- 25 May, 2023 2 commits
-
-
Vitaly Rodionov authored
Add 4.8Mhz 9.6Mhz and 19.2MHz SCLK values for MCLK 12MHz and 12.288MHz requested by Intel. Signed-off-by:
Vitaly Rodionov <vitalyr@opensource.cirrus.com> Reviewed-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230524125236.57149-1-vitalyr@opensource.cirrus.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
Cirrus never intended to upstream dual licensed code, convert to GPL only. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Vlad Karpovich <vkarpovi@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230510092534.3919120-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
- 23 May, 2023 23 commits
-
-
Mark Brown authored
Merge series from David Rau <David.Rau.opensource@dm.renesas.com>: This patchset adds the support of DA7219 Jack insertion detection polarity selection. The first patch replaces the old txt binding with a new schema binding. The second patch adds `dlg,jack-ins-det-pty` property for Jack insertion detection polarity selection. The last patch adds the driver support for this topic. The series has been verified on the DA7219 development kit.
-
Mark Brown authored
Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>: This patch series provides better handling of cases where sending a data blob to FW results in a validation error. In this case we restore to the last good known value instead of keeping the data that firwmare rejected.
-
Mark Brown authored
Merge series from Trevor Wu <trevor.wu@mediatek.com>: The patch series includes a kselftest fix and changes for extending driver capability to support more use cases.
-
Anup Sharma authored
Convert the RT1016 Stereo Audio Amplifier bindings to DT schema Signed-off-by:
Anup Sharma <anupnewsmail@gmail.com> Link: https://lore.kernel.org/r/ZFUFAmBJXvkQAG7m@yogaSigned-off-by:
-
Mark Brown authored
Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>: Series removes the pm_runtime.h inclusion in files where APIs exported though pm_runtime.h are not used. In case of files that make use of pm.h which comes form pm_runtime.h added patch 2/2.
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: The following series will enable multicore support on MTL platforms similarly to other Intel platforms. The TGL patch is included to simplify the core_put implementation. Multicore support can be enabled by updated topologies, with current set of tplg files this series is not introducing any runtime change.
-
Trevor Wu authored
Originally, lineout playback source can only be DAC_3RD. Some SoC masters only support stereo MTKAIF outputs, so lineout path can't be used in such case. MTKAIF connections are as follows. MOSI0 -> DAC_L MOSI1 -> DAC_R MOSI2 -> DAC_3rd In the patch, lineout playback source can be chosen between DAC_L and DAC_3rd, so sound can be outputted via lineout even though SoC only supports stereo MTKAIF outputs. Signed-off-by:
Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20230508071532.21665-5-trevor.wu@mediatek.comSigned-off-by:
-
Trevor Wu authored
Add mtkaif gpio driving to increase signal strength and smt setting to prevent from overshooting. Signed-off-by:
-
Trevor Wu authored
kselftest tries to read/write the default value. The default register value of playback gain is 0x1F(mute), but max gain we specified is 0x12. The range of the control is 0x0~0x12 and mute(0x1F) is only used in the driver internally. To solve the problem, implement a new callback mt6359_get_playback_volsw to report user configured volume instead of the register value. In addition, update max of "Headset Volume" to 0x12, so it can match the maximum seen on latest data sheet. Signed-off-by:
-
Trevor Wu authored
There are three output data pins MISO0, MISO1 and MISO2 for mt6359. UL_SRC should be enabled when MISO0 or MISO1 is used, and UL_SRC_34 should be enabled when MISO2 is used. Signed-off-by:
-
Paul Olaru authored
The function is improved in the way that if the firmware returns a validation error on the newly sent bytes, then the kernel will automatically restore to the old bytes value for a given kcontrol. This way, if the firmware rejects a data blob then the kernel will also reject it, instead of saving it for the next suspend/resume cycle. The old behaviour is that the kernel would save it anyway and on next firmware boot it would apply the previously-rejected configuration, leading to errors during playback. Additionally, the function also saves previously validated configurations, so that if the firmware does end up rejecting a new bytes value the kernel can send an old, previously-valid configuration. Reviewed-by:
Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by:
Paul Olaru <paul.olaru@nxp.com> Signed-off-by:
-
Paul Olaru authored
The function is improved in the way that if the firmware returns a validation error on the newly sent bytes, then the kernel will automatically restore to the old bytes value for a given kcontrol. This way, if the firmware rejects a data blob then the kernel will also reject it, instead of saving it for the next suspend/resume cycle. The old behaviour is that the kernel would save it anyway and on next firmware boot it would apply the previously-rejected configuration, leading to errors during playback. Additionally, the function also saves previously validated configurations, so that if the firmware does end up rejecting a new bytes value the kernel can send an old, previously-valid configuration. Reviewed-by:
-
David Rau authored
Add support of selecting insertion detection polarity - Default polarity (Low) - Inverted polarity (High) Correct the keywords of parsing `dlg,jack-det-rate` bases on the new DT binding. Signed-off-by:
David Rau <David.Rau.opensource@dm.renesas.com> Link: https://lore.kernel.org/r/20230523161821.4260-4-David.Rau.opensource@dm.renesas.comSigned-off-by:
-
David Rau authored
Add `dlg,jack-ins-det-pty` property for Jack insertion detection polarity selection. Signed-off-by:
-
David Rau authored
- Convert Dialog DA7219 bindings to DT schema format. - Remove unused `dlg,ldo-lvl` property. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230523161821.4260-2-David.Rau.opensource@dm.renesas.comSigned-off-by:
-
Harshit Mogalapalli authored
