- 26 Jun, 2017 5 commits
-
-
Emmanuel Grumbach authored
commit 769dc04d upstream. When a peer sends a BAR frame with PM bit clear, we should not modify its PM state as madated by the spec in 802.11-20012 10.2.1.2. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe JAILLET authored
commit 5ebb6dd3 upstream. We should ensure that 'plane_no' is '< vb->num_planes' as done in 'vb2_plane_cookie' just a few lines below. Fixes: e23ccc0a ("[media] v4l: add videobuf2 Video for Linux 2 driver framework") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Tomasz Wilczyński authored
commit b8e11f7d upstream. Commit 27ed3cd2 (cpufreq: conservative: Fix the logic in frequency decrease checking) removed the 10 point substraction when comparing the load against down_threshold but did not remove the related limit for the down_threshold value. As a result, down_threshold lower than 11 is not allowed even though values from 1 to 10 do work correctly too. The comment ("cannot be lower than 11 otherwise freq will not fall") also does not apply after removing the substraction. For this reason, allow down_threshold to take any value from 1 to 99 and fix the related comment. Fixes: 27ed3cd2 (cpufreq: conservative: Fix the logic in frequency decrease checking) Signed-off-by:
Tomasz Wilczyński <twilczynski@naver.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Marc Kleine-Budde authored
commit 5cda3ee5 upstream. This patch adds the missing kfree() in gs_cmd_reset() to free the memory that is not used anymore after usb_control_msg(). Cc: Maximilian Schneider <max@schneidersoft.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Nicholas Bellinger authored
commit ba80aa90 upstream. This patch closes a long standing race in configfs between the creation of a new symlink in create_link(), while the symlink target's config_item is being concurrently removed via configfs_rmdir(). This can happen because the symlink target's reference is obtained by config_item_get() in create_link() before the CONFIGFS_USET_DROPPING bit set by configfs_detach_prep() during configfs_rmdir() shutdown is actually checked.. This originally manifested itself on ppc64 on v4.8.y under heavy load using ibmvscsi target ports with Novalink API: [ 7877.289863] rpadlpar_io: slot U8247.22L.212A91A-V1-C8 added [ 7879.893760] ------------[ cut here ]------------ [ 7879.893768] WARNING: CPU: 15 PID: 17585 at ./include/linux/kref.h:46 config_item_get+0x7c/0x90 [configfs] [ 7879.893811] CPU: 15 PID: 17585 Comm: targetcli Tainted: G O 4.8.17-customv2.22 #12 [ 7879.893812] task: c00000018a0d3400 task.stack: c0000001f3b40000 [ 7879.893813] NIP: d000000002c664ec LR: d000000002c60980 CTR: c000000000b70870 [ 7879.893814] REGS: c0000001f3b43810 TRAP: 0700 Tainted: G O (4.8.17-customv2.22) [ 7879.893815] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28222242 XER: 00000000 [ 7879.893820] CFAR: d000000002c664bc SOFTE: 1 GPR00: d000000002c60980 c0000001f3b43a90 d000000002c70908 c0000000fbc06820 GPR04: c0000001ef1bd900 0000000000000004 0000000000000001 0000000000000000 GPR08: 0000000000000000 0000000000000001 d000000002c69560 d000000002c66d80 GPR12: c000000000b70870 c00000000e798700 c0000001f3b43ca0 c0000001d4949d40 GPR16: c00000014637e1c0 0000000000000000 0000000000000000 c0000000f2392940 GPR20: c0000001f3b43b98 0000000000000041 0000000000600000 0000000000000000 GPR24: fffffffffffff000 0000000000000000 d000000002c60be0 c0000001f1dac490 GPR28: 0000000000000004 0000000000000000 c0000001ef1bd900 c0000000f2392940 [ 7879.893839] NIP [d000000002c664ec] config_item_get+0x7c/0x90 [configfs] [ 7879.893841] LR [d000000002c60980] check_perm+0x80/0x2e0 [configfs] [ 7879.893842] Call Trace: [ 7879.893844] [c0000001f3b43ac0] [d000000002c60980] check_perm+0x80/0x2e0 [configfs] [ 7879.893847] [c0000001f3b43b10] [c000000000329770] do_dentry_open+0x2c0/0x460 [ 7879.893849] [c0000001f3b43b70] [c000000000344480] path_openat+0x210/0x1490 [ 7879.893851] [c0000001f3b43c80] [c00000000034708c] do_filp_open+0xfc/0x170 [ 