KVM: x86: Selftests changes for 6.6:

 - Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs

 - Add support for printf() in guest code and covert all guest asserts to use
   printf-based reporting

 - Clean up the PMU event filter test and add new testcases

 - Include x86 selftests in the KVM x86 MAINTAINERS entry

Common KVM changes for 6.6:

 - Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
   action specific data without needing to constantly update the main handlers.

 - Drop unused function declarations

KVM/arm64 updates for Linux 6.6

- Add support for TLB range invalidation of Stage-2 page tables,
  avoiding unnecessary invalidations. Systems that do not implement
  range invalidation still rely on a full invalidation when dealing
  with large ranges.

- Add infrastructure for forwarding traps taken from a L2 guest to
  the L1 guest, with L0 acting as the dispatcher, another baby step
  towards the full nested support.

- Simplify the way we deal with the (long deprecated) 'CPU target',
  resulting in a much needed cleanup.

- Fix another set of PMU bugs, both on the guest and host sides,
  as we seem to never have any shortage of those...

- Relax the alignment requirements of EL2 VA allocations for
  non-stack allocations, as we were otherwise wasting a lot of that
  precious VA space.

- The usual set of non-functional cleanups, although I note the lack
  of spelling fixes...

* kvm-arm64/6.6/misc:
  : .
  : Misc KVM/arm64 updates for 6.6:
  :
  : - Don't unnecessary align non-stack allocations in the EL2 VA space
  :
  : - Drop HCR_VIRT_EXCP_MASK, which was never used...
  :
  : - Don't use smp_processor_id() in kvm_arch_vcpu_load(),
  :   but the cpu parameter instead
  :
  : - Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
  :
  : - Remove prototypes without implementations
  : .
  KVM: arm64: Remove size-order align in the nVHE hyp private VA range
  KVM: arm64: Remove unused declarations
  KVM: arm64: Remove redundant kvm_set_pfn_accessed() from user_mem_abort()
  KVM: arm64: Drop HCR_VIRT_EXCP_MASK
  KVM: arm64: Use the known cpu id instead of smp_processor_id()
Signed-off-by: Marc Zyngier <maz@kernel.org>

* kvm-arm64/6.6/pmu-fixes:
  : .
  : Another set of PMU fixes, coutrtesy of Reiji Watanabe.
  : From the cover letter:
  :
  : "This series fixes a couple of PMUver related handling of
  : vPMU support.
  :
  : On systems where the PMUVer is not uniform across all PEs,
  : KVM currently does not advertise PMUv3 to the guest,
  : even if userspace successfully runs KVM_ARM_VCPU_INIT with
  : KVM_ARM_VCPU_PMU_V3."
  :
  : Additionally, a fix for an obscure counter oversubscription
  : issue happening when the hsot profines the guest's EL0.
  : .
  KVM: arm64: pmu: Guard PMU emulation definitions with CONFIG_KVM
  KVM: arm64: pmu: Resync EL0 state on counter rotation
  KVM: arm64: PMU: Don't advertise STALL_SLOT_{FRONTEND,BACKEND}
  KVM: arm64: PMU: Don't advertise the STALL_SLOT event
  KVM: arm64: PMU: Avoid inappropriate use of host's PMUVer
  KVM: arm64: PMU: Disallow vPMU on non-uniform PMUVer
Signed-off-by: Marc Zyngier <maz@kernel.org>

