Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

The ath79_wdt driver uses a fixed memory address
currently. Although this is working with each
currently supported SoCs, but this may change
in the future. Additionally, the driver includes
platform specific header files in order to be
able to get the memory base of the watchdog
device.

The patch adds a memory resource to the platform
device, and converts the driver to get the base
address of the watchdog device from that.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Remove the static watchdog device variable and use
the 'platform_device_register_simple' helper to
allocate and register the device in one step.

This allows us to save a few bytes in the kernel image.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use the managed version of clk_get. This allows to
simplify the probe/remove functions a bit.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

In case of SP5100 or SB7x0 chipsets, the sp5100_tco module writes zero to
reserved bits. The module, however, shouldn't depend on specific default
value, and should perform a read-merge-write operation for the reserved
bits.

This patch makes the sp5100_tco module perform a read-merge-write operation
on all the chipset (sp5100, sb7x0, sb8x0 or later).

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43176Signed-off-by: Takahisa Tanaka <mc74hc00@gmail.com>
Tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@vger.kernel.org>

In case of SB800 or later chipset and re-programming MMIO address(*),
sp5100_tco module may read incorrect value of reserved bit, because the module
reads a value from an incorrect I/O address. However, this bug doesn't cause
a problem, because when re-programming MMIO address, by chance the module
writes zero (this is BIOS's default value) to the low three bits of register.
* In most cases, PC with SB8x0 or later chipset doesn't need to re-programming
  MMIO address, because such PC can enable AcpiMmio and can use 0xfed80b00 for
  watchdog register base address.

This patch fixes this bug.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43176Signed-off-by: Takahisa Tanaka <mc74hc00@gmail.com>
Tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@vger.kernel.org>

this module missed a remove callback in the platform ops.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

The device IDs are referenced by the driver and potentially
used beyond the init time, as kbuild correctly warns
about. Remove the __initconst annotation.

Without this patch, building at91_dt_defconfig results in:

WARNING: drivers/watchdog/built-in.o(.data+0x28): Section mismatch in reference from the variable at91wdt_driver to the (unknown reference) .init.rodata:(unknown)
The variable at91wdt_driver references
the (unknown reference) __initconst (unknown)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org

DA9055_WATCHDOG (introduced in v3.8) needs to select WATCHDOG_CORE so that it will
build cleanly.  Fixes these build errors:

da9055_wdt.c:(.text+0xe9bc7): undefined reference to `watchdog_unregister_device'
da9055_wdt.c:(.text+0xe9f4b): undefined reference to `watchdog_register_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
Cc: stable <stable@vger.kernel.org>

Pull LZO compression update from Markus Oberhumer:
 "Summary:
  ========

  Update the Linux kernel LZO compression and decompression code to the
  current upstream version which features significant performance
  improvements on modern machines.

  Some *synthetic* benchmarks:
  ============================

    x86_64 (Sandy Bridge), gcc-4.6 -O3, Silesia test corpus, 256 kB block-size:

                     compression speed   decompression speed

    LZO-2005    :         150 MB/sec          468 MB/sec
    LZO-2012    :         434 MB/sec         1210 MB/sec

    i386 (Sandy Bridge), gcc-4.6 -O3, Silesia test corpus, 256 kB block-size:

                     compression speed   decompression speed

    LZO-2005    :         143 MB/sec          409 MB/sec
    LZO-2012    :         372 MB/sec         1121 MB/sec

    armv7 (Cortex-A9), Linaro gcc-4.6 -O3, Silesia test corpus, 256 kB block-size:

                     compression speed   decompression speed

    LZO-2005    :          27 MB/sec           84 MB/sec
    LZO-2012    :          44 MB/sec          117 MB/sec
  **LZO-2013-UA :          47 MB/sec          167 MB/sec

  Legend:

    LZO-2005    : LZO version in current 3.8 kernel (which is based on
                     the LZO 2.02 release from 2005)
    LZO-2012    : updated LZO version available in linux-next
  **LZO-2013-UA : updated LZO version available in linux-next plus experimental
                     ARM Unaligned Access patch. This needs approval
                     from some ARM maintainer ist NOT YET INCLUDED."

