- 10 Nov, 2018 24 commits
-
-
Phil Auld authored
commit baa9be4f upstream. With a very low cpu.cfs_quota_us setting, such as the minimum of 1000, distribute_cfs_runtime may not empty the throttled_list before it runs out of runtime to distribute. In that case, due to the change from c06f04c7 to put throttled entries at the head of the list, later entries on the list will starve. Essentially, the same X processes will get pulled off the list, given CPU time and then, when expired, get put back on the head of the list where distribute_cfs_runtime will give runtime to the same set of processes leaving the rest. Fix the issue by setting a bit in struct cfs_bandwidth when distribute_cfs_runtime is running, so that the code in throttle_cfs_rq can decide to put the throttled entry on the tail or the head of the list. The bit is set/cleared by the callers of distribute_cfs_runtime while they hold cfs_bandwidth->lock. This is easy to reproduce with a handful of CPU consumers. I use 'crash' on the live system. In some cases you can simply look at the throttled list and see the later entries are not changing: crash> list cfs_rq.throttled_list -H 0xffff90b54f6ade40 -s cfs_rq.runtime_remaining | paste - - | awk '{print $1" "$4}' | pr -t -n3 1 ffff90b56cb2d200 -976050 2 ffff90b56cb2cc00 -484925 3 ffff90b56cb2bc00 -658814 4 ffff90b56cb2ba00 -275365 5 ffff90b166a45600 -135138 6 ffff90b56cb2da00 -282505 7 ffff90b56cb2e000 -148065 8 ffff90b56cb2fa00 -872591 9 ffff90b56cb2c000 -84687 10 ffff90b56cb2f000 -87237 11 ffff90b166a40a00 -164582 crash> list cfs_rq.throttled_list -H 0xffff90b54f6ade40 -s cfs_rq.runtime_remaining | paste - - | awk '{print $1" "$4}' | pr -t -n3 1 ffff90b56cb2d200 -994147 2 ffff90b56cb2cc00 -306051 3 ffff90b56cb2bc00 -961321 4 ffff90b56cb2ba00 -24490 5 ffff90b166a45600 -135138 6 ffff90b56cb2da00 -282505 7 ffff90b56cb2e000 -148065 8 ffff90b56cb2fa00 -872591 9 ffff90b56cb2c000 -84687 10 ffff90b56cb2f000 -87237 11 ffff90b166a40a00 -164582 Sometimes it is easier to see by finding a process getting starved and looking at the sched_info: crash> task ffff8eb765994500 sched_info PID: 7800 TASK: ffff8eb765994500 CPU: 16 COMMAND: "cputest" sched_info = { pcount = 8, run_delay = 697094208, last_arrival = 240260125039, last_queued = 240260327513 }, crash> task ffff8eb765994500 sched_info PID: 7800 TASK: ffff8eb765994500 CPU: 16 COMMAND: "cputest" sched_info = { pcount = 8, run_delay = 697094208, last_arrival = 240260125039, last_queued = 240260327513 }, Signed-off-by:
Phil Auld <pauld@redhat.com> Reviewed-by:
Ben Segall <bsegall@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: c06f04c7 ("sched: Fix potential near-infinite distribute_cfs_runtime() loop") Link: http://lkml.kernel.org/r/20181008143639.GA4019@pauld.bos.csbSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mikhail Nikiforov authored
commit 13c1c5e4 upstream. Add ELAN061C to the ACPI table to support Elan touchpad found in Lenovo IdeaPad 330-15IGM. Signed-off-by:
Mikhail Nikiforov <jackxviichaos@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Alan Stern authored
commit 665c365a upstream. Commit 7a68d9fb ("USB: usbdevfs: sanitize flags more") checks the transfer flags for URBs submitted from userspace via usbfs. However, the check for whether the USBDEVFS_URB_SHORT_NOT_OK flag should be allowed for a control transfer was added in the wrong place, before the code has properly determined the direction of the control transfer. (Control transfers are special because for them, the direction is set by the bRequestType byte of the Setup packet rather than direction bit of the endpoint address.) This patch moves code which sets up the allow_short flag for control transfers down after is_in has been set to the correct value. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+24a30223a4b609bb802e@syzkaller.appspotmail.com Fixes: 7a68d9fb ("USB: usbdevfs: sanitize flags more") CC: Oliver Neukum <oneukum@suse.com> CC: <stable@vger.kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 9ae24af3 upstream. num can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/usb/gadget/function/f_mass_storage.c:3177 fsg_lun_make() warn: potential spectre issue 'fsg_opts->common->luns' [r] (local cap) Fix this by sanitizing num before using it to index fsg_opts->common->luns Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Felipe Balbi <felipe.balbi@intel.com> Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
