- 22 Jun, 2012 9 commits
-
-
Janne Kalliomäki authored
commit a6dc8c04 upstream. The variable io_size was unsigned int, which caused the wrong sector number to be calculated after aligning it. This then caused mount to fail with big volumes, as backup volume header information was searched from a wrong sector. Signed-off-by:
Janne Kalliomäki <janne@tuxera.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 4273f987 upstream. Commit 8b4c6a3a ("USB: option: Use generic USB wwan code") moved option port-data allocation to usb_wwan_startup but still cast the port data to the old struct... Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit b9c3aab3 upstream. Fix memory leak introduced by commit 383cedc3 ("USB: serial: full autosuspend support for the option driver") which allocates usb-serial data but never frees it. Signed-off-by:
-
说不得 authored
commit 0ef0be15 upstream. Signed-off-by:
gavin zhu <gavin.zhu@qq.com> Signed-off-by:
-
Andrew Bird authored
commit 42ca7da1 upstream. Later firmwares for this device now have proper subclass and protocol info so we can identify it nicely without needing to use the blacklist. I'm not removing the old 0xff matching as there may be devices in the field that still need that. Signed-off-by:
Andrew Bird <ajb@spheresystems.co.uk> Signed-off-by:
-
Bjørn Mork authored
commit 4cbbb039 upstream. Tested-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Trond Myklebust authored
commit b3b02ae5 upstream. If the call to svc_process_common() fails, then the request needs to be freed before we can exit bc_svc_process. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Andre Przywara authored
commit 5e626254 upstream. Xen PV kernels allow access to the APERF/MPERF registers to read the effective frequency. Access to the MSRs is however redirected to the currently scheduled physical CPU, making consecutive read and compares unreliable. In addition each rdmsr traps into the hypervisor. So to avoid bogus readouts and expensive traps, disable the kernel internal feature flag for APERF/MPERF if running under Xen. This will a) remove the aperfmperf flag from /proc/cpuinfo b) not mislead the power scheduler (arch/x86/kernel/cpu/sched.c) to use the feature to improve scheduling (by default disabled) c) not mislead the cpufreq driver to use the MSRs This does not cover userland programs which access the MSRs via the device file interface, but this will be addressed separately. Signed-off-by:
Andre Przywara <andre.przywara@amd.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Jaccon Bastiaansen authored
commit 350ab15b upstream. The statically defined I/O memory regions for the i.MX21 on chip peripherals and the on board I/O peripherals of the i.MX21ADS board overlap. This results in a kernel crash during startup. This is fixed by reducing the memory range for the on board I/O peripherals to the actually required range. Signed-off-by:
Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com> Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
- 17 Jun, 2012 21 commits
-
-
Greg Kroah-Hartman authored
-
Dave Hansen authored
commit c50ac050 and 4523e145 upstream. When called for anonymous (non-shared) mappings, hugetlb_reserve_pages() does a resv_map_alloc(). It depends on code in hugetlbfs's vm_ops->close() to release that allocation. However, in the mmap() failure path, we do a plain unmap_region() without the remove_vma() which actually calls vm_ops->close(). This is a decent fix. This leak could get reintroduced if new code (say, after hugetlb_reserve_pages() in hugetlbfs_file_mmap()) decides to return an error. But, I think it would have to unroll the reservation anyway. Christoph's test case: http://marc.info/?l=linux-mm&m=133728900729735 This patch applies to 3.4 and later. A version for earlier kernels is at https://lkml.org/lkml/2012/5/22/418. Signed-off-by:
Dave Hansen <dave@linux.vnet.ibm.com> Acked-by:
Mel Gorman <mel@csn.ul.ie> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reported-by:
Christoph Lameter <cl@linux.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
KyongHo authored
commit dbda591d upstream. The transfer of ->flags causes some of the static mapping virtual addresses to be prematurely freed (before the mapping is removed) because VM_LAZY_FREE gets "set" if tmp->flags has VM_IOREMAP set. This might cause subsequent vmalloc/ioremap calls to fail because it might allocate one of the freed virtual address ranges that aren't unmapped. va->flags has different types of flags from tmp->flags. If a region with VM_IOREMAP set is registered with vm_area_add_early(), it will be removed by __purge_vmap_area_lazy(). Fix vmalloc_init() to correctly initialize vmap_area for the given vm_struct. Also initialise va->vm. If it is not set, find_vm_area() for the early vm regions will always fail. Signed-off-by:
KyongHo Cho <pullip.cho@samsung.com> Cc: "Olav Haugan" <ohaugan@codeaurora.org> Signed-off-by:
-
Minchan Kim authored
commit db1aecaf upstream. vmap_area->private is void* but we don't use the field for various purpose but use only for vm_struct. So change it to a vm_struct* with naming to improve for readability and type checking. Signed-off-by:
Minchan Kim <minchan@kernel.org> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Dean Nelson authored
commit 31c15a2f upstream. Virtual Machines with emulated e1000 network adapter running on Parallels' server were seeing kernel panics due to the e1000 driver dereferencing an unexpected NULL pointer retrieved from buffer_info->skb. The problem has been addressed for the e1000e driver, but not for the e1000. Since the two drivers share similar code in the affected area, a port of the following e1000e driver commit solves the issue for the e1000 driver: commit 9ed318d5 Author: Tom Herbert <therbert@google.com> Date: Wed May 5 14:02:27 2010 +0000 e1000e: save skb counts in TX to avoid cache misses In e1000_tx_map, precompute number of segements and bytecounts which are derived from fields in skb; these are stored in buffer_info. When cleaning tx in e1000_clean_tx_irq use the values in the associated buffer_info for statistics counting, this eliminates cache misses on skb fields. Signed-off-by:
Dean Nelson <dnelson@redhat.com> Acked-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Roman Kagan <rkagan@parallels.com>
-
Pavel Shilovsky authored
commit 45c72cd7 upstream. Now we store attr->ino at inode->i_ino, return attr->ino at the first time and then return inode->i_ino if the attribute timeout isn't expired. That's wrong on 32 bit platforms because attr->ino is 64 bit and inode->i_ino is 32 bit in this case. Fix this by saving 64 bit ino in fuse_inode structure and returning it every time we call getattr. Also squash attr->ino into inode->i_ino explicitly. Signed-off-by:
Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Borislav Petkov authored
commit f227d430 upstream. Currently, the APIC LVT interrupt for error thresholding is implicitly enabled. However, there are models in the F15h range which do not enable it. Make the code machinery which sets up the APIC interrupt support an optional setting and add an ->interrupt_capable member to the bank representation mirroring that capability and enable the interrupt offset programming only if it is true. Simplify code and fixup comment style while at it. Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com> Signed-off-by:
Robert Richter <robert.richter@amd.com>
-
Emmanuel Grumbach authored
commit d6ee27eb upstream. When we remove a key, we put a key index which was supposed to tell the fw that we are actually removing the key. But instead the fw took that index as a valid index and messed up the SRAM of the device. This memory corruption on the device mangled the data of the SCD. The impact on the user is that SCD queue 2 got stuck after having removed keys. The message is the log that was printed is: Queue 2 stuck for 10000ms This doesn't seem to fix the higher queues that get stuck from time to time. Reviewed-by:
Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Dimitri Sivanich authored
commit a841f8ce upstream. It does not get processed because sched_domain_level_max is 0 at the time that setup_relax_domain_level() is run. Simply accept the value as it is, as we don't know the value of sched_domain_level_max until sched domain construction is completed. Fix sched_relax_domain_level in cpuset. The build_sched_domain() routine calls the set_domain_attribute() routine prior to setting the sd->level, however, the set_domain_attribute() routine relies on the sd->level to decide whether idle load balancing will be off/on. Signed-off-by:
Dimitri Sivanich <sivanich@sgi.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120605184436.GA15668@sgi.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Alan Cox authored
commit cfb46f43 upstream. Signed-off-by:
Alan Cox <alan@linux.intel.com> Acked-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Andre Przywara authored
commit 941a956b upstream. On high CPU load the accumulating values in the running_avg_cap register are very low (below 10), so averaging them too early leads to unnecessary poor output resolution. Since we pretend to output micro-Watt we better keep all the bits we have as long as possible. Signed-off-by:
Andreas Herrmann <andreas.herrmann3@amd.com> Acked-by:
Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
AnilKumar Ch authored