* kvm-arm64/tlbi-range:
  : .
  : FEAT_TLBIRANGE support, courtesy of Raghavendra Rao Ananta.
  : From the cover letter:
  :
  : "In certain code paths, KVM/ARM currently invalidates the entire VM's
  : page-tables instead of just invalidating a necessary range. For example,
  : when collapsing a table PTE to a block PTE, instead of iterating over
  : each PTE and flushing them, KVM uses 'vmalls12e1is' TLBI operation to
  : flush all the entries. This is inefficient since the guest would have
  : to refill the TLBs again, even for the addresses that aren't covered
  : by the table entry. The performance impact would scale poorly if many
  : addresses in the VM is going through this remapping.
  :
  : For architectures that implement FEAT_TLBIRANGE, KVM can replace such
  : inefficient paths by performing the invalidations only on the range of
  : addresses that are in scope. This series tries to achieve the same in
  : the areas of stage-2 map, unmap and write-protecting the pages."
  : .
  KVM: arm64: Use TLBI range-based instructions for unmap
  KVM: arm64: Invalidate the table entries upon a range
  KVM: arm64: Flush only the memslot after write-protect
  KVM: arm64: Implement kvm_arch_flush_remote_tlbs_range()
  KVM: arm64: Define kvm_tlb_flush_vmid_range()
  KVM: arm64: Implement __kvm_tlb_flush_vmid_range()
  arm64: tlb: Implement __flush_s2_tlb_range_op()
  arm64: tlb: Refactor the core flush algorithm of __flush_tlb_range
  KVM: Move kvm_arch_flush_remote_tlbs_memslot() to common code
  KVM: Allow range-based TLB invalidation from common code
  KVM: Remove CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL
  KVM: arm64: Use kvm_arch_flush_remote_tlbs()
  KVM: Declare kvm_arch_flush_remote_tlbs() globally
  KVM: Rename kvm_arch_flush_remote_tlb() to kvm_arch_flush_remote_tlbs()
Signed-off-by: Marc Zyngier <maz@kernel.org>

* kvm-arm64/nv-trap-forwarding: (30 commits)
  : .
  : This implements the so called "trap forwarding" infrastructure, which
  : gets used when we take a trap from an L2 guest and that the L1 guest
  : wants to see the trap for itself.
  : .
  KVM: arm64: nv: Add trap description for SPSR_EL2 and ELR_EL2
  KVM: arm64: nv: Select XARRAY_MULTI to fix build error
  KVM: arm64: nv: Add support for HCRX_EL2
  KVM: arm64: Move HCRX_EL2 switch to load/put on VHE systems
  KVM: arm64: nv: Expose FGT to nested guests
  KVM: arm64: nv: Add switching support for HFGxTR/HDFGxTR
  KVM: arm64: nv: Expand ERET trap forwarding to handle FGT
  KVM: arm64: nv: Add SVC trap forwarding
  KVM: arm64: nv: Add trap forwarding for HDFGxTR_EL2
  KVM: arm64: nv: Add trap forwarding for HFGITR_EL2
  KVM: arm64: nv: Add trap forwarding for HFGxTR_EL2
  KVM: arm64: nv: Add fine grained trap forwarding infrastructure
  KVM: arm64: nv: Add trap forwarding for CNTHCTL_EL2
  KVM: arm64: nv: Add trap forwarding for MDCR_EL2
  KVM: arm64: nv: Expose FEAT_EVT to nested guests
  KVM: arm64: nv: Add trap forwarding for HCR_EL2
  KVM: arm64: nv: Add trap forwarding infrastructure
  KVM: arm64: Restructure FGT register switching
  KVM: arm64: nv: Add FGT registers
  KVM: arm64: Add missing HCR_EL2 trap bits
  ...
Signed-off-by: Marc Zyngier <maz@kernel.org>

Pull SCSI fixes from James Bottomley:
 "Three small driver fixes and one larger unused function set removal in
  the raid class (so no external impact)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: snic: Fix double free in snic_tgt_create()
  scsi: core: raid_class: Remove raid_component_add()
  scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5
  scsi: ufs: mcq: Fix the search/wrap around logic

Pull x86 fixes from Ingo Molnar:
 "Fix an FPU invalidation bug on exec(), and fix a performance
  regression due to a missing setting of X86_FEATURE_OSXSAVE"

* tag 'x86-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Set X86_FEATURE_OSXSAVE feature after enabling OSXSAVE in CR4
  x86/fpu: Invalidate FPU state correctly on exec()

Pull irq fix from Thomas Gleixner:
 "A last minute fix for a regression introduced in the v6.5 merge
  window.

  The conversion of the software based interrupt resend mechanism to
  hlist missed to add a check whether the descriptor is already enqueued
  and dropped the interrupt descriptor lookup for nested interrupts.

  The missing check whether the descriptor is already queued causes
  hlist corruption and can be observed in the wild. The dropped parent
  descriptor lookup has not yet caused problems, but it would result in
  stale interrupt line in the worst case.

