slab_post_alloc_hook mm/slub.c:3877 [inline] slab_alloc_node mm/slub.c:3918 [inline] __do_kmalloc_node mm/slub.c:4038 [inline] __kmalloc+0x6e4/0x1060 mm/slub.c:4052 kmalloc include/linux/slab.h:632 [inline] io_alloc_async_data+0xc0/0x220 io_uring/io_uring.c:1662 io_msg_alloc_async io_uring/net.c:166 [inline] io_recvmsg_prep_setup io_uring/net.c:725 [inline] io_recvmsg_prep+0xbe8/0x1a20 io_uring/net.c:806 io_init_req io_uring/io_uring.c:2135 [inline] io_submit_sqe io_uring/io_uring.c:2182 [inline] io_submit_sqes+0x1135/0x2f10 io_uring/io_uring.c:2335 __do_sys_io_uring_enter io_uring/io_uring.c:3246 [inline] __se_sys_io_uring_enter+0x40f/0x3c80 io_uring/io_uring.c:3183 __x64_sys_io_uring_enter+0x11f/0x1a0 io_uring/io_uring.c:3183 x64_sys_call+0x2c0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:427 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f which appears to be io_recv_finish() reading kmsg->msg.msg_inq to decide if it needs to set IORING_CQE_F_SOCK_NONEMPTY or not. If the recv is entered with buffer selection, but no buffer is available, then we jump error path which calls io_recv_finish() without having assigned kmsg->msg_inq. This might cause an errant setting of the NONEMPTY flag for a request get gets errored with -ENOBUFS. Reported-by: syzbot+b1647099e82b3b349fbf@syzkaller.appspotmail.com Fixes: 4a3223f7 ("io_uring/net: switch io_recv() to using io_async_msghdr") Signed-off-by:
-
Takashi Iwai authored
Merge tag 'asoc-fix-v6.10-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.10 Several serieses of fixes that have come in since the merge window, mostly for Intel systems. The biggest thing is some updates from Peter which fix support for a series of Intel laptops which have been found to use 16 bit rather than 32 bit DMIC configuration blobs in their firmware descriptions. We also have a bunch of fixes for module annotations, and some smaller single patch fixes.
-
Alexandre Ghiti authored
The fully ordered versions of xchg[8|16]() using LR/SC lack the necessary memory barriers to guarantee the order. Fix this by matching what is already implemented in the fully ordered versions of cmpxchg() using LR/SC. Suggested-by:
Andrea Parri <parri.andrea@gmail.com> Reported-by:
Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by:
Palmer Dabbelt <palmer@rivosinc.com>
-
Palmer Dabbelt authored
We're stuck supporting scalar misaligned loads in userspace because they were part of the ISA at the time we froze the uABI. That wasn't the case for vector misaligned accesses, so depending on them unconditionally is a userspace bug. All extant vector hardware traps on these misaligned accesses. Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240524185600.5919-1-palmer@rivosinc.comSigned-off-by:
-
Nam Cao authored
HAVE_ARCH_HUGE_VMAP also works on XIP kernel, so remove its dependency on !XIP_KERNEL. This also fixes a boot problem for XIP kernel introduced by the commit in "Fixes:". This commit used huge page mapping for vmemmap, but huge page vmap was not enabled for XIP kernel. Fixes: ff172d48 ("riscv: Use hugepage mappings for vmemmap") Signed-off-by:
Nam Cao <namcao@linutronix.de> Cc: <stable@vger.kernel.org> Reviewed-by:
-
Sergey Matyukevich authored
Top of the kernel thread stack should be reserved for pt_regs. However this is not the case for the idle threads of the secondary boot harts. Their stacks overlap with their pt_regs, so both may get corrupted. Similar issue has been fixed for the primary hart, see c7cdd96e ("riscv: prevent stack corruption by reserving task_pt_regs(p) early"). However that fix was not propagated to the secondary harts. The problem has been noticed in some CPU hotplug tests with V enabled. The function smp_callin stored several registers on stack, corrupting top of pt_regs structure including status field. As a result, kernel attempted to save or restore inexistent V context. Fixes: 9a2451f1 ("RISC-V: Avoid using per cpu array for ordered booting") Fixes: 2875fe05 ("RISC-V: Add cpu_ops and modify default booting method") Signed-off-by:
Sergey Matyukevich <sergey.matyukevich@syntacore.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf and netfilter. Current release - regressions: - gro: initialize network_offset in network layer - tcp: reduce accepted window in NEW_SYN_RECV state Current release - new code bugs: - eth: mlx5e: do not use ptp structure for tx ts stats when not initialized - eth: ice: check for unregistering correct number of devlink params Previous releases - regressions: - bpf: Allow delete from sockmap/sockhash only if update is allowed - sched: taprio: extend minimum interval restriction to entire cycle too - netfilter: ipset: add list flush to cancel_gc - ipv4: fix address dump when IPv4 is disabled on an interface - sock_map: avoid race between sock_map_close and sk_psock_put - eth: mlx5: use mlx5_ipsec_rx_status_destroy to correctly delete status rules Previous releases - always broken: - core: fix __dst_negative_advice() race - bpf: - fix multi-uprobe PID filtering logic - fix pkt_type override upon netkit pass verdict - netfilter: tproxy: bail out if IP has been disabled on the device - af_unix: annotate data-race around unix_sk(sk)->addr - eth: mlx5e: fix UDP GSO for encapsulated packets - eth: idpf: don't enable NAPI and interrupts prior to allocating Rx buffers - eth: i40e: fully suspend and resume IO operations in EEH case - eth: octeontx2-pf: free send queue buffers incase of leaf to inner - eth: ipvlan: dont Use skb->sk in ipvlan_process_v{4,6}_outbound" * tag 'net-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) netdev: add qstat for csum complete ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound net: ena: Fix redundant device NUMA node override ice: check for unregistering correct number of devlink params ice: fix 200G PHY types to link speed mapping i40e: Fully suspend and resume IO operations in EEH case i40e: factoring out i40e_suspend/i40e_resume e1000e: move force SMBUS near the end of enable_ulp function net: dsa: microchip: fix RGMII error in KSZ DSA driver ipv4: correctly iterate over the target netns in inet_dump_ifaddr() net: fix __dst_negative_advice() race nfc/nci: Add the inconsistency check between the input data length and count MAINTAINERS: dwmac: starfive: update Maintainer net/sched: taprio: extend minimum interval restriction to entire cycle too net/sched: taprio: make q->picos_per_byte available to fill_sched_entry() netfilter: nft_fib: allow from forward/input without iif selector netfilter: tproxy: bail out if IP has been disabled on the device netfilter: nft_payload: skbuff vlan metadata mangle support net: ti: icssg-prueth: Fix start counter for ft1 filter sock_map: avoid race between sock_map_close and sk_psock_put ... -
Breno Leitao authored
kmemleak shows that there is a memory leak in io_uring read operation, where a buffer is allocated at iovec import, but never de-allocated. The memory is allocated at io_async_rw->free_iovec, but, then io_async_rw is kfreed, taking the allocated memory with it. I saw this happening when the read operation fails with -11 (EAGAIN). This is the kmemleak splat. unreferenced object 0xffff8881da591c00 (size 256): ... backtrace (crc 7a15bdee): [<00000000256f2de4>] __kmalloc+0x2d6/0x410 [<000000007a9f5fc7>] iovec_from_user.part.0+0xc6/0x160 [<00000000cecdf83a>] __import_iovec+0x50/0x220 [<00000000d1d586a2>] __io_import_iovec+0x13d/0x220 [<0000000054ee9bd2>] io_prep_rw+0x186/0x340 [<00000000a9c0372d>] io_prep_rwv+0x31/0x120 [<000000001d1170b9>] io_prep_readv+0xe/0x30 [<0000000070b8eb67>] io_submit_sqes+0x1bd/0x780 [<00000000812496d4>] __do_sys_io_uring_enter+0x3ed/0x5b0 [<0000000081499602>] do_syscall_64+0x5d/0x170 [<00000000de1c5a4d>] entry_SYSCALL_64_after_hwframe+0x76/0x7e This occurs because the async data cleanup functions are not set for read/write operations. As a result, the potentially allocated iovec in the rw async data is not freed before the async data is released, leading to a memory leak. With this following patch, kmemleak does not show the leaked memory anymore, and all liburing tests pass. Fixes: a9165b83 ("io_uring/rw: always setup io_async_rw for read/write requests") Signed-off-by:Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240530142340.1248216-1-leitao@debian.orgSigned-off-by:
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: The existing logic to pick a DMIC blob is based on several historical assumptions that the NHLT in BIOS always contains 32-bits per sample type (first patch, [1]). The other issue with the existing logic is that it was designed to care only about the bit depth of the format and fails to find the existing and correct blob when rate/channels are different on the FE side compared to what we should be using on the DAI side (we have components in path which can change rate/channel count). These issues have not been observed in past but with new MTL based (Windows) laptops and new topologies to enhance the audio quality, we started to see weird issues around how our assumptions of vendors failed. Since some NHLT blob handling cleanup has been done for 6.10, this series will complete that work to cover even cases that we don't anticipate to see. [1] https://github.com/thesofproject/linux/issues/4973
-
Peter Ujfalusi authored
Currently we only check the bit depth value among to DAI formats, but other parameters might be constant, like number of channels and/or rate. In capture we use the fe params as a reference to find the format and blob which should be used, but in the path we can have components which can handle expanding/narrowing number of channels or do a resample. In these cases the topology is expected to have 'fixed' parameter for channels/rates/bit depth and the conversion to the fe format is going to be done within the path. In practice this patch fixes issues like: All DMIC formats are fixed four channels We have a component which converts the four channel to stereo FE is opened with 2 channel Even if we have the correct bit depth format and blob (for four channel) we will still be looking for stereo configurations, which will fail. Note: the adjustment of params have switched order with the checking of single bit depth (needed for the NHLT blob fallback support). This change is non function, just that if the sof_ipc4_narrow_params_to_format() would fail, there is no point of checking the single bit depth. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://msgid.link/r/20240530111918.21974-6-peter.ujfalusi@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
Remove the duplicated code paths to check for single bit depth and to update the params with storing the parameters needed by the function and have a single code section. No functional change but the code is easier to follow. Signed-off-by:
-
Peter Ujfalusi authored
Rename the sof_ipc4_copier_is_single_format() to sof_ipc4_copier_is_single_bitdepth() to clear the confusion of the use of 'format' when we are querying information on the bit depth. Format is used to describe a combination of parameters (rate, channels, sample format / bit depth). Rename the flags used to store the result at the same time. Signed-off-by:
-
Peter Ujfalusi authored
Print out the number of channels for the format explicitly instead of having the reader to understand how to interpret the ch_map and ch_cfg values. Signed-off-by:
-
Peter Ujfalusi authored
The ACPI NHLT table always had 32-bit DMIC blob even if 16-bit was also present and taken as a 'rule' which obviously got broken and there is at least one device on the market which ships with only 16-bit DMIC configuration blob. This corner case has never been supported and it is going to need topology updates for DMIC copier to support multiple formats. As for the kernel side: if the copier supports multiple formats and the preferred 32-bit DMIC blob is not found then we will try to get a 16-bit DMIC configuration and look for a 16-bit copier config. Fixes: f9209644 ("ASoC: SOF: ipc4-topology: Correct DAI copier config and NHLT blob request") Link: https://github.com/thesofproject/linux/issues/4973Signed-off-by:
-
Jakub Kicinski authored
