- 03 Sep, 2023 19 commits
-
-
Yuan Yao authored
In current packed virtqueue implementation, the avail_wrap_counter won't flip, in the case when the driver supplies a descriptor chain with a length equals to the queue size; total_sg == vq->packed.vring.num. Let’s assume the following situation: vq->packed.vring.num=4 vq->packed.next_avail_idx: 1 vq->packed.avail_wrap_counter: 0 Then the driver adds a descriptor chain containing 4 descriptors. We expect the following result with avail_wrap_counter flipped: vq->packed.next_avail_idx: 1 vq->packed.avail_wrap_counter: 1 But, the current implementation gives the following result: vq->packed.next_avail_idx: 1 vq->packed.avail_wrap_counter: 0 To reproduce the bug, you can set a packed queue size as small as possible, so that the driver is more likely to provide a descriptor chain with a length equal to the packed queue size. For example, in qemu run following commands: sudo qemu-system-x86_64 \ -enable-kvm \ -nographic \ -kernel "path/to/kernel_image" \ -m 1G \ -drive file="path/to/rootfs",if=none,id=disk \ -device virtio-blk,drive=disk \ -drive file="path/to/disk_image",if=none,id=rwdisk \ -device virtio-blk,drive=rwdisk,packed=on,queue-size=4,\ indirect_desc=off \ -append "console=ttyS0 root=/dev/vda rw init=/bin/bash" Inside the VM, create a directory and mount the rwdisk device on it. The rwdisk will hang and mount operation will not complete. This commit fixes the wrap counter error by flipping the packed.avail_wrap_counter, when start of descriptor chain equals to the end of descriptor chain (head == i). Fixes: 1ce9e605 ("virtio_ring: introduce packed ring support") Signed-off-by: Yuan Yao <yuanyaogoog@chromium.org> Message-Id: <20230808051110.3492693-1-yuanyaogoog@chromium.org> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Jason Wang authored
We try to build affinity mask via create_affinity_masks() unconditionally which may lead several issues: - the affinity mask is not used for parent without affinity support (only VDUSE support the affinity now) - the logic of create_affinity_masks() might not work for devices other than block. For example it's not rare in the networking device where the number of queues could exceed the number of CPUs. Such case breaks the current affinity logic which is based on group_cpus_evenly() who assumes the number of CPUs are not less than the number of groups. This can trigger a warning[1]: if (ret >= 0) WARN_ON(nr_present + nr_others < numgrps); Fixing this by only build the affinity masks only when - Driver passes affinity descriptor, driver like virtio-blk can make sure to limit the number of queues when it exceeds the number of CPUs - Parent support affinity setting config ops This help to avoid the warning. More optimizations could be done on top. [1] [ 682.146655] WARNING: CPU: 6 PID: 1550 at lib/group_cpus.c:400 group_cpus_evenly+0x1aa/0x1c0 [ 682.146668] CPU: 6 PID: 1550 Comm: vdpa Not tainted 6.5.0-rc5jason+ #79 [ 682.146671] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [ 682.146673] RIP: 0010:group_cpus_evenly+0x1aa/0x1c0 [ 682.146676] Code: 4c 89 e0 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc e8 1b c4 74 ff 48 89 ef e8 13 ac 98 ff 4c 89 e7 45 31 e4 e8 08 ac 98 ff eb c2 <0f> 0b eb b6 e8 fd 05 c3 00 45 31 e4 eb e5 cc cc cc cc cc cc cc cc [ 682.146679] RSP: 0018:ffffc9000215f498 EFLAGS: 00010293 [ 682.146682] RAX: 000000000001f1e0 RBX: 0000000000000041 RCX: 0000000000000000 [ 682.146684] RDX: ffff888109922058 RSI: 0000000000000041 RDI: 0000000000000030 [ 682.146686] RBP: ffff888109922058 R08: ffffc9000215f498 R09: ffffc9000215f4a0 [ 682.146687] R10: 00000000000198d0 R11: 0000000000000030 R12: ffff888107e02800 [ 682.146689] R13: 0000000000000030 R14: 0000000000000030 R15: 0000000000000041 [ 682.146692] FS: 00007fef52315740(0000) GS:ffff888237380000(0000) knlGS:0000000000000000 [ 682.146695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 682.146696] CR2: 00007fef52509000 CR3: 0000000110dbc004 CR4: 0000000000370ee0 [ 682.146698] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 682.146700] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 682.146701] Call Trace: [ 682.146703] <TASK> [ 682.146705] ? __warn+0x7b/0x130 [ 682.146709] ? group_cpus_evenly+0x1aa/0x1c0 [ 682.146712] ? report_bug+0x1c8/0x1e0 [ 682.146717] ? handle_bug+0x3c/0x70 [ 682.146721] ? exc_invalid_op+0x14/0x70 [ 682.146723] ? asm_exc_invalid_op+0x16/0x20 [ 682.146727] ? group_cpus_evenly+0x1aa/0x1c0 [ 682.146729] ? group_cpus_evenly+0x15c/0x1c0 [ 682.146731] create_affinity_masks+0xaf/0x1a0 [ 682.146735] virtio_vdpa_find_vqs+0x83/0x1d0 [ 682.146738] ? __pfx_default_calc_sets+0x10/0x10 [ 682.146742] virtnet_find_vqs+0x1f0/0x370 [ 682.146747] virtnet_probe+0x501/0xcd0 [ 682.146749] ? vp_modern_get_status+0x12/0x20 [ 682.146751] ? get_cap_addr.isra.0+0x10/0xc0 [ 682.146754] virtio_dev_probe+0x1af/0x260 [ 682.146759] really_probe+0x1a5/0x410 Fixes: 3dad5682 ("virtio-vdpa: Support interrupt affinity spreading mechanism") Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230811091539.1359865-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Xuan Zhuo authored
Currently, the virtio core will perform a dma operation for each buffer. Although, the same page may be operated multiple times. This patch, the driver does the dma operation and manages the dma address based the feature premapped of virtio core. This way, we can perform only one dma operation for the pages of the alloc frag. This is beneficial for the iommu device. kernel command line: intel_iommu=on iommu.passthrough=0 | strict=0 | strict=1 Before | 775496pps | 428614pps After | 1109316pps | 742853pps Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20230810123057.43407-13-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Xuan Zhuo authored
These API has been introduced: * virtqueue_dma_need_sync * virtqueue_dma_sync_single_range_for_cpu * virtqueue_dma_sync_single_range_for_device These APIs can be used together with the premapped mechanism to sync the DMA address. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20230810123057.43407-12-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Xuan Zhuo authored
Added virtqueue_dma_map_api* to map DMA addresses for virtual memory in advance. The purpose is to keep memory mapped across multiple add/get buf operations. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20230810123057.43407-11-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Xuan Zhuo authored
Introduce virtqueue_reset() to release all buffer inside vq. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230810123057.43407-10-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Xuan Zhuo authored
The subsequent reset function will reuse these logic. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230810123057.43407-9-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Xuan Zhuo authored
Modify the "useless" to a more accurate "unused". Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230810123057.43407-8-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Xuan Zhuo authored
Now we add a case where we skip dma unmap, the vq->premapped is true. We can't just rely on use_dma_api to determine whether to skip the dma operation. For convenience, I introduced the "do_unmap". By default, it is the same as use_dma_api. If the driver is configured with premapped, then do_unmap is false. So as long as do_unmap is false, for addr of desc, we should skip dma unmap operation. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20230810123057.43407-7-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Xuan Zhuo authored
Added virtqueue_dma_dev() to get DMA device for virtio. Then the caller can do dma operation in advance. The purpose is to keep memory mapped across multiple add/get buf operations. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230810123057.43407-6-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Xuan Zhuo authored
If the vq is the premapped mode, use the sg_dma_address() directly. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20230810123057.43407-5-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Xuan Zhuo authored
This helper allows the driver change the dma mode to premapped mode. Under the premapped mode, the virtio core do not do dma mapping internally. This just work when the use_dma_api is true. If the use_dma_api is false, the dma options is not through the DMA APIs, that is not the standard way of the linux kernel. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20230810123057.43407-4-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Xuan Zhuo authored
This patch put the dma addr error check in vring_map_one_sg(). The benefits of doing this: 1. reduce one judgment of vq->use_dma_api. 2. make vring_map_one_sg more simple, without calling vring_mapping_error to check the return value. simplifies subsequent code Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230810123057.43407-3-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Xuan Zhuo authored