  Add the missing enqueued check and bring the descriptor lookup back to
  cure this"

* tag 'irq-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Fix software resend lockup and nested resend

Merge tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix a ptrace bug, a hw_breakpoint bug, some build errors/warnings and
  some trivial cleanups"

* tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Fix hw_breakpoint_control() for watchpoints
  LoongArch: Ensure FP/SIMD registers in the core dump file is up to date
  LoongArch: Put the body of play_dead() into arch_cpu_idle_dead()
  LoongArch: Add identifier names to arguments of die() declaration
  LoongArch: Return earlier in die() if notify_die() returns NOTIFY_STOP
  LoongArch: Do not kill the task in die() if notify_die() returns NOTIFY_STOP
  LoongArch: Remove <asm/export.h>
  LoongArch: Replace #include <asm/export.h> with #include <linux/export.h>
  LoongArch: Remove unneeded #include <asm/export.h>
  LoongArch: Replace -ffreestanding with finer-grained -fno-builtin's
  LoongArch: Remove redundant "source drivers/firmware/Kconfig"

The switch to using hlist for managing software resend of interrupts
broke resend in at least two ways:

First, unconditionally adding interrupt descriptors to the resend list can
corrupt the list when the descriptor in question has already been
added. This causes the resend tasklet to loop indefinitely with interrupts
disabled as was recently reported with the Lenovo ThinkPad X13s after
threaded NAPI was disabled in the ath11k WiFi driver.

This bug is easily fixed by restoring the old semantics of irq_sw_resend()
so that it can be called also for descriptors that have already been marked
for resend.

Second, the offending commit also broke software resend of nested
interrupts by simply discarding the code that made sure that such
interrupts are retriggered using the parent interrupt.

Add back the corresponding code that adds the parent descriptor to the
resend list.

Fixes: bc06a9e0 ("genirq: Use hlist for managing resend handlers")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/lkml/20230809073432.4193-1-johan+linaro@kernel.org/
Link: https://lore.kernel.org/r/20230826154004.1417-1-johan+linaro@kernel.org

In hw_breakpoint_control(), encode_ctrl_reg() has already encoded the
MWPnCFG3_LoadEn/MWPnCFG3_StoreEn bits in info->ctrl. We don't need to
add (1 << MWPnCFG3_LoadEn | 1 << MWPnCFG3_StoreEn) unconditionally.

Otherwise we can't set read watchpoint and write watchpoint separately.

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

This is a port of commit 379eb01c ("riscv: Ensure the value
of FP registers in the core dump file is up to date").

The values of FP/SIMD registers in the core dump file come from the
thread.fpu. However, kernel saves the FP/SIMD registers only before
scheduling out the process. If no process switch happens during the
exception handling, kernel will not have a chance to save the latest
values of FP/SIMD registers. So it may cause their values in the core
dump file incorrect. To solve this problem, force fpr_get()/simd_get()
to save the FP/SIMD registers into the thread.fpu if the target task
equals the current task.

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

commit f922c13e ("KVM: arm64: Introduce
pkvm_alloc_private_va_range()") and commit 92abe0f8 ("KVM: arm64:
Introduce hyp_alloc_private_va_range()") added an alignment for the
start address of any allocation into the nVHE hypervisor private VA
range.

This alignment (order of the size of the allocation) intends to enable
efficient stack verification (if the PAGE_SHIFT bit is zero, the stack
pointer is on the guard page and a stack overflow occurred).

But this is only necessary for stack allocation and can waste a lot of
VA space. So instead make stack-specific functions, handling the guard
page requirements, while other users (e.g.  fixmap) will only get page
alignment.
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811112037.1147863-1-vdonnefort@google.com

Pull clk fixes from Stephen Boyd:
 "One clk driver fix and two clk framework fixes:

   - Fix an OOB access when devm_get_clk_from_child() is used and
     devm_clk_release() casts the void pointer to the wrong type

   - Move clk_rate_exclusive_{get,put}() within the correct ifdefs in
     clk.h so that the stubs are used when CONFIG_COMMON_CLK=n

   - Register the proper clk provider function depending on the value of
     #clock-cells in the TI keystone driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: Fix slab-out-of-bounds error in devm_clk_release()
  clk: Fix undefined reference to `clk_rate_exclusive_{get,put}'
  clk: keystone: syscon-clk: Fix audio refclk

The gcc compiler translates on some architectures the 64-bit
__builtin_clzll() function to a call to the libgcc function __clzdi2(),
which should take a 64-bit parameter on 32- and 64-bit platforms.

But in the current kernel code, the built-in __clzdi2() function is
defined to operate (wrongly) on 32-bit parameters if BITS_PER_LONG ==
32, thus the return values on 32-bit kernels are in the range from
[0..31] instead of the expected [0..63] range.

