- 31 Mar, 2021 40 commits
-
-
Eric Dumazet authored
struct inet_timewait_death_row uses two cache lines, because we want tw_count to use a full cache line to avoid false sharing. Rework its definition and placement in netns_ipv4 so that: 1) We add 60 bytes of padding after tw_count to avoid false sharing, knowing that tcp_death_row will have ____cacheline_aligned_in_smp attribute. 2) We do not risk padding before tcp_death_row, because we move it at the beginning of netns_ipv4, even if new fields are added later. 3) We do not waste 48 bytes of padding after it. Note that I have not changed dccp. pahole result for struct netns_ipv4 before/after the patch : /* size: 832, cachelines: 13, members: 139 */ /* sum members: 721, holes: 12, sum holes: 95 */ /* padding: 16 */ /* paddings: 2, sum paddings: 55 */ -> /* size: 768, cachelines: 12, members: 139 */ /* sum members: 673, holes: 11, sum holes: 39 */ /* padding: 56 */ /* paddings: 2, sum paddings: 7 */ /* forced alignments: 1 */ Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Weihang Li says: ==================== net: fix some coding style issues Do some cleanups according to the coding style of kernel, including wrong print type, redundant and missing spaces and so on. ==================== Signed-off-by: -
Yangyang Li authored
Fix the following format warning: 1. Block comments use * on subsequent lines 2. Block comments use a trailing */ on a separate line Signed-off-by:
Yangyang Li <liyangyang20@huawei.com> Signed-off-by:
Weihang Li <liweihang@huawei.com> Signed-off-by:
-
Yixing Liu authored
Use a trailling */ on a separate line for block comments. Signed-off-by:
Yixing Liu <liuyixing1@huawei.com> Signed-off-by:
-
Yixing Liu authored
Use a tralling */ on a separate line for block comments. Signed-off-by:
-
Yixing Liu authored
There should be a blank line after declarations. Signed-off-by:
-
Yixing Liu authored
Delete unncecessary spaces and add some reasonable spaces according to the coding-style of kernel. Signed-off-by:
-
Yixing Liu authored
Remove the redundant "for" from the commment. Signed-off-by:
-
Yixing Liu authored
Use "%u" to replace "hu%". Signed-off-by:
-
Matthew Wilcox (Oracle) authored
The XArray interface is easier for this driver to use. Also fixes a bug reported by the improper use of GFP_ATOMIC. Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
-
Wan Jiabing authored
struct stmmac_safety_stats is declared twice. One has been declared at 29th line. Remove the duplicate. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
-
Eric Dumazet authored
Same reasons than for the previous commits : 6289a98f ("sit: proper dev_{hold|put} in ndo_[un]init methods") 40cb881b ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods") 7f700334 ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods") After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger a warning [1] Issue here is that: - all dev_put() should be paired with a corresponding prior dev_hold(). - A driver doing a dev_put() in its ndo_uninit() MUST also do a dev_hold() in its ndo_init(), only when ndo_init() is returning 0. Otherwise, register_netdevice() would call ndo_uninit() in its error path and release a refcount too soon. [1] WARNING: CPU: 1 PID: 21059 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31 Modules linked in: CPU: 1 PID: 21059 Comm: syz-executor.4 Not tainted 5.12.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31 Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58 RSP: 0018:ffffc900025aefe8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff815c51f5 RDI: fffff520004b5def RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff888023488568 R13: ffff8880254e9000 R14: 00000000dfd82cfd R15: ffff88802ee2d7c0 FS: 00007f13bc590700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0943e74000 CR3: 0000000025273000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __refcount_dec include/linux/refcount.h:344 [inline] refcount_dec include/linux/refcount.h:359 [inline] dev_put include/linux/netdevice.h:4135 [inline] ip6_tnl_dev_uninit+0x370/0x3d0 net/ipv6/ip6_tunnel.c:387 register_netdevice+0xadf/0x1500 net/core/dev.c:10308 ip6_tnl_create2+0x1b5/0x400 net/ipv6/ip6_tunnel.c:263 ip6_tnl_newlink+0x312/0x580 net/ipv6/ip6_tunnel.c:2052 __rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 919067cc ("net: add CONFIG_PCPU_DEV_REFCNT") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== ethtool: support FEC configuration