- 15 Sep, 2022 3 commits
-
-
Markus Reichl authored
Add avdd-0v9-supply and avdd-1v8-supply to hdmi node for rk3399-roc-pc to silence dmesg warning and match the name of the 1v8 supply to the circuit sheet. Signed-off-by:
Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/20220915111138.1108-1-m.reichl@fivetechno.deSigned-off-by:
Heiko Stuebner <heiko@sntech.de>
-
Brian Norris authored
The Gru-Scarlet family includes a variety of SKU identifiers, using parts of a 3-bit space {0..7}. SKU2 and SKU4 devices (under a few different manufacturer names) also use the Innolux display. Without this, a SKU2 device may non-deterministically (depending on the matching order of DTBs and bootloader behavior) select either one of the INX DTBs (rk3399-gru-scarlet-dumo.dtb or rk3399-gru-scarlet-inx.dtb) or the KingDisplay DTB (rk3399-gru-scarlet-kd.dtb), to ill effect. For reference, the original vendor tree source: CHROMIUM: arm64: dts: rockchip: add sku{0,2,4} compatibility https://chromium.googlesource.com/chromiumos/third_party/kernel/+/f6ed665c9e2eb37fb2680debbb36ec9fb0e8fb97 CHROMIUM: arm64: dts: rockchip: scarlet: add SKU0 device tree https://chromium.googlesource.com/chromiumos/third_party/kernel/+/9987c8776f4b087d135d761e59f7fa6cc83fc7fcSigned-off-by:Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20220817123350.2.I5f4fd0808a927b08e267c189712fb4a85931fd3b@changeidSigned-off-by:
-
Brian Norris authored
The Gru-Scarlet family includes a variety of SKU identifiers, using parts of a 3-bit space {0..7}. SKU2 and SKU4 devices (under a few different manufacturer names) also use the Innolux display. For reference, the original vendor tree source: CHROMIUM: arm64: dts: rockchip: add sku{0,2,4} compatibility https://chromium.googlesource.com/chromiumos/third_party/kernel/+/f6ed665c9e2eb37fb2680debbb36ec9fb0e8fb97 CHROMIUM: arm64: dts: rockchip: scarlet: add SKU0 device tree https://chromium.googlesource.com/chromiumos/third_party/kernel/+/9987c8776f4b087d135d761e59f7fa6cc83fc7fcSigned-off-by:
-
- 14 Sep, 2022 2 commits
-
-
Hugh Cole-Baker authored
Define the memory region on RK3399 VOPs containing the gamma LUT at base+0x2000. Signed-off-by:
Hugh Cole-Baker <sigmaris@gmail.com> Tested-by:
Linus Heckemann <git@sphalerite.org> Link: https://lore.kernel.org/r/20211019215843.42718-4-sigmaris@gmail.comSigned-off-by:
-
Furkan Kardame authored
Add the device tree nodes to enable video output on the Station M2. Enable the GPU and HDMI nodes and fix the GPU regulator range. Signed-off-by:
Furkan Kardame <f.kardame@manjaro.org> Link: https://lore.kernel.org/r/20220627202208.45770-1-f.kardame@manjaro.orgSigned-off-by:
-
- 09 Sep, 2022 13 commits
-
-
Judy Hsiao authored
We discoverd that the state of BCLK on, LRCLK off and SD_MODE on may cause the speaker melting issue. Removing LRCLK while BCLK is present can cause unexpected output behavior including a large DC output voltage as described in the Max98357a datasheet. In order to: 1. prevent BCLK from turning on by other component. 2. keep BCLK and LRCLK being present at the same time This patch adjusts the device tree to allow BCLK to switch to GPIO func before LRCLK output, and switch back during LRCLK is output. Signed-off-by:
Judy Hsiao <judyhsiao@chromium.org> Reviewed-by:
-
Nicolas Frattaroli authored
The RK3566 and RK3568 come with a dedicated Hantro instance solely for encoding. This patch adds a node for this to the device tree, along with a node for its MMU. Signed-off-by:
Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Link: https://lore.kernel.org/r/20220612155346.16288-4-frattaroli.nicolas@gmail.comSigned-off-by:
-
Piotr Oniszczuk authored
RK356x has Hantro G1 video decoder capable to decode MPEG2/H.264/VP8 video formats. This patch enables RK356x video decoder in RK356x device-tree include. Tested on [1] with FFmpeg v4l2_request code taken from [2] with MPEG2, H.642 and VP8 samples with results [3]. [1] https://github.com/warpme/minimyth2 [2] https://github.com/LibreELEC/LibreELEC.tv/blob/master/packages/multimedia/ffmpeg/patches/v4l2-request/ffmpeg-001-v4l2-request.patch [3] https://github.com/warpme/minimyth2/blob/master/video-test-summary.txtSigned-off-by:
