When sending a SYN message, this kernel stack trace is observed:

...
[   13.396352] RIP: 0010:_copy_from_iter+0xb4/0x550
...
[   13.398494] Call Trace:
[   13.398630]  <TASK>
[   13.398630]  ? __alloc_skb+0xed/0x1a0
[   13.398630]  tipc_msg_build+0x12c/0x670 [tipc]
[   13.398630]  ? shmem_add_to_page_cache.isra.71+0x151/0x290
[   13.398630]  __tipc_sendmsg+0x2d1/0x710 [tipc]
[   13.398630]  ? tipc_connect+0x1d9/0x230 [tipc]
[   13.398630]  ? __local_bh_enable_ip+0x37/0x80
[   13.398630]  tipc_connect+0x1d9/0x230 [tipc]
[   13.398630]  ? __sys_connect+0x9f/0xd0
[   13.398630]  __sys_connect+0x9f/0xd0
[   13.398630]  ? preempt_count_add+0x4d/0xa0
[   13.398630]  ? fpregs_assert_state_consistent+0x22/0x50
[   13.398630]  __x64_sys_connect+0x16/0x20
[   13.398630]  do_syscall_64+0x42/0x90
[   13.398630]  entry_SYSCALL_64_after_hwframe+0x63/0xcd

It is because commit a41dad90 ("iov_iter: saner checks for attempt
to copy to/from iterator") has introduced sanity check for copying
from/to iov iterator. Lacking of copy direction from the iterator
viewpoint would lead to kernel stack trace like above.

This commit fixes this issue by initializing the iov iterator with
the correct copy direction when sending SYN or ACK without data.

Fixes: f25dcc76 ("tipc: tipc ->sendmsg() conversion")
Reported-by: syzbot+d43608d061e8847ec9f3@syzkaller.appspotmail.com
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20230214012606.5804-1-tung.q.nguyen@dektech.com.auSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix handling of the tsync interrupt to compare the pin number with
IGB_N_SDP instead of IGB_N_EXTTS/IGB_N_PEROUT and fix the indexing to
the perout array.

Fixes: cf99c1dd ("igb: move PEROUT and EXTTS isr logic to separate functions")
Reported-by: Matt Corallo <ntp-lists@mattcorallo.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230213185822.3960072-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-02-13 (ice)

This series contains updates to ice driver only.

Michal fixes check of scheduling node weight and priority to be done
against desired value, not current value.

Jesse adds setting of all multicast when adding promiscuous mode to
resolve traffic being lost due to filter settings.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: fix lost multicast packets in promisc mode
  ice: Fix check for weight and priority of a scheduling node
====================

Link: https://lore.kernel.org/r/20230213185259.3959224-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot found arm64 builds would crash in sock_recv_mark()
when CONFIG_HARDENED_USERCOPY=y

x86 and powerpc are not detecting the issue because
they define user_access_begin.
This will be handled in a different patch,
because a check_object_size() is missing.

Only data from skb->cb[] can be copied directly to/from user space,
as explained in commit 79a8a642 ("net: Whitelist
the skbuff_head_cache "cb" field")

syzbot report was:
usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_head_cache' (offset 168, size 4)!
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:102 !
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 4410 Comm: syz-executor533 Not tainted 6.2.0-rc7-syzkaller-17907-g2d3827b3f393 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usercopy_abort+0x90/0x94 mm/usercopy.c:90
lr : usercopy_abort+0x90/0x94 mm/usercopy.c:90
sp : ffff80000fb9b9a0
x29: ffff80000fb9b9b0 x28: ffff0000c6073400 x27: 0000000020001a00
x26: 0000000000000014 x25: ffff80000cf52000 x24: fffffc0000000000
x23: 05ffc00000000200 x22: fffffc000324bf80 x21: ffff0000c92fe1a8
x20: 0000000000000001 x19: 0000000000000004 x18: 0000000000000000
x17: 656a626f2042554c x16: ffff0000c6073dd0 x15: ffff80000dbd2118
x14: ffff0000c6073400 x13: 00000000ffffffff x12: ffff0000c6073400
x11: ff808000081bbb4c x10: 0000000000000000 x9 : 7b0572d7cc0ccf00
x8 : 7b0572d7cc0ccf00 x7 : ffff80000bf650d4 x6 : 0000000000000000
x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000
x2 : ffff0001fefbff08 x1 : 0000000100000000 x0 : 000000000000006c
Call trace:
usercopy_abort+0x90/0x94 mm/usercopy.c:90
__check_heap_object+0xa8/0x100 mm/slub.c:4761
check_heap_object mm/usercopy.c:196 [inline]
__check_object_size+0x208/0x6b8 mm/usercopy.c:251
check_object_size include/linux/thread_info.h:199 [inline]
__copy_to_user include/linux/uaccess.h:115 [inline]
put_cmsg+0x408/0x464 net/core/scm.c:238
sock_recv_mark net/socket.c:975 [inline]
__sock_recv_cmsgs+0x1fc/0x248 net/socket.c:984
sock_recv_cmsgs include/net/sock.h:2728 [inline]
packet_recvmsg+0x2d8/0x678 net/packet/af_packet.c:3482
____sys_recvmsg+0x110/0x3a0
___sys_recvmsg net/socket.c:2737 [inline]
__sys_recvmsg+0x194/0x210 net/socket.c:2767
__do_sys_recvmsg net/socket.c:2777 [inline]
__se_sys_recvmsg net/socket.c:2774 [inline]
__arm64_sys_recvmsg+0x2c/0x3c net/socket.c:2774
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x64/0x178 arch/arm64/kernel/syscall.c:52
el0_svc_common+0xbc/0x180 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x48/0x110 arch/arm64/kernel/syscall.c:193
el0_svc+0x58/0x14c arch/arm64/kernel/entry-common.c:637
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: 91388800 aa0903e1 f90003e8 94e6d752 (d4210000)