Andrew Morton <akpm@linux-foundation.org> acks it and says:
 "There's a new LZ4 on the block which is even faster than the sped-up
  LZO, but various filesystems and things use LZO"

* tag 'lzo-update-signature-20130226' of git://github.com/markus-oberhumer/linux:
  crypto: testmgr - update LZO compression test vectors
  lib/lzo: Update LZO compression to current upstream version
  lib/lzo: Rename lzo1x_decompress.c to lzo1x_decompress_safe.c

Pull one kvm bugfix from Gleb Natapov.

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  x86/kvm: Fix pvclock vsyscall fixmap

Pull EDAC fixes and ghes-edac from Mauro Carvalho Chehab:
 "For:

   - Some fixes at edac drivers (i7core_edac, sb_edac, i3200_edac);
   - error injection support for i5100, when EDAC debug is enabled;
   - fix edac when it is loaded builtin (early init for the subsystem);
   - a "Firmware First" EDAC driver, allowing ghes to report errors via
     EDAC (ghes-edac).

  With regards to ghes-edac, this fixes a longstanding BZ at Red Hat
  that happens with Nehalem and Sandy Bridge CPUs: when both GHES and
  i7core_edac or sb_edac are running, the error reports are
  unpredictable, as both BIOS and OS race to access the registers.  With
  ghes-edac, the EDAC core will refuse to register any other concurrent
  memory error driver.

  This patchset moves the ghes struct definitions to a separate header
  file (include/acpi/ghes.h) and adds 3 hooks at apei/ghes.c to
  register/unregister and to report errors via ghes-edac.  Those changes
  were acked by ghes driver maintainer (Huang)."

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (30 commits)
  i5100_edac: convert to use simple_open()
  ghes_edac: fix to use list_for_each_entry_safe() when delete list items
  ghes_edac: Fix RAS tracing
  ghes_edac: Make it compliant with UEFI spec 2.3.1
  ghes_edac: Improve driver's printk messages
  ghes_edac: Don't credit the same memory dimm twice
  ghes_edac: do a better job of filling EDAC DIMM info
  ghes_edac: add support for reporting errors via EDAC
  ghes_edac: Register at EDAC core the BIOS report
  ghes: add the needed hooks for EDAC error report
  ghes: move structures/enum to a header file
  edac: add support for error type "Info"
  edac: add support for raw error reports
  edac: reduce stack pressure by using a pre-allocated buffer
  edac: lock module owner to avoid error report conflicts
  edac: remove proc_name from mci structure
  edac: add a new memory layer type
  edac: initialize the core earlier
  edac: better report error conditions in debug mode
  i5100_edac: Remove two checkpatch warnings
  ...

The new intel_powerclamp thermal cooling device driver was merged in
commit 2af78448 (Pull thermal management updates from Zhang Rui)
without any data conflicts.  But there was a more subtle conflict I
missed: the driver uses MAX_USER_RT_PRIO, but commit 8bd75c77
("sched/rt: Move rt specific bits into new header file") had moved that
define from <linux/sched.h> to <linux/sched/rt.h>.

Which caused this build failure:

  drivers/thermal/intel_powerclamp.c: In function ‘clamp_thread’:
  drivers/thermal/intel_powerclamp.c:360:21: error: ‘MAX_USER_RT_PRIO’ undeclared (first use in this function)
  drivers/thermal/intel_powerclamp.c:360:21: note: each undeclared identifier is reported only once for each function it appears in

And because I don't do a full "make allmodconfig" build after each pull,
I didn't notice until too late.  So now the fix is here, separately from
the merge commit.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM SoC mvebu platform changes from Olof Johansson:
 "This series contains changes for the Marvell EBU platforms (mvebu,
  orion, kirkwood, dove) that were not part of the first set of pull
  requests because of dependencies on the MMC tree, and being submitted
  a little late.

  Notable changes are:

   - More devices get moved out of board files into device tree
     descriptions.  The remaining devices listed in there have patches
     that will get sent for 3.10, after which we can remove a lot of the
     board files entirely.  We are doing the pinctrl and mmc drivers
     here, ethernet and PCI still remain.