7879.893853] [c0000001f3b43db0] [c00000000032b5bc] do_sys_open+0x1cc/0x390 [ 7879.893856] [c0000001f3b43e30] [c000000000009584] system_call+0x38/0xec [ 7879.893856] Instruction dump: [ 7879.893858] 409d0014 38210030 e8010010 7c0803a6 4e800020 3d220000 e94981e0 892a0000 [ 7879.893861] 2f890000 409effe0 39200001 992a0000 <0fe00000> 4bffffd0 60000000 60000000 [ 7879.893866] ---[ end trace 14078f0b3b5ad0aa ]--- To close this race, go ahead and obtain the symlink's target config_item reference only after the existing CONFIGFS_USET_DROPPING check succeeds. This way, if configfs_rmdir() wins create_link() will return -ENONET, and if create_link() wins configfs_rmdir() will return -EBUSY. Reported-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Tested-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
- 17 Jun, 2017 35 commits
-
-
Greg Kroah-Hartman authored
-
Dan Carpenter authored
commit b5c32061 upstream. My static checker complains that if "lvl" is ULONG_MAX (this is 64 bit) then some of the strings will overflow. I don't know if that's possible but it seems simple enough to make the buffers slightly larger. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by:
-
Christian Borntraeger authored
commit c0e7bb38 upstream. For most cases a protection exception in the host (e.g. copy on write or dirty tracking) on the sie instruction will indicate an instruction length of 4. Turns out that there are some corner cases (e.g. runtime instrumentation) where this is not necessarily true and the ILC is unpredictable. Let's replace our 4 byte rewind_pad with 3 byte nops to prepare for all possible ILCs. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Max Filippov authored
commit e5c86679 upstream. Linux IRQ #0 is reserved for error reporting and may not be used. Increase NR_IRQS for one additional slot and increase irq_domain_add_legacy parameter first_irq value to 1, so that linux IRQ #0 is not associated with hardware IRQ #0 in legacy IRQ domains. Introduce macro XTENSA_PIC_LINUX_IRQ for static translation of xtensa PIC hardware IRQ # to linux IRQ #. Use this macro in XTFPGA platform data definitions. This fixes inability to use hardware IRQ #0 in configurations that don't use device tree and allows for non-identity mapping between linux IRQ # and hardware IRQ #. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit 4c887aa6 ] In tipc_conn_sendmsg(), we first queue the request to the outqueue followed by the connection state check. If the connection is not connected, we should not queue this message. In this commit, we reject the messages if the connection state is not CF_CONNECTED. Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Tested-by:
John Thompson <thompa.atl@gmail.com> Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 3ba4bcee ] We have seen proc_pid_readdir() invocations holding cpu for more than 50 ms. Add a cond_resched() to be gentle with other tasks. [akpm@linux-foundation.org: coding style fix] Link: http://lkml.kernel.org/r/1484238380.15816.42.camel@edumazet-glaptop3.roam.corp.google.comSigned-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Coly Li authored
[ Upstream commit f598f82e ] Commit 8a59f5d2 ("fs/romfs: return f_fsid for statfs(2)") generates a 64bit id from sb->s_bdev->bd_dev. This is only correct when romfs is defined with CONFIG_ROMFS_ON_BLOCK. If romfs is only defined with CONFIG_ROMFS_ON_MTD, sb->s_bdev is NULL, referencing sb->s_bdev->bd_dev will triger an oops. Richard Weinberger points out that when CONFIG_ROMFS_BACKED_BY_BOTH=y, both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD are defined. Therefore when calling huge_encode_dev() to generate a 64bit id, I use the follow order to choose parameter, - CONFIG_ROMFS_ON_BLOCK defined use sb->s_bdev->bd_dev - CONFIG_ROMFS_ON_BLOCK undefined and CONFIG_ROMFS_ON_MTD defined use sb->s_dev when, - both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD undefined leave id as 0 When CONFIG_ROMFS_ON_MTD is defined and sb->s_mtd is not NULL, sb->s_dev is set to a device ID generated by MTD_BLOCK_MAJOR and mtd index, otherwise sb->s_dev is 0. This is a try-best effort to generate a uniq file system ID, if all the above conditions are not meet, f_fsid of this romfs instance will be 0. Generally only one romfs can be built on single MTD block device, this method is enough to identify multiple romfs instances in a computer. Link: http://lkml.kernel.org/r/1482928596-115155-1-git-send-email-colyli@suse.deSigned-off-by:
Coly Li <colyli@suse.de> Reported-by:
Nong Li <nongli1031@gmail.com> Tested-by:
-
Xin Long authored
[ Upstream commit 6f29a130 ] sctp_addr_id2transport is a function for sockopt to look up assoc by address. As the address is from userspace, it can be a v4-mapped v6 address. But in sctp protocol stack, it always handles a v4-mapped v6 address as a v4 address. So it's necessary to convert it to a v4 address before looking up assoc by address. This patch is to fix it by calling sctp_verify_addr in which it can do this conversion before calling sctp_endpoint_lookup_assoc, just like what sctp_sendmsg and __sctp_connect do for the address from users. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
hayeswang authored
[ Upstream commit de9bf29d ] Stop the tx when the napi is disabled to prevent napi_schedule() is called. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
hayeswang authored
[ Upstream commit 2c561b2b ] The rtl8152_post_reset() should sumbit rx urb and interrupt transfer, otherwise the rx wouldn't work and the linking change couldn't be detected. Signed-off-by:
-
hayeswang authored
[ Upstream commit 248b213a ] Re-schedule napi after napi_complete() for tx, if it is necessay. In r8152_poll(), if the tx is completed after tx_bottom() and before napi_complete(), the scheduling of napi would be lost. Then, no one handles the next tx until the next napi_schedule() is called. Signed-off-by:
-
Chuck Lever authored
[ Upstream commit 406dab84 ] Lock sequence IDs are bumped in decode_lock by calling nfs_increment_seqid(). nfs_increment_sequid() does not use the seqid_mutating_err() function fixed in commit 059aa734 ("Don't increment lock sequence ID after NFS4ERR_MOVED"). Fixes: 059aa734 ("Don't increment lock sequence ID after ...") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Tested-by:
Xuan Qi <xuan.qi@oracle.com> Cc: stable@vger.kernel.org # v3.7+ Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Kazuya Mizuguchi authored
[ Upstream commit a47b70ea ] "swiotlb buffer is full" errors occur after repeated initialisation of a device - f.e. suspend/resume or ip link set up/down. This is because memory mapped using dma_map_single() in ravb_ring_format() and ravb_start_xmit() is not released. Resolve this problem by unmapping descriptors when freeing rings. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: reworked] Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Y.C. Chen authored
[ Upstream commit 6c971c09 ] The original ast driver will access some BMC configuration through P2A bridge that can be disabled since AST2300 and after. It will cause system hanged if P2A bridge is disabled. Here is the update to fix it. Signed-off-by:
Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Lyude Paul authored
[ Upstream commit cae9ff03 ] As it turns out, on cards that actually have CRTCs on them we're already calling drm_kms_helper_poll_enable(drm_dev) from nouveau_display_resume() before we call it in nouveau_pmops_runtime_resume(). This leads us to accidentally trying to enable polling twice, which results in a potential deadlock between the RPM locks and drm_dev->mode_config.mutex if we end up trying to enable polling the second time while output_poll_execute is running and holding the mode_config lock. As such, make sure we only enable polling in nouveau_pmops_runtime_resume() if we need to. This fixes hangs observed on the ThinkPad W541 Signed-off-by:
Lyude <lyude@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Kilian Singer <kilian.singer@quantumtechnology.info> Cc: Lukas Wunner <lukas@wunner.de> Cc: David Airlie <airlied@redhat.com> Signed-off-by:
-
Helge Deller authored
[ Upstream commit 83b5d1e3 ] Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit d1156b48 ] init_ring(), refill_rx_ring() and start_tx() don't check if mapping dma memory succeed. The patch adds the checks and failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Jisheng Zhang authored
[ Upstream commit e82d0258 ] This should be a typo. Signed-off-by:
Jisheng Zhang <jszhang@marvell.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Arseny Solokha authored
[ Upstream commit 4af0e5bb ] In spite of switching to paged allocation of Rx buffers, the driver still called dma_unmap_single() in the Rx queues tear-down path. The DMA region unmapping code in free_skb_rx_queue() basically predates the introduction of paged allocation to the driver. While being refactored, it apparently hasn't reflected the change in the DMA API usage by its counterpart gfar_new_page(). As a result, setting an interface to the DOWN state now yields the following: # ip link set eth2 down fsl-gianfar ffe24000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001ecd0000] [size=40] ------------[ cut here ]------------ WARNING: CPU: 1 PID: 189 at lib/dma-debug.c:1123 check_unmap+0x8e0/0xa28 CPU: 1 PID: 189 Comm: ip Tainted: G O 4.9.5 #1 task: dee73400 task.stack: dede2000 NIP: c02101e8 LR: c02101e8 CTR: c0260d74 REGS: dede3bb0 TRAP: 0700 Tainted: G O (4.9.5) MSR: 00021000 <CE,ME> CR: 28002222 XER: 00000000 GPR00: c02101e8 dede3c60 dee73400 000000b6 dfbd033c dfbd36c4 1f622000 dede2000 GPR08: 00000007 c05b1634 1f622000 00000000 22002484 100a9904 00000000 00000000 GPR16: 00000000 db4c849c 00000002 db4c8480 00000001 df142240 db4c84bc 00000000 GPR24: c0706148 c0700000 00029000 c07552e8 c07323b4 dede3cb8 c07605e0 db535540 NIP [c02101e8] check_unmap+0x8e0/0xa28 LR [c02101e8] check_unmap+0x8e0/0xa28 Call Trace: [dede3c60] [c02101e8] check_unmap+0x8e0/0xa28 (unreliable) [dede3cb0] [c02103b8] debug_dma_unmap_page+0x88/0x9c [dede3d30] [c02dffbc] free_skb_resources+0x2c4/0x404 [dede3d80] [c02e39b4] gfar_close+0x24/0xc8 [dede3da0] [c0361550] __dev_close_many+0xa0/0xf8 [dede3dd0] [c03616f0] __dev_close+0x2c/0x4c [dede3df0] [c036b1b8] __dev_change_flags+0xa0/0x174 [dede3e10] [c036b2ac] dev_change_flags+0x20/0x60 [dede3e30] [c03e130c] devinet_ioctl+0x540/0x824 [dede3e90] [c0347dcc] sock_ioctl+0x134/0x298 [dede3eb0] [c0111814] do_vfs_ioctl+0xac/0x854 [dede3f20] [c0111ffc] SyS_ioctl+0x40/0x74 [dede3f40] [c000f290] ret_from_syscall+0x0/0x3c --- interrupt: c01 at 0xff45da0 LR = 0xff45cd0 Instruction dump: 811d001c 7c66482e 813d0020 9061000c 807f000c 5463103a 7cc6182e 3c60c052 386309ac 90c10008 4cc63182 4826b845 <0fe00000> 4bfffa60 3c80c052 388402c4 ---[ end trace 695ae6d7ac1d0c47 ]--- Mapped at: [<c02e22a8>] gfar_alloc_rx_buffs+0x178/0x248 [<c02e3ef0>] startup_gfar+0x368/0x570 [<c036aeb4>] __dev_open+0xdc/0x150 [<c036b1b8>] __dev_change_flags+0xa0/0x174 [<c036b2ac>] dev_change_flags+0x20/0x60 Even though the issue was discovered in 4.9 kernel, the code in question is identical in the current net and net-next trees. Fixes: 75354148 ("gianfar: Add paged allocation and Rx S/G") Signed-off-by:
Arseny Solokha <asolokha@kb.kras.ru> Acked-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit d585df1c ] Some Hypervisors detach VFs from VMs by instantly causing an FLR event to be generated for a VF. In the mlx4 case, this will cause that VF's comm channel to be disabled before the VM has an opportunity to invoke the VF device's "shutdown" method. The result is that the VF driver on the VM will experience a command timeout during the shutdown process when the Hypervisor does not deliver a command-completion event to the VM. To avoid FW command timeouts on the VM when the driver's shutdown method is invoked, we detect the absence of the VF's comm channel at the very start of the shutdown process. If the comm-channel has already been disabled, we cause all FW commands during the device shutdown process to immediately return success (and thus avoid all command timeouts). Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Ben Skeggs authored