Fixes: 6fd1d51c ("net: SO_RCVMARK socket option for SO_MARK with recvmsg()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Erin MacNeil <lnx.erin@gmail.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230213160059.3829741-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When setting 'snps,force_thresh_dma_mode' DT property, the following
warning is always emitted, regardless the status of force_sf_dma_mode:

dwmac-starfive 10020000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.

Do not print the rather misleading message when DMA store and forward
mode is already disabled.

Fixes: e2a240c7 ("driver:net:stmmac: Disable DMA store and forward mode if platform data force_thresh_dma_mode is set.")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230210202126.877548-1-cristian.ciocaltea@collabora.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The tc action act_ctinfo was using shared stats, fix it to use percpu stats
since bstats_update() must be called with locks or with a percpu pointer argument.

tdc results:
1..12
ok 1 c826 - Add ctinfo action with default setting
ok 2 0286 - Add ctinfo action with dscp
ok 3 4938 - Add ctinfo action with valid cpmark and zone
ok 4 7593 - Add ctinfo action with drop control
ok 5 2961 - Replace ctinfo action zone and action control
ok 6 e567 - Delete ctinfo action with valid index
ok 7 6a91 - Delete ctinfo action with invalid index
ok 8 5232 - List ctinfo actions
ok 9 7702 - Flush ctinfo actions
ok 10 3201 - Add ctinfo action with duplicate index
ok 11 8295 - Add ctinfo action with invalid index
ok 12 3964 - Replace ctinfo action with invalid goto_chain control

Fixes: 24ec483c ("net: sched: Introduce act_ctinfo action")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20230210200824.444856-1-pctammela@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

So far changing the period by just setting new period values while
running did not work.

The order as indicated by the publicly available reference manual of the i.MX8MP [1]
indicates a sequence:

 * initiate the programming sequence
 * set the values for PPS period and start time
 * start the pulse train generation.

This is currently not used in dwmac5_flex_pps_config(), which instead does:

 * initiate the programming sequence and immediately start the pulse train generation
 * set the values for PPS period and start time

This caused the period values written not to take effect until the FlexPPS output was
disabled and re-enabled again.

This patch fix the order and allows the period to be set immediately.

[1] https://www.nxp.com/webapp/Download?colCode=IMX8MPRM

Fixes: 9a8a02c9 ("net: stmmac: Add Flexible PPS support")
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Link: https://lore.kernel.org/r/20230210143937.3427483-1-j.zink@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There was a problem reported to us where the addition of a VF with an IPv6
address ending with a particular sequence would cause the parent device on
the PF to no longer be able to respond to neighbor discovery packets.

In this case, we had an ovs-bridge device living on top of a VLAN, which
was on top of a PF, and it would not be able to talk anymore (the neighbor
entry would expire and couldn't be restored).

The root cause of the issue is that if the PF is asked to be in IFF_PROMISC
mode (promiscuous mode) and it had an ipv6 address that needed the
33:33:ff:00:00:04 multicast address to work, then when the VF was added
with the need for the same multicast address, the VF would steal all the
traffic destined for that address.

The ice driver didn't auto-subscribe a request of IFF_PROMISC to the
"multicast replication from other port's traffic" meaning that it won't get
for instance, packets with an exact destination in the VF, as above.

