- 17 Mar, 2018 8 commits
-
-
Davide Caratti authored
when the following command # tc action add action sample rate 100 group 100 index 100 is run for the first time, and psample_group_get(100) fails to create a new group, tcf_sample_cleanup() calls psample_group_put(NULL), thus causing the following error: BUG: unable to handle kernel NULL pointer dereference at 000000000000001c IP: psample_group_put+0x15/0x71 [psample] PGD 8000000075775067 P4D 8000000075775067 PUD 7453c067 PMD 0 Oops: 0002 [#1] SMP PTI Modules linked in: act_sample(E) psample ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core mbcache jbd2 crct10dif_pclmul snd_hwdep crc32_pclmul snd_seq ghash_clmulni_intel pcbc snd_seq_device snd_pcm aesni_intel crypto_simd snd_timer glue_helper snd cryptd joydev pcspkr i2c_piix4 soundcore virtio_balloon nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_net ata_piix virtio_console virtio_blk libata serio_raw crc32c_intel virtio_pci i2c_core virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_tunnel_key] CPU: 2 PID: 5740 Comm: tc Tainted: G E 4.16.0-rc4.act_vlan.orig+ #403 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:psample_group_put+0x15/0x71 [psample] RSP: 0018:ffffb8a80032f7d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000024 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffffc06d93c0 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 R10: 00000000bd003000 R11: ffff979fba04aa59 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff979fbba3f22c FS: 00007f7638112740(0000) GS:ffff979fbfd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 00000000734ea001 CR4: 00000000001606e0 Call Trace: __tcf_idr_release+0x79/0xf0 tcf_sample_init+0x125/0x1d0 [act_sample] tcf_action_init_1+0x2cc/0x430 tcf_action_init+0xd3/0x1b0 tc_ctl_action+0x18b/0x240 rtnetlink_rcv_msg+0x29c/0x310 ? _cond_resched+0x15/0x30 ? __kmalloc_node_track_caller+0x1b9/0x270 ? rtnl_calcit.isra.28+0x100/0x100 netlink_rcv_skb+0xd2/0x110 netlink_unicast+0x17c/0x230 netlink_sendmsg+0x2cd/0x3c0 sock_sendmsg+0x30/0x40 ___sys_sendmsg+0x27a/0x290 ? filemap_map_pages+0x34a/0x3a0 ? __handle_mm_fault+0xbfd/0xe20 __sys_sendmsg+0x51/0x90 do_syscall_64+0x6e/0x1a0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7f7637523ba0 RSP: 002b:00007fff0473ef58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fff0473f080 RCX: 00007f7637523ba0 RDX: 0000000000000000 RSI: 00007fff0473efd0 RDI: 0000000000000003 RBP: 000000005aaaac80 R08: 0000000000000002 R09: 0000000000000000 R10: 00007fff0473e9e0 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff0473f094 R14: 0000000000000001 R15: 0000000000669f60 Code: be 02 00 00 00 48 89 df e8 a9 fe ff ff e9 7c ff ff ff 0f 1f 40 00 0f 1f 44 00 00 53 48 89 fb 48 c7 c7 c0 93 6d c0 e8 db 20 8c ef <83> 6b 1c 01 74 10 48 c7 c7 c0 93 6d c0 ff 14 25 e8 83 83 b0 5b RIP: psample_group_put+0x15/0x71 [psample] RSP: ffffb8a80032f7d0 CR2: 000000000000001c Fix it in tcf_sample_cleanup(), ensuring that calls to psample_group_put(p) are done only when p is not NULL. Fixes: cadb9c9f ("net/sched: act_sample: Fix error path in init") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
when the following command # tc action add action tunnel_key unset index 100 is run for the first time, and tunnel_key_init() fails to allocate struct tcf_tunnel_key_params, tunnel_key_release() dereferences NULL pointers. This causes the following error: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: tunnel_key_release+0xd/0x40 [act_tunnel_key] PGD 8000000033787067 P4D 8000000033787067 PUD 74646067 PMD 0 Oops: 0000 [#1] SMP PTI Modules linked in: act_tunnel_key(E) act_csum ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel pcbc snd_hda_codec snd_hda_core snd_hwdep snd_seq aesni_intel snd_seq_device crypto_simd glue_helper snd_pcm cryptd joydev snd_timer pcspkr virtio_balloon snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net virtio_blk drm virtio_console crc32c_intel ata_piix serio_raw i2c_core virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod CPU: 2 PID: 3101 Comm: tc Tainted: G E 4.16.0-rc4.act_vlan.orig+ #403 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:tunnel_key_release+0xd/0x40 [act_tunnel_key] RSP: 0018:ffffba46803b7768 EFLAGS: 00010286 RAX: ffffffffc09010a0 RBX: 0000000000000000 RCX: 0000000000000024 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff99ee336d7480 