- 23 Jan, 2022 40 commits
-
-
Eugen Hristev authored
The ispck is not used for sama7g5 variant of the ISC. Calls to ispck have to be removed also from module insert/removal. Fixes: d7f26849 ("media: atmel: fix the ispck initialization") Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Eugen Hristev authored
To have consistency with future media controller development, replace the video device name with KBUILD_MODNAME. Signed-off-by:
-
Eugen Hristev authored
The atmel-isc-base is getting crowded. Split the clock functions into atmel-isc-clk.c. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Eugen Hristev authored
Microchip CSI2DC (CSI2 Demultiplexer Controller) is a misc bridge device that converts a byte stream in IDI Synopsys format (coming from a CSI2HOST) to a pixel stream that can be captured by a sensor controller. Signed-off-by:
-
Eugen Hristev authored
Add bindings documentation for Microchip CSI2 Demultiplexer controller. CSI2DC is a demultiplexer from Synopsys IDI interface specification to parallel interface connection or direct memory access. CSI2DC can also act as a parallel bypass from a parallel sensor to the image sensor controller/interface. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Eugen Hristev authored
Add Microchip CSI2DC driver in the list. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Alain Volmat authored
Prior to submitting a transfer to the DMA, the client should first check the capabilities of the DMA channel in term of maximum of each segment. This is given by the max_sg_burst value reported by dma_get_slave_caps API. Based on that, if the transfer is larger than what can be handled by the DMA channel, we split the transfer into several scatterlist elements. [hverkuil: fix checkpatch parenthesis alignment warning] Signed-off-by:
Alain Volmat <alain.volmat@foss.st.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only array range on the stack but instead it static. Also makes the object code a little smaller. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only array probe_ports on the stack but instead it static const. Also makes the object code a little smaller. Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only array regs_to_read on the stack but instead it static const. Also makes the object code a little smaller. Signed-off-by:
-
Ondrej Zary authored
Commit 21615365 ("media: media/pci: set device_caps in struct video_device") introduced a regression: V4L2_CAP_TUNER is always present in device_caps, even when the device has no tuner. This causes a warning: WARNING: CPU: 0 PID: 249 at drivers/media/v4l2-core/v4l2-ioctl.c:1102 v4l_querycap+0xa0/0xb0 [videodev] Fixes: 21615365 ("media: media/pci: set device_caps in struct video_device") Signed-off-by:
Ondrej Zary <linux@zary.sk> Signed-off-by:
-
Ming Qian authored
V4L2_PIX_FMT_NV12 requires num_planes equals to 1, V4L2_PIX_FMT_NV12M requires num_planes equals to 2. and mxc-jpeg supports 2 planes for nv12, so we should use 4L2_PIX_FMT_NV12M instead of V4L2_PIX_FMT_NV12, otherwise it will confuses gstreamer and prevent encoding and decoding. Signed-off-by:
Ming Qian <ming.qian@nxp.com> Signed-off-by:
Shijie Qin <shijie.qin@nxp.com> Signed-off-by:
Zhou Peng <eagle.zhou@nxp.com> Reviewed-by:
Mirela Rabulea <mirela.rabulea@oss.nxp.com> Signed-off-by:
-
Johan Hovold authored
Drivers should generally not print anything for a successful probe, and printing "success" before probe is done makes no sense. Drop the unnecessary and misleading dev_info() call from probe. Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Johan Hovold authored
The driver allocates and registers two platform device structures during probe, but the devices were never deregistered on driver unbind. This results in a use-after-free on driver unbind as the device structures were allocated using devres and would be freed by driver core when remove() returns. Fix this by adding the missing deregistration calls to the remove() callback and failing probe on registration errors. Note that the platform device structures must be freed using a proper release callback to avoid leaking associated resources like device names. Fixes: 479f7a11 ("[media] davinci: vpif: adaptions for DT support") Cc: stable@vger.kernel.org # 4.12 Cc: Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Johan Hovold authored
