- 23 May, 2022 7 commits
-
-
Jakub Kicinski authored
carl9170 has a big union (struct carl9170_cmd) with all the command types in it. But it allocates buffers only large enough for a given command. This upsets GCC 12: drivers/net/wireless/ath/carl9170/cmd.c:125:30: warning: array subscript ‘struct carl9170_cmd[0]’ is partly outside array bounds of ‘unsigned char[8]’ [-Warray-bounds] 125 | tmp->hdr.cmd = cmd; | ~~~~~~~~~~~~~^~~~~ Punt the warning to W=1 for now. Hopefully GCC will learn to recognize which fields are in-bounds. Acked-by:Christian Lamparter <chunkeey@gmail.com> Acked-by:
Kalle Valo <kvalo@kernel.org> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
GCC 12 really doesn't like partial struct allocations: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:2202:32: warning: array subscript ‘struct brcmf_ext_join_params_le[0]’ is partly outside array bounds of ‘void[70]’ [-Warray-bounds] 2202 | ext_join_params->scan_le.passive_time = | ^~ brcmfmac is trying to save 2 bytes at the end by either allocating or not allocating a channel member. Let's keep @join_params_size the "right" size but kmalloc() the full structure. Acked-by: -
Jakub Kicinski authored
GCC 12 says: drivers/net/wireless/intel/iwlwifi/mvm/sta.c:1076:37: warning: array subscript -1 is below array bounds of ‘struct iwl_mvm_tid_data[9]’ [-Warray-bounds] 1076 | if (mvmsta->tid_data[tid].state != IWL_AGG_OFF) | ~~~~~~~~~~~~~~~~^~~~~ Whatever, tid is a bit from for_each_set_bit(), it's clearly unsigned. Acked-by: -
Jakub Kicinski authored
For some reason GCC 12 decided to complain about the common pattern of queuing an object onto a list on the stack in ath6k: inlined from ‘ath6kl_htc_mbox_tx’ at drivers/net/wireless/ath/ath6kl/htc_mbox.c:1142:3: include/linux/list.h:74:19: warning: storing the address of local variable ‘queue’ in ‘*&packet_15(D)->list.prev’ [-Wdangling-pointer=] 74 | new->prev = prev; | ~~~~~~~~~~^~~~~~ Move the warning to W=1, hopefully it goes away with a compiler update. Acked-by: -
Jakub Kicinski authored
The .value is a two-dim array, not a pointer. struct iqk_matrix_regs { bool iqk_done; long value[1][IQK_MATRIX_REG_NUM]; }; Acked-by: -
Jakub Kicinski authored
GCC 12 says: drivers/net/wireless/ath/ath9k/mac.c: In function ‘ath9k_hw_resettxqueue’: drivers/net/wireless/ath/ath9k/mac.c:373:22: warning: array subscript 32 is above array bounds of ‘struct ath9k_tx_queue_info[10]’ [-Warray-bounds] 373 | qi = &ah->txq[q]; | ~~~~~~~^~~ I don't know where it got the 32 from, relegate the warning to W=1+. Acked-by: -
Jakub Kicinski authored
GCC is upset that we check the return value of plfxlc_usb_dev() even tho it can't be NULL: drivers/net/wireless/purelifi/plfxlc/usb.c: In function ‘resume’: drivers/net/wireless/purelifi/plfxlc/usb.c:840:20: warning: the comparison will always evaluate as ‘true’ for the address of ‘dev’ will never be NULL [-Waddress] 840 | if (!pl || !plfxlc_usb_dev(pl)) | ^ plfxlc_usb_dev() returns an address of one of the members of pl, so it's safe to drop these checks. Acked-by:
-
- 22 May, 2022 33 commits
-
-
Nobuhiro Iwamatsu authored
The clock for this driver switched to the common clock controller driver. Therefore, update common clock properties for ethernet device in the binding document. Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Rix authored
cppcheck reports [drivers/net/fddi/skfp/smt.c:750]: (warning) printf format string requires 0 parameters but 2 are given. DB_SBAN is a vararg macro, like DB_ESSN. Remove the extra args and the nl. Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== introduce mt7986 ethernet support Add support for mt7986-eth driver available on mt7986 soc. Changes since v2: - rely on GFP_KERNEL whenever possible - define mtk_reg_map struct to introduce soc register map and avoid macros - improve comments Changes since v1: - drop SRAM option - convert ring->dma to void - convert scratch_ring to void - enable port4 - fix irq dts bindings - drop gmac1 support from mt7986a-rfb dts for the moment ==================== Acked-by:
-
Lorenzo Bianconi authored
Add support for mt7986-eth driver available on mt7986 soc. Tested-by:
Sam Shih <sam.shih@mediatek.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Simplify the code converting scratch_ring pointer to void Signed-off-by:
-
Lorenzo Bianconi authored
Simplify the code converting {tx,rx} ring dma pointer to void Signed-off-by: -
Lorenzo Bianconi authored
Introduce MTK_NETSYS_V2 support. MTK_NETSYS_V2 defines 32B TX/RX DMA descriptors. This is a preliminary patch to add mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
Introduce reg_map structure to add the capability to support different register definitions. Move register definitions in mtk_regmap structure. This is a preliminary patch to introduce mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
Remove mtk_rx_dma structure layout dependency in mtk_rx_alloc/mtk_rx_clean. Initialize to 0 rxd3 and rxd4 in mtk_rx_alloc. This is a preliminary patch to add mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
This is a preliminary to ad mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
Similar to tx counterpart, introduce rxd_size in mtk_soc_data data structure. This is a preliminary patch to add mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to add mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to add mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to add mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
In order to remove mtk_tx_dma size dependency, introduce txd_size in mtk_soc_data data structure. Rely on txd_size in mtk_init_fq_dma() and mtk_dma_free() routines. This is a preliminary patch to add mt7986 ethernet support. Tested-by:
-
Lorenzo Bianconi authored
Move tx dma descriptor configuration in mtk_tx_set_dma_desc routine. This is a preliminary patch to introduce mt7986 ethernet support since it relies on a different tx dma descriptor layout. Tested-by:
-
Lorenzo Bianconi authored
Rely on GFP_KERNEL for dma descriptors mappings in mtk_tx_alloc(), mtk_rx_alloc() and mtk_init_fq_dma() since they are run in non-irq context. Signed-off-by:
-
Lorenzo Bianconi authored
Introduce dts bindings for mt7986 soc in mediatek,net.yaml. Reviewed-by:
-
Lorenzo Bianconi authored
Introduce ethernet nodes in mt7986 bindings in order to enable mt7986a/mt7986b ethernet support. Co-developed-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== eth: silence the GCC 12 array-bounds warnings Silence the array-bounds warnings in Ethernet drivers. v2 uses -Wno-array-bounds directly. ==================== Signed-off-by: -
Jakub Kicinski authored
GCC 12 currently generates a rather inconsistent warning: drivers/net/ethernet/broadcom/tg3.c:17795:51: warning: array subscript 5 is above array bounds of ‘struct tg3_napi[5]’ [-Warray-bounds] 17795 | struct tg3_napi *tnapi = &tp->napi[i]; | ~~~~~~~~^~~ i is guaranteed < tp->irq_max which in turn is either 1 or 5. There are more loops like this one in the driver, but strangely GCC 12 dislikes only this single one. Silence this silliness for now. Signed-off-by: -
Jakub Kicinski authored
GCC 12 gets upset because driver allocates partial struct ice_aqc_sw_rules_elem buffers. The writes are within bounds. Silence these warnings for now, our build bot runs GCC 12 so we won't allow any new instances. Signed-off-by:
-
Jakub Kicinski authored
GCC 12 gets upset because in mtk_foe_entry_commit_subflow() this driver allocates a partial structure. The writes are within bounds. Silence these warnings for now, our build bot runs GCC 12 so we won't allow any new instances. Signed-off-by:
-
Vladimir Oltean authored