commit 81f7567c upstream. vhci_hub_control() accesses port_status array with out of bounds port value. Fix it to reference port_status[] only with a valid rhport value when invalid_rhport flag is true. The invalid_rhport flag is set early on after detecting in port value is within the bounds or not. The following is used reproduce the problem and verify the fix: C reproducer: https://syzkaller.appspot.com/x/repro.c?x=14ed8ab6400000 Reported-by: syzbot+bccc1fe10b70fadc78d0@syzkaller.appspotmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by:
-
Oliver Neukum authored
commit 9397940e upstream. If a device splits up a control message and a reset() happens between the parts, the message is lost and already recieved parts must be dropped. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Fixes: 1aba579f ("cdc-acm: handle read pipe errors") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Tobias Herzog authored
commit f976d0e5 upstream. The usb standard ("Universal Serial Bus Class Definitions for Communication Devices") distiguishes between "consistent signals" (DSR, DCD), and "irregular signals" (break, ring, parity error, framing error, overrun). The bits of "irregular signals" are set, if this error/event occurred on the device side and are immeadeatly unset, if the serial state notification was sent. Like other drivers of real serial ports do, just the occurence of those events should be counted in serial_icounter_struct (but no 1->0 transitions). Signed-off-by:
Tobias Herzog <t-herzog@gmx.de> Acked-by:
-
Tobias Herzog authored
commit dae3ddba upstream. Resetting the write index of the notification buffer on urb unlink (e.g. closing a cdc-acm device from userspace) may lead to wrong interpretation of further received notifications, in case the index is not 0 when urb unlink happens (i.e. when parts of a notification already have been transferred). On the device side there is no "reset" of the notification transimission and thus we would get out of sync with the device. Signed-off-by:
-
Gustavo A. R. Silva authored
commit 0295e395 upstream. hdr.cmd can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/infiniband/core/ucm.c:1127 ib_ucm_write() warn: potential spectre issue 'ucm_cmd_table' [r] (local cap) Fix this by sanitizing hdr.cmd before using it to index ucm_cmd_table. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit a3671a4f upstream. hdr.cmd can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/infiniband/core/ucma.c:1686 ucma_write() warn: potential spectre issue 'ucma_cmd_table' [r] (local cap) Fix this by sanitizing hdr.cmd before using it to index ucm_cmd_table. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
-
Eugeniy Paltsev authored
commit db05c481 upstream. drm fbdev emulation doesn't support changing the pixel format at all, so reject all pixel format changing requests. Cc: stable@vger.kernel.org Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181003164538.5534-1-Eugeniy.Paltsev@synopsys.comSigned-off-by:
-
Clint Taylor authored
commit 9068e02f upstream. HDMI Forum VSDB YCBCR420 deep color capability bits are 2:0. Correct definitions in the header for the mask to work correctly. Fixes: e6a9a2c3 ("drm/edid: parse ycbcr 420 deep color information") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107893 Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
-
Kai-Heng Feng authored
commit 0711a43b upstream. There's another panel that reports "DFP 1.x compliant TMDS" but it supports 6bpc instead of 8 bpc. Apply 6 bpc quirk for the panel to fix it. BugLink: https://bugs.launchpad.net/bugs/1794387 Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit efa61c8c upstream. pin_index can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/ptp/ptp_chardev.c:253 ptp_ioctl() warn: potential spectre issue 'ops->pin_config' [r] (local cap) Fix this by sanitizing pin_index before using it to index ops->pin_config, and before passing it as an argument to function ptp_set_pinfunc(), in which it is used to index info->pin_config. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Al Viro authored
