Simple binding so mostly straight forward to convert.
Original binding was unclear on how many interrupts there are.
The device has two such lines, whilst I believe the driver currently
only uses one at a time.  The binding should allow both to be specified.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
Link: https://lore.kernel.org/r/20201031184854.745828-43-jic23@kernel.org

Very simple binding hence a straight forward conversion.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Robert Yang <decatf@gmail.com>
Link: https://lore.kernel.org/r/20201031184854.745828-42-jic23@kernel.org

One question in here is whether we want to constrain the number of
interrupts.  Some parts definitely only have 1 such pin, and others
2 pins but I can not find information on the bma254.

Oleksandr's email address is bouncing so I've listed myself as
maintainer for this binding until someone else steps up.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201031184854.745828-41-jic23@kernel.org

This is a more complex binding. Whilst conversion is straight forward
I am unsure if the full nature of required properties has been captured.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20201031184854.745828-39-jic23@kernel.org

Simple binding so straight forward format conversion.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20201031184854.745828-38-jic23@kernel.org

Straight forward conversion.  Not heard from Ivan in a while so if the
email bounces, I'll change the maintainer to myself for this binding unless
anyone else comes forwards.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201031184854.745828-37-jic23@kernel.org

Renamed to match a listed compatible rather than relying on wildcards
with all their usual problems.

Dropped the reference supply as a requirement as at least one dtsi doesn't
include it and the example never did.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201031184854.745828-36-jic23@kernel.org

Simple conversion of the binding doc for this subnode of the palmas
PMIC.
Given age of driver and lack interaction with original authors,
I've guessed at Tony for a maintainer on this one.  Tony, if you
are happy with that great, otherwise I can default back to myself.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20201031184854.745828-35-jic23@kernel.org

The current driver and indeed binding are named after a part that they
do not list in the compatible.  Hence renamed the binding to reflect
one that does.

>From the driver it looks like there is a lot more backwards compatibility
than the binding currently reflects. We could consider expressing that
more explicitly in the yaml for the compatible property. I have
added one explicit pair that was present in the upstream dtsi files.

I added Matthias alongside Zhiyong Tao because I don't think
Zhiyong Tao has reviewed recent patches.  Please let me know if this
isn't the right thing to do.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Zhiyong Tao <zhiyong.tao@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20201031184854.745828-34-jic23@kernel.org

A few questions came up in this one.
1) Why does the txt file document io-channel-ranges as a required property.
   That property is for iio-channel consumers, and this is a provider.
   I have dropped it.
2) The example had an @180a6000 for the ADC but given it uses syscon for
   all access, it doesn't have its own reg etc.  I've dropped that from
   the binding example.

Note this example was lifted directly from bcm-cygnus.dtsi so both
issues are present there as well.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Link: https://lore.kernel.org/r/20201031184854.745828-33-jic23@kernel.org

Merge tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 5.11 cycle

Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.

Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).

Listed by manufacturer
  - dht11 temperature(drop)
  - adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
    adi,adis16480 adi,adf4350
  - ams,as3935
  - asahi-kasei,ak8974
  - atmel,sama5d2-adc
  - avago,apds9300 avago,apds9960
  - bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
  - brcm,iproc-static-adc
  - capella,cm36651
  - domintech,dmard06(drop)
  - fsl,mag3110 fsl,mma8452 fsl,vf610-dac
  - hoperf,hp03
  - honeywell,hmc5843
  - kionix,kxcjk1013
  - maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
    maxim,max31856 maxim,max31855k maxim,max44009
    maxim,max5481 maxim,max5821
  - meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
  - mediatek,mt2701-auxadc
  - melexis,mlx90614 melexis,mlx90632
  - memsic,mmc35240(drop)
  - microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
  - murata,zap2326
  - nxp,fxas21002c nxp,lpc1850-dac
  - pni,rm3100
  - qcom,pm8018-adc qcom,spmi-iadc
  - renesas,isl29501 renesas,rcar-gyroadc
  - samsung,sensorhub-rinato
  - sensiron,sgp30
  - sentech,sx9500
  - sharp,gp2ap020a00f
  - st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
  - ti,adc084s021 ti,ads124s08
    ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
    ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
  - upisemi,us51882
  - vishay,vcnl4035
  - x-powers,axp209

New device support
* adi,ad5685
  - Add support for AD5338R dual output 10-bit DAC
  - Add DT-binding doc.
* mediatek,mt6360
  - New driver for this SoC ADC with bindings and using new channel label
    support in the IIO core.
* st,lsm6dsx
  - Add support for LSM6DST

Core:
* Add "label" to device channels, provided via a new core callback. Including
  DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
  no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
  any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup

Features
* semtech,sx9310
  - Add control of hardware gain, proximity thresholds, hysteresis and
    debounce.
  - Increase what information on hardware configuration can be provided
    via DT.