Piotr Oniszczuk <piotr.oniszczuk@gmail.com> Reviewed-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Link: https://lore.kernel.org/r/20220214212955.1178947-2-piotr.oniszczuk@gmail.comSigned-off-by:
-
Chukun Pan authored
Add the nodes to enable the PCIe controller on the Radxa ROCK3 Model A board. Run test with the MT7921 pcie wireless card. Signed-off-by:
Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20220726023516.6487-1-amadeus@jmu.edu.cnSigned-off-by:
-
Chukun Pan authored
Add devicetree node for hym8563 rtc to Radxa ROCK3 Model A board. Signed-off-by:
-
Nicolas Frattaroli authored
This adds the regulator node to the quartz64-b device tree, and enables the PCIe 2 controller and combphy for it. Signed-off-by:
-
Chris Morgan authored
Anbernic RG353P and RG503 are both RK3566 based handheld gaming devices from Anbernic. Both devices have: - 2 SDMMC slots. - A Realtek rtl8821cs WiFi/Bluetooth adapter. - A mini HDMI port. - A USB C host port and a USB C otg port (currently only working as device). - Multiple GPIO buttons and a single ADC button. - Dual analog joysticks controlled via a GPIO mux. - A headphone jack with amplified stereo speakers via a SGM4865 amp. - A PWM based vibrator for force feedback. The RG353P has: - 2GB LPDDR4 RAM. - A 32GB eMMC. - A 3.5 inch 640x480 4-lane DSI panel of unknown origin with an i2c controlled touchscreen (touchscreen is a Hynitron CST340). The RG503 has: - 1GB LPDDR4 RAM. - A 5 inch 960x544 AMOLED 2-lane DSI/DBI panel manufactured by Samsung with part number ams495qa04. Data for this panel is provided via the DSI interface, however commands are sent via a 9-bit 3-wire SPI interface. The MISO pin of SPI3 of the SOC is wired to the input of the panel, so it must be bitbanged. This devicetree enables the following hardware: - HDMI (plus audio). - Analog audio, including speakers. - All buttons. - All SDMMC/eMMC/SDIO controllers. - The ADC joysticks (note a pending patch is required to use them). - WiFi/Bluetooth (note out of tree drivers are required). - The PWM based vibrator motor. The following hardware is not enabled: - The display panels (drivers are being written and there are issues with the upstream DSI and VOP2 subsystems). - Battery (driver pending). - Touchscreen on the RG353P (note the i2c2 bus is enabled for it). Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20220906210324.28986-4-macroalpha82@gmail.comSigned-off-by:
-
Chris Morgan authored
Add entry for the Anbernic RG353P and RG503 handheld devices. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220906210324.28986-3-macroalpha82@gmail.comSigned-off-by:
-
Chris Morgan authored
Anbernic designs and manufactures portable gaming systems. https://anbernic.com/Signed-off-by:
-
Frank Wunderlich authored
Add -regulator suffix to regulator names on Banana Pi R2 Pro board as discussed on Mailinglist Signed-off-by:
Frank Wunderlich <frank-w@public-files.de> Reviewed-by:
-
FUKAUMI Naoki authored
add support for user LEDs on Radxa ROCK 4C+ board. Signed-off-by:
FUKAUMI Naoki <naoki@radxa.com> Link: https://lore.kernel.org/r/20220908031726.1307105-2-naoki@radxa.comSigned-off-by:
-
FUKAUMI Naoki authored
only user_led2 (blue) is supported. user_led1 (green) is not connected to any gpio so it cannot be controlled. Signed-off-by:
-
Chris Morgan authored
Add the new rk817 charger driver to the Odroid Go Advance. Create a monitored battery node as well for the charger to use. All values from monitored battery are gathered from the BSP kernel for the Odroid Go Advance provided by HardKernel. Signed-off-by:
Maya Matuszczyk <maccraft123mc@gmail.com> Link: https://lore.kernel.org/r/20220827021623.23829-5-macroalpha82@gmail.comSigned-off-by:
-
- 05 Sep, 2022 4 commits
-
-
Ondrej Jirman authored