The VF's IPv6 address, which adds a "perfect filter" for 33:33:ff:00:00:04,
results in no packets for that multicast address making it to the PF (which
is in promisc but NOT "multicast replication").

The fix is to enable "multicast promiscuous" whenever the driver is asked
to enable IFF_PROMISC, and make sure to disable it when appropriate.

Fixes: e94d4478 ("ice: Implement filter sync, NDO operations and bump version")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Currently checks for weight and priority ranges don't check incoming value
from the devlink. Instead it checks node current weight or priority. This
makes those checks useless.

Change range checks in ice_set_object_tx_priority() and
ice_set_object_tx_weight() to check against incoming priority an weight.

Fixes: 42c2eb6b ("ice: Implement devlink-rate API")
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

In bnxt_reserve_rings(), there is logic to check that the number of TX
rings reserved is enough to cover all the mqprio TCs, but it fails to
account for the TX XDP rings.  So the check will always fail if there
are mqprio TCs and TX XDP rings.  As a result, the driver always fails
to initialize after the XDP program is attached and the device will be
brought down.  A subsequent ifconfig up will also fail because the
number of TX rings is set to an inconsistent number.  Fix the check to
properly account for TX XDP rings.  If the check fails, set the number
of TX rings back to a consistent number after calling netdev_reset_tc().

Fixes: 674f50a5 ("bnxt_en: Implement new method to reserve rings.")
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When converting net_device_stats to rtnl_link_stats64 sign extension
is triggered on ILP32 machines as 6c1c5097 changed the previous
"ulong -> u64" conversion to "long -> u64" by accessing the
net_device_stats fields through a (signed) atomic_long_t.

This causes for example the received bytes counter to jump to 16EiB after
having received 2^31 bytes. Casting the atomic value to "unsigned long"
beforehand converting it into u64 avoids this.

Fixes: 6c1c5097 ("net: add atomic_long_t to net_device_stats fields")
Signed-off-by: Felix Riemann <felix.riemann@sma.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot reported that act_len in kalmia_send_init_packet() is
uninitialized when passing it to the first usb_bulk_msg error path. Jiri
Pirko noted that it's pointless to pass it in the error path, and that
the value that would be printed in the second error path would be the
value of act_len from the first call to usb_bulk_msg.[1]

With this in mind, let's just not pass act_len to the usb_bulk_msg error
paths.

1: https://lore.kernel.org/lkml/Y9pY61y1nwTuzMOa@nanopsycho/

Fixes: d4026123 ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730")
Reported-and-tested-by: syzbot+cd80c5ef5121bfe85b55@syzkaller.appspotmail.com
Signed-off-by: Miko Larsson <mikoxyzzz@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

old_meter needs to be free after it is detached regardless of whether
the new meter is successfully attached.

Fixes: c7c4c44c ("net: openvswitch: expand the meters supported number")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since x->encap of pfkey_msg2xfrm_state() is not
initialized to 0, kernel heap data can be leaked.

Fix with kzalloc() to prevent this.
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kuniyuki Iwashima says:

====================
sk->sk_forward_alloc fixes.

The first patch fixes a negative sk_forward_alloc by adding
sk_rmem_schedule() before skb_set_owner_r(), and second patch
removes an unnecessary WARN_ON_ONCE().

v2: https://lore.kernel.org/netdev/20230209013329.87879-1-kuniyu@amazon.com/
v1: https://lore.kernel.org/netdev/20230207183718.54520-1-kuniyu@amazon.com/
====================

Link: https://lore.kernel.org/r/20230210002202.81442-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Christoph Paasch reported that commit b5fc2923 ("inet6: Remove
inet6_destroy_sock() in sk->sk_prot->destroy().") started triggering
WARN_ON_ONCE(sk->sk_forward_alloc) in sk_stream_kill_queues().  [0 - 2]
Also, we can reproduce it by a program in [3].

In the commit, we delay freeing ipv6_pinfo.pktoptions from sk->destroy()
to sk->sk_destruct(), so sk->sk_forward_alloc is no longer zero in
inet_csk_destroy_sock().

The same check has been in inet_sock_destruct() from at least v2.6,
we can just remove the WARN_ON_ONCE().  However, among the users of
sk_stream_kill_queues(), only CAIF is not calling inet_sock_destruct().
Thus, we add the same WARN_ON_ONCE() to caif_sock_destructor().

