- 30 Aug, 2017 40 commits
-
-
Sakari Ailus authored
commit b5212f57 upstream. acpi_graph_get_child_prop_value() is intended to find a child node with a certain property value pair. The check if (!fwnode_property_read_u32(fwnode, prop_name, &nr)) continue; is faulty: fwnode_property_read_u32() returns zero on success, not on failure, leading to comparing values only if the searched property was not found. Moreover, the check is made against the parent device node instead of the child one as it should be. Fixes: 79389a83 (ACPI / property: Add support for remote endpoints) Reported-by:
Hyungwoo Yang <hyungwoo.yang@intel.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> [ rjw: Changelog ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Deucher authored
This reverts commit 2dc1889e. Fixes a suspend and resume regression. bug: https://bugzilla.kernel.org/show_bug.cgi?id=196615Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
fred gao authored
commit ffeaf9aa upstream. once error happens in shadow_indirect_ctx function, the variable wa_ctx->indirect_ctx.obj is not initialized but accessed, so the kernel null point panic occurs. Fixes: 894cf7d1 ("drm/i915/gvt: i915_gem_object_create() returns an error pointer") Signed-off-by:
fred gao <fred.gao@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
commit 7c648bde upstream. Ever since we've parsed VBT child devices, starting from 6acab15a ("drm/i915: use the HDMI DDI buffer translations from VBT"), we've ignored the child device information if more than one child device references the same port. The rationale for this seems lost in time. Since commit 311a2094 ("drm/i915: don't init DP or HDMI when not supported by DDI port") we started using this information more to skip HDMI/DP init if the port wasn't there per VBT child devices. However, at the same time it added port defaults without further explanation. Thus, if the child device info was skipped due to multiple child devices referencing the same port, the device info would be retrieved from the somewhat arbitrary defaults. Finally, when commit bb1d1329 ("drm/i915/vbt: split out defaults that are set when there is no VBT") stopped initializing the defaults whenever VBT is present, thus trusting the VBT more, we stopped initializing ports which were referenced by more than one child device. Apparently at least Asus UX305UA, UX305U, and UX306U laptops have VBT child device blocks which cause this behaviour. Arguably they were shipped with a broken VBT. Relax the rules for multiple references to the same port, and use the first child device info to reference a port. Retain the logic to debug log about this, though. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101745 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196233 Fixes: bb1d1329 ("drm/i915/vbt: split out defaults that are set when there is no VBT") Tested-by:
Oliver Weißbarth <mail@oweissbarth.de> Reported-by:
Didier G <didierg-divers@orange.fr> Reported-by:
Giles Anderson <agander@gmail.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170811113907.6716-1-jani.nikula@intel.comSigned-off-by:
-
Maarten Lankhorst authored
commit a0ffc51e upstream. The last part of drm_atomic_check_only is testing whether we need to fail with -EINVAL when modeset is not allowed, but forgets to return the value when atomic_check() fails first. This results in -EDEADLK being replaced by -EINVAL, and the sanity check in drm_modeset_drop_locks kicks in: [ 308.531734] ------------[ cut here ]------------ [ 308.531791] WARNING: CPU: 0 PID: 1886 at drivers/gpu/drm/drm_modeset_lock.c:217 drm_modeset_drop_locks+0x33/0xc0 [drm] [ 308.531828] Modules linked in: [ 308.532050] CPU: 0 PID: 1886 Comm: kms_atomic Tainted: G U W 4.13.0-rc5-patser+ #5225 [ 308.532082] Hardware name: NUC5i7RYB, BIOS RYBDWi35.86A.0246.2015.0309.1355 03/09/2015 [ 308.532124] task: ffff8800cd9dae00 task.stack: ffff8800ca3b8000 [ 308.532168] RIP: 0010:drm_modeset_drop_locks+0x33/0xc0 [drm] [ 308.532189] RSP: 0018:ffff8800ca3bf980 EFLAGS: 00010282 [ 308.532211] RAX: dffffc0000000000 RBX: ffff8800ca3bfaf8 RCX: 0000000013a171e6 [ 308.532235] RDX: 1ffff10019477f69 RSI: ffffffffa8ba4fa0 RDI: ffff8800ca3bfb48 [ 308.532258] RBP: ffff8800ca3bf998 R08: 0000000000000000 R09: 0000000000000003 [ 308.532281] R10: 0000000079dbe066 R11: 00000000f760b34b R12: 0000000000000001 [ 308.532304] R13: dffffc0000000000 R14: 00000000ffffffea R15: ffff880096889680 [ 308.532328] FS: 00007ff00959cec0(0000) GS:ffff8800d4e00000(0000) knlGS:0000000000000000 [ 308.532359] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 308.532380] CR2: 0000000000000008 CR3: 00000000ca2e3000 CR4: 00000000003406f0 [ 308.532402] Call Trace: [ 308.532440] drm_mode_atomic_ioctl+0x19fa/0x1c00 [drm] [ 308.532488] ? drm_atomic_set_property+0x1220/0x1220 [drm] [ 308.532565] ? avc_has_extended_perms+0xc39/0xff0 [ 308.532593] ? lock_downgrade+0x610/0x610 [ 308.532640] ? drm_atomic_set_property+0x1220/0x1220 [drm] [ 308.532680] drm_ioctl_kernel+0x154/0x1a0 [drm] [ 308.532755] drm_ioctl+0x624/0x8f0 [drm] [ 308.532858] ? drm_atomic_set_property+0x1220/0x1220 [drm] [ 308.532976] ? drm_getunique+0x210/0x210 [drm] [ 308.533061] do_vfs_ioctl+0xd92/0xe40 [ 308.533121] ? ioctl_preallocate+0x1b0/0x1b0 [ 