This patch fixes the in-kernel functions __clzdi2() and __ctzdi2() to
take a 64-bit parameter on 32-bit kernels as well, thus it makes the
functions identical for 32- and 64-bit kernels.

This bug went unnoticed since kernel 3.11 for over 10 years, and here
are some possible reasons for that:

 a) Some architectures have assembly instructions to count the bits and
    which are used instead of calling __clzdi2(), e.g. on x86 the bsr
    instruction and on ppc cntlz is used. On such architectures the
    wrong __clzdi2() implementation isn't used and as such the bug has
    no effect and won't be noticed.

 b) Some architectures link to libgcc.a, and the in-kernel weak
    functions get replaced by the correct 64-bit variants from libgcc.a.

 c) __builtin_clzll() and __clzdi2() doesn't seem to be used in many
    places in the kernel, and most likely only in uncritical functions,
    e.g. when printing hex values via seq_put_hex_ll(). The wrong return
    value will still print the correct number, but just in a wrong
    formatting (e.g. with too many leading zeroes).

 d) 32-bit kernels aren't used that much any longer, so they are less
    tested.

A trivial testcase to verify if the currently running 32-bit kernel is
affected by the bug is to look at the output of /proc/self/maps:

Here the kernel uses a correct implementation of __clzdi2():

  root@debian:~# cat /proc/self/maps
  00010000-00019000 r-xp 00000000 08:05 787324     /usr/bin/cat
  00019000-0001a000 rwxp 00009000 08:05 787324     /usr/bin/cat
  0001a000-0003b000 rwxp 00000000 00:00 0          [heap]
  f7551000-f770d000 r-xp 00000000 08:05 794765     /usr/lib/hppa-linux-gnu/libc.so.6
  ...

and this kernel uses the broken implementation of __clzdi2():

  root@debian:~# cat /proc/self/maps
  0000000010000-0000000019000 r-xp 00000000 000000008:000000005 787324  /usr/bin/cat
  0000000019000-000000001a000 rwxp 000000009000 000000008:000000005 787324  /usr/bin/cat
  000000001a000-000000003b000 rwxp 00000000 00:00 0  [heap]
  00000000f73d1000-00000000f758d000 r-xp 00000000 000000008:000000005 794765  /usr/lib/hppa-linux-gnu/libc.so.6
  ...
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 4df87bb7 ("lib: add weak clz/ctz functions")
Cc: Chanho Min <chanho.min@lge.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mm-hotfixes-stable-2023-08-25-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "18 hotfixes. 13 are cc:stable and the remainder pertain to post-6.4
  issues or aren't considered suitable for a -stable backport"

* tag 'mm-hotfixes-stable-2023-08-25-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  shmem: fix smaps BUG sleeping while atomic
  selftests: cachestat: catch failing fsync test on tmpfs
  selftests: cachestat: test for cachestat availability
  maple_tree: disable mas_wr_append() when other readers are possible
  madvise:madvise_free_pte_range(): don't use mapcount() against large folio for sharing check
  madvise:madvise_free_huge_pmd(): don't use mapcount() against large folio for sharing check
  madvise:madvise_cold_or_pageout_pte_range(): don't use mapcount() against large folio for sharing check
  mm: multi-gen LRU: don't spin during memcg release
  mm: memory-failure: fix unexpected return value in soft_offline_page()
  radix tree: remove unused variable
  mm: add a call to flush_cache_vmap() in vmap_pfn()
  selftests/mm: FOLL_LONGTERM need to be updated to 0x100
  nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()
  mm/gup: handle cont-PTE hugetlb pages correctly in gup_must_unshare() via GUP-fast
  selftests: cgroup: fix test_kmem_basic less than error
  mm: enable page walking API to lock vmas during the walk
  smaps: use vm_normal_page_pmd() instead of follow_trans_huge_pmd()
  mm/gup: reintroduce FOLL_NUMA as FOLL_HONOR_NUMA_FAULT

Pull RISC-V fixes from Palmer Dabbelt:
 "This is obviously not ideal, particularly for something this late in
  the cycle.

  Unfortunately we found some uABI issues in the vector support while
  reviewing the GDB port, which has triggered a revert -- probably a
  good sign we should have reviewed GDB before merging this, I guess I
  just dropped the ball because I was so worried about the context
  extension and libc suff I forgot. Hence the late revert.