commit 169b8033 upstream. the victim might've been rmdir'ed just before the lock_rename(); unlike the normal callers, we do not look the source up after the parents are locked - we know it beforehand and just recheck that it's still the child of what used to be its parent. Unfortunately, the check is too weak - we don't spot a dead directory since its ->d_parent is unchanged, dentry is positive, etc. So we sail all the way to ->rename(), with hosting filesystems _not_ expecting to be asked renaming an rmdir'ed subdirectory. The fix is easy, fortunately - the lock on parent is sufficient for making IS_DEADDIR() on child safe. Cc: stable@vger.kernel.org Fixes: 9ae326a6 (CacheFiles: A cache that backs onto a mounted filesystem) Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Brian Foster authored
[ Upstream commit a606ebdb ] The truncate transaction does not ever modify the inode btree, but includes an associated log reservation. Update xfs_calc_itruncate_reservation() to remove the reservation associated with inobt updates. [Amir: This commit was merged for kernel v4.16 and a twin commit was merged for xfsprogs v4.16. As a result, a small xfs filesystem formatted with features -m rmapbt=1,reflink=1 using mkfs.xfs version >= v4.16 cannot be mounted with kernel < v4.16. For example, xfstests generic/17{1,2,3} format a small fs and when trying to mount it, they fail with an assert on this very demonic line: XFS (vdc): Log size 3075 blocks too small, minimum size is 3717 blocks XFS (vdc): AAIEEE! Log failed size checks. Abort! XFS: Assertion failed: 0, file: src/linux/fs/xfs/xfs_log.c, line: 666 The simple solution for stable kernels is to apply this patch, because mkfs.xfs v4.16 is already in the wild, so we have to assume that xfs filesystems with a "too small" log exist. Regardless, xfsprogs maintainers should also consider reverting the twin patch to stop creating those filesystems for the sake of users with unpatched kernels.] Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Reviewed-by:
Sasha Levin <sashal@kernel.org>
-
Linus Walleij authored
[ Upstream commit 833eacc7 ] The MXS driver was calling back into the GPIO API from its irqchip. This is not very elegant, as we are a driver, let's just shortcut back into the gpio_chip .get() function instead. This is a tricky case since the .get() callback is not in this file, instead assigned by bgpio_init(). Calling the function direcly in the gpio_chip is however the lesser evil. Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Janusz Uzycki <j.uzycki@elproma.com.pl> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Amir Goldstein authored
[ Upstream commit 9bdda4e9 ] Commit 92183a42 ("fsnotify: fix ignore mask logic in send_to_group()") acknoledges the use case of ignoring an event on an inode mark, because of an ignore mask on a mount mark of the same group (i.e. I want to get all events on this file, except for the events that came from that mount). This change depends on correctly merging the inode marks and mount marks group lists, so that the mount mark ignore mask would be tested in send_to_group(). Alas, the merging of the lists did not take into account the case where event in question is not in the mask of any of the mount marks. To fix this, completely remove the tests for inode and mount event masks from the lists merging code. Fixes: 92183a42 ("fsnotify: fix ignore mask logic in send_to_group") Signed-off-by:
Jan Kara <jack@suse.cz> [amir: backport to v4.14.y] Signed-off-by:
-
Sasha Levin authored
This reverts commit b39ac542. The issue was fixed by upstream commit 5d797111 ("clk: tegra: Add quirk for getting CDEV1/2 clocks on Tegra20"). Signed-off-by:
-
Daniel Borkmann authored
commit 0962590e upstream. ALU operations on pointers such as scalar_reg += map_value_ptr are handled in adjust_ptr_min_max_vals(). Problem is however that map_ptr and range in the register state share a union, so transferring state through dst_reg->range = ptr_reg->range is just buggy as any new map_ptr in the dst_reg is then truncated (or null) for subsequent checks. Fix this by adding a raw member and use it for copying state over to dst_reg. Fixes: f1174f77 ("bpf/verifier: rework value tracking") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Edward Cree <ecree@solarflare.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Johan Hovold authored
commit 35aecc02 upstream Allow matching on interfaces having two endpoints by adding a new device-id flag. This allows for the handling of devices whose interface numbers can change (e.g. Quectel EP06) to be contained in the device-id table. The upstream commit removes a variable that is still in use in the 4.14 version of the option-driver, so the removal is undone. Tested-by:
Kristian Evensen <kristian.evensen@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Kristian Evensen authored
commit 36cae568 upstream The Quectel EP06 (and EM06/EG06) LTE modem supports updating the USB configuration, without the VID/PID or configuration number changing. When the configuration is updated and interfaces are added/removed, the interface numbers are updated. This causes our current code for matching EP06 not to work as intended, as the assumption about reserved interfaces no longer holds. If for example the diagnostic (first) interface is removed, option will (try to) bind to the QMI interface. This patch improves EP06 detection by replacing the current match with two matches, and those matches check class, subclass and protocol as well as VID and PID. The diag interface exports class, subclass and protocol as 0xff. For the other serial interfaces, class is 0xff and subclass and protocol are both 0x0. The modem can export the following devices and always in this order: diag, nmea, at, ppp. qmi and adb. This means that diag can only ever be interface 0, and interface numbers 1-5 should be marked as reserved. The three other serial devices can have interface numbers 0-3, but I have not marked any interfaces as reserved. The reason is that the serial devices are the only interfaces exported by the device where subclass and protocol is 0x0. QMI exports the same class, subclass and protocol values as the diag interface. However, the two interfaces have different number of endpoints, QMI has three and diag two. I have added a check for number of interfaces if VID/PID matches the EP06, and we ignore the device if number of interfaces equals three (and subclass is set). The upstream commit does not apply cleanly to the 4.14-tree because of differences in option_probe(). In order to make the commit apply, a slight reshuffeling of the code was needed. Signed-off-by:
Dan Williams <dcbw@redhat.com> [ johan: drop uneeded RSVD(5) for ADB ] Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Amir Goldstein authored
commit a725356b upstream. Commit 031a072a ("vfs: call vfs_clone_file_range() under freeze protection") created a wrapper do_clone_file_range() around vfs_clone_file_range() moving the freeze protection to former, so overlayfs could call the latter. The more common vfs practice is to call do_xxx helpers from vfs_xxx helpers, where freeze protecction is taken in the vfs_xxx helper, so this anomality could be a source of confusion. It seems that commit 8ede2055 ("ovl: add reflink/copyfile/dedup support") may have fallen a victim to this confusion - ovl_clone_file_range() calls the vfs_clone_file_range() helper in the hope of getting freeze protection on upper fs, but in fact results in overlayfs allowing to bypass upper fs freeze protection. Swap the names of the two helpers to conform to common vfs practice and call the correct helpers from overlayfs and nfsd. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: 031a072a ("vfs: call vfs_clone_file_range() under freeze...") Signed-off-by:
-
Alan Chiang authored
[ Upstream commit a2b3bf48 ] Provide a flexible way to determine the addressing bits of eeprom. Pass the addressing bits to driver through address-width property. Signed-off-by:
Alan Chiang <alanx.chiang@intel.com> Signed-off-by:
Andy Yeh <andy.yeh@intel.com> Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
-
- 04 Nov, 2018 16 commits
-
-
Greg Kroah-Hartman authored
-
Saeed Mahameed authored
[ Upstream commit e3ca3488 ] Avoid using the kernel's irq_descriptor and return IRQ vector affinity directly from the driver. This fixes the following build break when CONFIG_SMP=n include/linux/mlx5/driver.h: In function ‘mlx5_get_vector_affinity_hint’: include/linux/mlx5/driver.h:1299:13: error: ‘struct irq_desc’ has no member named ‘affinity_hint’ Fixes: 6082d9c9 ("net/mlx5: Fix mlx5_get_vector_affinity function") Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> CC: Randy Dunlap <rdunlap@infradead.org> CC: Guenter Roeck <linux@roeck-us.net> CC: Thomas Gleixner <tglx@linutronix.de> Tested-by:
Israel Rukshin <israelr@mellanox.com> Reported-by:
kbuild test robot <lkp@intel.com> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Davide Caratti authored