308.533160] ? selinux_capable+0x20/0x20 [ 308.533191] ? do_fcntl+0x1b1/0xbf0 [ 308.533219] ? kasan_slab_free+0xa2/0xb0 [ 308.533249] ? f_getown+0x4b/0xa0 [ 308.533278] ? putname+0xcf/0xe0 [ 308.533309] ? security_file_ioctl+0x57/0x90 [ 308.533342] SyS_ioctl+0x4e/0x80 [ 308.533374] entry_SYSCALL_64_fastpath+0x18/0xad [ 308.533405] RIP: 0033:0x7ff00779e4d7 [ 308.533431] RSP: 002b:00007fff66a043d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 308.533481] RAX: ffffffffffffffda RBX: 000000e7c7ca5910 RCX: 00007ff00779e4d7 [ 308.533560] RDX: 00007fff66a04430 RSI: 00000000c03864bc RDI: 0000000000000003 [ 308.533608] RBP: 00007ff007a5fb00 R08: 000000e7c7ca4620 R09: 000000e7c7ca5e60 [ 308.533647] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000070 [ 308.533685] R13: 0000000000000000 R14: 0000000000000000 R15: 000000e7c7ca5930 [ 308.533770] Code: ff df 55 48 89 e5 41 55 41 54 53 48 89 fb 48 83 c7 50 48 89 fa 48 c1 ea 03 80 3c 02 00 74 05 e8 94 d4 16 e7 48 83 7b 50 00 74 02 <0f> ff 4c 8d 6b 58 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 [ 308.534086] ---[ end trace 77f11e53b1df44ad ]--- Solve this by adding the missing return. This is also a bugfix because we could end up rejecting updates with -EINVAL because of a early -EDEADLK, while if atomic_check ran to completion it might have downgraded the modeset to a fastset. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Testcase: kms_atomic Link: https://patchwork.freedesktop.org/patch/msgid/20170815095706.23624-1-maarten.lankhorst@linux.intel.com Fixes: d34f20d6 ("drm: Atomic modeset ioctl") Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Maarten Lankhorst authored
commit 7f5d6dac upstream. complete_crtc_signaling is freeing fence_state, but when retrying num_fences and fence_state are not zero'd. This caused duplicate fd's in the fence_state array, followed by a BUG_ON in fs/file.c because we reallocate freed memory, and installing over an existing fd, or potential other fun. Zero fence_state and num_fences correctly in the retry loop, which allows kms_atomic_transition to pass. Fixes: beaf5af4 ("drm/fence: add out-fences support") Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Brian Starkey <brian.starkey@arm.com> (v10) Cc: Sean Paul <seanpaul@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by:
-
Jonathan Liu authored
commit 2a596fc9 upstream. The drm_driver lastclose callback is called when the last userspace DRM client has closed. Call drm_fbdev_cma_restore_mode to restore the fbdev console otherwise the fbdev console will stop working. Fixes: 9026e0d1 ("drm: Add Allwinner A10 Display Engine support") Tested-by:
Olliver Schinagl <oliver@schinagl.nl> Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Jonathan Liu <net147@gmail.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Chris Wilson authored
commit fe4600a5 upstream. This is the same bug as we fixed in commit f6cd7dae ("drm: Release driver references to handle before making it available again"), but now the exposure is via the PRIME lookup tables. If we remove the object/handle from the PRIME lut, then a new request for the same object/fd will generate a new handle, thus for a short window that object is known to userspace by two different handles. Fix this by releasing the driver tracking before PRIME. Fixes: 0ff926c7 ("drm/prime: add exported buffers to current fprivs imported buffer list (v2)") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170819120558.6465-1-chris@chris-wilson.co.ukSigned-off-by:
-
Nikhil Mahale authored
commit 491ab470 upstream. Do not leak framebuffer if client provided crtc id found invalid. Signed-off-by:
Nikhil Mahale <nmahale@nvidia.com> Signed-off-by:
-
Dave Martin authored
commit 09662210 upstream. There are some tricky dependencies between the different stages of flushing the FPSIMD register state during exec, and these can race with context switch in ways that can cause the old task's regs to leak across. In particular, a context switch during the memset() can cause some of the task's old FPSIMD registers to reappear. Disabling preemption for this small window would be no big deal for performance: preemption is already disabled for similar scenarios like updating the FPSIMD registers in sigreturn. So, instead of rearranging things in ways that might swap existing subtle bugs for new ones, this patch just disables preemption around the FPSIMD state flushing so that races of this type can't occur here. This brings fpsimd_flush_thread() into line with other code paths. Fixes: 674c242c ("arm64: flush FP/SIMD state correctly after execve()") Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Pavel Tatashin authored
commit 91b540f9 upstream. In recently introduced memblock_discard() there is a reversed logic bug. Memory is freed of static array instead of dynamically allocated one. Link: http://lkml.kernel.org/r/1503511441-95478-2-git-send-email-pasha.tatashin@oracle.com Fixes: 3010f876 ("mm: discard memblock data later") Signed-off-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Reported-by:
Woody Suwalski <terraluna977@gmail.com> Tested-by:
Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric Biggers authored
