When MADT is parsed, print MULTIPROC_WAKEUP information:

  ACPI: MP Wakeup (version[1], mailbox[0x7fffd000], reset[0x7fffe068])

This debug information will be very helpful during bringup.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-20-kirill.shutemov@linux.intel.com

MADT Multiprocessor Wakeup structure version 1 brings support for CPU offlining:
BIOS provides a reset vector where the CPU has to jump to for offlining itself.
The new TEST mailbox command can be used to test whether the CPU offlined itself
which means the BIOS has control over the CPU and can online it again via the
ACPI MADT wakeup method.

Add CPU offlining support for the ACPI MADT wakeup method by implementing custom
cpu_die(), play_dead() and stop_this_cpu() SMP operations.

CPU offlining makes it possible to hand over secondary CPUs over kexec, not
limiting the second kernel to a single CPU.

The change conforms to the approved ACPI spec change proposal. See the Link.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kai Huang <kai.huang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/all/13356251.uLZWGnKmhe@kreacher
Link: https://lore.kernel.org/r/20240614095904.1345461-19-kirill.shutemov@linux.intel.com

The helper complements kernel_ident_mapping_init(): it frees the identity
mapping that was previously allocated. It will be used in the error path to free
a partially allocated mapping or if the mapping is no longer needed.

The caller provides a struct x86_mapping_info with the free_pgd_page() callback
hooked up and the pgd_t to free.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Kai Huang <kai.huang@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-18-kirill.shutemov@linux.intel.com

If the helper is defined, it is called instead of halt() to stop the CPU at the
end of stop_this_cpu() and on crash CPU shutdown.

ACPI MADT will use it to hand over the CPU to BIOS in order to be able to wake
it up again after kexec.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kai Huang <kai.huang@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-17-kirill.shutemov@linux.intel.com

ACPI MADT doesn't allow to offline a CPU after it was onlined. This limits
kexec: the second kernel won't be able to use more than one CPU.

To prevent a kexec kernel from onlining secondary CPUs, invalidate the mailbox
address in the ACPI MADT wakeup structure which prevents a kexec kernel to use
it.

This is safe as the booting kernel has the mailbox address cached already and
acpi_wakeup_cpu() uses the cached value to bring up the secondary CPUs.

Note: This is a Linux specific convention and not covered by the ACPI
specification.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-16-kirill.shutemov@linux.intel.com

In order to support MADT wakeup structure version 1, provide more appropriate
names for the fields in the structure.

Rename 'mailbox_version' to 'version'. This field signifies the version of the
structure and the related protocols, rather than the version of the mailbox.
This field has not been utilized in the code thus far.

Rename 'base_address' to 'mailbox_address' to clarify the kind of address it
represents. In version 1, the structure includes the reset vector address. Clear
and distinct naming helps to prevent any confusion.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-15-kirill.shutemov@linux.intel.com

During crashkernel boot only pre-allocated crash memory is presented as
E820_TYPE_RAM.

This can cause page table entries mapping unaccepted memory table to be zapped
during phys_pte_init(), phys_pmd_init(), phys_pud_init() and phys_p4d_init() as
SNP/TDX guest use E820_TYPE_ACPI to store the unaccepted memory table and pass
it between the kernels on kexec/kdump.

E820_TYPE_ACPI covers not only ACPI data, but also EFI tables and might be
required by kernel to function properly.

The problem was discovered during debugging kdump for SNP guest. The unaccepted
memory table stored with E820_TYPE_ACPI and passed between the kernels on kdump
was getting zapped as the PMD entry mapping this is above the E820_TYPE_RAM
range for the reserved crashkernel memory.
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240614095904.1345461-14-kirill.shutemov@linux.intel.com

e820__end_of_ram_pfn() is used to calculate max_pfn which, among other things,
guides where direct mapping ends. Any memory above max_pfn is not going to be
present in the direct mapping.

e820__end_of_ram_pfn() finds the end of the RAM based on the highest
E820_TYPE_RAM range. But it doesn't includes E820_TYPE_ACPI ranges into
calculation.