Cleanup and minor features
* adi,ad5685
  - Add of_match_table
* adi,ad7292
  - Drop pointless spi_set_drvdata() call
* adi,ad7298
  - Drop platform data and tidy up external reference config.
* adi,ad7303
  - Drop platform data handling as unused.
* adi,ad7768
  - Add new label attribute for channels provided from dt.
* adi,ad7887
  - devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
  - Drop pointless spi_set_drvdata() call
* adi,adis16209
  - Drop pointless spi_set_drvdata() call
* adi,adis16240
  - White space fixup
* adi,adxl372
  - use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
  - Drop pointless semicolon.
* amstaos,tsl2563
  - Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
  - Use of_device_get_match_data() instead of open coding it.
  - Constify some driver data
  - Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
  - Drop platform data as mostly dead code.
  - Tidy up reference voltage logic
* atmel-sama5d2
  - Drop a pointless semicolon
  - Merge buffer and trigger init into a separate function
  - Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
  - Drop a pointless semicolon
* bosch,bmc150
  - Drop a pointless semicolon
  - Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
  - Drop a pointless semicolon
* fsl,mma8452
  - Constification
* (google),cros_ec
  - Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
  - Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
  - Drop a pointless semicolon
* invensense,icm426xx
  - Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
  - Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
  - Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
  - Stop relying on users counter form input device in ISR.
* st,lsm6dsx
  - add vdd and vddio regulator control (including binding update)
* st,stm32-adc
  - Tidy up code for dma transfers.
  - Adapt clock duty cycle for proper functioning. Note no known problems
    with existing boards.
* st,vl53l0x-i2c
  - Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
  - Put back i2c_device_id table as needed for greybus probing.

* tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
  dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
  dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.
  dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion
  dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion.
  dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion
  dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion.
  dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion
  dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion
  dt-bindings:iio:light:st,vl6180: txt to yaml format conversion.
  dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion
  dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor
  dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion.
  dt-bindings:iio:light:ti,opt3001: txt to yaml conversion
  dt-bindings:iio:light:maxim,max44009: txt to yaml conversion.
  dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion.
  dt-bindings:iio:light:capella,cm36651: txt to yaml conversion.
  dt-bindings:iio:light:avago,apds9960: txt to yaml conversion
  dt-bindings:iio:light:avago,apds9300: txt to yaml conversion.
  dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion
  dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion
  ...

This is a very small binding.  It might make sense at some stage
to just roll it into the parent mfd.  For now, converted as is.
The main advantage of this document is the identification of the
channel index values when this is used as a provider of ADC channels
to consumers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201031184854.745828-32-jic23@kernel.org

The structures defined in the dpsw-cmd.h header file describe exactly
the layout of commands accepted by the MC firmware. Make sure that all
these structures are packed.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20201119165017.806696-4-ciorneiioana@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When in the PREPARE state of a switchdev transaction, check if the
requested VLAN is not already configured on the switch port. This keeps
us from getting into a WARNING as below.