[0]: https://lore.kernel.org/netdev/39725AB4-88F1-41B3-B07F-949C5CAEFF4F@icloud.com/
[1]: https://github.com/multipath-tcp/mptcp_net-next/issues/341
[2]:
WARNING: CPU: 0 PID: 3232 at net/core/stream.c:212 sk_stream_kill_queues+0x2f9/0x3e0
Modules linked in:
CPU: 0 PID: 3232 Comm: syz-executor.0 Not tainted 6.2.0-rc5ab24eb4698afbe147b424149c529e2a43ec24eb5 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:sk_stream_kill_queues+0x2f9/0x3e0
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e ec 00 00 00 8b ab 08 01 00 00 e9 60 ff ff ff e8 d0 5f b6 fe 0f 0b eb 97 e8 c7 5f b6 fe <0f> 0b eb a0 e8 be 5f b6 fe 0f 0b e9 6a fe ff ff e8 02 07 e3 fe e9
RSP: 0018:ffff88810570fc68 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888101f38f40 RSI: ffffffff8285e529 RDI: 0000000000000005
RBP: 0000000000000ce0 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000ce0 R11: 0000000000000001 R12: ffff8881009e9488
R13: ffffffff84af2cc0 R14: 0000000000000000 R15: ffff8881009e9458
FS:  00007f7fdfbd5800(0000) GS:ffff88811b600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32923000 CR3: 00000001062fc006 CR4: 0000000000170ef0
Call Trace:
 <TASK>
 inet_csk_destroy_sock+0x1a1/0x320
 __tcp_close+0xab6/0xe90
 tcp_close+0x30/0xc0
 inet_release+0xe9/0x1f0
 inet6_release+0x4c/0x70
 __sock_release+0xd2/0x280
 sock_close+0x15/0x20
 __fput+0x252/0xa20
 task_work_run+0x169/0x250
 exit_to_user_mode_prepare+0x113/0x120
 syscall_exit_to_user_mode+0x1d/0x40
 do_syscall_64+0x48/0x90
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f7fdf7ae28d
Code: c1 20 00 00 75 10 b8 03 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ee fb ff ff 48 89 04 24 b8 03 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 37 fc ff ff 48 89 d0 48 83 c4 08 48 3d 01
RSP: 002b:00000000007dfbb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f7fdf7ae28d
RDX: 0000000000000000 RSI: ffffffffffffffff RDI: 0000000000000003
RBP: 0000000000000000 R08: 000000007f338e0f R09: 0000000000000e0f
R10: 000000007f338e13 R11: 0000000000000293 R12: 00007f7fdefff000
R13: 00007f7fdefffcd8 R14: 00007f7fdefffce0 R15: 00007f7fdefffcd8
 </TASK>

[3]: https://lore.kernel.org/netdev/20230208004245.83497-1-kuniyu@amazon.com/

Fixes: b5fc2923 ("inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Christoph Paasch <christophpaasch@icloud.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet pointed out [0] that when we call skb_set_owner_r()
for ipv6_pinfo.pktoptions, sk_rmem_schedule() has not been called,
resulting in a negative sk_forward_alloc.

We add a new helper which clones a skb and sets its owner only
when sk_rmem_schedule() succeeds.

Note that we move skb_set_owner_r() forward in (dccp|tcp)_v6_do_rcv()
because tcp_send_synack() can make sk_forward_alloc negative before
ipv6_opt_accepted() in the crossed SYN-ACK or self-connect() cases.

[0]: https://lore.kernel.org/netdev/CANn89iK9oc20Jdi_41jb9URdF210r7d1Y-+uypbMSbOfY6jqrg@mail.gmail.com/

Fixes: 323fbd0e ("net: dccp: Add handling of IPV6_PKTOPTIONS to dccp_v6_do_rcv()")
Fixes: 3df80d93 ("[DCCP]: Introduce DCCPv6")
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The result of nlmsg_find_attr() 'br_spec' is dereferenced in
nla_for_each_nested(), but it can take NULL value in nla_find() function,
which will result in an error.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 51616018 ("i40e: Add support for getlink, setlink ndo ops")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230209172833.3596034-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Incrementation of xsk_frames inside the for-loop produces
infinite loop, if we have both normal AF_XDP-TX and XDP_TXed
buffers to complete.

Split xsk_frames into 2 variables (xsk_frames and completed_frames)
to eliminate this bug.

Fixes: 29322791 ("ice: xsk: change batched Tx descriptor cleaning")
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230209160130.1779890-1-larysa.zaremba@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The imperfect hash area can be updated while packets are traversing,
which will cause a use-after-free when 'tcf_exts_exec()' is called
with the destroyed tcf_ext.