Despite the name, E820_TYPE_ACPI covers not only ACPI data, but also EFI tables
and might be required by kernel to function properly.

Usually the problem is hidden because there is some E820_TYPE_RAM memory above
E820_TYPE_ACPI. But crashkernel only presents pre-allocated crash memory as
E820_TYPE_RAM on boot. If the pre-allocated range is small, it can fit under the
last E820_TYPE_ACPI range.

Modify e820__end_of_ram_pfn() and e820__end_of_low_ram_pfn() to cover
E820_TYPE_ACPI memory.

The problem was discovered during debugging kexec for TDX guest. TDX guest uses
E820_TYPE_ACPI to store the unaccepted memory bitmap and pass it between the
kernels on kexec.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-13-kirill.shutemov@linux.intel.com

TDX guests allocate shared buffers to perform I/O. It is done by allocating
pages normally from the buddy allocator and converting them to shared with
set_memory_decrypted().

The second, kexec-ed kernel has no idea what memory is converted this way. It
only sees E820_TYPE_RAM.

Accessing shared memory via private mapping is fatal. It leads to unrecoverable
TD exit.

On kexec, walk direct mapping and convert all shared memory back to private. It
makes all RAM private again and second kernel may use it normally.

The conversion occurs in two steps: stopping new conversions and unsharing all
memory. In the case of normal kexec, the stopping of conversions takes place
while scheduling is still functioning. This allows for waiting until any ongoing
conversions are finished. The second step is carried out when all CPUs except one
are inactive and interrupts are disabled. This prevents any conflicts with code
that may access shared memory.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-12-kirill.shutemov@linux.intel.com

AMD SEV and Intel TDX guests allocate shared buffers for performing I/O.
This is done by allocating pages normally from the buddy allocator and
then converting them to shared using set_memory_decrypted().

On kexec, the second kernel is unaware of which memory has been
converted in this manner. It only sees E820_TYPE_RAM. Accessing shared
memory as private is fatal.

Therefore, the memory state must be reset to its original state before
starting the new kernel with kexec.

The process of converting shared memory back to private occurs in two
steps:

- enc_kexec_begin() stops new conversions.

- enc_kexec_finish() unshares all existing shared memory, reverting it
  back to private.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-11-kirill.shutemov@linux.intel.com

The kernel will convert all shared memory back to private during kexec.
The direct mapping page tables will provide information on which memory
is shared.

It is extremely important to convert all shared memory. If a page is
missed, it will cause the second kernel to crash when it accesses it.

Keep track of the number of shared pages. This will allow for
cross-checking against the shared information in the direct mapping and
reporting if the shared bit is lost.

Memory conversion is slow and does not happen often. Global atomic is
not going to be a bottleneck.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-10-kirill.shutemov@linux.intel.com

Currently, lookup_address() returns two things:

  1. A "pte_t" (which might be a p[g4um]d_t)
  2. The 'level' of the page tables where the "pte_t" was found
     (returned via a pointer)

If no pte_t is found, 'level' is essentially garbage.

Always fill out the level.  For NULL "pte_t"s, fill in the level where
the p*d_none() entry was found mirroring the "found" behavior.

Always filling out the level allows using lookup_address() to precisely skip
over holes when walking kernel page tables.

Add one more entry into enum pg_level to indicate the size of the VA
covered by one PGD entry in 5-level paging mode.

Update comments for lookup_address() and lookup_address_in_pgd() to
reflect changes in the interface.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-9-kirill.shutemov@linux.intel.com

TDX is going to have more than one reason to fail enc_status_change_prepare().

Change the callback to return errno instead of assuming -EIO. Change
enc_status_change_finish() too to keep the interface symmetric.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-8-kirill.shutemov@linux.intel.com

TDX guests run with MCA enabled (CR4.MCE=1b) from the very start. If
that bit is cleared during CR4 register reprogramming during boot or kexec
flows, a #VE exception will be raised which the guest kernel cannot handle.

Therefore, make sure the CR4.MCE setting is preserved over kexec too and avoid
raising any #VEs.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240614095904.1345461-7-kirill.shutemov@linux.intel.com

That identity_mapped() function was loving that "1" label to the point of
completely confusing its readers.