Inside detach_buf_split(), if use_dma_api is false, vring_unmap_one_split_indirect will be called many times, but actually nothing is done. So this patch check use_dma_api firstly. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230810123057.43407-2-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Eugenio Pérez authored
Start offering the feature in the simulator. Other parent drivers can follow this code to offer it too. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Message-Id: <20230609092127.170673-5-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Eugenio Pérez authored
This operation allow vdpa parent to expose its own backend feature bits. Next patches introduce a feature not compatible with all parent drivers: the ability to enable vq after driver_ok. Each parent must declare if it allows it or not. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Message-Id: <20230609092127.170673-4-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Eugenio Pérez authored
Accepting VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK backend feature if userland sets it. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Message-Id: <20230609092127.170673-3-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Eugenio Pérez authored
This feature flag allows the driver enabling virtqueues both before and after DRIVER_OK. This is needed for software assisted live migration, so userland can restore the device status in devices with control virtqueue before the dataplane is enabled. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Message-Id: <20230609092127.170673-2-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Yue Haibing authored
Commit 29064bfd ("vdpa/mlx5: Add support library for mlx5 VDPA implementation") declared but never implemented these. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Message-Id: <20230803143041.23388-1-yuehaibing@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
- 27 Aug, 2023 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Three small driver fixes and one larger unused function set removal in the raid class (so no external impact)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: snic: Fix double free in snic_tgt_create() scsi: core: raid_class: Remove raid_component_add() scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5 scsi: ufs: mcq: Fix the search/wrap around logic
-
- 26 Aug, 2023 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Fix an FPU invalidation bug on exec(), and fix a performance regression due to a missing setting of X86_FEATURE_OSXSAVE" * tag 'x86-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Set X86_FEATURE_OSXSAVE feature after enabling OSXSAVE in CR4 x86/fpu: Invalidate FPU state correctly on exec()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A last minute fix for a regression introduced in the v6.5 merge window. The conversion of the software based interrupt resend mechanism to hlist missed to add a check whether the descriptor is already enqueued and dropped the interrupt descriptor lookup for nested interrupts. The missing check whether the descriptor is already queued causes hlist corruption and can be observed in the wild. The dropped parent descriptor lookup has not yet caused problems, but it would result in stale interrupt line in the worst case. Add the missing enqueued check and bring the descriptor lookup back to cure this" * tag 'irq-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix software resend lockup and nested resend
-
Linus Torvalds authored
Merge tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix a ptrace bug, a hw_breakpoint bug, some build errors/warnings and some trivial cleanups" * tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Fix hw_breakpoint_control() for watchpoints LoongArch: Ensure FP/SIMD registers in the core dump file is up to date LoongArch: Put the body of play_dead() into arch_cpu_idle_dead() LoongArch: Add identifier names to arguments of die() declaration LoongArch: Return earlier in die() if notify_die() returns NOTIFY_STOP LoongArch: Do not kill the task in die() if notify_die() returns NOTIFY_STOP LoongArch: Remove <asm/export.h> LoongArch: Replace #include <asm/export.h> with #include <linux/export.h> LoongArch: Remove unneeded #include <asm/export.h> LoongArch: Replace -ffreestanding with finer-grained -fno-builtin's LoongArch: Remove redundant "source drivers/firmware/Kconfig"