   - SMP support for mvebu is improved with support for the local
     interrupt controller.

   - The Guruplug board file gets replaced with a DT description.

  Unfortunately, the dependency on the MMC tree turned out to be a much
  larger problem than expected, when the MMC maintainer rebased the
  patches in his tree that all of the patches in this branch are based
  on, which caused merge conflicts between the new and old versions of
  those patches.

  To work around the merge conflicts, this branch rebases all patches on
  top of the respective MMC patches that did get merged into 3.9.  The
  patches are all identical to the versions that were part of
  linux-next, but have a new commit date."

* tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (90 commits)
  arm: mvebu: enable the SD card slot on Armada 370 Reference Design board
  ARM: kirkwood: topkick: init mvsdio via DT
  ARM: kirkwood: nsa310: convert to pinctrl
  ARM: Kirkwood: topkick: Enable i2c bus.
  ARM: kirkwood: topkick: convert to pinctrl
  ARM: dove: convert serial DT nodes to clocks property
  arm: mvebu: Add SPI flash on Armada 370 DB board
  arm: mvebu: Add SPI flash on Armada XP-DB board
  arm: mvebu: Add SPI flash on Armada XP-GP board
  arm: mvebu: Add support for SPI controller in Armada 370/XP
  clocksource: update and move armada-370-xp-timer documentation to timer directory
  arm: mvebu: update DT to support local timers
  ARM: Dove: convert usb host controller to DT
  arm: mvebu: Enable USB controllers on Armada 370/XP boards
  arm: mvebu: Add support for USB host controllers in Armada 370/XP
  arm: mvebu: add button for OpenBlocks AX3-4
  ARM: Kirkwood: Convert NS2 to gpio-poweroff.
  ARM: Kirkwood: Convert NSA310 I2C to device tree
  ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver
  ARM: Kirkwood: Convert NSA310 to DT based regulators.
  ...

Pull ARM SoC late OMAP changes from Olof Johansson:
 "This branch contains changes for OMAP that came in late during the
  release staging, close to when the merge window opened.

  It contains, among other things:

   - OMAP PM fixes and some patches for audio device integration
   - OMAP clock fixes related to common clock conversion
   - A set of patches cleaning up WFI entry and blocking.
   - A set of fixes and IP block support for PM on TI AM33xx SoCs
     (Beaglebone, etc)
   - A set of smaller fixes and cleanups around AM33xx restart and
     revision detection, as well as removal of some dead code
     (CONFIG_32K_TIMER_HZ)"

* tag 'late-omap' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: omap2: include linux/errno.h in hwmod_reset
  ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default
  ARM: OMAP4: hwmod data: Enable AESS hwmod device
  ARM: OMAP4: hwmod data: Update AESS data with memory bank area
  ARM: OMAP4+: AESS: enable internal auto-gating during initial setup
  ASoC: TI AESS: add autogating-enable function, callable from architecture code
  ARM: OMAP2+: hwmod: add enable_preprogram hook
  ARM: OMAP4: clock data: Add missing clkdm association for dpll_usb
  ARM: OMAP2+: PM: Fix the dt return condition in pm_late_init()
  ARM: OMAP2: am33xx-hwmod: Fix "register offset NULL check" bug
  ARM: OMAP2+: AM33xx: hwmod: add missing HWMOD_NO_IDLEST flags
  ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem
  ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries
  ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3
  ARM: OMAP2+: AM33XX: Update the hardreset API
  ARM: OMAP2+: AM33XX: hwmod: Update the WKUP-M3 hwmod with reset status bit
  ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry
  ARM: OMAP2+: AM33XX: hwmod: Update TPTC0 hwmod with the right flags
  ARM: OMAP2+: AM33XX: hwmod: Register OCMC RAM hwmod
  ARM: OMAP2+: AM33XX: CM/PRM: Use __ASSEMBLER__ macros in header files
  ...

Pull ARM SoC i.MX DT changes from Olof Johansson:
 "This branch contains of devicetree changes for the Freescale i.MX
  platform.