commit 2b7e8665 upstream. Commit 7c051267 ("mm, fork: make dup_mmap wait for mmap_sem for write killable") made it possible to kill a forking task while it is waiting to acquire its ->mmap_sem for write, in dup_mmap(). However, it was overlooked that this introduced an new error path before a reference is taken on the mm_struct's ->exe_file. Since the ->exe_file of the new mm_struct was already set to the old ->exe_file by the memcpy() in dup_mm(), it was possible for the mmput() in the error path of dup_mm() to drop a reference to ->exe_file which was never taken. This caused the struct file to later be freed prematurely. Fix it by updating mm_init() to NULL out the ->exe_file, in the same place it clears other things like the list of mmaps. This bug was found by syzkaller. It can be reproduced using the following C program: #define _GNU_SOURCE #include <pthread.h> #include <stdlib.h> #include <sys/mman.h> #include <sys/syscall.h> #include <sys/wait.h> #include <unistd.h> static void *mmap_thread(void *_arg) { for (;;) { mmap(NULL, 0x1000000, PROT_READ, MAP_POPULATE|MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); } } static void *fork_thread(void *_arg) { usleep(rand() % 10000); fork(); } int main(void) { fork(); fork(); fork(); for (;;) { if (fork() == 0) { pthread_t t; pthread_create(&t, NULL, mmap_thread, NULL); pthread_create(&t, NULL, fork_thread, NULL); usleep(rand() % 10000); syscall(__NR_exit_group, 0); } wait(NULL); } } No special kernel config options are needed. It usually causes a NULL pointer dereference in __remove_shared_vm_struct() during exit, or in dup_mmap() (which is usually inlined into copy_process()) during fork. Both are due to a vm_area_struct's ->vm_file being used after it's already been freed. Google Bug Id: 64772007 Link: http://lkml.kernel.org/r/20170823211408.31198-1-ebiggers3@gmail.com Fixes: 7c051267 ("mm, fork: make dup_mmap wait for mmap_sem for write killable") Signed-off-by:
Eric Biggers <ebiggers@google.com> Tested-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
-
Eric Biggers authored
commit 263630e8 upstream. If madvise(..., MADV_FREE) split a transparent hugepage, it called put_page() before unlock_page(). This was wrong because put_page() can free the page, e.g. if a concurrent madvise(..., MADV_DONTNEED) has removed it from the memory mapping. put_page() then rightfully complained about freeing a locked page. Fix this by moving the unlock_page() before put_page(). This bug was found by syzkaller, which encountered the following splat: BUG: Bad page state in process syzkaller412798 pfn:1bd800 page:ffffea0006f60000 count:0 mapcount:0 mapping: (null) index:0x20a00 flags: 0x200000000040019(locked|uptodate|dirty|swapbacked) raw: 0200000000040019 0000000000000000 0000000000020a00 00000000ffffffff raw: ffffea0006f60020 ffffea0006f60020 0000000000000000 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set bad because of flags: 0x1(locked) Modules linked in: CPU: 1 PID: 3037 Comm: syzkaller412798 Not tainted 4.13.0-rc5+ #35 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 bad_page+0x230/0x2b0 mm/page_alloc.c:565 free_pages_check_bad+0x1f0/0x2e0 mm/page_alloc.c:943 free_pages_check mm/page_alloc.c:952 [inline] free_pages_prepare mm/page_alloc.c:1043 [inline] free_pcp_prepare mm/page_alloc.c:1068 [inline] free_hot_cold_page+0x8cf/0x12b0 mm/page_alloc.c:2584 __put_single_page mm/swap.c:79 [inline] __put_page+0xfb/0x160 mm/swap.c:113 put_page include/linux/mm.h:814 [inline] madvise_free_pte_range+0x137a/0x1ec0 mm/madvise.c:371 walk_pmd_range mm/pagewalk.c:50 [inline] walk_pud_range mm/pagewalk.c:108 [inline] walk_p4d_range mm/pagewalk.c:134 [inline] walk_pgd_range mm/pagewalk.c:160 [inline] __walk_page_range+0xc3a/0x1450 mm/pagewalk.c:249 walk_page_range+0x200/0x470 mm/pagewalk.c:326 madvise_free_page_range.isra.9+0x17d/0x230 mm/madvise.c:444 madvise_free_single_vma+0x353/0x580 mm/madvise.c:471 madvise_dontneed_free mm/madvise.c:555 [inline] madvise_vma mm/madvise.c:664 [inline] SYSC_madvise mm/madvise.c:832 [inline] SyS_madvise+0x7d3/0x13c0 mm/madvise.c:760 entry_SYSCALL_64_fastpath+0x1f/0xbe Here is a C reproducer: #define _GNU_SOURCE #include <pthread.h> #include <sys/mman.h> #include <unistd.h> #define MADV_FREE 8 #define PAGE_SIZE 4096 static void *mapping; static const size_t mapping_size = 0x1000000; static void *madvise_thrproc(void *arg) { madvise(mapping, mapping_size, (long)arg); } int main(void) { pthread_t t[2]; for (;;) { mapping = mmap(NULL, mapping_size, PROT_WRITE, MAP_POPULATE|MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); munmap(mapping + mapping_size / 2, PAGE_SIZE); pthread_create(&t[0], 0, madvise_thrproc, (void*)MADV_DONTNEED); pthread_create(&t[1], 0, madvise_thrproc, (void*)MADV_FREE); pthread_join(t[0], NULL); pthread_join(t[1], NULL); munmap(mapping, mapping_size); } } Note: to see the splat, CONFIG_TRANSPARENT_HUGEPAGE=y and CONFIG_DEBUG_VM=y are needed. Google Bug Id: 64696096 Link: http://lkml.kernel.org/r/20170823205235.132061-1-ebiggers3@gmail.com Fixes: 854e9ed0 ("mm: support madvise(MADV_FREE)") Signed-off-by:
David Rientjes <rientjes@google.com> Acked-by:
Minchan Kim <minchan@kernel.org> Acked-by:
-
Ulf Hansson authored