-
Johan Hovold authored
The switch to using hlist for managing software resend of interrupts broke resend in at least two ways: First, unconditionally adding interrupt descriptors to the resend list can corrupt the list when the descriptor in question has already been added. This causes the resend tasklet to loop indefinitely with interrupts disabled as was recently reported with the Lenovo ThinkPad X13s after threaded NAPI was disabled in the ath11k WiFi driver. This bug is easily fixed by restoring the old semantics of irq_sw_resend() so that it can be called also for descriptors that have already been marked for resend. Second, the offending commit also broke software resend of nested interrupts by simply discarding the code that made sure that such interrupts are retriggered using the parent interrupt. Add back the corresponding code that adds the parent descriptor to the resend list. Fixes: bc06a9e0 ("genirq: Use hlist for managing resend handlers") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/lkml/20230809073432.4193-1-johan+linaro@kernel.org/ Link: https://lore.kernel.org/r/20230826154004.1417-1-johan+linaro@kernel.org
-
Huacai Chen authored
In hw_breakpoint_control(), encode_ctrl_reg() has already encoded the MWPnCFG3_LoadEn/MWPnCFG3_StoreEn bits in info->ctrl. We don't need to add (1 << MWPnCFG3_LoadEn | 1 << MWPnCFG3_StoreEn) unconditionally. Otherwise we can't set read watchpoint and write watchpoint separately. Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
-
Huacai Chen authored
This is a port of commit 379eb01c ("riscv: Ensure the value of FP registers in the core dump file is up to date"). The values of FP/SIMD registers in the core dump file come from the thread.fpu. However, kernel saves the FP/SIMD registers only before scheduling out the process. If no process switch happens during the exception handling, kernel will not have a chance to save the latest values of FP/SIMD registers. So it may cause their values in the core dump file incorrect. To solve this problem, force fpr_get()/simd_get() to save the FP/SIMD registers into the thread.fpu if the target task equals the current task. Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "One clk driver fix and two clk framework fixes: - Fix an OOB access when devm_get_clk_from_child() is used and devm_clk_release() casts the void pointer to the wrong type - Move clk_rate_exclusive_{get,put}() within the correct ifdefs in clk.h so that the stubs are used when CONFIG_COMMON_CLK=n - Register the proper clk provider function depending on the value of #clock-cells in the TI keystone driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Fix slab-out-of-bounds error in devm_clk_release() clk: Fix undefined reference to `clk_rate_exclusive_{get,put}' clk: keystone: syscon-clk: Fix audio refclk
-
- 25 Aug, 2023 12 commits
-
-
Helge Deller authored
The gcc compiler translates on some architectures the 64-bit __builtin_clzll() function to a call to the libgcc function __clzdi2(), which should take a 64-bit parameter on 32- and 64-bit platforms. But in the current kernel code, the built-in __clzdi2() function is defined to operate (wrongly) on 32-bit parameters if BITS_PER_LONG == 32, thus the return values on 32-bit kernels are in the range from [0..31] instead of the expected [0..63] range. This patch fixes the in-kernel functions __clzdi2() and __ctzdi2() to take a 64-bit parameter on 32-bit kernels as well, thus it makes the functions identical for 32- and 64-bit kernels. This bug went unnoticed since kernel 3.11 for over 10 years, and here are some possible reasons for that: a) Some architectures have assembly instructions to count the bits and which are used instead of calling __clzdi2(), e.g. on x86 the bsr instruction and on ppc cntlz is used. On such architectures the wrong __clzdi2() implementation isn't used and as such the bug has no effect and won't be noticed. b) Some architectures link to libgcc.a, and the in-kernel weak functions get replaced by the correct 64-bit variants from libgcc.a. c) __builtin_clzll() and __clzdi2() doesn't seem to be used in many places in the kernel, and most likely only in uncritical functions, e.g. when printing hex values via seq_put_hex_ll(). The wrong return value will still print the correct number, but just in a wrong formatting (e.g. with too many leading zeroes). d) 32-bit kernels aren't used that