  The base patch of the branch changes the format of the dts files to a
  slightly different format that makes it easier to do derivative board
  definitions, but it also introduces a lot of churn in the process
  since every line of the file is touched.

  On top of that are a handful of the regular changes; enabling more
  boards as DT-based instead of legacy board files (mx25pdk), enabling
  another driver for devicetree and thus adding bindings (onewire), etc.

  I'm not happy about the churn, and will likely not take it for other
  platforms in the future."

* tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: dts: add dtsi for imx6q and imx6dl
  ARM: dts: rename imx6q.dtsi to imx6qdl.dtsi
  ARM: dts: i.MX6: Add regulator delay support
  ARM: dts: Add device tree entry for onewire master on i.MX53
  ARM: i.MX53: Add clocks for i.mx53 onewire master.
  W1: Add device tree support to MXC onewire master.
  ARM: imx: enable imx6q-cpufreq support
  ARM: dts: Add apf51 basic support
  ARM i.MX6: change mxs usbphy clock usage
  ARM: dts: imx6q: Remove silicon version from SDMA firmware
  ARM i.MX53: dts: add oftree for MBa53 baseboard
  ARM i.MX53: add dts for the TQ tqma53 module
  ARM: dts: imx53: pinctrl update
  ARM i.MX51 babbage: Add keypad support
  ARM: dts: imx: Add imx51 KPP entry
  ARM: dts: imx25-karo-tx25: Put status entry in the end
  ARM: mx25pdk: Add device tree support
  ARM: dts: imx: use nodes label in board dts
  ARM: dts: add missing imx dtb targets
  ARM: boot: dts: Add an entry for imx27-pdk.dtb
  ...

Pull thermal management updates from Zhang Rui:
 "Highlights:

   - introduction of Dove thermal sensor driver.

   - introduction of Kirkwood thermal sensor driver.

   - introduction of intel_powerclamp thermal cooling device driver.

   - add interrupt and DT support for rcar thermal driver.

   - add thermal emulation support which allows platform thermal driver
     to do software/hardware emulation for thermal issues."

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits)
  thermal: rcar: remove __devinitconst
  thermal: return an error on failure to register thermal class
  Thermal: rename thermal governor Kconfig option to avoid generic naming
  thermal: exynos: Use the new thermal trend type for quick cooling action.
  Thermal: exynos: Add support for temperature falling interrupt.
  Thermal: Dove: Add Themal sensor support for Dove.
  thermal: Add support for the thermal sensor on Kirkwood SoCs
  thermal: rcar: add Device Tree support
  thermal: rcar: remove machine_power_off() from rcar_thermal_notify()
  thermal: rcar: add interrupt support
  thermal: rcar: add read/write functions for common/priv data
  thermal: rcar: multi channel support
  thermal: rcar: use mutex lock instead of spin lock
  thermal: rcar: enable CPCTL to use hardware TSC deciding
  thermal: rcar: use parenthesis on macro
  Thermal: fix a build warning when CONFIG_THERMAL_EMULATION cleared
  Thermal: fix a wrong comment
  thermal: sysfs: Add a new sysfs node emul_temp for thermal emulation
  PM: intel_powerclamp: off by one in start_power_clamp()
  thermal: exynos: Miscellaneous fixes to support falling threshold interrupt
  ...

Pull dma-buf framework updates from Sumit Semwal:
 "Refcounting implemented for vmap in core dma-buf"

* tag 'tag-for-linus-3.9' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf:
  CHROMIUM: dma-buf: restore args on failure of dma_buf_mmap
  dma-buf: implement vmap refcounting in the interface logic

Pull nfsd changes from J Bruce Fields:
 "Miscellaneous bugfixes, plus:

   - An overhaul of the DRC cache by Jeff Layton.  The main effect is
     just to make it larger.  This decreases the chances of intermittent
     errors especially in the UDP case.  But we'll need to watch for any
     reports of performance regressions.

   - Containerized nfsd: with some limitations, we now support
     per-container nfs-service, thanks to extensive work from Stanislav
     Kinsbursky over the last year."

Some notes about conflicts, since there were *two* non-data semantic
conflicts here:

 - idr_remove_all() had been added by a memory leak fix, but has since
   become deprecated since idr_destroy() does it for us now.

