- 26 Jan, 2023 11 commits
-
-
Jan Kara authored
Convert udf_symlink_filler() to use udf_bread() instead of mapping and reading buffer head manually. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Currently udf_symlink_filler() called udf_block_map() even on files which have data stored inside the ICB. This is invalid as we cannot map blocks for such files (although so far the error got silently ignored). The call happened because we could not call block mapping function once we've acquired i_data_sem and determined whether the file has data stored in the ICB. For symlinks the situation is luckily simple as they get never modified so file type never changes once it is set. Hence we can check the file type even without i_data_sem. Just drop the i_data_sem locking and move block mapping to where it is needed. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Use udf_bread() instead of mapping and loadign buffer head manually in udf_load_vat(). Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Use udf_bread() instead of mapping and reading buffer head manually in udf_get_pblock_virt15(). Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Create new block mapping function udf_map_block() that takes new udf_map_rq structure describing mapping request. We will convert other places to use this function for block mapping. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
inode_getblk() sets goal block for the next allocation to the currently allocated block. This is obviously one less than what the goal block should be which we fixup in udf_get_block(). Just set the right goal block directly in inode_getblk(). Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
UDF was supporting a strange mode where the media was containing 7 blocks of unknown data for every 32 blocks of the filesystem. I have yet to see the media that would need such conversion (maybe it comes from packet writing times) and the conversions have been inconsistent in the code. In particular any write will write to a wrong block and corrupt the media. This is an indication and no user actually needs this so let's just drop the support instead of trying to fix it. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
When detecting last recorded block and from it derived anchor block position, we were mixing unsigned long, u32, and sector_t types. Since udf supports only 32-bit block numbers this is harmless but sometimes makes things awkward. Convert everything to udf_pblk_t and also handle the situation when block device size would not fit into udf_pblk_t. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
When directory's last extent has more that one block and its length is not multiple of a block side, the code wrongly decided to move to the next extent instead of processing the last partial block. This led to directory corruption. Fix the rounding issue. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
When we spot directory corruption when trying to load next directory extent, we didn't propagate the error up properly, leading to possibly indefinite looping on corrupted directories. Fix the problem by propagating the error properly. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Padding of name in the directory entry needs to be zeroed out. Fix it. Signed-off-by: Jan Kara <jack@suse.cz>
-
- 16 Jan, 2023 1 commit
-
-
Christoph Hellwig authored
Propagate errors from ext2_prepare_chunk to the callers and handle them there. While touching the prototype also turn update_times into a bool from the current int used as bool. [JK: fixed up error recovery path in ext2_rename()] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20230116085205.2342975-1-hch@lst.de>
-
- 09 Jan, 2023 28 commits
-
-
Colin Ian King authored
The variable netype is assigned a value that is never read, the assignment is redundant the variable can be removed. Message-Id: <20230105134925.45599-1-colin.i.king@gmail.com> Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
When UDF filesystem is corrupted, hidden system inodes can be linked into directory hierarchy which is an avenue for further serious corruption of the filesystem and kernel confusion as noticed by syzbot fuzzed images. Refuse to access system inodes linked into directory hierarchy and vice versa. CC: stable@vger.kernel.org Reported-by: syzbot+38695a20b8addcbc1084@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
System files in UDF filesystem have link count 0. To not confuse VFS we fudge the link count to be 1 when reading such inodes however we forget to restore the link count of 0 when writing such inodes. Fix that. CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
When write to inline file fails (or happens only partly), we still updated length of inline data as if the whole write succeeded. Fix the update of length of inline data to happen only if the write succeeds. Reported-by: syzbot+0937935b993956ba28ab@syzkaller.appspotmail.com CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
-
Colin Ian King authored
There is a spelling mistake in a udf_err message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20221230231452.5821-1-colin.i.king@gmail.com>
-
Fabio M. De Francesco authored
kmap_atomic() is deprecated in favor of kmap_local_page(). Therefore, replace kmap_atomic() with kmap_local_page(). kmap_atomic() is implemented like a kmap_local_page() which also disables page-faults and preemption (the latter only for !PREEMPT_RT kernels). However, the code within the mapping and un-mapping in ext2_make_empty() does not depend on the above-mentioned side effects. Therefore, a mere replacement of the old API with the new one is all it is required (i.e., there is no need to explicitly add any calls to pagefault_disable() and/or preempt_disable()). Suggested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20221231174205.8492-1-fmdefrancesco@gmail.com>
-
Jan Kara authored
When rounding the last extent to blocksize in inode_getblk() we forgot to update also i_lenExtents to match the new extent length. This inconsistency can later confuse some assertion checks. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
When expanding file for a write into a hole, we were not updating total length of inode's extents properly. Move the update of i_lenExtents into udf_do_extend_file() so that both expanding of file by truncate and expanding of file by writing beyond EOF properly update the length of extents. As a bonus, we also correctly update the length of extents when only part of extents can be written. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Currently we allocate name buffer in directory iterators (struct udf_fileident_iter) on stack. These structures are relatively large (some 360 bytes on 64-bit architectures). For udf_rename() which needs to keep three of these structures in parallel the stack usage becomes rather heavy - 1536 bytes in total. Allocate the name buffer in the iterator from heap to avoid excessive stack usage. Link: https://lore.kernel.org/all/202212200558.lK9x1KW0-lkp@intel.comReported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
When adding extent to a file fails, so far we've silently squelshed the error. Make sure to propagate it up properly. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
When adding extent describing symlink data fails, make sure to handle the error properly, propagate it up and free the already allocated block. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
When there is an error when adding extent to the directory to expand it, make sure to propagate the error up properly. This is not expected to happen currently but let's make the code more futureproof. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
When merging very long extents we try to push as much length as possible to the first extent. However this is unnecessarily complicated and not really worth the trouble. Furthermore there was a bug in the logic resulting in corrupting extents in the file as syzbot reproducer shows. So just don't bother with the merging of extents that are too long together. CC: stable@vger.kernel.org Reported-by: syzbot+60f291a24acecb3c2bd5@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
When a file expansion failed because we didn't have enough space for indirect extents make sure we truncate extents created so far so that we don't leave extents beyond EOF. CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Remove old directory iteration code that is now unused. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Convert udf_rename() to use new directory iteration code. Reported-by: syzbot+0eaad3590d65102b9391@syzkaller.appspotmail.com Reported-by: syzbot+b7fc73213bc2361ab650@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Convert udf_link() to use new directory iteration code for adding entry into the directory. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Convert udf_mkdir() to new directory iteration code. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Convert udf_add_nondir() to new directory iteration code. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Implement function udf_fiiter_add_entry() adding new directory entries using new directory iteration code. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Convert udf_unlink() to new directory iteration code. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Convert udf_rmdir() to use new directory iteration code. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Provide function udf_fiiter_delete_entry() to mark directory entry as deleted using new directory iteration code. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Convert empty_dir() to new directory iteration code. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Convert udf_get_parent() to use udf_fiiter_find_entry(). Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Convert udf_lookup() to use udf_fiiter_find_entry() for looking up directory entries. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Implement searching for directory entry - udf_fiiter_find_entry() - using new directory iteration code. Reported-by: syzbot+69c9fdccc6dd08961d34@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
There is just one caller of udf_expand_dir_adinicb(). Move the function to its caller into namei.c as it is more about directory handling than anything else anyway. Signed-off-by: Jan Kara <jack@suse.cz>
-