Voltage constraints on vccio_sd are invalid. They don't match the voltages that LDO9 can generate, and this causes rk808-regulator driver to fail to probe with -EINVAL when it tries to apply the constraints during boot. Fix the constraints to something that LDO9 can be actually configured for. Fixes: 78a21c7d ("arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro") Signed-off-by:
Ondrej Jirman <megi@xff.cz> Reviewed-by:
Caleb Connolly <kc@postmarketos.org> Reviewed-by:
Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Tested-by:
-
Jagan Teki authored
Add support for Radxa ROCK 4C+ SBC. Key differences of 4C+ compared to previous ROCK Pi 4. - Rockchip RK3399-T SoC - DP from 4C replaced with micro HDMI 2K@60fps - 4-lane MIPI DSI with 1920*1080 - RK817 Audio codec Also, an official naming convention from Radxa mention to remove Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not Radxa ROCK Pi 4C+. Signed-off-by:
Stephen Chen <stephen@radxa.com> Signed-off-by:
Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20220902065057.97425-3-jagan@amarulasolutions.comSigned-off-by:
-
Jagan Teki authored
RK3399-T is down-clocked version of RK3399 SoC operated at 1.5GHz. Add CPU operating points table for it. Signed-off-by:
-
Jagan Teki authored
Document the dt-bindings for Radxa ROCK 4C+ SBC. Key differences of 4C+ compared to previous ROCK Pi 4. - Rockchip RK3399-T SoC - DP from 4C replaced with micro HDMI 2K@60fps - 4-lane MIPI DSI with 1920*1080 - RK817 Audio codec Also, an official naming convention from Radxa mention to remove Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not Radxa ROCK Pi 4C+. Acked-by:
-
- 04 Sep, 2022 8 commits
-
-
Martijn Braam authored
This is a basic DT containing regulators and UART, intended to be a base that myself and others can add additional nodes in future patches. Tested to work: booting from eMMC/SD, output over UART. https://wiki.pine64.org/wiki/PinePhone_Pro This is derived from the community pine64-org repo[0] with fixes from https://megous.com/git/linux. 0. https://gitlab.com/pine64-org/linux/-/commit/261d3b5f8ac503f97da810986d1d6422430c8531Signed-off-by:
Martijn Braam <martijn@brixit.nl> Co-developed-by:
Kamil Trzciński <ayufan@ayufan.eu> [no SoB, but Kamil is happy for this patch to be submitted] Co-developed-by:
Nícolas F. R. A. Prado <n@nfraprado.net> Tested-by:
-
Tom Fitzhenry authored
Document board compatible names for Pine64 PinePhonePro. https://wiki.pine64.org/wiki/PinePhone_ProSigned-off-by:
-
Andy Yan authored
EAIDK-610 is from OPEN AI LAB and popularly used by university students. Specification: - Rockchip RK3399 - LPDDR3 4GB - TF sd scard slot - eMMC - AP6255 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 - 12V DC Power supply This patch is test on Armbain and Glodroid with HDMI/GPU/USB HOST/Type-C ADB/WIFI/BT. Signed-off-by:
Andy Yan <andyshrk@163.com> Link: https://lore.kernel.org/r/20220709103016.2754044-1-andyshrk@163.comSigned-off-by:
-
Andy Yan authored
EAIDK-610 is a rk3399 based board from OPEN AI LAB and popularly used by university students. Specification: - Rockchip RK3399 - LPDDR3 4GB - TF sd scard slot - eMMC - AP6255 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 - 12V DC Power supply Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220709103001.2753992-1-andyshrk@163.comSigned-off-by:
-
Andy Yan authored
Add vendor prefixes for OPEN AI LAB. Signed-off-by:
-
Michael Riesch authored
Add the MIPI CSI DPHY node to the RK356x device tree. Signed-off-by:
Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220720091527.1270365-4-michael.riesch@wolfvision.netSigned-off-by:
-
Frank Wunderlich authored
Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and set PCIe related regulators to always on. Suggested-by:
Peter Geis <pgwipeout@gmail.com> Signed-off-by:
-
Frank Wunderlich authored
Add nodes to rk356x devicetree to support PCIe v3. Signed-off-by:
-
- 29 Aug, 2022 3 commits
-
-
Michael Riesch authored
On the Radxa ROCK3 Model A the I2C adapters related to the MIPI DSI connector and the M.2/NGFF connector use the non-default pins. Specify the correct pinctrl but leave the adapters disabled (as they are supposed to be activated by overlays that describe the external hardware). Signed-off-by:
-
Michael Riesch authored
The Radxa ROCK3 Model A features a voltage regulator that provides a 3V3 supply to the MIPI DSI connector. Add this regulator to the device tree of the board. Signed-off-by:
-
Michael Riesch authored
The Radxa ROCK3 Model A features a voltage regulator that provides a 3V3 supply to the MIPI CSI connector. Add this regulator to the device tree of the board. Signed-off-by:
-
- 23 Aug, 2022 1 commit
-
-
Nicolas Frattaroli authored
This adds the necessary device tree changes to enable analog audio output on the PINE64 Quartz64 Model B with its RK809 codec. The headphone detection pin is left out for now because I couldn't get it to work and am not sure if it even matters, but for future reference: It's pin GPIO4 RK_PC4, named HP_DET_L_GPIO4_C4 in the schematic. Signed-off-by:
-
- 22 Aug, 2022 1 commit
-
-
Linus Torvalds authored
-
- 21 Aug, 2022 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Ingo Molnar: "Misc irqchip fixes: LoongArch driver fixes and a Hyper-V IOMMU fix" * tag 'irq-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/loongson-liointc: Fix an error handling path in liointc_init() irqchip/loongarch: Fix irq_domain_alloc_fwnode() abuse irqchip/loongson-pch-pic: Move find_pch_pic() into CONFIG_ACPI irqchip/loongson-eiointc: Fix a build warning irqchip/loongson-eiointc: Fix irq affinity setting iommu/hyper-v: Use helper instead of directly accessing affinity
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 kprobes fix from Ingo Molnar: "Fix a kprobes bug in JNG/JNLE emulation when a kprobe is installed at such instructions, possibly resulting in incorrect execution (the wrong branch taken)" * tag 'perf-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Fix JNG/JNLE emulation
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Various fixes for tracing: - Fix a return value of traceprobe_parse_event_name() - Fix NULL pointer dereference from failed ftrace enabling - Fix NULL pointer dereference when asking for registers from eprobes - Make eprobes consistent with kprobes/uprobes, filters and histograms" * tag 'trace-v6.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Have filter accept "common_cpu" to be consistent tracing/probes: Have kprobes and uprobes use $COMM too tracing/eprobes: Have event probes be consistent with kprobes and uprobes tracing/eprobes: Fix reading of string fields tracing/eprobes: Do not hardcode $comm as a string tracing/eprobes: Do not allow eprobes to use $stack, or % for regs ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead tracing/perf: Fix double put of trace event when init fails tracing: React to error return from traceprobe_parse_event_name() -
Steven Rostedt (Google) authored
Make filtering consistent with histograms. As "cpu" can be a field of an event, allow for "common_cpu" to keep it from being confused with the "cpu" field of the event. Link: https://lkml.kernel.org/r/20220820134401.513062765@goodmis.org Link: https://lore.kernel.org/all/20220820220920.e42fa32b70505b1904f0a0ad@kernel.org/ Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Cc: Tom Zanussi <zanussi@kernel.org> Fixes: 1e3bac71 ("tracing/histogram: Rename "cpu" to "common_cpu"") Suggested-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Steven Rostedt (Google) authored
Both $comm and $COMM can be used to get current->comm in eprobes and the filtering and histogram logic. Make kprobes and uprobes consistent in this regard and allow both $comm and $COMM as well. Currently kprobes and uprobes only handle $comm, which is inconsistent with the other utilities, and can be confusing to users. Link: https://lkml.kernel.org/r/20220820134401.317014913@goodmis.org Link: https://lore.kernel.org/all/20220820220442.776e1ddaf8836e82edb34d01@kernel.org/ Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Cc: Tom Zanussi <zanussi@kernel.org> Fixes: 53305928 ("tracing: probeevent: Introduce new argument fetching code") Suggested-by:
-