over netlink This series adds support for the equivalents of ETHTOOL_GFECPARAM and ETHTOOL_SFECPARAM over netlink. As a reminder - this is an API which allows user to query current FEC mode, as well as set FEC manually if autoneg is disabled. It does not configure anything if autoneg is enabled (that said few/no drivers currently reject .set_fecparam calls while autoneg is disabled, hopefully FW will just ignore the settings). The existing functionality is mostly preserved in the new API. The ioctl interface uses a set of flags, and link modes to tell user which modes are supported. Here is how the flags translate to the new interface (skipping descriptions for actual FEC modes): ioctl flag | description | new API ================================================================ ETHTOOL_FEC_OFF | disabled (supported) | \ ETHTOOL_FEC_RS | | ` link mode bitset ETHTOOL_FEC_BASER | | / .._A_FEC_MODES ETHTOOL_FEC_LLRS | | / ETHTOOL_FEC_AUTO | pick based on cable | bool .._A_FEC_AUTO ETHTOOL_FEC_NONE | not supported | no bit, no AUTO reported Since link modes are already depended on (although somewhat implicitly) for expressing supported modes - the new interface uses them for the manual configuration, as well as uses link mode bit number to communicate the active mode. Use of link modes allows us to define any number of FEC modes we want, and reuse the strset we already have defined. Separating AUTO as its own attribute is the biggest changed compared to the ioctl. It means drivers can no longer report AUTO as the active FEC mode because there is no link mode for AUTO. active_fec == AUTO makes little sense in the first place IMHO, active_fec should be the actual mode, so hopefully this is fine. The other minor departure is that None is no longer explicitly expressed in the API. But drivers are reasonable in handling of this somewhat pointless bit, so I'm not expecting any issues there. One extension which could be considered would be moving active FEC to ETHTOOL_MSG_LINKMODE_*, but then why not move all of FEC into link modes? I don't know where to draw the line. netdevsim support and a simple self test are included. Next step is adding stats similar to the ones added for pause. ==================== Signed-off-by: -
Jakub Kicinski authored
Test FEC settings, iterate over configs. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Add support for ethtool FEC and some ethtool error injection. Signed-off-by:
-
Jakub Kicinski authored
Add FEC API to netlink. This is not a 1-to-1 conversion. FEC settings already depend on link modes to tell user which modes are supported. Take this further an use link modes for manual configuration. Old struct ethtool_fecparam is still used to talk to the drivers, so we need to translate back and forth. We can revisit the internal API if number of FEC encodings starts to grow. Enforce only one active FEC bit (by using a bit position rather than another mask). Signed-off-by:
-
Eric Lin authored
Signed-off-by:
Eric Lin <dslin1010@gmail.com> Reported-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Ido Schimmel authored
When cleared, the 'force' parameter in nexthop bucket replacement notifications indicates that a driver should try to perform an atomic replacement. Meaning, only update the contents of the bucket if it is inactive. Since mlxsw only queries buckets' activity once every second, there is no point in trying an atomic replacement if the idle timer interval is smaller than 1 second. Currently, mlxsw ignores the original value of 'force' and will always try an atomic replacement if the idle timer is not smaller than 1 second. Fix this by taking the original value of 'force' into account and never promoting a non-atomic replacement to an atomic one. Fixes: 617a77f0 ("mlxsw: spectrum_router: Add nexthop bucket replacement support") Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== MPTCP: Allow initial subflow to be disconnected An MPTCP connection is aggregated from multiple TCP subflows, and can involve multiple IP addresses on either peer. The addresses used in the initial subflow connection are assigned address id 0 on each side of the link. More addresses can be added and shared with the peer using address IDs of 1 or larger. MPTCP in Linux shares non-zero address IDs across all MPTCP connections in a net namespace, which allows userspace to manage subflow connections across a number of sockets. However, this makes the address with id 0 a special case, since the IP address associated with id 0 is potentially different for each socket. This patch set allows the initial subflow to be disconnected when userspace specifies an address to remove using both id 0 and an IP address, or when the peer sends an RM_ADDR for id 0. Patches 1 and 3 implement the change for requests from the peer and userspace, respectively. Patch 2 consolidates some code for disconnecting subflows. Patches 4-6 update the self tests to cover removal of subflows using address id 0. ==================== Signed-off-by: -