 - xs_local_connect() had been added by this branch to make AF_LOCAL
   connections be synchronous, but in the meantime Trond had changed the
   calling convention in order to avoid a RCU dereference.

There were a couple of more obvious actual source-level conflicts due to
the hlist traversal changes and one just due to code changes next to
each other, but those were trivial.

* 'for-3.9' of git://linux-nfs.org/~bfields/linux: (49 commits)
  SUNRPC: make AF_LOCAL connect synchronous
  nfsd: fix compiler warning about ambiguous types in nfsd_cache_csum
  svcrpc: fix rpc server shutdown races
  svcrpc: make svc_age_temp_xprts enqueue under sv_lock
  lockd: nlmclnt_reclaim(): avoid stack overflow
  nfsd: enable NFSv4 state in containers
  nfsd: disable usermode helper client tracker in container
  nfsd: use proper net while reading "exports" file
  nfsd: containerize NFSd filesystem
  nfsd: fix comments on nfsd_cache_lookup
  SUNRPC: move cache_detail->cache_request callback call to cache_read()
  SUNRPC: remove "cache_request" argument in sunrpc_cache_pipe_upcall() function
  SUNRPC: rework cache upcall logic
  SUNRPC: introduce cache_detail->cache_request callback
  NFS: simplify and clean cache library
  NFS: use SUNRPC cache creation and destruction helper for DNS cache
  nfsd4: free_stid can be static
  nfsd: keep a checksum of the first 256 bytes of request
  sunrpc: trim off trailing checksum before returning decrypted or integrity authenticated buffer
  sunrpc: fix comment in struct xdr_buf definition
  ...

Pull Ceph updates from Sage Weil:
 "A few groups of patches here.  Alex has been hard at work improving
  the RBD code, layout groundwork for understanding the new formats and
  doing layering.  Most of the infrastructure is now in place for the
  final bits that will come with the next window.

  There are a few changes to the data layout.  Jim Schutt's patch fixes
  some non-ideal CRUSH behavior, and a set of patches from me updates
  the client to speak a newer version of the protocol and implement an
  improved hashing strategy across storage nodes (when the server side
  supports it too).

  A pair of patches from Sam Lang fix the atomicity of open+create
  operations.  Several patches from Yan, Zheng fix various mds/client
  issues that turned up during multi-mds torture tests.

  A final set of patches expose file layouts via virtual xattrs, and
  allow the policies to be set on directories via xattrs as well
  (avoiding the awkward ioctl interface and providing a consistent
  interface for both kernel mount and ceph-fuse users)."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (143 commits)
  libceph: add support for HASHPSPOOL pool flag
  libceph: update osd request/reply encoding
  libceph: calculate placement based on the internal data types
  ceph: update support for PGID64, PGPOOL3, OSDENC protocol features
  ceph: update "ceph_features.h"
  libceph: decode into cpu-native ceph_pg type
  libceph: rename ceph_pg -> ceph_pg_v1
  rbd: pass length, not op for osd completions
  rbd: move rbd_osd_trivial_callback()
  libceph: use a do..while loop in con_work()
  libceph: use a flag to indicate a fault has occurred
  libceph: separate non-locked fault handling
  libceph: encapsulate connection backoff
  libceph: eliminate sparse warnings
  ceph: eliminate sparse warnings in fs code
  rbd: eliminate sparse warnings
  libceph: define connection flag helpers
  rbd: normalize dout() calls
  rbd: barriers are hard
  rbd: ignore zero-length requests
  ...

Pull writeback fixes from Wu Fengguang:
 "Two writeback fixes

   - fix negative (setpoint - dirty) in 32bit archs

   - use down_read_trylock() in writeback_inodes_sb(_nr)_if_idle()"

* tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  Negative (setpoint-dirty) in bdi_position_ratio()
  vfs: re-implement writeback_inodes_sb(_nr)_if_idle() and rename them

Pull block driver bits from Jens Axboe:
 "After the block IO core bits are in, please grab the driver updates
  from below as well.  It contains:

   - Fix ancient regression in dac960.  Nobody must be using that
     anymore...

