- 24 Apr, 2008 40 commits
-
-
Mike Isely authored
In the end we'd like the dvb interface to always be present - even for analog devices (via the mpeg encoder). However right now pvrusb2-dvb won't operate correctly if the hardware doesn't have a digital tuner, so don't initialize the DVB interface unless we know we have a digital tuner. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mike Isely authored
Other pvrusb2-dvb changes have made the digital_up flag obsolete. So kill it. Signed-off-by:
-
Mike Isely authored
Rather than making an explicit call to tear down the pvrusb2-dvb module, use the callback in the pvr2_channel structure. This has the advantage that now tear-down only happens when it makes sense. The previous implementation had scenarios where it was possible for the tear-down call to happen without a prior initialization. Signed-off-by:
-
Mike Isely authored
Eliminate the need for a separate pvr2_dvb_fh; since in the DVB context there can only ever be a single instance then there is no need for a separate instance to handle streaming state. This simplifies the module. Also move streaming start/stop out of the feed thread and into the driver's main context - which makes it possible for streaming start up failures to be detected by the DVB core. Signed-off-by:
-
Mike Isely authored
The pvrusb2-dvb feed thread cannot be allowed to exit by itself without first waiting for kthread_should_stop() to return true. Otherwise the driver will have a dangling task_struct context, which will cause a very nasty kernel oops. Signed-off-by:
-
Mike Isely authored
Fix pvrusb2 kbuild typo introduced when pvrusb2-dvb was added. Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
start work on streaming / buffer handling code to feed the software demux Signed-off-by:
-
Michael Krufky authored
This function is just a skeleton for now - a placeholder to remind us to fix it. Signed-off-by:
-
Michael Krufky authored
Add basic framework for the DVB API. This is enough to control the tuner & demod of the digital frontend, but the stream & buffer handling is still missing. Additional note from Mike Isely <isely@pobox.com> - also, since these changes are still very experimental arrange for DVB changes to be compiled in via new CONFIG_VIDEO_PVRUSB2_DVB option, for now. Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Dmitry Belimov authored
Beholder TV/FM tuners: Changes: Add support Beholder Columbus PCMCIA card. Add key map for remote control of Beholder Columbus PCMCIA card. Fix gpiomask for all Beholder tuners. Signed-off-by:Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
-
Dmitry Belimov authored
There are two conditions, reported by saa7134 that indicates that the I2C bus is busy: TO_SCL and TO_ARB. On both states, it needs to wait for I2C release, before using the bus. Signed-off-by:
-
Dmitry Belimov authored
Signed-off-by:
-
Steven Toth authored
Trying to improve the SNR reporting. Signed-off-by:
Steven Toth <stoth@hauppauge.com> Signed-off-by:
-
Steven Toth authored
DVB-T mode is now supported using the DiBcom dib7000p demodulator and the Xceive xc3028L silicon tuner. Analog mode is not supported. Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Steven Toth authored
This allows future drivers to select the most appropriate output mode. Signed-off-by:
-
Guennadi Liakhovetski authored
Currently the pxa-camera driver has a bug, visible when the user requests more than 2 video buffers. When the third buffer is queued, it is not appended to the DMA-descriptor list of the second buffer, but is again appended to the first buffer. Fix it. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
FIFO overruns are not seldom on PXA camera interface FIFOs. Handle them by dropping the corrupted frame, waiting for the next start-of-frame, and restarting capture. Signed-off-by:
-
Mike Rapoport authored
This patch adds support for YUV packed and planar capture for pxa_camera. Signed-off-by:
Mike Rapoport <mike@compulab.co.il> Signed-off-by:
-
Guennadi Liakhovetski authored
This obviously redundant return has been in the driver from the very first version. Remove it. Signed-off-by:
-
Douglas Schilling Landgraf authored
Convert meye to use video_ioctl2 Signed-off-by:
Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by:
-
Douglas Schilling Landgraf authored
Added default vidioc handler for other private ioctls Signed-off-by:
-
Oliver Endriss authored
Add support for Activy budget card with BSBE1 tuner, subsystem id 0x1131:0x4f60. Low band and DiSEqC support should work now (BSBE1 and BSRU6 tuner). Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Oliver Endriss authored
Fixed some typos. Signed-off-by:
-
Oliver Endriss authored
Add flag to turn off OP0 output. Signed-off-by:
-
Oliver Endriss authored
Reworked the BSBE1 tuner support in bsbe1.h to follow the ALPS-recommended parameters more closely. Tested with BSBE1-based Activy cards and TT DVB-S rev 2.3. Signed-off-by:
-
Andrea Odetti authored
Implementation of DMX_SET_BUFFER_SIZE for dvr. Synchronization of the code of DMX_SET_BUFFER_SIZE for demux and dvr. Signed-off-by:
Andrea Odetti <mariofutire@gmail.com> Signed-off-by:
-
Andrea Odetti authored
This patch fixes the bug in DMX_SET_BUFFER_SIZE for the demux. Basically it resets read and write pointers to 0 in case they are beyond the new size of the buffer. Signed-off-by:
-
Hartmut Hackmann authored
This patch makes the tuner work with transonders providing higher symbol rates. It was contributed by Oliver Endriss. Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by:
-
Hartmut Hackmann authored
This patch replaces the c++ style comments. No functional changes Signed-off-by:
-
Hartmut Hackmann authored
Some DVB-S boards, i.e. with the SD1878 tuner, use a 4 MHz reference frequency. This reqires a different setup of the clock PLL. This patch adds an enum to the tda10086_config struct and sets the proper values for the boards. This patch also fixes the DVB-S section of the MD7134_BRIDGE_2 Signed-off-by:
-
Devin Heitmueller authored
tuner-xc2028.c - Drop the severity level of the xc3028 version reporting, since it's only of interest to developers and user's don't need to have it show up in their dmesg output every time they change the channel. Signed-off-by:
Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by:
-
Devin Heitmueller authored
em28xx-core.c - Drop the severity level of the "urb resubmit failed" to debug, since it occurs every time a stream disconnects, which fills the dmesg log Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch fixes several issues on SCODE: 1) The extracting tool weren't generating the proper tags for SCODE. This has almost no effect, since those tags shouldn't be used; 2) DIBCOM52 were using a wrong IF. It should be 5200, instead of 5700; 3) seek_firmware were wanting an exact match for firmware type. This is wrong. As result, no SCODE firmware were loaded; 4) A few files were including the wrong file for seeking demod firmwares; 5) XC3028_FE_DEFAULT can be used, if user doesn't want to load a firmware. However, this weren't documentated. This feature require more testing. Signed-off-by: -
Andrew Morton authored
Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Steven Toth authored
For boards that require the avcore (cx25840) to be active, ensure it gets loaded. Signed-off-by:
-