commit a23318fe upstream. The commit 8503ff16 ("i2c: designware: Avoid unnecessary resuming during system suspend"), may suggest to the PM core to try out the so called direct_complete path for system sleep. In this path, the PM core treats a runtime suspended device as it's already in a proper low power state for system sleep, which makes it skip calling the system sleep callbacks for the device, except for the ->prepare() and the ->complete() callbacks. However, the PM core may unset the direct_complete flag for a parent device, in case its child device are being system suspended before. In this scenario, the PM core invokes the system sleep callbacks, no matter if the device is runtime suspended or not. Particularly in cases of an existing i2c slave device, the above path is triggered, which breaks the assumption that the i2c device is always runtime resumed whenever the dw_i2c_plat_suspend() is being called. More precisely, dw_i2c_plat_suspend() calls clk_core_disable() and clk_core_unprepare(), for an already disabled/unprepared clock, leading to a splat in the log about clocks calls being wrongly balanced and breaking system sleep. To still allow the direct_complete path in cases when it's possible, but also to keep the fix simple, let's runtime resume the i2c device in the ->suspend() callback, before continuing to put the device into low power state. Note, in cases when the i2c device is attached to the ACPI PM domain, this problem doesn't occur, because ACPI's ->suspend() callback, assigned to acpi_subsys_suspend(), already calls pm_runtime_resume() for the device. It should also be noted that this change does not fix commit 8503ff16 ("i2c: designware: Avoid unnecessary resuming during system suspend"). Because for the non-ACPI case, the system sleep support was already broken prior that point. Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Acked-by:
John Stultz <john.stultz@linaro.org> Tested-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Ross Zwisler authored
commit fffa281b upstream. In DAX there are two separate places where the 2MiB range of a PMD is defined. The first is in the page tables, where a PMD mapping inserted for a given address spans from (vmf->address & PMD_MASK) to ((vmf->address & PMD_MASK) + PMD_SIZE - 1). That is, from the 2MiB boundary below the address to the 2MiB boundary above the address. So, for example, a fault at address 3MiB (0x30 0000) falls within the PMD that ranges from 2MiB (0x20 0000) to 4MiB (0x40 0000). The second PMD range is in the mapping->page_tree, where a given file offset is covered by a radix tree entry that spans from one 2MiB aligned file offset to another 2MiB aligned file offset. So, for example, the file offset for 3MiB (pgoff 768) falls within the PMD range for the order 9 radix tree entry that ranges from 2MiB (pgoff 512) to 4MiB (pgoff 1024). This system works so long as the addresses and file offsets for a given mapping both have the same offsets relative to the start of each PMD. Consider the case where the starting address for a given file isn't 2MiB aligned - say our faulting address is 3 MiB (0x30 0000), but that corresponds to the beginning of our file (pgoff 0). Now all the PMDs in the mapping are misaligned so that the 2MiB range defined in the page tables never matches up with the 2MiB range defined in the radix tree. The current code notices this case for DAX faults to storage with the following test in dax_pmd_insert_mapping(): if (pfn_t_to_pfn(pfn) & PG_PMD_COLOUR) goto unlock_fallback; This test makes sure that the pfn we get from the driver is 2MiB aligned, and relies on the assumption that the 2MiB alignment of the pfn we get back from the driver matches the 2MiB alignment of the faulting address. However, faults to holes were not checked and we could hit the problem described above. This was reported in response to the NVML nvml/src/test/pmempool_sync TEST5: $ cd nvml/src/test/pmempool_sync $ make TEST5 You can grab NVML here: https://github.com/pmem/nvml/ The dmesg warning you see when you hit this error is: WARNING: CPU: 13 PID: 2900 at fs/dax.c:641 dax_insert_mapping_entry+0x2df/0x310 Where we notice in dax_insert_mapping_entry() that the radix tree entry we are about to replace doesn't match the locked entry that we had previously inserted into the tree. This happens because the initial insertion was done in grab_mapping_entry() using a pgoff calculated from the faulting address (vmf->address), and the replacement in dax_pmd_load_hole() => dax_insert_mapping_entry() is done using vmf->pgoff. In our failure case those two page offsets (one calculated from vmf->address, one using vmf->pgoff) point to different order 9 radix tree entries. This failure case can result in a deadlock because the radix tree unlock also happens on the pgoff calculated from vmf->address. This means that the locked radix tree entry that we swapped in to the tree in dax_insert_mapping_entry() using vmf->pgoff is never unlocked, so all future faults to that 2MiB range will block forever. Fix this by validating that the faulting address's PMD offset matches the PMD offset from the start of the file. This check is done at the very beginning of the fault and covers faults that would have mapped to storage as well as faults to holes. I left the COLOUR check in dax_pmd_insert_mapping() in place in case we ever hit the insanity condition where the alignment of the pfn we get from the driver doesn't match the alignment of the userspace address. Link: http://lkml.kernel.org/r/20170822222436.18926-1-ross.zwisler@linux.intel.comSigned-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by:
"Slusarz, Marcin" <marcin.slusarz@intel.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
-
Kirill A. Shutemov authored
commit 435c0b87 upstream. /sys/kernel/mm/transparent_hugepage/shmem_enabled controls if we want to allocate huge pages when allocate pages for private in-kernel shmem mount. Unfortunately, as Dan noticed, I've screwed it up and the only way to make kernel allocate huge page for the mount is to use "force" there. All other values will be effectively ignored. Link: http://lkml.kernel.org/r/20170822144254.66431-1-kirill.shutemov@linux.intel.com Fixes: 5a6e75f8 ("shmem: prepare huge= mount option and sysfs knob") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Chen Yu authored
commit 556b969a upstream. There is a problem that when counting the pages for creating the hibernation snapshot will take significant amount of time, especially on system with large memory. Since the counting job is performed with irq disabled, this might lead to NMI lockup. The following warning were found on a system with 1.5TB DRAM: Freezing user space processes ... (elapsed 0.002 seconds) done. OOM killer disabled. PM: Preallocating image memory... NMI watchdog: Watchdog detected hard LOCKUP on cpu 27 CPU: 27 PID: 3128 Comm: systemd-sleep Not tainted 4.13.0-0.rc2.git0.1.fc27.x86_64 #1 task: ffff9f01971ac000 task.stack: ffffb1a3f325c000 RIP: 0010:memory_bm_find_bit+0xf4/0x100 Call Trace: swsusp_set_page_free+0x2b/0x30 mark_free_pages+0x147/0x1c0 count_data_pages+0x41/0xa0 hibernate_preallocate_memory+0x80/0x450 hibernation_snapshot+0x58/0x410 hibernate+0x17c/0x310 state_store+0xdf/0xf0 kobj_attr_store+0xf/0x20 sysfs_kf_write+0x37/0x40 kernfs_fop_write+0x11c/0x1a0 __vfs_write+0x37/0x170 vfs_write+0xb1/0x1a0 SyS_write+0x55/0xc0 entry_SYSCALL_64_fastpath+0x1a/0xa5 ... done (allocated 6590003 pages) PM: Allocated 26360012 kbytes in 19.89 seconds (1325.28 MB/s) It has taken nearly 20 seconds(2.10GHz CPU) thus the NMI lockup was triggered. In case the timeout of the NMI watch dog has been set to 1 second, a safe interval should be 6590003/20 = 320k pages in theory. However there might also be some platforms running at a lower frequency, so feed the watchdog every 100k pages. [yu.c.chen@intel.com: simplification] Link: http://lkml.kernel.org/r/1503460079-29721-1-git-send-email-yu.c.chen@intel.com [yu.c.chen@intel.com: use interval of 128k instead of 100k to avoid modulus] Link: http://lkml.kernel.org/r/1503328098-5120-1-git-send-email-yu.c.chen@intel.comSigned-off-by:
Chen Yu <yu.c.chen@intel.com> Reported-by:
Jan Filipcewicz <jan.filipcewicz@intel.com> Suggested-by:
-
Vineet Gupta authored
commit b5ddb6d5 upstream. PAE40 confiuration in hardware extends some of the address registers for TLB/cache ops to 2 words. So far kernel was NOT setting the higher word if feature was not enabled in software which is wrong. Those need to be set to 0 in such case. Normally this would be done in the cache flush / tlb ops, however since these registers only exist conditionally, this would have to be conditional to a flag being set on boot which is expensive/ugly - specially for the more common case of PAE exists but not in use. Optimize that by zero'ing them once at boot - nobody will write to them afterwards Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Alexey Brodkin authored
commit 7d79cee2 upstream. It is necessary to explicitly set both SLC_AUX_RGN_START1 and SLC_AUX_RGN_END1 which hold MSB bits of the physical address correspondingly of region start and end otherwise SLC region operation is executed in unpredictable manner Without this patch, SLC flushes on HSDK (IOC disabled) were taking seconds. Reported-by:
Vladimir Kondratiev <vladimir.kondratiev@intel.com> Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
-
Alexey Brodkin authored
commit b37174d9 upstream. c70c4733 "ARCv2: SLC: Make sure busy bit is set properly on SLC flushing" fixes problem for entire SLC operation where the problem was initially caught. But given a nature of the issue it is perfectly possible for busy bit to be read incorrectly even when region operation was started. So extending initial fix for regional operation as well. Signed-off-by:
-
Takashi Sakamoto authored
commit dbd7396b upstream. When failing sound card registration after initializing stream data, this module leaves allocated data in stream data. This commit fixes the bug. Fixes: 9b2bb4f2 ('ALSA: firewire-motu: add stream management functionality') Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Sakamoto authored