Use named labels in each place for clarity.

No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-6-kirill.shutemov@linux.intel.com

ACPI MADT doesn't allow to offline a CPU after it has been woken up.

Currently, CPU hotplug is prevented based on the confidential computing
attribute which is set for Intel TDX. But TDX is not the only possible user of
the wake up method. Any platform that uses ACPI MADT wakeup method cannot
offline CPU.

Disable CPU offlining on ACPI MADT wakeup enumeration.

This has no visible effects for users: currently, TDX guest is the only platform
that uses the ACPI MADT wakeup method.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-5-kirill.shutemov@linux.intel.com

The ACPI MADT mailbox wakeup method doesn't allow to offline a CPU after
it has been woken up.

Currently, offlining is prevented based on the confidential computing attribute
which is set for Intel TDX. But TDX is not the only possible user of the wake up
method. The MADT wakeup can be implemented outside of a confidential computing
environment. Offline support is a property of the wakeup method, not the CoCo
implementation.

Introduce cpu_hotplug_disable_offlining() that can be called to indicate that
CPU offlining should be disabled.

This function is going to replace CC_ATTR_HOTPLUG_DISABLED for ACPI MADT wakeup
method.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-4-kirill.shutemov@linux.intel.com

acpi_mp_wake_mailbox_paddr and acpi_mp_wake_mailbox are initialized once during
ACPI MADT init and never changed.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kai Huang <kai.huang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-3-kirill.shutemov@linux.intel.com

In order to prepare for the expansion of support for the ACPI MADT
wakeup method, move the relevant code into a separate file.

Introduce a new configuration option to clearly indicate dependencies
without the use of ifdefs.

There have been no functional changes.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Kai Huang <kai.huang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-2-kirill.shutemov@linux.intel.com

This seemingly straightforward JMP was introduced in the initial version
of the the 64bit kexec code without any explanation.

It turns out (check accompanying Link) it's likely a copy/paste artefact
from 32-bit code, where such a JMP could be used as a serializing
instruction for the 486's prefetch queue. On x86_64 that's not needed
because there's already a preceding write to cr4 which itself is
a serializing operation.

  [ bp: Typos. Let's try this and see what cries out. If it does,
    reverting it is trivial. ]
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/55bc0649-c017-49ab-905d-212f140a403f@citrix.com/

pseudo_lock_region_init() and rdtgroup_cbm_to_size() open code a search for
details of a particular cache level.

Replace with get_cpu_cacheinfo_level().
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240610003927.341707-5-tony.luck@intel.com

Resctrl open codes a search for information about a given cache level in
a couple of places (and more are on the way).

Provide a new inline function get_cpu_cacheinfo_level() in
<linux/cacheinfo.h> to do the search and return a pointer to the
cacheinfo structure.

Add lockdep_assert_cpus_held() to enforce the comment that cpuhp lock
must be held.

Simplify the existing get_cpu_cacheinfo_id() by using this new function
to do the search.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240610003927.341707-4-tony.luck@intel.com

This file was created with a direct cut and paste from cpu.h so
kept the legacy declaration style.

But the Linux coding standard for function declarations in header
files is to avoid use of "extern".

Drop "extern" from all function declarations.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240610003927.341707-3-tony.luck@intel.com

Avoid upcoming #include hell when <linux/cachinfo.h> wants to use
lockdep_assert_cpus_held() and creates a #include loop that would
break the build for arch/riscv.

  [ bp: s/cpu/CPU/g ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240610003927.341707-2-tony.luck@intel.com

Merge tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Update copies of kernel headers, which resulted in support for the
   new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC
   prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector,
   'map_shadow_stack' syscall for x86-32.

 - Revert perf.data record memory allocation optimization that ended up
   causing a regression, work is being done to re-introduce it in the
   next merge window.

 - Fix handling of minimal vmlinux.h file used with BPF's CO-RE when
   interrupting the build.

* tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build
  Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event"
  tools headers arm64: Sync arm64's cputype.h with the kernel sources
  tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL
  tools headers UAPI: Update i915_drm.h with the kernel sources
  tools headers UAPI: Sync kvm headers with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall
  perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION
  perf beauty: Update copy of linux/socket.h with the kernel sources
  tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync linux/stat.h with the kernel sources

Pull EDAC fixes from Borislav Petkov:

 - Convert PCI core error codes to proper error numbers since latter get
   propagated all the way up to the module loading functions

* tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/igen6: Convert PCIBIOS_* return codes to errnos
  EDAC/amd64: Convert PCIBIOS_* return codes to errnos

Pull clk fix from Stephen Boyd:
 "One fix for the SiFive PRCI clocks so that the device boots again.

  This driver was registering clkdev lookups that were always going to
  be useless. This wasn't a problem until clkdev started returning an
  error in these cases, causing this driver to fail probe, and thus boot
  to fail because clks are essential for most drivers. The fix is
  simple, don't use clkdev because this is a DT based system where
  clkdev isn't used"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sifive: Do not register clkdevs for PRCI clocks

Pull smb client fixes from Steve French:
 "Two small smb3 client fixes:

   - fix deadlock in umount

   - minor cleanup due to netfs change"

* tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Don't advance the I/O iterator before terminating subrequest
  smb: client: fix deadlock in smb2_find_smb_tcon()

Pull HID fixes from Benjamin Tissoires:

 - fix potential read out of bounds in hid-asus (Andrew Ballance)

 - fix endian-conversion on little endian systems in intel-ish-hid (Arnd
   Bergmann)

 - A couple of new input event codes (Aseda Aboagye)

 - errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
   (Christophe JAILLET), hid-logitech-dj (José Expósito)

 - current leakage fix while the device is in suspend on a i2c-hid
   laptop (Johan Hovold)

 - other assorted smaller fixes and device ID / quirk entry additions

* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Ignore battery for ELAN touchscreens 2F2C and 4116
  HID: i2c-hid: elan: fix reset suspend current leakage
  dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
  dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
  dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
  input: Add support for "Do Not Disturb"
  input: Add event code for accessibility key
  hid: asus: asus_report_fixup: fix potential read out of bounds
  HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
  HID: intel-ish-hid: fix endian-conversion
  HID: nintendo: Fix an error handling path in nintendo_hid_probe()
  HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
  HID: core: remove unnecessary WARN_ON() in implement()
  HID: nvidia-shield: Add missing check for input_ff_create_memless
  HID: intel-ish-hid: Fix build error for COMPILE_TEST

Merge tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix the initial state of the save button in 'make gconfig'

 - Improve the Kconfig documentation

 - Fix a Kconfig bug regarding property visibility

 - Fix build breakage for systems where 'sed' is not installed in /bin

 - Fix a false warning about missing MODULE_DESCRIPTION()

* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
  kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
  kconfig: remove wrong expr_trans_bool()
  kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
  kconfig: doc: fix a typo in the note about 'imply'
  kconfig: gconf: give a proper initial state to the Save button
  kconfig: remove unneeded code for user-supplied values being out of range

Pull media fixes from Mauro Carvalho Chehab:

 - fixes for the new ipu6 driver (and related fixes to mei csi driver)

 - fix a double debugfs remove logic at mgb4 driver

 - a documentation fix

* tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: intel/ipu6: add csi2 port sanity check in notifier bound
  media: intel/ipu6: update the maximum supported csi2 port number to 6
  media: mei: csi: Warn less verbosely of a missing device fwnode
  media: mei: csi: Put the IPU device reference
  media: intel/ipu6: fix the buffer flags caused by wrong parentheses
  media: intel/ipu6: Fix an error handling path in isys_probe()
  media: intel/ipu6: Move isys_remove() close to isys_probe()
  media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove()
  media: Documentation: v4l: Fix ACTIVE route flag
  media: mgb4: Fix double debugfs remove

Pull irq fixes from Ingo Molnar:

 - Fix possible memory leak the riscv-intc irqchip driver load failures

 - Fix boot crash in the sifive-plic irqchip driver caused by recently
   changed boot initialization order