CPU 0:               CPU 1:
tcindex_set_parms    tcindex_classify
tcindex_lookup
                     tcindex_lookup
tcf_exts_change
                     tcf_exts_exec [UAF]

Stop operating on the shared area directly, by using a local copy,
and update the filter with 'rcu_replace_pointer()'. Delete the old
filter version only after a rcu grace period elapsed.

Fixes: 9b0d4446 ("net: sched: avoid atomic swap in tcf_exts_change")
Reported-by: valis <sec@valis.email>
Suggested-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230209143739.279867-1-pctammela@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use list_is_first() to check whether tsp->asoc matches the first
element of ep->asocs, as the list is not guaranteed to have an entry.

Fixes: 8f840e47 ("sctp: add the sctp_diag.c file")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230208-sctp-filter-v2-1-6e1f4017f326@diag.uniroma1.itSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In TI's AM62x/AM64x SoCs, successful teardown of RX DMA Channel raises an
interrupt. The process of servicing this interrupt involves flushing all
pending RX DMA descriptors and clearing the teardown completion marker
(TDCM). The am65_cpsw_nuss_rx_packets() function invoked from the RX
NAPI callback services the interrupt. Thus, it is necessary to wait for
this handler to run, drain all packets and clear TDCM, before calling
napi_disable() in am65_cpsw_nuss_common_stop() function post channel
teardown. If napi_disable() executes before ensuring that TDCM is
cleared, the TDCM remains set when the interfaces are down, resulting in
an interrupt storm when the interfaces are brought up again.

Since the interrupt raised to indicate the RX DMA Channel teardown is
specific to the AM62x and AM64x SoCs, add a quirk for it.

Fixes: 4f7cce27 ("net: ethernet: ti: am65-cpsw: add support for am64x cpsw3g")
Co-developed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230209084432.189222-1-s-vadapalli@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit b3973bb4 ("vmxnet3: set correct hash type based on
rss information") added hashType information into skb. However,
rssType field is populated for eop descriptor. This can lead
to incorrectly reporting of hashType for packets which use
multiple rx descriptors. Multiple rx descriptors are used
for Jumbo frame or LRO packets, which can hit this issue.

This patch moves the RSS codeblock under eop descritor.

Cc: stable@vger.kernel.org
Fixes: b3973bb4 ("vmxnet3: set correct hash type based on rss information")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Peng Li <lpeng@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Link: https://lore.kernel.org/r/20230208223900.5794-1-doshir@vmware.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot was able to trigger a warning [1] from net_free()
calling ref_tracker_dir_exit(&net->notrefcnt_tracker)
while the corresponding ref_tracker_dir_init() has not been
done yet.

copy_net_ns() can indeed bypass the call to setup_net()
in some error conditions.

Note:

We might factorize/move more code in preinit_net() in the future.

[1]
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 5817 Comm: syz-executor.3 Not tainted 6.2.0-rc7-next-20230208-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
assign_lock_key kernel/locking/lockdep.c:982 [inline]
register_lock_class+0xdb6/0x1120 kernel/locking/lockdep.c:1295
__lock_acquire+0x10a/0x5df0 kernel/locking/lockdep.c:4951
lock_acquire.part.0+0x11c/0x370 kernel/locking/lockdep.c:5691
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162
ref_tracker_dir_exit+0x52/0x600 lib/ref_tracker.c:24
net_free net/core/net_namespace.c:442 [inline]
net_free+0x98/0xd0 net/core/net_namespace.c:436
copy_net_ns+0x4f3/0x6b0 net/core/net_namespace.c:493
create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:228
ksys_unshare+0x449/0x920 kernel/fork.c:3205
__do_sys_unshare kernel/fork.c:3276 [inline]
__se_sys_unshare kernel/fork.c:3274 [inline]
__x64_sys_unshare+0x31/0x40 kernel/fork.c:3274
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80

Fixes: 0cafd77d ("net: add a refcount tracker for kernel sockets")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230208182123.3821604-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Guillaume Nault says:

====================
ipv6: Fix socket connection with DSCP fib-rules.

The "flowlabel" field of struct flowi6 is used to store both the actual
flow label and the DS Field (or Traffic Class). However the .connect
handlers of datagram and TCP sockets don't set the DS Field part when
doing their route lookup. This breaks fib-rules that match on DSCP.
====================

Link: https://lore.kernel.org/r/cover.1675875519.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add the fib_rule6_send and fib_rule4_send tests to verify that DSCP
values are properly taken into account when UDP or TCP sockets try to
connect().