[ Upstream commit e331473f ] Similarly to what has been done in 8b4c3cdd ("net: sched: Add policy validation for tc attributes"), fix classifier code to add validation of TCA_CHAIN and TCA_KIND netlink attributes. tested with: # ./tdc.py -c filter v2: Let sch_api and cls_api share nla_policy they have in common, thanks to David Ahern. v3: Avoid EXPORT_SYMBOL(), as validation of those attributes is not done by TC modules, thanks to Cong Wang. While at it, restore the 'Delete / get qdisc' comment to its orginal position, just above tc_get_qdisc() function prototype. Fixes: 5bc17018 ("net: sched: introduce multichain support for filters") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 64bd9c81 ] On GENETv5, there is a hardware issue which prevents the GENET hardware from generating a link UP interrupt when the link is operating at 10Mbits/sec. Since we do not have any way to configure the link detection logic, fallback to polling in that case. Fixes: 42138085 ("net: bcmgenet: add support for the GENETv5 hardware") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit eddf016b ] If the skb space ends in an unresolved entry while dumping we'll miss some unresolved entries. The reason is due to zeroing the entry counter between dumping resolved and unresolved mfc entries. We should just keep counting until the whole table is dumped and zero when we move to the next as we have a separate table counter. Reported-by:
Colin Ian King <colin.king@canonical.com> Fixes: 8fb472c0 ("ipmr: improve hash scalability") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit da715775 ] When an FDB entry is configured, the address is validated to have the length of an Ethernet address, but the device for which the address is configured can be of any type. The above can result in the use of uninitialized memory when the address is later compared against existing addresses since 'dev->addr_len' is used and it may be greater than ETH_ALEN, as with ip6tnl devices. Fix this by making sure that FDB entries are only configured for Ethernet devices. BUG: KMSAN: uninit-value in memcmp+0x11d/0x180 lib/string.c:863 CPU: 1 PID: 4318 Comm: syz-executor998 Not tainted 4.19.0-rc3+ #49 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x14b/0x190 lib/dump_stack.c:113 kmsan_report+0x183/0x2b0 mm/kmsan/kmsan.c:956 __msan_warning+0x70/0xc0 mm/kmsan/kmsan_instr.c:645 memcmp+0x11d/0x180 lib/string.c:863 dev_uc_add_excl+0x165/0x7b0 net/core/dev_addr_lists.c:464 ndo_dflt_fdb_add net/core/rtnetlink.c:3463 [inline] rtnl_fdb_add+0x1081/0x1270 net/core/rtnetlink.c:3558 rtnetlink_rcv_msg+0xa0b/0x1530 net/core/rtnetlink.c:4715 netlink_rcv_skb+0x36e/0x5f0 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4733 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x1638/0x1720 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x1205/0x1290 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114 __sys_sendmsg net/socket.c:2152 [inline] __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159 do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x440ee9 Code: e8 cc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff6a93b518 EFLAGS: 00000213 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440ee9 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000003 RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000213 R12: 000000000000b4b0 R13: 0000000000401ec0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:256 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:181 kmsan_kmalloc+0x98/0x100 mm/kmsan/kmsan_hooks.c:91 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:100 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2718 [inline] __kmalloc_node_track_caller+0x9e7/0x1160 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2f5/0x9e0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:996 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline] netlink_sendmsg+0xb49/0x1290 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114 __sys_sendmsg net/socket.c:2152 [inline] __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159 do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 v2: * Make error message more specific (David) Fixes: 090096bf ("net: generic fdb support for drivers without ndo_fdb_<op>") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-and-tested-by: syzbot+3a288d5f5530b901310e@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+d53ab4e92a1db04110ff@syzkaller.appspotmail.com Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d48051c5 ] As shown by Dmitris, we need to use csum_block_add() instead of csum_add() when adding the FCS contribution to skb csum. Before 4.18 (more exactly commit 88078d98 "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), the whole skb csum was thrown away, so RXFCS changes were ignored. Then before commit d55bef50 ("net: fix pskb_trim_rcsum_slow() with odd trim offset") both mlx5 and pskb_trim_rcsum_slow() bugs were canceling each other. Now we fixed pskb_trim_rcsum_slow() we need to fix mlx5. Note that this patch also rewrites mlx5e_get_fcs() to : - Use skb_header_pointer() instead of reinventing it. - Use __get_unaligned_cpu32() to avoid possible non aligned accesses as Dmitris pointed out. Fixes: 902a5459 ("net/mlx5e: When RXFCS is set, add FCS data into checksum calculation") Reported-by:
Paweł Staszewski <pstaszewski@itcare.pl> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Eran Ben Elisha <eranbe@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Dimitris Michailidis <dmichail@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Paweł Staszewski <pstaszewski@itcare.pl> Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Tested-By:
Maria Pasechnik <mariap@mellanox.com> Signed-off-by:
-
Dimitris Michailidis authored
[ Upstream commit d55bef50 ] We've been getting checksum errors involving small UDP packets, usually 59B packets with 1 extra non-zero padding byte. netdev_rx_csum_fault() has been complaining that HW is providing bad checksums. Turns out the problem is in pskb_trim_rcsum_slow(), introduced in commit 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"). The source of the problem is that when the bytes we are trimming start at an odd address, as in the case of the 1 padding byte above, skb_checksum() returns a byte-swapped value. We cannot just combine this with skb->csum using csum_sub(). We need to use csum_block_sub() here that takes into account the parity of the start address and handles the swapping. Matches existing code in __skb_postpull_rcsum() and esp_remove_trailer(). Fixes: 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends") Signed-off-by:
Dimitris Michailidis <dmichail@google.com> Reviewed-by:
-
Cong Wang authored
[ Upstream commit 7de414a9 ] Most callers of pskb_trim_rcsum() simply drop the skb when it fails, however, ip_check_defrag() still continues to pass the skb up to stack. This is suspicious. In ip_check_defrag(), after we learn the skb is an IP fragment, passing the skb to callers makes no sense, because callers expect fragments are defrag'ed on success. So, dropping the skb when we can't defrag it is reasonable. Note, prior to commit 88078d98, this is not a big problem as checksum will be fixed up anyway. After it, the checksum is not correct on failure. Found this during code review. Fixes: 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
-
Phil Sutter authored
[ Upstream commit 3c53ed8f ] When dumping classes by parent, kernel would return classes twice: | # tc qdisc add dev lo root prio | # tc class show dev lo | class prio 8001:1 parent 8001: | class prio 8001:2 parent 8001: | class prio 8001:3 parent 8001: | # tc class show dev lo parent 8001: | class prio 8001:1 parent 8001: | class prio 8001:2 parent 8001: | class prio 8001:3 parent 8001: | class prio 8001:1 parent 8001: | class prio 8001:2 parent 8001: | class prio 8001:3 parent 8001: This comes from qdisc_match_from_root() potentially returning the root qdisc itself if its handle matched. Though in that case, root's classes were already dumped a few lines above. Fixes: cb395b20 ("net: sched: optimize class dumps") Signed-off-by:
Phil Sutter <phil@nwl.cc> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
-
Huy Nguyen authored
[ Upstream commit a48bc513 ] The HW spec defines only bits 24-26 of pftype_wq as the page fault type, use the required mask to ensure that. Fixes: d9aaed83 ("{net,IB}/mlx5: Refactor page fault handling") Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Jaime Caamaño Ruiz authored
[ Upstream commit 46ebe283 ] When there are both pop and push ethernet header actions among the actions to be applied to a packet, an unexpected EINVAL (Invalid argument) error is obtained. This is due to mac_proto not being reset correctly when those actions are validated. Reported-at: https://mail.openvswitch.org/pipermail/ovs-discuss/2018-October/047554.html Fixes: 91820da6 ("openvswitch: add Ethernet push and pop actions") Signed-off-by:
Jaime Caamaño Ruiz <jcaamano@suse.com> Tested-by:
Greg Rose <gvrose8192@gmail.com> Reviewed-by:
-
Stefano Brivio authored