   - Some good fixes from Guo Ghao for loop, fixing both potential
     oopses and deadlocks.

   - Improve mtip32xx for NUMA systems, by being a bit more clever in
     distributing work.

   - Add IBM RamSan 70/80 driver.  A second round of fixes for that is
     pending, that will come in through for-linus during the 3.9 cycle
     as per usual.

   - A few xen-blk{back,front} fixes from Konrad and Roger.

   - Other minor fixes and improvements."

* 'for-3.9/drivers' of git://git.kernel.dk/linux-block:
  loopdev: ignore negative offset when calculate loop device size
  loopdev: remove an user triggerable oops
  loopdev: move common code into loop_figure_size()
  loopdev: update block device size in loop_set_status()
  loopdev: fix a deadlock
  xen-blkback: use balloon pages for persistent grants
  xen-blkfront: drop the use of llist_for_each_entry_safe
  xen/blkback: Don't trust the handle from the frontend.
  xen-blkback: do not leak mode property
  block: IBM RamSan 70/80 driver fixes
  rsxx: add slab.h include to dma.c
  drivers/block/mtip32xx: add missing GENERIC_HARDIRQS dependency
  block: remove new __devinit/exit annotations on ramsam driver
  block: IBM RamSan 70/80 device driver
  drivers/block/mtip32xx/mtip32xx.c:1726:5: sparse: symbol 'mtip_send_trim' was not declared. Should it be static?
  drivers/block/mtip32xx/mtip32xx.c:4029:1: sparse: symbol 'mtip_workq_sdbf0' was not declared. Should it be static?
  dac960: return success instead of -ENOTTY
  mtip32xx: add trim support
  mtip32xx: Add workqueue and NUMA support
  block: delete super ancient PC-XT driver for 1980's hardware

Pull block IO core bits from Jens Axboe:
 "Below are the core block IO bits for 3.9.  It was delayed a few days
  since my workstation kept crashing every 2-8h after pulling it into
  current -git, but turns out it is a bug in the new pstate code (divide
  by zero, will report separately).  In any case, it contains:

   - The big cfq/blkcg update from Tejun and and Vivek.

   - Additional block and writeback tracepoints from Tejun.

   - Improvement of the should sort (based on queues) logic in the plug
     flushing.

   - _io() variants of the wait_for_completion() interface, using
     io_schedule() instead of schedule() to contribute to io wait
     properly.

   - Various little fixes.

  You'll get two trivial merge conflicts, which should be easy enough to
  fix up"

Fix up the trivial conflicts due to hlist traversal cleanups (commit
b67bfe0d: "hlist: drop the node parameter from iterators").

* 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits)
  block: remove redundant check to bd_openers()
  block: use i_size_write() in bd_set_size()
  cfq: fix lock imbalance with failed allocations
  drivers/block/swim3.c: fix null pointer dereference
  block: don't select PERCPU_RWSEM
  block: account iowait time when waiting for completion of IO request
  sched: add wait_for_completion_io[_timeout]
  writeback: add more tracepoints
  block: add block_{touch|dirty}_buffer tracepoint
  buffer: make touch_buffer() an exported function
  block: add @req to bio_{front|back}_merge tracepoints
  block: add missing block_bio_complete() tracepoint
  block: Remove should_sort judgement when flush blk_plug
  block,elevator: use new hashtable implementation
  cfq-iosched: add hierarchical cfq_group statistics
  cfq-iosched: collect stats from dead cfqgs
  cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats()
  blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock
  block: RCU free request_queue
  blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge()
  ...

Pull first round of SCSI updates from James Bottomley:
 "The patch set is mostly driver updates (bnx2fc, ipr, lpfc, qla4) and a
  few bug fixes"

Pull delayed because google hates James, and sneakily considers his pull
requests spam. Why, google, why?