much any longer, so they are less tested. A trivial testcase to verify if the currently running 32-bit kernel is affected by the bug is to look at the output of /proc/self/maps: Here the kernel uses a correct implementation of __clzdi2(): root@debian:~# cat /proc/self/maps 00010000-00019000 r-xp 00000000 08:05 787324 /usr/bin/cat 00019000-0001a000 rwxp 00009000 08:05 787324 /usr/bin/cat 0001a000-0003b000 rwxp 00000000 00:00 0 [heap] f7551000-f770d000 r-xp 00000000 08:05 794765 /usr/lib/hppa-linux-gnu/libc.so.6 ... and this kernel uses the broken implementation of __clzdi2(): root@debian:~# cat /proc/self/maps 0000000010000-0000000019000 r-xp 00000000 000000008:000000005 787324 /usr/bin/cat 0000000019000-000000001a000 rwxp 000000009000 000000008:000000005 787324 /usr/bin/cat 000000001a000-000000003b000 rwxp 00000000 00:00 0 [heap] 00000000f73d1000-00000000f758d000 r-xp 00000000 000000008:000000005 794765 /usr/lib/hppa-linux-gnu/libc.so.6 ... Signed-off-by: Helge Deller <deller@gmx.de> Fixes: 4df87bb7 ("lib: add weak clz/ctz functions") Cc: Chanho Min <chanho.min@lge.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2023-08-25-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "18 hotfixes. 13 are cc:stable and the remainder pertain to post-6.4 issues or aren't considered suitable for a -stable backport" * tag 'mm-hotfixes-stable-2023-08-25-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: shmem: fix smaps BUG sleeping while atomic selftests: cachestat: catch failing fsync test on tmpfs selftests: cachestat: test for cachestat availability maple_tree: disable mas_wr_append() when other readers are possible madvise:madvise_free_pte_range(): don't use mapcount() against large folio for sharing check madvise:madvise_free_huge_pmd(): don't use mapcount() against large folio for sharing check madvise:madvise_cold_or_pageout_pte_range(): don't use mapcount() against large folio for sharing check mm: multi-gen LRU: don't spin during memcg release mm: memory-failure: fix unexpected return value in soft_offline_page() radix tree: remove unused variable mm: add a call to flush_cache_vmap() in vmap_pfn() selftests/mm: FOLL_LONGTERM need to be updated to 0x100 nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers() mm/gup: handle cont-PTE hugetlb pages correctly in gup_must_unshare() via GUP-fast selftests: cgroup: fix test_kmem_basic less than error mm: enable page walking API to lock vmas during the walk smaps: use vm_normal_page_pmd() instead of follow_trans_huge_pmd() mm/gup: reintroduce FOLL_NUMA as FOLL_HONOR_NUMA_FAULT
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: "This is obviously not ideal, particularly for something this late in the cycle. Unfortunately we found some uABI issues in the vector support while reviewing the GDB port, which has triggered a revert -- probably a good sign we should have reviewed GDB before merging this, I guess I just dropped the ball because I was so worried about the context extension and libc suff I forgot. Hence the late revert. There's some risk here as we're still exposing the vector context for signal handlers, but changing that would have meant reverting all of the vector support. The issues we've found so far have been fixed already and they weren't absolute showstoppers, so we're essentially just playing it safe by holding ptrace support for another release (or until we get through a proper userspace code review). Summary: - The vector ucontext extension has been extended with vlenb - The vector registers ELF core dump note type has been changed to avoid aliasing with the CSR type used in embedded systems - Support for accessing vector registers via ptrace() has been reverted - Another build fix for the ISA spec changes around Zifencei/Zicsr that manifests on some systems built with binutils-2.37 and gcc-11.2" * tag 'riscv-for-linus-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix build errors using binutils2.37 toolchains RISC-V: vector: export VLENB csr in __sc_riscv_v_state RISC-V: Remove ptrace support for vectors
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: - fix an irq mapping leak in gpio-sim - associate the GPIO device's software node with the irq domain in gpio-sim * tag 'gpio-fixes-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: sim: pass the GPIO device's software node to irq domain gpio: sim: dispose of irq mappings before destroying the irq_sim domain