commit 0c264af7 upstream. When calling 'iso_resource_free()' for uninitialized data, this function causes NULL pointer dereference due to its 'unit' member. This occurs when unplugging audio and music units on IEEE 1394 bus at failure of card registration. This commit fixes the bug. The bug exists since kernel v4.5. Fixes: 324540c4 ('ALSA: fireface: postpone sound card registration') at v4.12 Fixes: 8865a31e ('ALSA: firewire-motu: postpone sound card registration') at v4.12 Fixes: b610386c ('ALSA: firewire-tascam: deleyed registration of sound card') at v4.7 Fixes: 86c8dd7f ('ALSA: firewire-digi00x: delayed registration of sound card') at v4.7 Fixes: 6c29230e ('ALSA: oxfw: delayed registration of sound card') at v4.7 Fixes: 7d3c1d59 ('ALSA: fireworks: delayed registration of sound card') at v4.7 Fixes: 04a2c73c ('ALSA: bebob: delayed registration of sound card') at v4.7 Fixes: b59fb190 ('ALSA: dice: postpone card registration') at v4.5 Signed-off-by:
-
Takashi Iwai authored
commit bbba6f9d upstream. Lenovo G50-70 (17aa:3978) with Conexant codec chip requires the similar workaround for the inverted stereo dmic like other Lenovo models. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1020657Signed-off-by:
-
Takashi Iwai authored
commit 88c54cdf upstream. When user tries to replace the user-defined control TLV, the kernel checks the change of its content via memcmp(). The problem is that the kernel passes the return value from memcmp() as is. memcmp() gives a non-zero negative value depending on the comparison result, and this shall be recognized as an error code. The patch covers that corner-case, return 1 properly for the changed TLV. Fixes: 8aa9b586 ("[ALSA] Control API - more robust TLV implementation") Signed-off-by:
-
Joakim Tjernlund authored
commit 07b3b5e9 upstream. These headsets reports a lot of: cannot set freq 44100 to ep 0x81 and need a small delay between sample rate settings, just like Zoom R16/24. Add both headsets to the Zoom R16/24 quirk for a 1 ms delay between control msgs. Signed-off-by:
Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by:
-
Paolo Bonzini authored
commit c469268c upstream. If the host has protection keys disabled, we cannot read and write the guest PKRU---RDPKRU and WRPKRU fail with #GP(0) if CR4.PKE=0. Block the PKU cpuid bit in that case. This ensures that guest_CR4.PKE=1 implies host_CR4.PKE=1. Fixes: 1be0e61cReviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit 38cfd5e3 upstream. The host pkru is restored right after vcpu exit (commit 1be0e61c), so KVM_GET_XSAVE will return the host PKRU value instead. Fix this by using the guest PKRU explicitly in fill_xsave and load_xsave. This part is based on a patch by Junkang Fu. The host PKRU data may also not match the value in vcpu->arch.guest_fpu.state, because it could have been changed by userspace since the last time it was saved, so skip loading it in kvm_load_guest_fpu. Reported-by:
Junkang Fu <junkang.fjk@alibaba-inc.com> Cc: Yang Zhang <zy107165@alibaba-inc.com> Fixes: 1be0e61cSigned-off-by:
-
Paolo Bonzini authored
commit b9dd21e1 upstream. Move it to struct kvm_arch_vcpu, replacing guest_pkru_valid with a simple comparison against the host value of the register. The write of PKRU in addition can be skipped if the guest has not enabled the feature. Once we do this, we need not test OSPKE in the host anymore, because guest_CR4.PKE=1 implies host_CR4.PKE=1. The static PKU test is kept to elide the code on older CPUs. Suggested-by:
Yang Zhang <zy107165@alibaba-inc.com> Fixes: 1be0e61cReviewed-by:
-
Heiko Carstens authored
commit 857b8de9 upstream. sthyi should only generate a specification exception if the function code is zero and the response buffer is not on a 4k boundary. The current code would also test for unknown function codes if the response buffer, that is currently only defined for function code 0, is not on a 4k boundary and incorrectly inject a specification exception instead of returning with condition code 3 and return code 4 (unsupported function code). Fix this by moving the boundary check. Fixes: 95ca2cb5 ("KVM: s390: Add sthyi emulation") Reviewed-by:
Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
commit 4a4eefcd upstream. The sthyi inline assembly misses register r3 within the clobber list. The sthyi instruction will always write a return code to register "R2+1", which in this case would be r3. Due to that we may have register corruption and see host crashes or data corruption depending on how gcc decided to allocate and use registers during compile time. Fixes: 95ca2cb5 ("KVM: s390: Add sthyi emulation") Reviewed-by:
-
Masaki Ota authored
commit 4a646580 upstream. Fixed the issue that two finger scroll does not work correctly on V8 protocol. The cause is that V8 protocol X-coordinate decode is wrong at SS4 PLUS device. I added SS4 PLUS X decode definition. Mote notes: the problem manifests itself by the commit e7348396 ("Input: ALPS - fix V8+ protocol handling (73 03 28)"), where a fix for the V8+ protocol was applied. Although the culprit must have been present beforehand, the two-finger scroll worked casually even with the wrongly reported values by some reason. It got broken by the commit above just because it changed x_max value, and this made libinput correctly figuring the MT events. Since the X coord is reported as falsely doubled, the events on the right-half side go outside the boundary, thus they are no longer handled. This resulted as a broken two-finger scroll. One finger event is decoded differently, and it didn't suffer from this problem. The problem was only about MT events. --tiwai Fixes: e7348396 ("Input: ALPS - fix V8+ protocol handling (73 03 28)") Signed-off-by:
Masaki Ota <masaki.ota@jp.alps.com> Tested-by:
Paul Donohue <linux-kernel@PaulSD.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
KT Liao authored
commit 1d2226e4 upstream. Add ELAN0602 to the list of known ACPI IDs to enable support for ELAN touchpads found in Lenovo Yoga310. Signed-off-by:
KT Liao <kt.liao@emc.com.tw> Signed-off-by:
-
Aaron Ma authored
commit ec667683 upstream. Synaptics add new TP firmware ID: 0x2 and 0x3, for now both lower 2 bits are indicated as TP. Change the constant to bitwise values. This makes trackpoint to be recognized on Lenovo Carbon X1 Gen5 instead of it being identified as "PS/2 Generic Mouse". Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
-
Edward Cree authored
[ Upstream commit 9305706c ] We have to subtract the src max from the dst min, and vice-versa, since (e.g.) the smallest result comes from the largest subtrahend. Fixes: 48461135 ("bpf: allow access into map value arrays") Signed-off-by:
Edward Cree <ecree@solarflare.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 4cabc5b1 ] Edward reported that there's an issue in min/max value bounds tracking when signed and unsigned compares both provide hints on limits when having unknown variables. E.g. a program such as the following should have been rejected: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff8a94cda93400 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 11: (65) if r1 s> 0x1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 14: (b7) r0 = 0 15: (95) exit What happens is that in the first part ... 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 ... r1 carries an unsigned value, and is compared as unsigned against a register carrying an immediate. Verifier deduces in reg_set_min_max() that since the compare is unsigned and operation is greater than (>), that in the fall-through/false case, r1's minimum bound must be 0 and maximum bound must be r2. Latter is larger than the bound and thus max value is reset back to being 'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now 'R1=inv,min_value=0'. The subsequent test ... 11: (65) if r1 s> 0x1 goto pc+2 ... is a signed compare of r1 with immediate value 1. Here, verifier deduces in reg_set_min_max() that since the compare is signed this time and operation is greater than (>), that in the fall-through/false case, we can deduce that r1's maximum bound must be 1, meaning with prior test, we result in r1 having the following state: R1=inv,min_value=0,max_value=1. Given that the actual value this holds is -8, the bounds are wrongly deduced. When this is being added to r0 which holds the map_value(_adj) type, then subsequent store access in above case will go through check_mem_access() which invokes check_map_access_adj(), that will then probe whether the map memory is in bounds based on the min_value and max_value as well as access size since the actual unknown value is min_value <= x <= max_value; commit fce366a9 ("bpf, verifier: fix alu ops against map_value{, _adj} register types") provides some more explanation on the semantics. It's worth to note in this context that in the current code, min_value and max_value tracking are used for two things, i) dynamic map value access via check_map_access_adj() and since commit 06c1c049 ("bpf: allow helpers access to variable memory") ii) also enforced at check_helper_mem_access() when passing a memory address (pointer to packet, map value, stack) and length pair to a helper and the length in this case is an unknown value defining an access range through min_value/max_value in that case. The min_value/max_value tracking is /not/ used in the direct packet access case to track ranges. However, the issue also affects case ii), for example, the following crafted program based on the same principle must be rejected as well: 0: (b7) r2 = 0 1: (bf) r3 = r10 2: (07) r3 += -512 3: (7a) *(u64 *)(r10 -16) = -8 4: (79) r4 = *(u64 *)(r10 -16) 5: (b7) r6 = -1 6: (2d) if r4 > r6 goto pc+5 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 7: (65) if r4 s> 0x1 goto pc+4 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 8: (07) r4 += 1 9: (b7) r5 = 0 10: (6a) *(u16 *)(r10 -512) = 0 11: (85) call bpf_skb_load_bytes#26 12: (b7) r0 = 0 13: (95) exit Meaning, while we initialize the max_value stack slot that the verifier thinks we access in the [1,2] range, in reality we pass -7 as length which is interpreted as u32 in the helper. Thus, this issue is relevant also for the case of helper ranges. Resetting both bounds in check_reg_overflow() in case only one of them exceeds limits is also not enough as similar test can be created that uses values which are within range, thus also here learned min value in r1 is incorrect when mixed with later signed test to create a range: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff880ad081fa00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (65) if r1 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 14: (b7) r0 = 0 15: (95) exit This leaves us with two options for fixing this: i) to invalidate all prior learned information once we switch signed context, ii) to track min/max signed and unsigned boundaries separately as done in [0]. (Given latter introduces major changes throughout