commit f461f27a upstream. Fix the issue of C_CAN interrupts getting disabled forever when canconfig utility is used multiple times. According to NAPI usage we disable all the hardware interrupts in ISR and re-enable them in poll(). Current implementation calls napi_enable() after hardware interrupts are enabled. If we get any interrupts between these two steps then we do not process those interrupts because napi is not enabled. Mostly these interrupts come because of STATUS is not 0x7 or ERROR interrupts. If napi_enable() happens before HW interrupts enabled then c_can_poll() function will be called eventual re-enabling. This patch moves the napi_enable() call before interrupts enabled. Signed-off-by:
AnilKumar Ch <anilkumar@ti.com> Acked-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
AnilKumar Ch authored
commit 148c87c8 upstream. This patch fixes an interrupt thrash issue with c_can driver. In c_can_isr() function interrupts are disabled and enabled only in c_can_poll() function. c_can_isr() & c_can_poll() both read the irqstatus flag. However, irqstatus is always read as 0 in c_can_poll() because all C_CAN interrupts are disabled in c_can_isr(). This causes all interrupts to be re-enabled in c_can_poll() which in turn causes another interrupt since the event is not really handled. This keeps happening causing a flood of interrupts. To fix this, read the irqstatus register in isr and use the same cached value in the poll function. Signed-off-by:
-
AnilKumar Ch authored
commit 617cacce upstream. This patch fixes an issue with transmit routine, which causes "can_put_echo_skb: BUG! echo_skb is occupied!" message when using "cansequence -p" on D_CAN controller. In c_can driver, while transmitting packets tx_echo flag holds the no of can frames put for transmission into the hardware. As the comment above c_can_do_tx() indicates, if we find any packet which is not transmitted then we should stop looking for more. In the current implementation this is not taken care of causing the said message. Also, fix the condition used to find if the packet is transmitted or not. Current code skips the first tx message object and ends up checking one extra invalid object. While at it, fix the comment on top of c_can_do_tx() to use the terminology "packet" instead of "package" since it is more standard. Signed-off-by:
-
Bjørn Mork authored
commit dd03cff2 upstream. Adding device IDs for Aircard 320U and two other devices found in the out-of-tree version of this driver. Cc: linux@sierrawireless.com Cc: Autif Khan <autif.mlist@gmail.com> Cc: Tom Cassidy <tomas.cassidy@gmail.com> Signed-off-by:
-
Johannes Berg authored
commit 463454b5 upstream. If a given interface combination doesn't contain a required interface type then we missed checking that and erroneously allowed it even though iface type wasn't there at all. Add a check that makes sure that all interface types are accounted for. Reported-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
-
Johannes Berg authored
commit 71ecfa18 upstream. When any interface goes down, it could be the one that we were doing a remain-on-channel with. We therefore need to cancel the remain-on-channel and flush the related work structs so they don't run after the interface has been removed or even destroyed. It's also possible in this case that an off-channel SKB was never transmitted, so free it if this is the case. Note that this can also happen if the driver finishes the off-channel period without ever starting it. Reported-by:
Nirav Shah <nirav.j2.shah@intel.com> Signed-off-by:
-
Mathias Krause authored
commit 7c8d5184 upstream. The 32 bit variant of cbc(aes) decrypt is using instructions requiring 128 bit aligned memory locations but fails to ensure this constraint in the code. Fix this by loading the data into intermediate registers with load unaligned instructions. This fixes reported general protection faults related to aesni. References: https://bugzilla.kernel.org/show_bug.cgi?id=43223Reported-by:
Daniel <garkein@mailueberfall.de> Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Steffen Rumler authored
commit 3c752965 upstream. This fixes a problem which can causes kernel oopses while loading a kernel module. According to the PowerPC EABI specification, GPR r11 is assigned the dedicated function to point to the previous stack frame. In the powerpc-specific kernel module loader, do_plt_call() (in arch/powerpc/kernel/module_32.c), GPR r11 is also used to generate trampoline code. This combination crashes the kernel, in the case where the compiler chooses to use a helper function for saving GPRs on entry, and the module loader has placed the .init.text section far away from the .text section, meaning that it has to generate a trampoline for functions in the .init.text section to call the GPR save helper. Because the trampoline trashes r11, references to the stack frame using r11 can cause an oops. The fix just uses GPR r12 instead of GPR r11 for generating the trampoline code. According to the statements from Freescale, this is safe from an EABI perspective. I've tested the fix for kernel 2.6.33 on MPC8541. Signed-off-by:
Steffen Rumler <steffen.rumler.ext@nsn.com> [paulus@samba.org: reworded the description] Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Roland Dreier authored
commit cbf8ae32 upstream. The memory the parameter __key points to is used as an iterator in btree_get_prev(), so if we save off a bkey() pointer in retry_key and then assign that to __key, we'll end up corrupting the btree internals when we do eg longcpy(__key, bkey(geo, node, i), geo->keylen); to return the key value. What we should do instead is use longcpy() to copy the key value that retry_key points to __key. This can cause a btree to get corrupted by seemingly read-only operations such as btree_for_each_safe. [akpm@linux-foundation.org: avoid the double longcpy()] Signed-off-by:
Roland Dreier <roland@purestorage.com> Acked-by:
Joern Engel <joern@logfs.org> Signed-off-by:
-
Eugeni Dodonov authored
commit 67384fe3 upstream. This seems to come on Gigabyte H55M-S2V and was discovered through the https://bugs.freedesktop.org/show_bug.cgi?id=50381 debugging. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50381Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
- 09 Jun, 2012 10 commits
-
-
Greg Kroah-Hartman authored
-
Tao Ma authored
commit b22b1f17 upstream. Commit 79906964 uses the ext4_{set,clear}_inode_flags() functions to change the i_flags automatically but fails to remove the error setting of i_flags. So we still have the problem of trashing state flags. Fix this by removing the assignment. Signed-off-by:
Tao Ma <boyu.mt@taobao.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Grazvydas Ignotas authored
commit f380f2c4 upstream. This driver disables interrupt just after requesting it and enables it later, after interface is up. However currently there is a time window between request_irq() and disable_irq() where if interrupt arrives, the driver oopses because it's not yet ready to process it. This can be reproduced by inserting the module, associating and removing the module multiple times. Eliminate this race by setting IRQF_NOAUTOEN flag before request_irq(). Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
-
Andy Whitcroft authored
commit c5971456 upstream. We only need to regenerate the sysfs files when the capacity units change, avoid the update otherwise. The origin of this issue is dates way back to 2.6.38: da8aeb92 (ACPI / Battery: Update information on info notification and resume) Signed-off-by:
Andy Whitcroft <apw@canonical.com> Tested-by:
Ralf Jung <post@ralfj.de> Signed-off-by:
-
Alex Deucher authored
commit a2bef8ce upstream. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Salman Qazi authored
commit 95599968 upstream. We can't have references held on pages in the s_buddy_cache while we are trying to truncate its pages and put the inode. All the pages must be gone before we reach clear_inode. This can only be gauranteed if we can prevent new users from grabbing references to s_buddy_cache's pages. The original bug can be reproduced and the bug fix can be verified by: while true; do mount -t ext4 /dev/ram0 /export/hda3/ram0; \ umount /export/hda3/ram0; done & while true; do cat /proc/fs/ext4/ram0/mb_groups; done Signed-off-by:
Salman Qazi <sqazi@google.com> Signed-off-by:
-
Salman Qazi authored
commit 02b78310 upstream. ext4_free_blocks fails to pair an ext4_mb_load_buddy with a matching ext4_mb_unload_buddy when it fails a memory allocation. Signed-off-by:
-
Theodore Ts'o authored
commit 79906964 upstream. In commit 353eb83c we removed i_state_flags with 64-bit longs, But when handling the EXT4_IOC_SETFLAGS ioctl, we replace i_flags directly, which trashes the state flags which are stored in the high 32-bits of i_flags on 64-bit platforms. So use the the ext4_{set,clear}_inode_flags() functions which use atomic bit manipulation functions instead. Reported-by:
-
Theodore Ts'o authored
commit f3fc0210 upstream. The ext4_error() function is missing a call to save_error_info(). Since this is the function which marks the file system as containing an error, this oversight (which was introduced in 2.6.36) is quite significant, and should be backported to older stable kernels with high urgency. Reported-by:
Ken Sumrall <ksumrall@google.com> Signed-off-by:
-
Eric Sandeen authored
commit 7e84b621 upstream. If ext4_setup_super() fails i.e. due to a too-high revision, the error is logged in dmesg but the fs is not mounted RO as indicated. Tested by: # mkfs.ext4 -r 4 /dev/sdb6 # mount /dev/sdb6 /mnt/test # dmesg | grep "too high" [164919.759248] EXT4-fs (sdb6): revision level too high, forcing read-only mode # grep sdb6 /proc/mounts /dev/sdb6 /mnt/test2 ext4 rw,seclabel,relatime,data=ordered 0 0 Reviewed-by:
Andreas Dilger <adilger@whamcloud.com> Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