[ Upstream commit 96692b09 ] Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ben Skeggs authored
[ Upstream commit c966b627 ] Signed-off-by:
-
Dimitris Michailidis authored
[ Upstream commit 90427ef5 ] ip6_make_flowlabel() determines the flow label for IPv6 packets. It's supposed to be passed a flow label, which it returns as is if non-0 and in some other cases, otherwise it calculates a new value. The problem is callers often pass a flowi6.flowlabel, which may also contain traffic class bits. If the traffic class is non-0 ip6_make_flowlabel() mistakes the non-0 it gets as a flow label and returns the whole thing. Thus it can return a 'flow label' longer than 20b and the low 20b of that is typically 0 resulting in packets with 0 label. Moreover, different packets of a flow may be labeled differently. For a TCP flow with ECN non-payload and payload packets get different labels as exemplified by this pair of consecutive packets: (pure ACK) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0) .... .... .... 0001 1100 1110 0100 1001 = Flow Label: 0x1ce49 Payload Length: 32 Next Header: TCP (6) (payload) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0)) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) .... .... .... 0000 0000 0000 0000 0000 = Flow Label: 0x00000 Payload Length: 688 Next Header: TCP (6) This patch allows ip6_make_flowlabel() to be passed more than just a flow label and has it extract the part it really wants. This was simpler than modifying the callers. With this patch packets like the above become Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0) .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e Payload Length: 32 Next Header: TCP (6) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0)) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e Payload Length: 688 Next Header: TCP (6) Signed-off-by:
Dimitris Michailidis <dmichail@google.com> Acked-by:
-
David Howells authored
[ Upstream commit 62deb818 ] Initialise the stores_lock in fscache netfs cookies. Technically, it shouldn't be necessary, since the netfs cookie is an index and stores no data, but initialising it anyway adds insignificant overhead. Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Acked-by:
Steve Dickson <steved@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
David Howells authored
[ Upstream commit 6bdded59 ] fscache_disable_cookie() needs to clear the outstanding writes on the cookie it's disabling because they cannot be completed after. Without this, fscache_nfs_open_file() gets stuck because it disables the cookie when the file is opened for writing but can't uncache the pages till afterwards - otherwise there's a race between the open routine and anyone who already has it open R/O and is still reading from it. Looking in /proc/pid/stack of the offending process shows: [<ffffffffa0142883>] __fscache_wait_on_page_write+0x82/0x9b [fscache] [<ffffffffa014336e>] __fscache_uncache_all_inode_pages+0x91/0xe1 [fscache] [<ffffffffa01740fa>] nfs_fscache_open_file+0x59/0x9e [nfs] [<ffffffffa01ccf41>] nfs4_file_open+0x17f/0x1b8 [nfsv4] [<ffffffff8117350e>] do_dentry_open+0x16d/0x2b7 [<ffffffff811743ac>] vfs_open+0x5c/0x65 [<ffffffff81184185>] path_openat+0x785/0x8fb [<ffffffff81184343>] do_filp_open+0x48/0x9e [<ffffffff81174710>] do_sys_open+0x13b/0x1cb [<ffffffff811747b9>] SyS_open+0x19/0x1b [<ffffffff81001c44>] do_syscall_64+0x80/0x17a [<ffffffff8165c2da>] return_from_SYSCALL_64+0x0/0x7a [<ffffffffffffffff>] 0xffffffffffffffff Reported-by:
Jianhong Yin <jiyin@redhat.com> Signed-off-by:
-
David Howells authored