the whole verifier, it's rather net-next material, thus this patch follows option i), meaning we can derive bounds either from only signed tests or only unsigned tests.) There is still the case of adjust_reg_min_max_vals(), where we adjust bounds on ALU operations, meaning programs like the following where boundaries on the reg get mixed in context later on when bounds are merged on the dst reg must get rejected, too: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff89b2bf87ce00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+6 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (b7) r7 = 1 12: (65) if r7 s> 0x0 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp 13: (b7) r0 = 0 14: (95) exit from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp 15: (0f) r7 += r1 16: (65) if r7 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 17: (0f) r0 += r7 18: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 19: (b7) r0 = 0 20: (95) exit Meaning, in adjust_reg_min_max_vals() we must also reset range values on the dst when src/dst registers have mixed signed/ unsigned derived min/max value bounds with one unbounded value as otherwise they can be added together deducing false boundaries. Once both boundaries are established from either ALU ops or compare operations w/o mixing signed/unsigned insns, then they can safely be added to other regs also having both boundaries established. Adding regs with one unbounded side to a map value where the bounded side has been learned w/o mixing ops is possible, but the resulting map value won't recover from that, meaning such op is considered invalid on the time of actual access. Invalid bounds are set on the dst reg in case i) src reg, or ii) in case dst reg already had them. The only way to recover would be to perform i) ALU ops but only 'add' is allowed on map value types or ii) comparisons, but these are disallowed on pointers in case they span a range. This is fine as only BPF_JEQ and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers which potentially turn them into PTR_TO_MAP_VALUE type depending on the branch, so only here min/max value cannot be invalidated for them. In terms of state pruning, value_from_signed is considered as well in states_equal() when dealing with adjusted map values. With regards to breaking existing programs, there is a small risk, but use-cases are rather quite narrow where this could occur and mixing compares probably unlikely. Joint work with Josef and Edward. [0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html Fixes: 48461135 ("bpf: allow access into map value arrays") Reported-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
John Fastabend authored
[ Upstream commit 43188702 ] Currently the verifier does not track imm across alu operations when the source register is of unknown type. This adds additional pattern matching to catch this and track imm. We've seen LLVM generating this pattern while working on cilium. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 68a66d14 ] This important to call qdisc_tree_reduce_backlog() after changing queue length. Parent qdisc should deactivate class in ->qlen_notify() called from qdisc_tree_reduce_backlog() but this happens only if qdisc->q.qlen in zero. Missed class deactivations leads to crashes/warnings at picking packets from empty qdisc and corrupting state at reactivating this class in future. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 86a7996c ("net_sched: introduce qdisc_replace() helper") Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 4f8a881a ] As we know in some target's checkentry it may dereference par.entryinfo to check entry stuff inside. But when sched action calls xt_check_target, par.entryinfo is set with NULL. It would cause kernel panic when calling some targets. It can be reproduce with: # tc qd add dev eth1 ingress handle ffff: # tc filter add dev eth1 parent ffff: u32 match u32 0 0 action xt \ -j ECN --ecn-tcp-remove It could also crash kernel when using target CLUSTERIP or TPROXY. By now there's no proper value for par.entryinfo in ipt_init_target, but it can not be set with NULL. This patch is to void all these panics by setting it with an ipt_entry obj with all members = 0. Note that this issue has been there since the very beginning. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit b024d949 ] list.dev has not been initialized and so the copy_to_user is copying data from the stack back to user space which is a potential information leak. Fix this ensuring all of list is initialized to zero. Detected by CoverityScan, CID#1357894 ("Uninitialized scalar variable") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Huy Nguyen authored
[ Upstream commit ca3d89a3 ] enable_4k_uar module parameter was added in patch cited below to address the backward compatibility issue in SRIOV when the VM has system's PAGE_SIZE uar implementation and the Hypervisor has 4k uar implementation. The above compatibility issue does not exist in the non SRIOV case. In this patch, we always enable 4k uar implementation if SRIOV is not enabled on mlx4's supported cards. Fixes: 76e39ccf ("net/mlx4_core: Fix backward compatibility on VFs") Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