[ 1389.683296] dpaa2_ethsw dpsw.0 eth0: VLAN 2 already configured
[ 1389.689125] ------------[ cut here ]------------
[ 1389.694084] eth0: Commit of object (id=1) failed.
[ 1389.698863] WARNING: CPU: 0 PID: 613 at net/switchdev/switchdev.c:277 switchdev_port_obj_add_now+0xcc/0x110
[ 1389.708589] Modules linked in:
[ 1389.711634] CPU: 0 PID: 613 Comm: bridge Not tainted 5.9.0-rc2-next-20200828-00112-g7172078477c5 #59
[ 1389.720753] Hardware name: NXP Layerscape LX2160ARDB (DT)
[ 1389.726139] pstate: 40000005 (nZcv daif -PAN -UAO BTYPE=--)
[ 1389.731698] pc : switchdev_port_obj_add_now+0xcc/0x110
[ 1389.736824] lr : switchdev_port_obj_add_now+0xcc/0x110
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20201119165017.806696-3-ciorneiioana@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Export the DPSW_CNT_ING_NO_BUFFER_DISCARD counter in ethtool for each
switch interface. This is useful for debugging purposes.
Signed-off-by: Ionut-robert Aron <ionut-robert.aron@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20201119165017.806696-2-ciorneiioana@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The bool variable is2T is true, so the if statement is redundant.
we can directly set the variable bound to 8 and remove the if
statement.
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1605961041-12875-1-git-send-email-kaixuxia@tencent.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The two bool variables singletone and carrier_sup are always false
and the following if statement can't be true, these code are useless,
so remove them.
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1605442400-16108-1-git-send-email-kaixuxia@tencent.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use kobj_to_dev() instead of container_of()
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20201117025933.668938-1-dingxiang@cmss.chinamobile.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 4524ac56 ("staging: mfd: add a PMIC driver for HiSilicon 6421 SPMI version")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20201118103724.57451-1-wanghai38@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MFD_CORE is selected by MFD_HI6421_SPMI, and MFD_CORE depends on
HAS_IOMEM. If HAS_IOMEM is not set, this can cause a conflict in Kconfig
resolution, yielding the following error:

WARNING: unmet direct dependencies detected for MFD_CORE
  Depends on [n]: HAS_IOMEM [=n]
  Selected by [y]:
  - MFD_HI6421_SPMI [=y] && STAGING [=y] && OF [=y] && SPMI [=y]

By specifying HAS_IOMEM as a dependency for MFD_HI6421_SPMI (as
SPMI_HISI3670 already dows), this issue is resolved, and no such warning
appears when building on architectures without HAS_IOMEM.
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20201119082903.3601758-1-davidgow@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following warnings reported by sparse, by adding
missing __force annotations.

drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32
drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32
drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32
drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32
drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32
drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32

drivers/staging/hikey9xx/hisi-spmi-controller.c:239:25: warning: cast from restricted __be32

Rationale for #164:
data is declared as u32, and it is read and then converted by means of
be32_to_cpu(). Said function expects a __be32 but data is u32, therefore
there's a type missmatch here.

Rationale for #239:
Is the dual of #164. This time data going to be  written so it
needs to be converted from cpu to __be32, but writel() expects u32 and the
output of cpu_to_be32 returns a __be32.
Signed-off-by: Juan Antonio Aldea-Armenteros <juant.aldea@gmail.com>
Link: https://lore.kernel.org/r/20201119122737.189675-1-juant.aldea@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/5a5a8f2489fbf61f65f0241c349737f7c9ad59ca.1605896060.git.gustavoars@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/673bd9f27bcc2df8c9d12be94f54001d8066d4ab.1605896060.git.gustavoars@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/863fda60074850bc976974af48fa769c64725e64.1605896059.git.gustavoars@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/cd07e3ebc11b44a3fe016341438e24cf950994a3.1605896059.git.gustavoars@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the staging/IIO fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull HID fixes from Jiri Kosina:

 - Various functionality / regression fixes for Logitech devices from
   Hans de Goede

 - Fix for (recently added) GPIO support in mcp2221 driver from Lars
   Povlsen

 - Power management handling fix/quirk in i2c-hid driver for certain
   BIOSes that have strange aproach to power-cycle from Hans de Goede

 - a few device ID additions and device-specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-dj: Fix Dinovo Mini when paired with a MX5x00 receiver
  HID: logitech-dj: Fix an error in mse_bluetooth_descriptor
  HID: Add Logitech Dinovo Edge battery quirk
  HID: logitech-hidpp: Add HIDPP_CONSUMER_VENDOR_KEYS quirk for the Dinovo Edge
  HID: logitech-dj: Handle quad/bluetooth keyboards with a builtin trackpad
  HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devices
  HID: mcp2221: Fix GPIO output handling
  HID: hid-sensor-hub: Fix issue with devices with no report ID
  HID: i2c-hid: Put ACPI enumerated devices in D3 on shutdown
  HID: add support for Sega Saturn
  HID: cypress: Support Varmilo Keyboards' media hotkeys
  HID: ite: Replace ABS_MISC 120/121 events with touchpad on/off keypresses
  HID: logitech-hidpp: Add PID for MX Anywhere 2
  HID: uclogic: Add ID for Trust Flex Design Tablet