[ Upstream commit e26bfebd ] Under some circumstances, an fscache object can become queued such that it fscache_object_work_func() can be called once the object is in the OBJECT_DEAD state. This results in the kernel oopsing when it tries to invoke the handler for the state (which is hard coded to 0x2). The way this comes about is something like the following: (1) The object dispatcher is processing a work state for an object. This is done in workqueue context. (2) An out-of-band event comes in that isn't masked, causing the object to be queued, say EV_KILL. (3) The object dispatcher finishes processing the current work state on that object and then sees there's another event to process, so, without returning to the workqueue core, it processes that event too. It then follows the chain of events that initiates until we reach OBJECT_DEAD without going through a wait state (such as WAIT_FOR_CLEARANCE). At this point, object->events may be 0, object->event_mask will be 0 and oob_event_mask will be 0. (4) The object dispatcher returns to the workqueue processor, and in due course, this sees that the object's work item is still queued and invokes it again. (5) The current state is a work state (OBJECT_DEAD), so the dispatcher jumps to it - resulting in an OOPS. When I'm seeing this, the work state in (1) appears to have been either LOOK_UP_OBJECT or CREATE_OBJECT (object->oob_table is fscache_osm_lookup_oob). The window for (2) is very small: (A) object->event_mask is cleared whilst the event dispatch process is underway - though there's no memory barrier to force this to the top of the function. The window, therefore is from the time the object was selected by the workqueue processor and made requeueable to the time the mask was cleared. (B) fscache_raise_event() will only queue the object if it manages to set the event bit and the corresponding event_mask bit was set. The enqueuement is then deferred slightly whilst we get a ref on the object and get the per-CPU variable for workqueue congestion. This slight deferral slightly increases the probability by allowing extra time for the workqueue to make the item requeueable. Handle this by giving the dead state a processor function and checking the for the dead state address rather than seeing if the processor function is address 0x2. The dead state processor function can then set a flag to indicate that it's occurred and give a warning if it occurs more than once per object. If this race occurs, an oops similar to the following is seen (note the RIP value): BUG: unable to handle kernel NULL pointer dereference at 0000000000000002 IP: [<0000000000000002>] 0x1 PGD 0 Oops: 0010 [#1] SMP Modules linked in: ... CPU: 17 PID: 16077 Comm: kworker/u48:9 Not tainted 3.10.0-327.18.2.el7.x86_64 #1 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015 Workqueue: fscache_object fscache_object_work_func [fscache] task: ffff880302b63980 ti: ffff880717544000 task.ti: ffff880717544000 RIP: 0010:[<0000000000000002>] [<0000000000000002>] 0x1 RSP: 0018:ffff880717547df8 EFLAGS: 00010202 RAX: ffffffffa0368640 RBX: ffff880edf7a4480 RCX: dead000000200200 RDX: 0000000000000002 RSI: 00000000ffffffff RDI: ffff880edf7a4480 RBP: ffff880717547e18 R08: 0000000000000000 R09: dfc40a25cb3a4510 R10: dfc40a25cb3a4510 R11: 0000000000000400 R12: 0000000000000000 R13: ffff880edf7a4510 R14: ffff8817f6153400 R15: 0000000000000600 FS: 0000000000000000(0000) GS:ffff88181f420000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000002 CR3: 000000000194a000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffffa0363695 ffff880edf7a4510 ffff88093f16f900 ffff8817faa4ec00 ffff880717547e60 ffffffff8109d5db 00000000faa4ec18 0000000000000000 ffff8817faa4ec18 ffff88093f16f930 ffff880302b63980 ffff88093f16f900 Call Trace: [<ffffffffa0363695>] ? fscache_object_work_func+0xa5/0x200 [fscache] [<ffffffff8109d5db>] process_one_work+0x17b/0x470 [<ffffffff8109e4ac>] worker_thread+0x21c/0x400 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5acf>] kthread+0xcf/0xe0 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 [<ffffffff816460d8>] ret_from_fork+0x58/0x90 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 Signed-off-by:
Jeremy McNicoll <jeremymc@redhat.com> Tested-by:
Frank Sorenson <sorenson@redhat.com> Tested-by:
Benjamin Coddington <bcodding@redhat.com> Reviewed-by:
-
Stanislaw Gruszka authored