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (60 commits)
  [SCSI] aacraid: 1024 max outstanding command support for Series 7 and above
  [SCSI] bnx2fc: adjust duplicate test
  [SCSI] qla4xxx: Update driver version to 5.03.00-k4
  [SCSI] qla4xxx: Fix return code for qla4xxx_session_get_param.
  [SCSI] qla4xxx: wait for boot target login response during probe.
  [SCSI] qla4xxx: Added support for force firmware dump
  [SCSI] qla4xxx: Re-register IRQ handler while retrying initialize of adapter
  [SCSI] qla4xxx: Throttle active IOCBs to firmware limits
  [SCSI] qla4xxx: Remove unnecessary code from qla4xxx_init_local_data
  [SCSI] qla4xxx: Quiesce driver activities while loopback
  [SCSI] qla4xxx: Rename MBOX_ASTS_IDC_NOTIFY to MBOX_ASTS_IDC_REQUEST_NOTIFICATION
  [SCSI] qla4xxx: Add spurious interrupt messages under debug level 2
  [SCSI] cxgb4i: Remove the scsi host device when removing device
  [SCSI] bfa: fix strncpy() limiter in bfad_start_ops()
  [SCSI] qla4xxx: Update driver version to 5.03.00-k3
  [SCSI] qla4xxx: Correct the validation to check in get_sys_info mailbox
  [SCSI] qla4xxx: Pass correct function param to qla4_8xxx_rd_direct
  [SCSI] lpfc 8.3.37: Update lpfc version for 8.3.37 driver release
  [SCSI] lpfc 8.3.37: Fixed infinite loop in lpfc_sli4_fcf_rr_next_index_get.
  [SCSI] lpfc 8.3.37: Fixed crash due to SLI Port invalid resource count
  ...

The Armada 370 Reference Design board has one SD card slot, directly
connected to the SDIO IP of the SoC, so we enable this IP. there are no
GPIOs for card-detect and write-protect so we do not specify any.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Andrew Lunn <andrew@lunn.ch>

Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Add a DT node for I2C and pinctrl hog for the pins. There appears to
be an i2c bus on topkick with a device on it:

i2cdetect 0
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0.
I will probe address range 0x03-0x77.
Continue? [Y/n] y
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- 64 -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Signed-off-by: Jason Cooper <jason@lakedaemon.net>

of_serial now has support for using clocks property and we have
a DT clock provider. This patch replaces the hard coded clock-frequency
property with a clocks phandle to tclk.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This patch add support for the SPI flash MX25l25635E which is present
on the Armada 370 DB board. This flash stores the bootloader and its
environment.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This patch add support for the SPI flash M25P64 which is present on
the Armada XP DB board. This flash stores the bootloader and its
environment.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This patch adds an SPI master device node for Armada XP-GP board.
This master node is an SPI flash controller 'n25q128a13'.

Since there is no 'partitions' node declared, one full sized
partition named as the device will be created.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Lior Amsalem <alior@marvell.com>
Tested-by: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

The Armada 370 and Armada XP SoC has an SPI controller.
This patch adds support for this controller in Armada 370
and Armada XP SoC common device tree files.

Note that the Armada XP SPI register length is 0x50 bytes,
while Armada 370 SPI register length is 0x28 bytes,
so we choose the smaller of the two.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Lior Amsalem <alior@marvell.com>
Acked-by: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Timer driver for Armada 370 and Armada XP have gained local timers
support. So it needs new resources information regarding the IRQs
and the registers.

Also move the documentation in the new and more accurate directory
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Now that the time-armada-370-xp support local timers, updated the
device tree to take it into account.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

With DT support for orion-ehci also convert Dove to it and
remove the legacy calls and clock aliases.

This patch is based on "ARM: Dove: split legacy and DT setup"
applied to mvebu/boards recently.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This patch activates every USB port provided by each SoC.
Except for Armada XP Openblocks AX3-4 board,
where we enable only the first two USB ports
until we have more information on the third one usage.

Cc: Lior Amsalem <alior@marvell.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

The Armada 370 and Armada XP SoC has an Orion EHCI USB controller.
This patch adds support for this controller in Armada 370
and Armada XP SoC common device tree files.

Cc: Lior Amsalem <alior@marvell.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

The OpenBlocks AX3-4 board has one software-controlled button on the
front side, labeled "INIT", so we add minimal support for this button
in the kernel.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>