hda_ipc4_pre_trigger() has two issues: 1. In the default case, we are returning without unlocking the mutex. 2. In case SNDRV_PCM_TRIGGER_STOP: when ret is less than zero it goes to out, unlocks but returns zero instead of a negative value. Fix this by changing the final return value to 'ret' instead of zero, and initialize 'ret' to zero in the start of the function. Fixes: 225f37b5 ("ASoC: SOF: ipc4-pcm: reset all pipelines during FE DAI hw_free") Signed-off-by:Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20230519064404.1659637-1-harshit.m.mogalapalli@oracle.comSigned-off-by:
-
Yang Li authored
The return value from the call to sof_ipc4_get_valid_bits() is int. However, the return value is being assigned to an unsigned int variable 'out_ref_valid_bits', so making it an int. Eliminate the following warning: ./sound/soc/sof/ipc4-topology.c:1537:6-24: WARNING: Unsigned expression compared with zero: out_ref_valid_bits < 0 Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4985Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reviewed-by:
-
Rander Wang authored
Firmware may do context saving before powering off primary core, so driver needs to send ipc msg by set_core_state. In IPC4 path, firmware needs to save current context to IMR before powering off primary core. Firmware does nothing for set_core_state message in IPC3 path. So IPC4 and IPC3 can share the same operation sequence. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
-
Rander Wang authored
In core_get case, driver can power up primary core and don't need to send ipc message to fw. Non-primary core should be powered up by fw with ipc message. In core_put case, driver should first send ipc message to fw to disable dsp core then power down primary core if the target is primary core. Signed-off-by:
-
Claudiu Beznea authored
Do not include pm_runtime.h header in files where runtime PM support is not implemented. Use pm.h instead as suspend to RAM specific implementation is available. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230517094903.2895238-3-claudiu.beznea@microchip.comSigned-off-by:
-
Claudiu Beznea authored
Do not include pm_runtime.h header in files where APIs exported by pm_runtime.h are not used. Signed-off-by:
-
David Lin authored
Adding pre-charge actions to make FEPGA power stable faster. It improve the recording quality at the beginning. Thus, it is also meaningfully to decrease the final adc delay time. Signed-off-by:
David Lin <CTLIN0@nuvoton.com> Link: https://lore.kernel.org/r/20230523083303.98436-1-CTLIN0@nuvoton.comSigned-off-by:
-
Venkata Prasad Potturu authored
Add pci revision id check for renoir and rembrandt platforms. Signed-off-by:
Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://lore.kernel.org/r/20230523072009.2379198-1-venkataprasad.potturu@amd.comSigned-off-by:
-
- 22 May, 2023 15 commits
-
-
Mark Brown authored
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>: Series of patches cleaning up error messages when loading topology. In few places instead of logging in place of failure message is logged in caller. Additionally there are places where both caller and failing function log error, leading to unnecessary logs. Clean all of the above up.
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: The MOD_INIT_INSTANCE message contains a CPC (Cycles Per Chunk/processing unit) parameter. This CPC value is used by the firmware to calculate the total cycles needed by the enabled module instances and based on this it can decide to set the frequency of the DSP core(s). The manifest section of the firmware image contains a module configuration section, where a per module table of configurations are listed with measured CPC values as triplet of IBS/IBS/CPC (Input/Output buffer size - corresponding to the selected audio format). In case the CPC value is 0 (missing from the manifest or the configuration cannot be matched) the firmware will force the DSP cores to maximum speed to avoid audio glitches due to starvation. In these cases the kernel will print a warning message to let the SOF developers know about the gap and provide information to correct it with a firmware update.
-
Christophe JAILLET authored
Use devm_clk_get_optional() instead of hand writing it. This saves some LoC and improves the semantic. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/f538c24ad7b1926478347a03b5b7f0432e195e3b.1684594691.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Christophe JAILLET authored
Use devm_clk_get_optional() instead of hand writing it. This saves some LoC and improves the semantic. Signed-off-by:
-
Christophe JAILLET authored
Use devm_clk_get_optional() instead of hand writing it. This saves some LoC and improves the semantic. Signed-off-by:
-
Christophe JAILLET authored
Use devm_clk_get_optional() instead of hand writing it. This saves some LoC and improves the semantic. Signed-off-by:
-
Christophe JAILLET authored
Use devm_clk_get_optional() instead of hand writing it. This saves some LoC and improves the semantic. Signed-off-by:
-
Christophe JAILLET authored
This driver does not use i2c, so there is no point in including <linux/i2c.h> Remove it. Signed-off-by:
-
Christophe JAILLET authored
Use devm_clk_get_optional() instead of hand writing it. This saves some LoC and improves the semantic. Signed-off-by:
-
Amadeusz Sławiński authored
soc_tplg_valid_header() logs all the failures in detail already. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by:
Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by:
-
Amadeusz Sławiński authored
soc_tplg_dapm_complete() logs all the failures in detail already. Signed-off-by:
-
Amadeusz Sławiński authored
Kernel coding guidelines recommend to not split string unnecessarily. While at it adapt the other print present in the function to 100 characters line limit. Signed-off-by:
-
Amadeusz Sławiński authored
soc_tplg_add_kcontrol() logs all the failures in detail already. Signed-off-by:
-
Amadeusz Sławiński authored
Simplify code by logging any errors in function that does the actual work instead of doing so in its callers. Signed-off-by:
-
Peter Ujfalusi authored
The manifest's firmware module configuration section contains the measured CPC values along with a matching IBS/OBS values. The CPC can be looked up by looking for a matching IBS/OBS entry. In case of multiple matches we will use the highest CPC value. If there is no mod_cfg or no CPC value (all 0) or no match was found then print warning message and use 0 as CPC value. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
-