 - Fix race condition in the gic-v3-its irqchip driver

* tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()
  irqchip/sifive-plic: Chain to parent IRQ after handlers are ready
  irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails

Pull x86 fixes from Ingo Molnar:
 "Miscellaneous fixes:

   - Fix kexec() crash if call depth tracking is enabled

   - Fix SMN reads on inaccessible registers on certain AMD systems"

* tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/amd_nb: Check for invalid SMN reads
  x86/kexec: Fix bug with call depth tracking

Pull perf event fix from Ingo Molnar:
 "Fix race between perf_event_free_task() and perf_event_release_kernel()
  that can result in missed wakeups and hung tasks"

* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix missing wakeup when waiting for context reference

Pull locking doc fix from Ingo Molnar:
 "Fix typos in the kerneldoc of some of the atomic APIs"

* tag 'locking-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: scripts: fix ${atomic}_sub_and_test() kerneldoc

Merge tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "14 hotfixes, 6 of which are cc:stable.

  All except the nilfs2 fix affect MM and all are singletons - see the
  chagelogs for details"

* tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
  mm: fix xyz_noprof functions calling profiled functions
  codetag: avoid race at alloc_slab_obj_exts
  mm/hugetlb: do not call vma_add_reservation upon ENOMEM
  mm/ksm: fix ksm_zero_pages accounting
  mm/ksm: fix ksm_pages_scanned accounting
  kmsan: do not wipe out origin when doing partial unpoisoning
  vmalloc: check CONFIG_EXECMEM in is_vmalloc_or_module_addr()
  mm: page_alloc: fix highatomic typing in multi-block buddies
  nilfs2: fix potential kernel bug due to lack of writeback flag waiting
  memcg: remove the lockdep assert from __mod_objcg_mlstate()
  mm: arm64: fix the out-of-bounds issue in contpte_clear_young_dirty_ptes
  mm: huge_mm: fix undefined reference to `mthp_stats' for CONFIG_SYSFS=n
  mm: drop the 'anon_' prefix for swap-out mTHP counters

Pull gpio fixes from Bartosz Golaszewski:

 - interrupt handling and Kconfig fixes for gpio-tqmx86

 - add a buffer for storing output values in gpio-tqmx86 as reading back
   the registers always returns the input values

 - add missing MODULE_DESCRIPTION()s to several GPIO drivers

* tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: add missing MODULE_DESCRIPTION() macros
  gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type
  gpio: tqmx86: store IRQ trigger type and unmask status separately
  gpio: tqmx86: introduce shadow register for GPIO output value
  gpio: tqmx86: fix typo in Kconfig label

Pull block fixes from Jens Axboe:

 - Fix for null_blk block size validation (Andreas)

 - NVMe pull request via Keith:
      - Use reserved tags for special fabrics operations (Chunguang)
      - Persistent Reservation status masking fix (Weiwen)

* tag 'block-6.10-20240607' of git://git.kernel.dk/linux:
  null_blk: fix validation of block size
  nvme: fix nvme_pr_* status code parsing
  nvme-fabrics: use reserved tag for reg read/write command

Pull io_uring fixes from Jens Axboe:

 - Fix a locking order issue with setting max async thread workers
   (Hagar)

 - Fix for a NULL pointer dereference for failed async flagged requests
   using ring provided buffers. This doesn't affect the current kernel,
   but it does affect older kernels, and is being queued up for 6.10
   just to make the stable process easier (me)

 - Fix for NAPI timeout calculations for how long to busy poll, and
   subsequently how much to sleep post that if a wait timeout is passed
   in (me)

 - Fix for a regression in this release cycle, where we could end up
   using a partially unitialized match value for io-wq (Su)

* tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux:
  io_uring: fix possible deadlock in io_register_iowq_max_workers()
  io_uring/io-wq: avoid garbage value of 'match' in io_wq_enqueue()
  io_uring/napi: fix timeout calculation
  io_uring: check for non-NULL file pointer in io_file_can_poll()