[ Upstream commit 3808d348 ] If ->get_regs_len() callback return 0, we allocate 0 bytes of memory, what print ugly warning in dmesg, which can be found further below. This happen on mac80211 devices where ieee80211_get_regs_len() just return 0 and driver only fills ethtool_regs structure and actually do not provide any dump. However I assume this can happen on other drivers i.e. when for some devices driver provide regs dump and for others do not. Hence preventing to to print warning in ethtool code seems to be reasonable. ethtool: vmalloc: allocation failure: 0 bytes, mode:0x24080c2(GFP_KERNEL|__GFP_HIGHMEM|__GFP_ZERO) <snip> Call Trace: [<ffffffff813bde47>] dump_stack+0x63/0x8c [<ffffffff811b0a1f>] warn_alloc+0x13f/0x170 [<ffffffff811f0476>] __vmalloc_node_range+0x1e6/0x2c0 [<ffffffff811f0874>] vzalloc+0x54/0x60 [<ffffffff8169986c>] dev_ethtool+0xb4c/0x1b30 [<ffffffff816adbb1>] dev_ioctl+0x181/0x520 [<ffffffff816714d2>] sock_do_ioctl+0x42/0x50 <snip> Mem-Info: active_anon:435809 inactive_anon:173951 isolated_anon:0 active_file:835822 inactive_file:196932 isolated_file:0 unevictable:0 dirty:8 writeback:0 unstable:0 slab_reclaimable:157732 slab_unreclaimable:10022 mapped:83042 shmem:306356 pagetables:9507 bounce:0 free:130041 free_pcp:1080 free_cma:0 Node 0 active_anon:1743236kB inactive_anon:695804kB active_file:3343288kB inactive_file:787728kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:332168kB dirty:32kB writeback:0kB shmem:0kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 1225424kB writeback_tmp:0kB unstable:0kB pages_scanned:0 all_unreclaimable? no Node 0 DMA free:15900kB min:136kB low:168kB high:200kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15984kB managed:15900kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 3187 7643 7643 Node 0 DMA32 free:419732kB min:28124kB low:35152kB high:42180kB active_anon:541180kB inactive_anon:248988kB active_file:1466388kB inactive_file:389632kB unevictable:0kB writepending:0kB present:3370280kB managed:3290932kB mlocked:0kB slab_reclaimable:217184kB slab_unreclaimable:4180kB kernel_stack:160kB pagetables:984kB bounce:0kB free_pcp:2236kB local_pcp:660kB free_cma:0kB lowmem_reserve[]: 0 0 4456 4456 Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Ard Biesheuvel authored
commit 29905b52 upstream. The function order_base_2() is defined (according to the comment block) as returning zero on input zero, but subsequently passes the input into roundup_pow_of_two(), which is explicitly undefined for input zero. This has gone unnoticed until now, but optimization passes in GCC 7 may produce constant folded function instances where a constant value of zero is passed into order_base_2(), resulting in link errors against the deliberately undefined '____ilog2_NaN'. So update order_base_2() to adhere to its own documented interface. [ See http://marc.info/?l=linux-kernel&m=147672952517795&w=2 and follow-up discussion for more background. The gcc "optimization pass" is really just broken, but now the GCC trunk problem seems to have escaped out of just specially built daily images, so we need to work around it in mainline. - Linus ] Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit 4f40c6e5 ] After much waiting I finally reproduced a KASAN issue, only to find my trace-buffer empty of useful information because it got spooled out :/ Make kasan_report honour the /proc/sys/kernel/traceoff_on_warning interface. Link: http://lkml.kernel.org/r/20170125164106.3514-1-aryabinin@virtuozzo.comSigned-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
David Lin authored
[ Upstream commit 35f860f9 ] Some versions of ARM GCC compiler such as Android toolchain throws in a '-fpic' flag by default. This causes the gcc-goto check script to fail although some config would have '-fno-pic' flag in the KBUILD_CFLAGS. This patch passes the KBUILD_CFLAGS to the check script so that the script does not rely on the default config from different compilers. Link: http://lkml.kernel.org/r/20170120234329.78868-1-dtwlin@google.comSigned-off-by:
David Lin <dtwlin@google.com> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Michal Marek <mmarek@suse.com> Signed-off-by:
-
Rafael J. Wysocki authored
[ Upstream commit a9306a63 ] The might_sleep_if() assertions in __pm_runtime_idle(), __pm_runtime_suspend() and __pm_runtime_resume() may generate false-positive warnings in some situations. For example, that happens if a nested pm_runtime_get_sync()/pm_runtime_put() pair is executed with disabled interrupts within an outer pm_runtime_get_sync()/pm_runtime_put() section for the same device. [Generally, pm_runtime_get_sync() may sleep, so it should not be called with disabled interrupts, but in this particular case the previous pm_runtime_get_sync() guarantees that the device will not be suspended, so the inner pm_runtime_get_sync() will return immediately after incrementing the device's usage counter.] That started to happen in the i915 driver in 4.10-rc, leading to the following splat: BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1032 in_atomic(): 1, irqs_disabled(): 0, pid: 1500, name: Xorg 1 lock held by Xorg/1500: #0: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0680c13>] i915_mutex_lock_interruptible+0x43/0x140 [i915] CPU: 0 PID: 1500 Comm: Xorg Not tainted Call Trace: dump_stack+0x85/0xc2 ___might_sleep+0x196/0x260 __might_sleep+0x53/0xb0 __pm_runtime_resume+0x7a/0x90 intel_runtime_pm_get+0x25/0x90 [i915] aliasing_gtt_bind_vma+0xaa/0xf0 [i915] i915_vma_bind+0xaf/0x1e0 [i915] i915_gem_execbuffer_relocate_entry+0x513/0x6f0 [i915] i915_gem_execbuffer_relocate_vma.isra.34+0x188/0x250 [i915] ? trace_hardirqs_on+0xd/0x10 ? i915_gem_execbuffer_reserve_vma.isra.31+0x152/0x1f0 [i915] ? i915_gem_execbuffer_reserve.isra.32+0x372/0x3a0 [i915] i915_gem_do_execbuffer.isra.38+0xa70/0x1a40 [i915] ? __might_fault+0x4e/0xb0 i915_gem_execbuffer2+0xc5/0x260 [i915] ? __might_fault+0x4e/0xb0 drm_ioctl+0x206/0x450 [drm] ? i915_gem_execbuffer+0x340/0x340 [i915] ? __fget+0x5/0x200 do_vfs_ioctl+0x91/0x6f0 ? __fget+0x111/0x200 ? __fget+0x5/0x200 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc6 even though the code triggering it is correct. Unfortunately, the might_sleep_if() assertions in question are too coarse-grained to cover such cases correctly, so make them a bit less sensitive in order to avoid the false-positives. Reported-and-tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit a088d1d7 ] When for instance a mobile Linux device roams from one access point to another with both APs sharing the same broadcast domain and a multicast snooping switch in between: 1) (c) <~~~> (AP1) <--[SSW]--> (AP2) 2) (AP1) <--[SSW]--> (AP2) <~~~> (c) Then currently IPv6 multicast packets will get lost for (c) until an MLD Querier sends its next query message. The packet loss occurs because upon roaming the Linux host so far stayed silent regarding MLD and the snooping switch will therefore be unaware of the multicast topology change for a while. This patch fixes this by always resending MLD reports when an interface change happens, for instance from NO-CARRIER to CARRIER state. Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
-
Ricardo Ribalda authored
[ Upstream commit f43128c7 ] Since '701dc207 ("i2c: piix4: Avoid race conditions with IMC")' we are using the SMBSLVCNT register at offset 0x8. We need to request it. Fixes: 701dc207 ("i2c: piix4: Avoid race conditions with IMC") Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Stefan Brüns authored
[ Upstream commit 5a70348e ] If a context is configured as dualstack ("IPv4v6"), the modem indicates the context activation with a slightly different indication message. The dual-stack indication omits the link_type (IPv4/v6) and adds additional address fields. IPv6 LSIs are identical to IPv4 LSIs, but have a different link type. Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Stefan Brüns authored
[ Upstream commit 764895d3 ] When the context is deactivated, the link_type is set to 0xff, which triggers a warning message, and results in a wrong link status, as the LSI is ignored. Signed-off-by:
-