Tests are done with nettest, which needs a new option to specify
the DS Field value of the socket being tested. This new option is
named '-Q', in reference to the similar option used by ping.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Take into account the IPV6_TCLASS socket option (DSCP) in
tcp_v6_connect(). Otherwise fib6_rule_match() can't properly
match the DSCP value, resulting in invalid route lookup.

For example:

  ip route add unreachable table main 2001:db8::10/124

  ip route add table 100 2001:db8::10/124 dev eth0
  ip -6 rule add dsfield 0x04 table 100

  echo test | socat - TCP6:[2001:db8::11]:54321,ipv6-tclass=0x04

Without this patch, socat fails at connect() time ("No route to host")
because the fib-rule doesn't jump to table 100 and the lookup ends up
being done in the main table.

Fixes: 2cc67cc7 ("[IPV6] ROUTE: Routing by Traffic Class.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Take into account the IPV6_TCLASS socket option (DSCP) in
ip6_datagram_flow_key_init(). Otherwise fib6_rule_match() can't
properly match the DSCP value, resulting in invalid route lookup.

For example:

  ip route add unreachable table main 2001:db8::10/124

  ip route add table 100 2001:db8::10/124 dev eth0
  ip -6 rule add dsfield 0x04 table 100

  echo test | socat - UDP6:[2001:db8::11]:54321,ipv6-tclass=0x04

Without this patch, socat fails at connect() time ("No route to host")
because the fib-rule doesn't jump to table 100 and the lookup ends up
being done in the main table.

Fixes: 2cc67cc7 ("[IPV6] ROUTE: Routing by Traffic Class.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Simon Horman says:

====================
nfp: fix schedule in atomic context when offloading sa

Yinjun Zhang says:

IPsec offloading callbacks may be called in atomic context, sleep is
not allowed in the implementation. Now use workqueue mechanism to
avoid this issue.

Extend existing workqueue mechanism for multicast configuration only
to universal use, so that all configuring through mailbox asynchoronously
can utilize it.

Also fix another two incorrect use of mailbox in IPsec:
 1. Need lock for race condition when accessing mbox
 2. Offset of mbox access should depends on tlv caps
====================

Link: https://lore.kernel.org/r/20230208102258.29639-1-simon.horman@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

IPsec offloading callbacks may be called in atomic context, sleep is
not allowed in the implementation. Now use workqueue mechanism to
avoid this issue.

Extend existing workqueue mechanism for multicast configuration only
to universal use, so that all configuring through mailbox asynchronously
can utilize it.

Fixes: 859a497f ("nfp: implement xfrm callbacks and expose ipsec offload feature to upper layer")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The mailbox configuration mechanism requires writing several registers,
which shouldn't be interrupted, so need lock to avoid race condition.

The base offset of mailbox configuration registers is not fixed, it
depends on TLV caps read from application firmware.

Fixes: 859a497f ("nfp: implement xfrm callbacks and expose ipsec offload feature to upper layer")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Code blocks handling BCMA_CHIP_ID_BCM5357 and BCMA_CHIP_ID_BCM53572 were
incorrectly unified. Chip package values are not unique and cannot be
checked independently. They are meaningful only in a context of a given
chip.

Packages BCM5358 and BCM47188 share the same value but then belong to
different chips. Code unification resulted in treating BCM5358 as
BCM47188 and broke its initialization.

Link: https://github.com/openwrt/openwrt/issues/8278
Fixes: cb1b0f90 ("net: ethernet: bgmac: unify code of the same family")
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230208091637.16291-1-zajec5@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from can and ipsec subtrees.

  Current release - regressions:

   - sched: fix off by one in htb_activate_prios()

   - eth: mana: fix accessing freed irq affinity_hint

   - eth: ice: fix out-of-bounds KASAN warning in virtchnl

  Current release - new code bugs:

   - eth: mtk_eth_soc: enable special tag when any MAC uses DSA

  Previous releases - always broken:

   - core: fix sk->sk_txrehash default

   - neigh: make sure used and confirmed times are valid

   - mptcp: be careful on subflow status propagation on errors

   - xfrm: prevent potential spectre v1 gadget in xfrm_xlate32_attr()

   - phylink: move phy_device_free() to correctly release phy device

   - eth: mlx5:
      - fix crash unsetting rx-vlan-filter in switchdev mode
      - fix hang on firmware reset
      - serialize module cleanup with reload and remove"