[ Upstream commit d4d576f5 ] Commit 058214a4 ("ip6_tun: Add infrastructure for doing encapsulation") added the ip6_tnl_encap() call in ip6_tnl_xmit(), before the call to ipv6_push_frag_opts() to append the IPv6 Tunnel Encapsulation Limit option (option 4, RFC 2473, par. 5.1) to the outer IPv6 header. As long as the option didn't actually end up in generated packets, this wasn't an issue. Then commit 89a23c8b ("ip6_tunnel: Fix missing tunnel encapsulation limit option") fixed sending of this option, and the resulting layout, e.g. for FoU, is: .-------------------.------------.----------.-------------------.----- - - | Outer IPv6 Header | UDP header | Option 4 | Inner IPv6 Header | Payload '-------------------'------------'----------'-------------------'----- - - Needless to say, FoU and GUE (at least) won't work over IPv6. The option is appended by default, and I couldn't find a way to disable it with the current iproute2. Turn this into a more reasonable: .-------------------.----------.------------.-------------------.----- - - | Outer IPv6 Header | Option 4 | UDP header | Inner IPv6 Header | Payload '-------------------'----------'------------'-------------------'----- - - With this, and with 84dad559 ("udp6: fix encap return code for resubmitting"), FoU and GUE work again over IPv6. Fixes: 058214a4 ("ip6_tun: Add infrastructure for doing encapsulation") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Tobias Jungel authored
[ Upstream commit 414dd6fb ] The attribute IFLA_BOND_AD_ACTOR_SYSTEM is sent to user space having the length of sizeof(bond->params.ad_actor_system) which is 8 byte. This patch aligns the length to ETH_ALEN to have the same MAC address exposed as using sysfs. Fixes: f87fda00 ("bonding: prevent out of bound accesses") Signed-off-by:
Tobias Jungel <tobias.jungel@gmail.com> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 58f5bbe3 ] In dev_ethtool(), the eth command 'ethcmd' is firstly copied from the use-space buffer 'useraddr' and checked to see whether it is ETHTOOL_PERQUEUE. If yes, the sub-command 'sub_cmd' is further copied from the user space. Otherwise, 'sub_cmd' is the same as 'ethcmd'. Next, according to 'sub_cmd', a permission check is enforced through the function ns_capable(). For example, the permission check is required if 'sub_cmd' is ETHTOOL_SCOALESCE, but it is not necessary if 'sub_cmd' is ETHTOOL_GCOALESCE, as suggested in the comment "Allow some commands to be done by anyone". The following execution invokes different handlers according to 'ethcmd'. Specifically, if 'ethcmd' is ETHTOOL_PERQUEUE, ethtool_set_per_queue() is called. In ethtool_set_per_queue(), the kernel object 'per_queue_opt' is copied again from the user-space buffer 'useraddr' and 'per_queue_opt.sub_command' is used to determine which operation should be performed. Given that the buffer 'useraddr' is in the user space, a malicious user can race to change the sub-command between the two copies. In particular, the attacker can supply ETHTOOL_PERQUEUE and ETHTOOL_GCOALESCE to bypass the permission check in dev_ethtool(). Then before ethtool_set_per_queue() is called, the attacker changes ETHTOOL_GCOALESCE to ETHTOOL_SCOALESCE. In this way, the attacker can bypass the permission check and execute ETHTOOL_SCOALESCE. This patch enforces a check in ethtool_set_per_queue() after the second copy from 'useraddr'. If the sub-command is different from the one obtained in the first copy in dev_ethtool(), an error code EINVAL will be returned. Fixes: f38d138a ("net/ethtool: support set coalesce per queue") Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Ake Koomsin authored
[ Upstream commit 05c998b7 ] Commit 713a98d9 ("virtio-net: serialize tx routine during reset") introduces netif_tx_disable() after netif_device_detach() in order to avoid use-after-free of tx queues. However, there are two issues. 1) Its operation is redundant with netif_device_detach() in case the interface is running. 2) In case of the interface is not running before suspending and resuming, the tx does not get resumed by netif_device_attach(). This results in losing network connectivity. It is better to use netif_tx_lock_bh()/netif_tx_unlock_bh() instead for serializing tx routine during reset. This also preserves the symmetry of netif_device_detach() and netif_device_attach(). Fixes commit 713a98d9 ("virtio-net: serialize tx routine during reset") Signed-off-by:
Ake Koomsin <ake@igel.co.jp> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