Recent commit 0cfe71f4 ("netdev: add queue stats") added a lot of useful stats, but only those immediately needed by virtio. Presumably virtio does not support CHECKSUM_COMPLETE, so statistic for that form of checksumming wasn't included. Other drivers will definitely need it, in fact we expect it to be needed in net-next soon (mlx5). So let's add the definition of the counter for CHECKSUM_COMPLETE to uAPI in net already, so that the counters are in a more natural order (all subsequent counters have not been present in any released kernel, yet). Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Joe Damato <jdamato@fastly.com> Fixes: 0cfe71f4 ("netdev: add queue stats") Link: https://lore.kernel.org/r/20240529163547.3693194-1-kuba@kernel.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Takashi Iwai authored
We fixed the incorrect UMP type for system messages in the recent commit, but it missed one place in system_ev_to_ump_midi1(). Fix it now. Fixes: e9e02819 ("ALSA: seq: Automatic conversion of UMP events") Fixes: c2bb79613fed ("ALSA: seq: Fix incorrect UMP type for system messages") Link: https://lore.kernel.org/r/20240530101044.17524-1-tiwai@suse.deSigned-off-by:
-
Yue Haibing authored
Raw packet from PF_PACKET socket ontop of an IPv6-backed ipvlan device will hit WARN_ON_ONCE() in sk_mc_loop() through sch_direct_xmit() path. WARNING: CPU: 2 PID: 0 at net/core/sock.c:775 sk_mc_loop+0x2d/0x70 Modules linked in: sch_netem ipvlan rfkill cirrus drm_shmem_helper sg drm_kms_helper CPU: 2 PID: 0 Comm: swapper/2 Kdump: loaded Not tainted 6.9.0+ #279 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:sk_mc_loop+0x2d/0x70 Code: fa 0f 1f 44 00 00 65 0f b7 15 f7 96 a3 4f 31 c0 66 85 d2 75 26 48 85 ff 74 1c RSP: 0018:ffffa9584015cd78 EFLAGS: 00010212 RAX: 0000000000000011 RBX: ffff91e585793e00 RCX: 0000000002c6a001 RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffff91e589c0f000 RBP: ffff91e5855bd100 R08: 0000000000000000 R09: 3d00545216f43d00 R10: ffff91e584fdcc50 R11: 00000060dd8616f4 R12: ffff91e58132d000 R13: ffff91e584fdcc68 R14: ffff91e5869ce800 R15: ffff91e589c0f000 FS: 0000000000000000(0000) GS:ffff91e898100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f788f7c44c0 CR3: 0000000008e1a000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? __warn (kernel/panic.c:693) ? sk_mc_loop (net/core/sock.c:760) ? report_bug (lib/bug.c:201 lib/bug.c:219) ? handle_bug (arch/x86/kernel/traps.c:239) ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) ? sk_mc_loop (net/core/sock.c:760) ip6_finish_output2 (net/ipv6/ip6_output.c:83 (discriminator 1)) ? nf_hook_slow (net/netfilter/core.c:626) ip6_finish_output (net/ipv6/ip6_output.c:222) ? __pfx_ip6_finish_output (net/ipv6/ip6_output.c:215) ipvlan_xmit_mode_l3 (drivers/net/ipvlan/ipvlan_core.c:602) ipvlan ipvlan_start_xmit (drivers/net/ipvlan/ipvlan_main.c:226) ipvlan dev_hard_start_xmit (net/core/dev.c:3594) sch_direct_xmit (net/sched/sch_generic.c:343) __qdisc_run (net/sched/sch_generic.c:416) net_tx_action (net/core/dev.c:5286) handle_softirqs (kernel/softirq.c:555) __irq_exit_rcu (kernel/softirq.c:589) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1043) The warning triggers as this: packet_sendmsg packet_snd //skb->sk is packet sk __dev_queue_xmit __dev_xmit_skb //q->enqueue is not NULL __qdisc_run sch_direct_xmit dev_hard_start_xmit ipvlan_start_xmit ipvlan_xmit_mode_l3 //l3 mode ipvlan_process_outbound //vepa flag ipvlan_process_v6_outbound ip6_local_out __ip6_finish_output ip6_finish_output2 //multicast packet sk_mc_loop //sk->sk_family is AF_PACKET Call ip{6}_local_out() with NULL sk in ipvlan as other tunnels to fix this. Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Suggested-by:Eric Dumazet <edumazet@google.com> Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 syzbot reports that nf_reinject() could be called without rcu_read_lock() when flushing pending packets at nfnetlink queue removal, from Eric Dumazet. Patch #2 flushes ipset list:set when canceling garbage collection to reference to other lists to fix a race, from Jozsef Kadlecsik. Patch #3 restores q-in-q matching with nft_payload by reverting f6ae9f12 ("netfilter: nft_payload: add C-VLAN support"). Patch #4 fixes vlan mangling in skbuff when vlan offload is present in skbuff, without this patch nft_payload corrupts packets in this case. Patch #5 fixes possible nul-deref in tproxy no IP address is found in netdevice, reported by syzbot and patch from Florian Westphal. Patch #6 removes a superfluous restriction which prevents loose fib lookups from