* tag 'net-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
  selftests: forwarding: lib: quote the sysctl values
  net: mscc: ocelot: fix all IPv6 getting trapped to CPU when PTP timestamping is used
  rds: rds_rm_zerocopy_callback() use list_first_entry()
  net: txgbe: Update support email address
  selftests: Fix failing VXLAN VNI filtering test
  selftests: mptcp: stop tests earlier
  selftests: mptcp: allow more slack for slow test-case
  mptcp: be careful on subflow status propagation on errors
  mptcp: fix locking for in-kernel listener creation
  mptcp: fix locking for setsockopt corner-case
  mptcp: do not wait for bare sockets' timeout
  net: ethernet: mtk_eth_soc: fix DSA TX tag hwaccel for switch port 0
  nfp: ethtool: fix the bug of setting unsupported port speed
  txhash: fix sk->sk_txrehash default
  net: ethernet: mtk_eth_soc: fix wrong parameters order in __xdp_rxq_info_reg()
  net: ethernet: mtk_eth_soc: enable special tag when any MAC uses DSA
  net: sched: sch: Fix off by one in htb_activate_prios()
  igc: Add ndo_tx_timeout support
  net: mana: Fix accessing freed irq affinity_hint
  hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMIC
  ...

Pull HID fixes from Benjamin Tissoires:

 - fix potential infinite loop with a badly crafted HID device (Xin
   Zhao)

 - fix regression from 6.1 in USB logitech devices potentially making
   their mouse wheel not working (Bastien Nocera)

 - clean up in AMD sensors, which fixes a long time resume bug (Mario
   Limonciello)

 - few device small fixes and quirks

* tag 'for-linus-2023020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Ignore battery for ELAN touchscreen 29DF on HP
  HID: amd_sfh: if no sensors are enabled, clean up
  HID: logitech: Disable hi-res scrolling on USB
  HID: core: Fix deadloop in hid_apply_multiplier.
  HID: Ignore battery for Elan touchscreen on Asus TP420IA
  HID: elecom: add support for TrackBall 056E:011C

Pull cifx fix from Steve French:
 "Small fix for use after free"

* tag '6.2-rc8-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix use-after-free in rdata->read_into_pages()

When set/restore sysctl value, we should quote the value as some keys
may have multi values, e.g. net.ipv4.ping_group_range

Fixes: f5ae5778 ("selftests: forwarding: lib: Add sysctl_set(), sysctl_restore()")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20230208032110.879205-1-liuhangbin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

While running this selftest which usually passes:

~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0
TEST: swp0: Unicast IPv4 to primary MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to macvlan MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, promisc            [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti           [ OK ]
TEST: swp0: Multicast IPv4 to joined group                          [ OK ]
TEST: swp0: Multicast IPv4 to unknown group                         [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, allmulti               [ OK ]
TEST: swp0: Multicast IPv6 to joined group                          [ OK ]
TEST: swp0: Multicast IPv6 to unknown group                         [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, allmulti               [ OK ]

if I start PTP timestamping then run it again (debug prints added by me),
the unknown IPv6 MC traffic is seen by the CPU port even when it should
have been dropped:

~/selftests/drivers/net/dsa# ptp4l -i swp0 -2 -P -m
ptp4l[225.410]: selected /dev/ptp1 as PTP clock
[  225.445746] mscc_felix 0000:00:00.5: ocelot_l2_ptp_trap_add: port 0 adding L2 PTP trap
[  225.453815] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_add: port 0 adding IPv4 PTP event trap
[  225.462703] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_add: port 0 adding IPv4 PTP general trap
[  225.471768] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_add: port 0 adding IPv6 PTP event trap
[  225.480651] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_add: port 0 adding IPv6 PTP general trap
ptp4l[225.488]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[225.488]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE
^C
~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0
TEST: swp0: Unicast IPv4 to primary MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to macvlan MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, promisc            [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti           [ OK ]
TEST: swp0: Multicast IPv4 to joined group                          [ OK ]
TEST: swp0: Multicast IPv4 to unknown group                         [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, allmulti               [ OK ]
TEST: swp0: Multicast IPv6 to joined group                          [ OK ]
TEST: swp0: Multicast IPv6 to unknown group                         [FAIL]
        reception succeeded, but should have failed
TEST: swp0: Multicast IPv6 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, allmulti               [ OK ]

The PGID_MCIPV6 is configured correctly to not flood to the CPU,
I checked that.