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "Here are some Renesas and AMD driver fixes, the AMD fix affects important laptops in the wild so this one is pretty important. It seems a bit tough to get this right. - Fix DT parsing and related locking in the Renesas driver. - Fix wakeup IRQs in the AMD driver once again. Really tricky this one" * tag 'pinctrl-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: amd: Mask wake bits on probe again pinctrl: renesas: rza2: Add lock around pinctrl_generic{{add,remove}_group,{add,remove}_function} pinctrl: renesas: rzv2m: Fix NULL pointer dereference in rzv2m_dt_subnode_to_map() pinctrl: renesas: rzg2l: Fix NULL pointer dereference in rzg2l_dt_subnode_to_map()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Hopefully the last bits for 6.5. It's slightly higher LOCs than wished, but it doesn't look scary. The biggest change is MAINTAINERS update for TI; it's good to have the update before the final release, so that people can contact to the right persons for bug reports (which shouldn't happen of course!) The rest are all device-specific fixes and quirks, most for various ASoC platforms" * tag 'sound-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: amd: yc: Fix a non-functional mic on Lenovo 82SJ ALSA: ymfpci: Fix the missing snd_card_free() call at probe error ASoC: cs35l41: Correct amp_gain_tlv values ASoC: amd: yc: Add VivoBook Pro 15 to quirks list for acp6x ASoC: tas2781: fixed register access error when switching to other chips ASoC: cs35l56: Add an ACPI match table ASoC: cs35l56: Read firmware uuid from a device property instead of _SUB ASoC: SOF: ipc4-pcm: fix possible null pointer deference MAINTAINERS: Add entries for TEXAS INSTRUMENTS ASoC DRIVERS
-
Tiezhu Yang authored
The initial aim is to silence the following objtool warning: arch/loongarch/kernel/process.o: warning: objtool: arch_cpu_idle_dead() falls through to next function start_thread() According to tools/objtool/Documentation/objtool.txt, this is because the last instruction of arch_cpu_idle_dead() is a call to a noreturn function play_dead(). In order to silence the warning, one simple way is to add the noreturn function play_dead() to objtool's hard-coded global_noreturns array, that is to say, just put "NORETURN(play_dead)" into tools/objtool/noreturns.h, it works well. But I noticed that play_dead() is only defined once and only called by arch_cpu_idle_dead(), so put the body of play_dead() into the caller arch_cpu_idle_dead(), then remove the noreturn function play_dead() is an alternative way which can reduce the overhead of the function call at the same time. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
-
Tiezhu Yang authored
Add identifier names to arguments of die() declaration in ptrace.h to fix the following checkpatch warnings: WARNING: function definition argument 'const char *' should also have an identifier name WARNING: function definition argument 'struct pt_regs *' should also have an identifier name Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
-
Tiezhu Yang authored
After the call to oops_exit(), it should not panic or execute the crash kernel if the oops is to be suppressed. Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
-
Tiezhu Yang authored
If notify_die() returns NOTIFY_STOP, honor the return value from the handler chain invocation in die() and return without killing the task as, through a debugger, the fault may have been fixed. It makes sense even if ignoring the event will make the system unstable: by allowing access through a debugger it has been compromised already anyway. It makes our port consistent with x86, arm64, riscv and csky. Commit 20c0d2d4 ("[PATCH] i386: pass proper trap numbers to die chain handlers") may be the earliest of similar changes. Link: https://lore.kernel.org/r/43DDF02E.76F0.0078.0@novell.com/Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
-
Masahiro Yamada authored
All *.S files under arch/loongarch/ have been converted to include <linux/export.h> instead of <asm/export.h>. Remove <asm/export.h>. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
-
Masahiro Yamada authored
Commit ddb5cdba ("kbuild: generate KSYMTAB entries by modpost") deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>. Replace #include <asm/export.h> with #include <linux/export.h>. After all the <asm/export.h> lines are converted, <asm/export.h> and <asm-generic/export.h> will be removed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
-