input and forward hooks, from Eric Garver. My assessment is that patches #1, #2 and #5 address possible kernel crash, anything else in this batch fixes broken features. netfilter pull request 24-05-29 * tag 'nf-24-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_fib: allow from forward/input without iif selector netfilter: tproxy: bail out if IP has been disabled on the device netfilter: nft_payload: skbuff vlan metadata mangle support netfilter: nft_payload: restore vlan q-in-q match support netfilter: ipset: Add list flush to cancel_gc netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu() ==================== Link: https://lore.kernel.org/r/20240528225519.1155786-1-pablo@netfilter.orgSigned-off-by: -
Shay Agroskin authored
The driver overrides the NUMA node id of the device regardless of whether it knows its correct value (often setting it to -1 even though the node id is advertised in 'struct device'). This can lead to suboptimal configurations. This patch fixes this behavior and makes the shared memory allocation functions use the NUMA node id advertised by the underlying device. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/r/20240528170912.1204417-1-shayagr@amazon.comSigned-off-by:
-
Jakub Kicinski authored
Jacob Keller says: ==================== Intel Wired LAN Driver Updates 2024-05-28 (e1000e, i40e, ice) [part] This series includes a variety of fixes that have been accumulating on the Intel Wired LAN dev-queue. Hui Wang provides a fix for suspend/resume on e1000e due to failure to correctly setup the SMBUS in enable_ulp(). Thinh Tran provides a fix for EEH I/O suspend/resume on i40e to ensure that I/O operations can continue after a resume. To avoid duplicate code, the common logic is factored out of i40e_suspend and i40e_resume. Paul Greenwalt provides a fix to correctly map the 200G PHY types to link speeds in the ice driver. Dave Ertman provides a fix correcting devlink parameter unregistration in the event that the driver loads in safe mode and some of the parameters were not registered. ==================== Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-0-dc8593d2bbc6@intel.comSigned-off-by:
-
Dave Ertman authored
On module load, the ice driver checks for the lack of a specific PF capability to determine if it should reduce the number of devlink params to register. One situation when this test returns true is when the driver loads in safe mode. The same check is not present on the unload path when devlink params are unregistered. This results in the driver triggering a WARN_ON in the kernel devlink code. The current check and code path uses a reduction in the number of elements reported in the list of params. This is fragile and not good for future maintaining. Change the parameters to be held in two lists, one always registered and one dependent on the check. Add a symmetrical check in the unload path so that the correct parameters are unregistered as well. Fixes: 109eb291 ("ice: Add tx_scheduling_layers devlink param") CC: Lukasz Czapnik <lukasz.czapnik@intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by:
-
Paul Greenwalt authored
Commit 24407a01 ("ice: Add 200G speed/phy type use") added support for 200G PHY speeds, but did not include the mapping of 200G PHY types to link speed. As a result the driver is returning UNKNOWN link speed when setting 200G ethtool advertised link modes. To fix this add 200G PHY types to link speed mapping to ice_get_link_speed_based_on_phy_type(). Fixes: 24407a01 ("ice: Add 200G speed/phy type use") Reviewed-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by:
Paul Greenwalt <paul.greenwalt@intel.com> Tested-by:
-
Thinh Tran authored
When EEH events occurs, the callback functions in the i40e, which are managed by the EEH driver, will completely suspend and resume all IO operations. - In the PCI error detected callback, replaced i40e_prep_for_reset() with i40e_io_suspend(). The change is to fully suspend all I/O operations - In the PCI error slot reset callback, replaced pci_enable_device_mem() with pci_enable_device(). This change enables both I/O and memory of the device. - In the PCI error resume callback, replaced i40e_handle_reset_warning() with i40e_io_resume(). This change allows the system to resume I/O operations Fixes: a5f3d2c1 ("powerpc/pseries/pci: Add MSI domains") Reviewed-by:
Robert Thomas <rob.thomas@ibm.com> Signed-off-by:
Thinh Tran <thinhtr@linux.ibm.com> Reviewed-by:
Simon Horman <horms@kernel.org> Tested-by:
-
Thinh Tran authored
Two new functions, i40e_io_suspend() and i40e_io_resume(), have been introduced. These functions were factored out from the existing i40e_suspend() and i40e_resume() respectively. This factoring was done due to concerns about the logic of the I40E_SUSPENSED state, which caused the device to be unable to recover. The functions are now used in the EEH handling for device suspend/resume callbacks. The function i40e_enable_mc_magic_wake() has been moved ahead of i40e_io_suspend() to ensure it is declared before being used. Tested-by:
-
Hui Wang authored
The commit 861e8086 ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") introduces a regression on PCH_MTP_I219_LM18 (PCIID: 0x8086550A). Without the referred commit, the ethernet works well after suspend and resume, but after applying the commit, the ethernet couldn't work anymore after the resume and the dmesg shows that the NIC link changes to 10Mbps (1000Mbps originally): [ 43.305084] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx Without the commit, the force SMBUS code will not be executed if "return 0" or "goto out" is executed in the enable_ulp(), and in my case, the "goto out" is executed since FWSM_FW_VALID is set. But after applying the commit, the force SMBUS code will be ran unconditionally. Here move the force SMBUS code back to enable_ulp() and put it immediately ahead of hw->phy.ops.release(hw), this could allow the longest settling time as possible for interface in this function and doesn't change the original code logic. The issue was found on a Lenovo laptop with the ethernet hw as below: 00:1f.6 Ethernet controller [0200]: Intel Corporation Device [8086:550a] (rev 20). And this patch is verified (cable plug and unplug, system suspend and resume) on Lenovo laptops with ethernet hw: [8086:550a], [8086:550b], [8086:15bb], [8086:15be], [8086:1a1f], [8086:1a1c] and [8086:0dc7]. Fixes: 861e8086 ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") Signed-off-by:
Hui Wang <hui.wang@canonical.com> Acked-by:
Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by:
Naama Meir <naamax.meir@linux.intel.com> Reviewed-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.10 - Removing unused fields (Kanchan) - Large folio offsets support (Kundan) - Multipath NUMA node initialiazation fix (Nilay) - Multipath IO stats accounting fixes (Keith) - Circular lockdep fix (Keith) - Target race condition fix (Sagi) - Target memory leak fix (Sagi)" * tag 'nvme-6.10-2024-05-29' of git://git.infradead.org/nvme: nvmet: fix a possible leak when destroy a ctrl during qp establishment nvme: use srcu for iterating namespace list nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset nvme: remove sgs and sws nvmet: fix ns enable/disable possible hang nvme-multipath: fix io accounting on failover nvme: fix multipath batched completion accounting nvme-multipath: find NUMA path only for online numa-node
-
Tristram Ha authored
The driver should return RMII interface when XMII is running in RMII mode. Fixes: 0ab7f6bf ("net: dsa: microchip: ksz9477: use common xmii function") Signed-off-by:
Tristram Ha <tristram.ha@microchip.com> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Acked-by:
Jerry Ray <jerry.ray@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/1716932066-3342-1-git-send-email-Tristram.Ha@microchip.comSigned-off-by:
-
Alexander Mikhalitsyn authored
A recent change to inet_dump_ifaddr had the function incorrectly iterate over net rather than tgt_net, resulting in the data coming for the incorrect network namespace. Fixes: cdb2f80f ("inet: use xa_array iterator to implement inet_dump_ifaddr()") Reported-by:
Stéphane Graber <stgraber@stgraber.org> Closes: https://github.com/lxc/incus/issues/892Bisected-by:
Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Tested-by:
Christian Brauner <brauner@kernel.org> Reviewed-by:
-