Make sure to disable runtime PM before returning on probe errors. Fixes: 479f7a11 ("[media] davinci: vpif: adaptions for DT support") Cc: stable@vger.kernel.org Cc: Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Johan Hovold authored
Make sure to balance the runtime PM usage counter on driver unbind. Fixes: 407ccc65 ("[media] davinci: vpif: add pm_runtime support") Cc: stable@vger.kernel.org # 3.9 Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Zhuohao Lee authored
The Google Brask device uses the same approach as the Google Fizz which enables the HDMI CEC via the cros-ec-cec driver. Signed-off-by:
Zhuohao Lee <zhuohao@chromium.org> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
-
Yang Guang authored
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
David Yang <davidcomponentone@gmail.com> Signed-off-by:
Yang Guang <yang.guang5@zte.com.cn> Signed-off-by:
-
Martin Kepplinger authored
during system resume, interconnect bandwidth would currently be requested even though the device is runtime suspended. This leaves the system in an unbalanced state. Fix that by only doing that in runtimem pm and splitting up runtime and system suspend to be a more readable: imx8mq_mipi_csi_pm_*() does the generic things called from system- and runtime functions that each do specific things on top. Fixes: f33fd8d7 ("media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller") Signed-off-by:
Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by:
-
Martin Kepplinger authored
The place where this register writel() that masks one interrupt is placed does not guarantee that the device is powered so that's not allowed. Moreover imx8mq_mipi_csi_start_stream() masks the interrupt anyway so the write is not even needed. Remove it as this is a mistake that slipped in with the driver. Fixes: f33fd8d7 ("media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller") Signed-off-by:
-
Jiasheng Jiang authored
The return value of devm_kzalloc() needs to be checked. To avoid use of null pointer in case of thefailure of alloc. Fixes: 46233e91 ("media: mtk-vcodec: move firmware implementations into their own files") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by:
Tzung-Bi Shih <tzungbi@google.com> Signed-off-by:
-
Chen-Yu Tsai authored
DST_QUEUE_OFF_BASE is applied to offset/mem_offset on MMAP capture buffers only for the VIDIOC_QUERYBUF ioctl, while the userspace fields (including offset/mem_offset) are filled in for VIDIOC_{QUERY,PREPARE,Q,DQ}BUF ioctls. This leads to differences in the values presented to userspace. If userspace attempts to mmap the capture buffer directly using values from DQBUF, it will fail. Move the code that applies the magic offset into a helper, and call that helper from all four ioctl entry points. [hverkuil: drop unnecessary '= 0' in v4l2_m2m_querybuf() for ret] Fixes: 7f98639d ("V4L/DVB: add memory-to-memory device helper framework for videobuf") Fixes: 908a0d7c ("[media] v4l: mem2mem: port to videobuf2") Signed-off-by:Chen-Yu Tsai <wenst@chromium.org> Signed-off-by:
-
Chen-Yu Tsai authored
The specification for VIDIOC_DQBUF is slightly ambiguous on what fields of |struct v4l2_buffer| is filled by the driver. Reword it so things are clear: the driver fills in all remaining fields not specified to be filled in by userspace applications. Signed-off-by:
-
Deborah Brouwer authored
The error injection controls that test wrap-around sequence and timestamp counters were partially broken. Add a menu option for 64 or 32 bit signed timestamp wrapping. Prevent the timestamp from wrapping around before the device can be tested. Remove the sequence count from the timestamp calculation so that sequence wrapping does not interfere with the timestamp. Add consistent time and sequence wrapping to sdr and touch devices. Signed-off-by:
Deborah Brouwer <deborahbrouwer3563@gmail.com> Signed-off-by:
-
Dafna Hirschfeld authored
Currently capturing grey format produces page faults on both selfpath and mainpath. To support greyscale we can capture YUV422 planar format and configure the U, V buffers to the dummy buffer. Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by:
-
Laurent Pinchart authored
When multiple CSIS instances are present in a single graph, they are currently all named "imx7-mipi-csis.0", which breaks the entity name uniqueness requirement. Fix it by using the device name to create the subdev name. Fixes: 7807063b ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7") Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Jerome Brunet <jbrunet@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> # On i.MX8MP Signed-off-by:
-
Laurent Pinchart authored
Add two debugfs files, ths_settle and tclk_settle, to allow overriding the corresponding timing parameters for test purpose. Signed-off-by:
-
Laurent Pinchart authored
The frame counter is useful debugging information, add it to the register dump printed by mipi_csis_dump_regs(). Signed-off-by:
-
Bryan O'Donoghue authored
Similar to the SM8250 the CSID relies on the VFE to be clocked prior to taking the CSID out of reset. Apply the same fixup to SDM845 as SM8250. Suggested-by:
Robert Foss <robert.foss@linaro.org> Tested-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
-
Bryan O'Donoghue authored
The sm8250 CAMSS CSID depends on the VFE it is attached to being powered on and clocked prior to taking the CSID out of reset. It is possible to open just the CSID subdev from libcamera and attempt to bring the CSID block up. If we do not first bring up the VFE the CSID will fail to come out of reset. Tested-by:
Julian Grahsl <jgrahsl@snap.com> Signed-off-by:
-
Bryan O'Donoghue authored
Downstream makes some pretty explicit comments about voting for bus bandwidth prior to camcc_camnoc_axi_clk_src. Working with camx downstream also shows that the bandwidth vote is required to get that root clock working. Add a simple mechanism to declare set and unset named NOCs. Whereas the objective is to enable the sm8250 specifically the code has been implemented to allow setting of whatever NOCs different SoCs using this driver may require. Tested-by:
-
Jonathan Marek authored
The Titan 480 camss found on SM8250 has 6 CSIPHY and 4 VFE/CSID. CSID is compatible with the Titan 170 CSID, but the Titan 480 CSID are inside the VFE region (between the "top" and "bus" registers), so a workaround is added to avoid ioremap failure. [bod] Fixed setting camnoc_axi_clk_src instead of camcc_camnoc_axi_clk [jgrahsl, bod] Add slow_ahb_src clock values [jgrahsl, bod] Add cpa_ahb clock values Signed-off-by:
Jonathan Marek <jonathan@marek.ca> Tested-by:
-
Jonathan Marek authored
Add this common format to the various format lists relevant to sdm845. Signed-off-by:
-
Jonathan Marek authored
Add support for VFE found on SM8250 (Titan 480). This implementation is based on the titan 170 implementation. It supports the normal and lite VFE, and only supports the RDI0 capture path. [bod: Updates hw_version callback] [bod: Use static inline for macros reusing parameters checkpatch --strict] Signed-off-by:
-
Jonathan Marek authored
This function waits for halt_complete but doesn't do anything to cause it to complete, and always hits the "VFE halt timeout" error. Just delete this code for now. Fixes: 7319cdf1 ("media: camss: Add support for VFE hardware version Titan 170") Signed-off-by:
-
Jonathan Marek authored
vfe->id isn't set yet, so use "id" instead here. Signed-off-by:
-
Jonathan Marek authored
This isn't used and only works because devm_regulator_get() returns a dummy regulator. Signed-off-by:
-
Jonathan Marek authored
At least for titan HW, CSID don't have an associated regulator. This change is necessary to be able to model this in the CSID resources. Signed-off-by:
-
Jonathan Marek authored
Use the "HALT_CMD_RESUME_AT_FRAME_BOUNDARY" define instead of a "1" which is otherwise confusing, and add a "HALT_CMD_HALT_AT_FRAME_BOUNDARY" which is set when disabling. Fixes: eebe6d00 ("media: camss: Add support for CSID hardware version Titan 170") Signed-off-by:
-
Jonathan Marek authored
Change the IS_LITE condition so that it returns true for the second lite vfe found on titan 480 hardware (8250), which will have id == 3. Signed-off-by:
-