Geliang Tang authored
This patch added the testcases for removing the id 0 subflow and the id 0 address. In do_transfer, use the removing addresses number '9' for deleting the id 0 address. Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
-
Geliang Tang authored
For the id 0 address, different MPTCP connections could be using different IP addresses for id 0. This patch added an extra argument IP address for del_addr when using id 0. Reviewed-by:
-
Matthieu Baerts authored
IDs are supposed to be between 0 and 255. In pm_nl_ctl, for both the 'add' and 'get' instruction, the ID is casted in a u_int8_t. So if we give 256, we will delete ID 0. Obviously, the goal is not to delete this ID by giving 256. We could modify pm_nl_ctl and stop if the ID is negative or higher than 255 but probably better not to increase the number of lines for such things in this tool which is only used in selftests. Instead, we use it within the limits. This modification also means that we will no longer add a new ID for the 2nd entry. That's why we removed an expected entry from the dump and introduced with commit dc8eb10e ("selftests: mptcp: add testcases for setting the address ID"). So now we delete ID 9 like before and we add entries for IDs 10 to 255 that are deleted just after. Note that this could be seen as a fix but it was not really an issue so far: we were simply playing with ID 0/1 once again. With the following commit ("selftests: mptcp: add addr argument for del_addr"), it will be different because ID 0 is going to required an address. We don't want errors when trying to delete ID 0 without the address argument. Acked-and-tested-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Geliang Tang authored
This patch added a new function mptcp_nl_remove_id_zero_address to remove the id 0 address. In this function, traverse all the existing msk sockets to find the msk matched the input IP address. Then fill the removing list with id 0, and pass it to mptcp_pm_remove_addr and mptcp_pm_remove_subflow. Suggested-by:
Paolo Abeni <pabeni@redhat.com> Suggested-by:
-
Geliang Tang authored
There are some duplicate code in mptcp_pm_nl_rm_addr_received and mptcp_pm_nl_rm_subflow_received. This patch unifies them into a new function named mptcp_pm_nl_rm_addr_or_subflow. In it, use the input parameter rm_type to identify it's now removing an address or a subflow. Suggested-by:
-
Geliang Tang authored
There's only one subflow involving the non-zero id address, but there may be multi subflows involving the id 0 address. Here's an example: local_id=0, remote_id=0 local_id=1, remote_id=0 local_id=0, remote_id=1 If the removing address id is 0, all the subflows involving the id 0 address need to be removed. In mptcp_pm_nl_rm_addr_received/mptcp_pm_nl_rm_subflow_received, the "break" prevents the iteration to the next subflow, so this patch dropped them. Reviewed-by:
-
Eric Dumazet authored
sysctl_icmp_echo_enable_probe is an u8. ipv4_net_table entry should use .maxlen = sizeof(u8). .proc_handler = proc_dou8vec_minmax, Fixes: f1b8fa9f ("net: add sysctl for enabling RFC 8335 PROBE messages") Signed-off-by:
-
David S. Miller authored
Shannon Nelson says: ==================== ionic: code cleanup for heartbeat, dma error counts, sizeof, stats These patches are a few more bits of code cleanup found in testing and review: count all our dma error instances, make better use of sizeof, fix a race in our device heartbeat check, and clean up code formatting in the ethtool stats collection. ==================== Signed-off-by: -
Shannon Nelson authored
Abstract out the per-queue data collection work into separate functions from the per-queue loops in the stats reporting, similar to what Alex did for the data label strings in commit acebe5b6 ("ionic: Update driver to use ethtool_sprintf") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Rework the heartbeat checks to be sure that we're getting an atomic operation. Through testing we found occasions where a separate thread could clash with this check and cause erroneous heartbeat check results. Signed-off-by:
Allen Hubbe <allenbh@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Use the actual pointer that we care about as the subject of the sizeof, rather than a struct name. Signed-off-by:
-
Shannon Nelson authored
Increment our dma-error counter in a couple of spots that were missed before. Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-switch: add STP support This patch set adds support for STP to the dpaa2-switch. First of all, it fixes a bug which was determined by the improper usage of bridge BR_STATE_* values directly in the MC ABI. The next patches deal with creating an ACL table per port and trapping the STP frames to the control interface by adding an entry into each table. The last patch configures proper learning state depending on the STP state. ==================== Signed-off-by: -
Ioana Ciornei authored
Depending on what STP state a port is in, the learning on that port should be enabled or disabled. When the STP state is DISABLED, BLOCKING or LISTENING no learning should be happening irrespective of what the bridge previously requested. The learning state is changed to be the one setup by the bridge when the STP state is LEARNING or FORWARDING. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Ioana Ciornei authored
Add an ACL entry in each port's ACL table to redirect any frame that has the destination MAC address equal to the STP dmac to the control interface. Signed-off-by:
-
Ioana Ciornei authored
Keep track of the current learning state per port so that we can reference it in the next patches when setting up a STP state. Signed-off-by:
-
Ioana Ciornei authored
In order to trap frames to the CPU, the DPAA2 switch uses the ACL table. At probe time, create an ACL table for each switch port so that in the next patches we can use this to trap STP frames and redirect them to the control interface. Signed-off-by:
-
Ioana Ciornei authored
The numerical values used for STP states are different between the bridge and the MC ABI therefore, the direct usage of the BR_STATE_* macros directly in the structures passed to the firmware is incorrect. Create a separate function that translates between the bridge STP states and the enum that holds the STP state as seen by the Management Complex. Signed-off-by:
-
Vlad Buslov authored
Use act_simple to verify that action created with 'tc actions change' command exists after command returns. The goal is to verify internal action API reference counting to ensure that the case when netlink message has NLM_F_REPLACE flag set but action with specified index doesn't exist is handled correctly. Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Signed-off-by:
-
David S. Miller authored
Paolo Abeni says: ==================== udp: GRO L4 improvements This series improves the UDP L4 - either 'forward' or 'frag_list' - co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic. The first for patches are mostly bugfixes, addressing some GRO edge-cases when both tunnels and L4 are present, enabled and in use. The next 3 patches avoid unneeded segmentation when UDP GRO traffic traverses in the receive path UDP tunnels. Finally, some self-tests are included, covering the relevant GRO scenarios. Even if most patches are actually bugfixes, this series is targeting net-next, as overall it makes available a new feature. v2 -> v3: - no code changes, more verbose commit messages and comment in patch 1/8 v1 -> v2: - restrict post segmentation csum fixup to the only the relevant pkts - use individual 'accept_gso_type' fields instead of whole gso bitmask (Willem) - use only ipv6 addesses from test range in self-tests (Willem) - hopefully clarified most individual patches commit messages ==================== Signed-off-by: -
Paolo Abeni authored
Create a bunch of virtual topologies and verify that NETIF_F_GRO_FRAGLIST or NETIF_F_GRO_UDP_FWD-enabled devices aggregate the ingress packets as expected. Additionally check that the aggregate packets are segmented correctly when landing on a socket Also test SKB_GSO_FRAGLIST and SKB_GSO_UDP_L4 aggregation on top of UDP tunnel (vxlan) v1 -> v2: - hopefully clarify the commit message - moved the overlay network ipv6 range into the 'documentation' reserved range (Willem) Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