  There's some risk here as we're still exposing the vector context for
  signal handlers, but changing that would have meant reverting all of
  the vector support. The issues we've found so far have been fixed
  already and they weren't absolute showstoppers, so we're essentially
  just playing it safe by holding ptrace support for another release (or
  until we get through a proper userspace code review).

  Summary:

   - The vector ucontext extension has been extended with vlenb

   - The vector registers ELF core dump note type has been changed to
     avoid aliasing with the CSR type used in embedded systems

   - Support for accessing vector registers via ptrace() has been
     reverted

   - Another build fix for the ISA spec changes around Zifencei/Zicsr
     that manifests on some systems built with binutils-2.37 and
     gcc-11.2"

* tag 'riscv-for-linus-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix build errors using binutils2.37 toolchains
  RISC-V: vector: export VLENB csr in __sc_riscv_v_state
  RISC-V: Remove ptrace support for vectors

Pull gpio fixes from Bartosz Golaszewski:

 - fix an irq mapping leak in gpio-sim

 - associate the GPIO device's software node with the irq domain in
   gpio-sim

* tag 'gpio-fixes-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: sim: pass the GPIO device's software node to irq domain
  gpio: sim: dispose of irq mappings before destroying the irq_sim domain

Pull pin control fixes from Linus Walleij:
 "Here are some Renesas and AMD driver fixes, the AMD fix affects
  important laptops in the wild so this one is pretty important. It
  seems a bit tough to get this right.

   - Fix DT parsing and related locking in the Renesas driver.

   - Fix wakeup IRQs in the AMD driver once again. Really tricky this
     one"

* tag 'pinctrl-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: amd: Mask wake bits on probe again
  pinctrl: renesas: rza2: Add lock around pinctrl_generic{{add,remove}_group,{add,remove}_function}
  pinctrl: renesas: rzv2m: Fix NULL pointer dereference in rzv2m_dt_subnode_to_map()
  pinctrl: renesas: rzg2l: Fix NULL pointer dereference in rzg2l_dt_subnode_to_map()

Give KVM x86 the same treatment as all other KVM architectures, and
officially take ownership of x86 specific KVM selftests (changes have
been routed through kvm and/or kvm-x86 for quite some time).

Cc: kvm@vger.kernel.org
Link: https://lore.kernel.org/r/20230817234114.1420092-1-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Explicitly set the exception vector to #UD when potentially injecting an
exception in sync_regs_test's subtests that try to detect TOCTOU bugs
in KVM's handling of exceptions injected by userspace.  A side effect of
the original KVM bug was that KVM would clear the vector, but relying on
KVM to clear the vector (i.e. make it #DE) makes it less likely that the
test would ever find *new* KVM bugs, e.g. because only the first iteration
would run with a legal vector to start.

Explicitly inject #UD for race_events_inj_pen() as well, e.g. so that it
doesn't inherit the illegal 255 vector from race_events_exc(), which
currently runs first.

Link: https://lore.kernel.org/r/20230817233430.1416463-3-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Reload known good vCPU state if the vCPU triple faults in any of the
race_sync_regs() subtests, e.g. if KVM successfully injects an exception
(the vCPU isn't configured to handle exceptions).  On Intel, the VMCS
is preserved even after shutdown, but AMD's APM states that the VMCB is
undefined after a shutdown and so KVM synthesizes an INIT to sanitize
vCPU/VMCB state, e.g. to guard against running with a garbage VMCB.

The synthetic INIT results in the vCPU never exiting to userspace, as it
gets put into Real Mode at the reset vector, which is full of zeros (as is
GPA 0 and beyond), and so executes ADD for a very, very long time.

Fixes: 60c4063b ("KVM: selftests: Extend x86's sync_regs_test to check for event vector races")
Cc: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230817233430.1416463-2-seanjc@google.comSigned-off-by: Sean Christopherson <seanjc@google.com>

Pull sound fixes from Takashi Iwai:
 "Hopefully the last bits for 6.5. It's slightly higher LOCs than
  wished, but it doesn't look scary.

  The biggest change is MAINTAINERS update for TI; it's good to have the
  update before the final release, so that people can contact to the
  right persons for bug reports (which shouldn't happen of course!)