The "ok" tc action is useful when placed in front of a more generic filter to exclude some more specific rules from matching it. The ocelot switches can offload this tc action by creating an empty action vector (no _ENA fields set to 1). This makes sense for all of VCAP IS1, IS2 and ES0 (but not for PSFP). Add support for this action. Note that this makes the gact_drop_and_ok_test() selftest pass, where "action ok" is used in front of an "action drop" rule, both offloaded to VCAP IS2. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Streamline Ocelot tc-chains selftest This series changes the output and the argument format of the Ocelot switch selftest so that it is more similar to what can be found in tools/testing/selftests/net/forwarding/. ==================== Signed-off-by: -
Vladimir Oltean authored
Use the standard interface order h1, swp1, swp2, h2 that is used by the forwarding selftest framework. The previous order was confusing even with the ASCII drawing. That isn't needed anymore. This also drops the fixed MAC addresses and uses STABLE_MAC_ADDRS, which ensures the MAC addresses are unique. Signed-off-by:
-
Vladimir Oltean authored
This is a robotic rename as follows: eth0 -> swp1 eth1 -> swp2 eth2 -> h2 eth3 -> h1 This brings the selftest more in line with the other forwarding selftests, where h1 is connected to swp1, and h2 to swp2. Signed-off-by:
-
Vladimir Oltean authored
Bring this driver-specific selftest output in line with the other selftests. Before: Testing VLAN pop.. OK Testing VLAN push.. OK Testing ingress VLAN modification.. OK Testing egress VLAN modification.. OK Testing frame prioritization.. OK After: TEST: VLAN pop [ OK ] TEST: VLAN push [ OK ] TEST: Ingress VLAN modification [ OK ] TEST: Egress VLAN modification [ OK ] TEST: Frame prioritization [ OK ] Signed-off-by:
-
Jakub Kicinski authored
Most protocol-specific pointers in struct net_device are under a respective ifdef. Wireless is the notable exception. Since there's a sizable number of custom-built kernels for datacenter workloads which don't build wireless it seems reasonable to ifdefy those pointers as well. While at it move IPv4 and IPv6 pointers up, those are special for obvious reasons. Acked-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> # ieee802154 Acked-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
-
Uwe Kleine-König authored
An error code returned by devm_clk_get() might have other meanings than "This clock doesn't exist". So use devm_clk_get_optional() and handle all remaining errors as fatal. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Tommaso Merciai authored
RGMII mode can be enable from dp83822 straps, and also writing bit 9 of register 0x17 - RMII and Status Register (RCSR). When phy_interface_is_rgmii rgmii mode must be enabled, same for contrary, this prevents malconfigurations of hw straps References: - https://www.ti.com/lit/gpn/dp83822i p66 Signed-off-by:
Tommaso Merciai <tommaso.merciai@amarulasolutions.com> Co-developed-by:
Michael Trimarchi <michael@amarulasolutions.com> Suggested-by:
Alberto Bianchi <alberto.bianchi@amarulasolutions.com> Tested-by:
-
Muhammad Usama Anjum authored
Add newly added stress_reuseport_listen object to .gitignore file. Fixes: ec8cb4f6 ("net: selftests: Stress reuseport listen") Signed-off-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by:
-
David S. Miller authored
David Howells says: ==================== rxrpc: Miscellaneous changes Here are some miscellaneous changes for AF_RXRPC: (1) Allow the list of local endpoints to be viewed through /proc. (2) Switch to using refcount_t for refcounting. (3) Fix a locking issue found by lockdep. (4) Autogenerate tracing symbol enums from symbol->string maps to make it easier to keep them in sync. (5) Return an error to sendmsg() if a call it tried to set up failed. Because it failed at this point, no notification will be generated for recvmsg to pick up - but userspace still needs to know about the failure. (6) Fix the selection of abort codes generated by internal events. In particular, rxrpc and kafs shouldn't be generating RX_USER_ABORT unless it's because userspace did something to cancel a call. (7) Adjust the interpretation and handling of certain ACK types to try and detect NAT changes causing a call to seem to start mid-flow from a different peer. ==================== Signed-off-by:
-