Pull scheduler fixes from Thomas Gleixner:
 "A couple of scheduler fixes:

   - Make the conditional update of the overutilized state work
     correctly by caching the relevant flags state before overwriting
     them and checking them afterwards.

   - Fix a data race in the wakeup path which caused loadavg on ARM64
     platforms to become a random number generator.

   - Fix the ordering of the iowaiter accounting operations so it can't
     be decremented before it is incremented.

   - Fix a bug in the deadline scheduler vs. priority inheritance when a
     non-deadline task A has inherited the parameters of a deadline task
     B and then blocks on a non-deadline task C.

     The second inheritance step used the static deadline parameters of
     task A, which are usually 0, instead of further propagating task
     B's parameters. The zero initialized parameters trigger a bug in
     the deadline scheduler"

* tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Fix priority inheritance with multiple scheduling classes
  sched: Fix rq->nr_iowait ordering
  sched: Fix data-race in wakeup
  sched/fair: Fix overutilized update in enqueue_task_fair()

Pull perf fix from Thomas Gleixner:
 "A single fix for the x86 perf sysfs interfaces which used kobject
  attributes instead of device attributes and therefore making clang's
  control flow integrity checker upset"

* tag 'perf-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: fix sysfs type mismatches

Pull locking fix from Thomas Gleixner:
 "A single fix for lockdep which makes the recursion protection cover
  graph lock/unlock"

* tag 'locking-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Put graph lock/unlock under lock_recursion protection

Pull EFI fixes from Borislav Petkov:
 "Forwarded EFI fixes from Ard Biesheuvel:

   - fix memory leak in efivarfs driver

   - fix HYP mode issue in 32-bit ARM version of the EFI stub when built
     in Thumb2 mode

   - avoid leaking EFI pgd pages on allocation failure"

* tag 'efi-urgent-for-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/x86: Free efi_pgd with free_pages()
  efivarfs: fix memory leak in efivarfs_create()
  efi/arm: set HSCTLR Thumb2 bit correctly for HVC calls from HYP

Pull x86 fixes from Borislav Petkov:

 - An IOMMU VT-d build fix when CONFIG_PCI_ATS=n along with a revert of
   same because the proper one is going through the IOMMU tree (Thomas
   Gleixner)

 - An Intel microcode loader fix to save the correct microcode patch to
   apply during resume (Chen Yu)

 - A fix to not access user memory of other processes when dumping
   opcode bytes (Thomas Gleixner)

* tag 'x86_urgent_for_v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "iommu/vt-d: Take CONFIG_PCI_ATS into account"
  x86/dumpstack: Do not try to access user space code of other tasks
  x86/microcode/intel: Check patch signature before saving microcode for early loading
  iommu/vt-d: Take CONFIG_PCI_ATS into account

Merge misc fixes from Andrew Morton:
 "8 patches.

  Subsystems affected by this patch series: mm (madvise, pagemap,
  readahead, memcg, userfaultfd), kbuild, and vfs"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: fix madvise WILLNEED performance problem
  libfs: fix error cast of negative value in simple_attr_write()
  mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault()
  mm: memcg/slab: fix root memcg vmstats
  mm: fix readahead_page_batch for retry entries
  mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports
  compiler-clang: remove version check for BPF Tracing
  mm/madvise: fix memory leak from process_madvise

Pull staging and IIO fixes from Greg KH:
 "Here are some small Staging and IIO driver fixes for 5.10-rc5. They
  include:

   - IIO fixes for reported regressions and problems

   - new device ids for IIO drivers

   - new device id for rtl8723bs driver

   - staging ralink driver Kconfig dependency fix

   - staging mt7621-pci bus resource fix

  All of these have been in linux-next all week with no reported issues"

* tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode
  iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum
  docs: ABI: testing: iio: stm32: remove re-introduced unsupported ABI
  iio: light: fix kconfig dependency bug for VCNL4035
  iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is used
  iio/adc: ingenic: Fix battery VREF for JZ4770 SoC
  staging: rtl8723bs: Add 024c:0627 to the list of SDIO device-ids
  staging: ralink-gdma: fix kconfig dependency bug for DMA_RALINK
  staging: mt7621-pci: avoid to request pci bus resources
  iio: imu: st_lsm6dsx: set 10ms as min shub slave timeout
  counter/ti-eqep: Fix regmap max_register
  iio: adc: stm32-adc: fix a regression when using dma and irq
  iio: adc: mediatek: fix unset field
  iio: cros_ec: Use default frequencies when EC returns invalid information

Pull tty fixes from Greg KH:
 "Here are some small tty/serial fixes for 5.10-rc5 that resolve some
  reported issues:

   - speakup crash when telling the kernel to use a device that isn't
     really there

   - imx serial driver fixes for reported problems

   - ar933x_uart driver fix for probe error handling path

  All have been in linux-next for a while with no reported issues"

* tag 'tty-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: ar933x_uart: disable clk on error handling path in probe
  tty: serial: imx: keep console clocks always on
  speakup: Do not let the line discipline be used several times
  tty: serial: imx: fix potential deadlock

Pull ext4 fixes from Ted Ts'o:
 "A final set of miscellaneous bug fixes for ext4"

* tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix bogus warning in ext4_update_dx_flag()
  jbd2: fix kernel-doc markups
  ext4: drop fast_commit from /proc/mounts

When doing a lookup in a directory, the afs filesystem uses a bulk
status fetch to speculatively retrieve the statuses of up to 48 other
vnodes found in the same directory and it will then either update extant
inodes or create new ones - effectively doing 'lookup ahead'.

To avoid the possibility of deadlocking itself, however, the filesystem
doesn't lock all of those inodes; rather just the directory inode is
locked (by the VFS).

When the operation completes, afs_inode_init_from_status() or
afs_apply_status() is called, depending on whether the inode already
exists, to commit the new status.

A case exists, however, where the speculative status fetch operation may
straddle a modification operation on one of those vnodes.  What can then
happen is that the speculative bulk status RPC retrieves the old status,
and whilst that is happening, the modification happens - which returns
an updated status, then the modification status is committed, then we
attempt to commit the speculative status.

This results in something like the following being seen in dmesg:

	kAFS: vnode modified {100058:861} 8->9 YFS.InlineBulkStatus

showing that for vnode 861 on volume 100058, we saw YFS.InlineBulkStatus
say that the vnode had data version 8 when we'd already recorded version
9 due to a local modification.  This was causing the cache to be
invalidated for that vnode when it shouldn't have been.  If it happens
on a data file, this might lead to local changes being lost.

Fix this by ignoring speculative status updates if the data version
doesn't match the expected value.

Note that it is possible to get a DV regression if a volume gets
restored from a backup - but we should get a callback break in such a
case that should trigger a recheck anyway.  It might be worth checking
the volume creation time in the volsync info and, if a change is
observed in that (as would happen on a restore), invalidate all caches
associated with the volume.

Fixes: 5cf9dd55 ("afs: Prospectively look up extra files when doing a single lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The calculation of the end page index was incorrect, leading to a
regression of 70% when running stress-ng.

With this fix, we instead see a performance improvement of 3%.

Fixes: e6e88712 ("mm: optimise madvise WILLNEED")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Link: https://lkml.kernel.org/r/20201109134851.29692-1-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The attr->set() receive a value of u64, but simple_strtoll() is used for
doing the conversion.  It will lead to the error cast if user inputs a
negative value.

Use kstrtoull() instead of simple_strtoll() to convert a string got from
the user to an unsigned value.  The former will return '-EINVAL' if it
gets a negetive value, but the latter can't handle the situation
correctly.  Make 'val' unsigned long long as what kstrtoull() takes,
this will eliminate the compile warning on no 64-bit architectures.

Fixes: f7b88631 ("fs/libfs.c: fix simple_attr_write() on 32bit machines")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/1605341356-11872-1-git-send-email-yangyicong@hisilicon.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>