  The rest are all device-specific fixes and quirks, most for various
  ASoC platforms"

* tag 'sound-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: amd: yc: Fix a non-functional mic on Lenovo 82SJ
  ALSA: ymfpci: Fix the missing snd_card_free() call at probe error
  ASoC: cs35l41: Correct amp_gain_tlv values
  ASoC: amd: yc: Add VivoBook Pro 15 to quirks list for acp6x
  ASoC: tas2781: fixed register access error when switching to other chips
  ASoC: cs35l56: Add an ACPI match table
  ASoC: cs35l56: Read firmware uuid from a device property instead of _SUB
  ASoC: SOF: ipc4-pcm: fix possible null pointer deference
  MAINTAINERS: Add entries for TEXAS INSTRUMENTS ASoC DRIVERS

The initial aim is to silence the following objtool warning:

arch/loongarch/kernel/process.o: warning: objtool: arch_cpu_idle_dead() falls through to next function start_thread()

According to tools/objtool/Documentation/objtool.txt, this is because
the last instruction of arch_cpu_idle_dead() is a call to a noreturn
function play_dead(). In order to silence the warning, one simple way
is to add the noreturn function play_dead() to objtool's hard-coded
global_noreturns array, that is to say, just put "NORETURN(play_dead)"
into tools/objtool/noreturns.h, it works well.

But I noticed that play_dead() is only defined once and only called by
arch_cpu_idle_dead(), so put the body of play_dead() into the caller
arch_cpu_idle_dead(), then remove the noreturn function play_dead() is
an alternative way which can reduce the overhead of the function call
at the same time.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add identifier names to arguments of die() declaration in ptrace.h
to fix the following checkpatch warnings:

  WARNING: function definition argument 'const char *' should also have an identifier name
  WARNING: function definition argument 'struct pt_regs *' should also have an identifier name
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

After the call to oops_exit(), it should not panic or execute
the crash kernel if the oops is to be suppressed.
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

If notify_die() returns NOTIFY_STOP, honor the return value from the
handler chain invocation in die() and return without killing the task
as, through a debugger, the fault may have been fixed. It makes sense
even if ignoring the event will make the system unstable: by allowing
access through a debugger it has been compromised already anyway. It
makes our port consistent with x86, arm64, riscv and csky.

Commit 20c0d2d4 ("[PATCH] i386: pass proper trap numbers to die
chain handlers") may be the earliest of similar changes.

Link: https://lore.kernel.org/r/43DDF02E.76F0.0078.0@novell.com/Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

All *.S files under arch/loongarch/ have been converted to include
<linux/export.h> instead of <asm/export.h>.

Remove <asm/export.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Commit ddb5cdba ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>.

Replace #include <asm/export.h> with #include <linux/export.h>.

After all the <asm/export.h> lines are converted, <asm/export.h> and
<asm-generic/export.h> will be removed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

There is no EXPORT_SYMBOL() line there, hence #include <asm/export.h>
is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

As explained by Nick in the original issue: the kernel usually does a
good job of providing library helpers that have similar semantics as
their ordinary userspace libc equivalents, but -ffreestanding disables
such libcall optimization and other related features in the compiler,
which can lead to unexpected things such as CONFIG_FORTIFY_SOURCE not
working (!).

However, due to the desire for better control over unaligned accesses
with respect to CONFIG_ARCH_STRICT_ALIGN, and also for avoiding the
GCC bug https://gcc.gnu.org/PR109465, we do want to still disable
optimizations for the memory libcalls (memcpy, memmove and memset for
now). Use finer-grained -fno-builtin-* toggles to achieve this without
losing source fortification and other libcall optimizations.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1897Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

In drivers/Kconfig, drivers/firmware/Kconfig is sourced for all ports so
there is no need to source it in the port-specific Kconfig file.  And
sourcing it here also caused the "Firmware Drivers" menu appeared two
times: one in the "Device Drivers" menu, another in the toplevel menu.
This is really puzzling so remove it.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Pull drm fixes from Dave Airlie:
 "A bit bigger than I'd care for, but it's mostly a single vmwgfx fix
  and a fix for an i915 hotplug probing. Otherwise misc i915, bridge,
  panfrost and dma-buf fixes.