Furthermore, when I disable back PTP RX timestamping (ptp4l doesn't do
that when it exists), packets are RX filtered again as they should be:

~/selftests/drivers/net/dsa# hwstamp_ctl -i swp0 -r 0
[  218.202854] mscc_felix 0000:00:00.5: ocelot_l2_ptp_trap_del: port 0 removing L2 PTP trap
[  218.212656] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_del: port 0 removing IPv4 PTP event trap
[  218.222975] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_del: port 0 removing IPv4 PTP general trap
[  218.233133] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_del: port 0 removing IPv6 PTP event trap
[  218.242251] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_del: port 0 removing IPv6 PTP general trap
current settings:
tx_type 1
rx_filter 12
new settings:
tx_type 1
rx_filter 0
~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0
TEST: swp0: Unicast IPv4 to primary MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to macvlan MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, promisc            [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti           [ OK ]
TEST: swp0: Multicast IPv4 to joined group                          [ OK ]
TEST: swp0: Multicast IPv4 to unknown group                         [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, allmulti               [ OK ]
TEST: swp0: Multicast IPv6 to joined group                          [ OK ]
TEST: swp0: Multicast IPv6 to unknown group                         [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, allmulti               [ OK ]

So it's clear that something in the PTP RX trapping logic went wrong.

Looking a bit at the code, I can see that there are 4 typos, which
populate "ipv4" VCAP IS2 key filter fields for IPv6 keys.

VCAP IS2 keys of type OCELOT_VCAP_KEY_IPV4 and OCELOT_VCAP_KEY_IPV6 are
handled by is2_entry_set(). OCELOT_VCAP_KEY_IPV4 looks at
&filter->key.ipv4, and OCELOT_VCAP_KEY_IPV6 at &filter->key.ipv6.
Simply put, when we populate the wrong key field, &filter->key.ipv6
fields "proto.mask" and "proto.value" remain all zeroes (or "don't care").
So is2_entry_set() will enter the "else" of this "if" condition:

	if (msk == 0xff && (val == IPPROTO_TCP || val == IPPROTO_UDP))

and proceed to ignore the "proto" field. The resulting rule will match
on all IPv6 traffic, trapping it to the CPU.

This is the reason why the local_termination.sh selftest sees it,
because control traps are stronger than the PGID_MCIPV6 used for
flooding (from the forwarding data path).

But the problem is in fact much deeper. We trap all IPv6 traffic to the
CPU, but if we're bridged, we set skb->offload_fwd_mark = 1, so software
forwarding will not take place and IPv6 traffic will never reach its
destination.

The fix is simple - correct the typos.

I was intentionally inaccurate in the commit message about the breakage
occurring when any PTP timestamping is enabled. In fact it only happens
when L4 timestamping is requested (HWTSTAMP_FILTER_PTP_V2_EVENT or
HWTSTAMP_FILTER_PTP_V2_L4_EVENT). But ptp4l requests a larger RX
timestamping filter than it needs for "-2": HWTSTAMP_FILTER_PTP_V2_EVENT.
I wanted people skimming through git logs to not think that the bug
doesn't affect them because they only use ptp4l in L2 mode.

Fixes: 96ca08c0 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230207183117.1745754-1-vladimir.oltean@nxp.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

rds_rm_zerocopy_callback() uses list_entry() on the head of a list
causing a type confusion.
Use list_first_entry() to actually access the first element of the
rs_zcookie_queue list.

Fixes: 9426bbc6 ("rds: use list structure to track information for zerocopy completion notification")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230202-rds-zerocopy-v3-1-83b0df974f9a@diag.uniroma1.itSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Steffen Klassert says:

====================
ipsec 2023-02-08

1) Fix policy checks for nested IPsec tunnels when using
   xfrm interfaces. From Benedict Wong.

2) Fix netlink message expression on 32=>64-bit
   messages translators. From Anastasia Belova.

3) Prevent potential spectre v1 gadget in xfrm_xlate32_attr.
   From Eric Dumazet.

4) Always consistently use time64_t in xfrm_timer_handler.
   From Eric Dumazet.

5) Fix KCSAN reported bug: Multiple cpus can update use_time
   at the same time. From Eric Dumazet.

6) Fix SCP copy from IPv4 to IPv6 on interfamily tunnel.
   From Christian Hopps.

* tag 'ipsec-2023-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
  xfrm: fix bug with DSCP copy to v6 from v4 tunnel
  xfrm: annotate data-race around use_time
  xfrm: consistently use time64_t in xfrm_timer_handler()
  xfrm/compat: prevent potential spectre v1 gadget in xfrm_xlate32_attr()
  xfrm: compat: change expression for switch in xfrm_xlate64
  Fix XFRM-I support for nested ESP tunnels
====================

Link: https://lore.kernel.org/r/20230208114322.266510-1-steffen.klassert@secunet.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update new email address for Wangxun 10Gb NIC support team.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20230208023035.3371250-1-jiawenwu@trustnetic.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>