  core:
   - add a HPD poll helper

  i915:
   - fix regression in i915 polling
   - fix docs build warning
   - fix DG2 idle power consumption

  bridge:
   - samsung-dsim: init fix

  panfrost:
   - fix speed binning issue

  dma-buf:
   - fix recursive lock in fence signal

  vmwgfx:
   - fix shader stage validation
   - fix NULL ptr derefs in gem put"

* tag 'drm-fixes-2023-08-25' of git://anongit.freedesktop.org/drm/drm:
  drm/i915: Fix HPD polling, reenabling the output poll work as needed
  drm: Add an HPD poll helper to reschedule the poll work
  drm/vmwgfx: Fix possible invalid drm gem put calls
  drm/vmwgfx: Fix shader stage validation
  dma-buf/sw_sync: Avoid recursive lock during fence signal
  drm/i915: fix Sphinx indentation warning
  drm/i915/dgfx: Enable d3cold at s2idle
  drm/display/dp: Fix the DP DSC Receiver cap size
  drm/panfrost: Skip speed binning on EOPNOTSUPP
  drm: bridge: samsung-dsim: Fix init during host transfer

Merge tag 'asoc-fix-v6.5-rc7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Quirk for v6.5

One additional fix for v6.5, an additional quirk.  As with the other
fixes this could wait for the merge window.

Pull tracing fixes from Steven Rostedt:

 - Fix ring buffer being permanently disabled due to missed
   record_disabled()

   Changing the trace cpu mask will disable the ring buffers for the
   CPUs no longer in the mask. But it fails to update the snapshot
   buffer. If a snapshot takes place, the accounting for the ring buffer
   being disabled is corrupted and this can lead to the ring buffer
   being permanently disabled.

 - Add test case for snapshot and cpu mask working together

 - Fix memleak by the function graph tracer not getting closed properly.

   The iterator is used to read the ring buffer. When it opens, it calls
   the open function of a tracer, and when it is closed, it calls the
   close iteration. While a trace is being read, it is still possible to
   change the tracer.

   If this happens between the function graph tracer and the wakeup
   tracer (which uses function graph tracing), the tracers are not
   closed properly during when the iterator sees the switch, and the
   wakeup function did not initialize its private pointer to NULL, which
   is used to know if the function graph tracer was the last tracer. It
   could be fooled in thinking it is, but then on exit it does not call
   the close function of the function graph tracer to clean up its data.

 - Fix synthetic events on big endian machines, by introducing a union
   that does the conversions properly.

 - Fix synthetic events from printing out the number of elements in the
   stacktrace when it shouldn't.

 - Fix synthetic events stacktrace to not print a bogus value at the
   end.

 - Introduce a pipe_cpumask that prevents the trace_pipe files from
   being opened by more than one task (file descriptor).

   There was a race found where if splice is called, the iter->ent could
   become stale and events could be missed. There's no point reading a
   producer/consumer file by more than one task as they will corrupt
   each other anyway. Add a cpumask that keeps track of the per_cpu
   trace_pipe files as well as the global trace_pipe file that prevents
   more than one open of a trace_pipe file that represents the same ring
   buffer. This prevents the race from happening.

 - Fix ftrace samples for arm64 to work with older compilers.

* tag 'trace-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  samples: ftrace: Replace bti assembly with hint for older compiler
  tracing: Introduce pipe_cpumask to avoid race on trace_pipes
  tracing: Fix memleak due to race between current_tracer and trace
  tracing/synthetic: Allocate one additional element for size
  tracing/synthetic: Skip first entry for stack traces
  tracing/synthetic: Use union instead of casts
  selftests/ftrace: Add a basic testcase for snapshot
  tracing: Fix cpu buffers unavailable due to 'record_disabled' missed

Commit 41320b18 ("scsi: snic: Fix possible memory leak if device_add()
fails") fixed the memory leak caused by dev_set_name() when device_add()
failed. However, it did not consider that 'tgt' has already been released
when put_device(&tgt->dev) is called. Remove kfree(tgt) in the error path
to avoid double free of 'tgt' and move put_device(&tgt->dev) after the
removed kfree(tgt) to avoid a use-after-free.

Fixes: 41320b18 ("scsi: snic: Fix possible memory leak if device_add() fails")
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230819083941.164365-1-wangzhu9@huawei.comSigned-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull media fix from Mauro Carvalho Chehab:
 "Fix a potential array out-of-bounds in the mediatek vcodec driver"

* tag 'media/v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: vcodec: Fix potential array out-of-bounds in encoder queue_setup