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 R10: 0000000000000220 R11: ffff99ee79d73131 R12: 0000000000000000 R13: ffff99ee32d67610 R14: ffff99ee7671dc38 R15: 00000000fffffff4 FS: 00007febcb2cd740(0000) GS:ffff99ee7fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000007c8e4005 CR4: 00000000001606e0 Call Trace: __tcf_idr_release+0x79/0xf0 tunnel_key_init+0xd9/0x460 [act_tunnel_key] tcf_action_init_1+0x2cc/0x430 tcf_action_init+0xd3/0x1b0 tc_ctl_action+0x18b/0x240 rtnetlink_rcv_msg+0x29c/0x310 ? _cond_resched+0x15/0x30 ? __kmalloc_node_track_caller+0x1b9/0x270 ? rtnl_calcit.isra.28+0x100/0x100 netlink_rcv_skb+0xd2/0x110 netlink_unicast+0x17c/0x230 netlink_sendmsg+0x2cd/0x3c0 sock_sendmsg+0x30/0x40 ___sys_sendmsg+0x27a/0x290 __sys_sendmsg+0x51/0x90 do_syscall_64+0x6e/0x1a0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7febca6deba0 RSP: 002b:00007ffe7b0dd128 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffe7b0dd250 RCX: 00007febca6deba0 RDX: 0000000000000000 RSI: 00007ffe7b0dd1a0 RDI: 0000000000000003 RBP: 000000005aaa90cb R08: 0000000000000002 R09: 0000000000000000 R10: 00007ffe7b0dcba0 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe7b0dd264 R14: 0000000000000001 R15: 0000000000669f60 Code: 44 00 00 8b 0d b5 23 00 00 48 8b 87 48 10 00 00 48 8b 3c c8 e9 a5 e5 d8 c3 0f 1f 44 00 00 0f 1f 44 00 00 53 48 8b 9f b0 00 00 00 <83> 7b 10 01 74 0b 48 89 df 31 f6 5b e9 f2 fa 7f c3 48 8b 7b 18 RIP: tunnel_key_release+0xd/0x40 [act_tunnel_key] RSP: ffffba46803b7768 CR2: 0000000000000010 Fix this in tunnel_key_release(), ensuring 'param' is not NULL before dereferencing it. Fixes: d0f6dd8a ("net/sched: Introduce act_tunnel_key") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
when the following command # tc action add action csum udp continue index 100 is run for the first time, and tcf_csum_init() fails allocating struct tcf_csum, tcf_csum_cleanup() calls kfree_rcu(NULL,...). This causes the following error: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: __call_rcu+0x23/0x2b0 PGD 80000000740b4067 P4D 80000000740b4067 PUD 32e7f067 PMD 0 Oops: 0002 [#1] SMP PTI Modules linked in: act_csum(E) act_vlan ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic pcbc snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer aesni_intel crypto_simd glue_helper cryptd snd joydev pcspkr virtio_balloon i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_blk drm virtio_net virtio_console ata_piix crc32c_intel libata virtio_pci serio_raw i2c_core virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_vlan] CPU: 2 PID: 5763 Comm: tc Tainted: G E 4.16.0-rc4.act_vlan.orig+ #403 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__call_rcu+0x23/0x2b0 RSP: 0018:ffffb275803e77c0 EFLAGS: 00010246 RAX: ffffffffc057b080 RBX: ffff9674bc6f5240 RCX: 00000000ffffffff RDX: ffffffff928a5f00 RSI: 0000000000000008 RDI: 0000000000000008 RBP: 0000000000000008 R08: 0000000000000001 R09: 0000000000000044 R10: 0000000000000220 R11: ffff9674b9ab4821 R12: 0000000000000000 R13: ffffffff928a5f00 R14: 0000000000000000 R15: 0000000000000001 FS: 00007fa6368d8740(0000) GS:ffff9674bfd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000000073dec001 CR4: 00000000001606e0 Call Trace: __tcf_idr_release+0x79/0xf0 tcf_csum_init+0xfb/0x180 [act_csum] tcf_action_init_1+0x2cc/0x430 tcf_action_init+0xd3/0x1b0 tc_ctl_action+0x18b/0x240 rtnetlink_rcv_msg+0x29c/0x310 ? _cond_resched+0x15/0x30 ? __kmalloc_node_track_caller+0x1b9/0x270 ? rtnl_calcit.isra.28+0x100/0x100 netlink_rcv_skb+0xd2/0x110 netlink_unicast+0x17c/0x230 netlink_sendmsg+0x2cd/0x3c0 sock_sendmsg+0x30/0x40 ___sys_sendmsg+0x27a/0x290 ? filemap_map_pages+0x34a/0x3a0 ? __handle_mm_fault+0xbfd/0xe20 __sys_sendmsg+0x51/0x90 do_syscall_64+0x6e/0x1a0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fa635ce9ba0 RSP: 002b:00007ffc185b0fc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffc185b10f0 RCX: 00007fa635ce9ba0 RDX: 0000000000000000 RSI: 00007ffc185b1040 RDI: 0000000000000003 RBP: 000000005aaa85e0 R08: 0000000000000002 R09: 0000000000000000 R10: 00007ffc185b0a20 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc185b1104 R14: 0000000000000001 R15: 0000000000669f60 Code: 5d e9 42 da ff ff 66 90 0f 1f 44 00 00 41 57 41 56 41 55 49 89 d5 41 54 55 48 89 fd 53 48 83 ec 08 40 f6 c7 07 0f 85 19 02 00 00 <48> 89 75 08 48 c7 45 00 00 00 00 00 9c 58 0f 1f 44 00 00 49 89 RIP: __call_rcu+0x23/0x2b0 RSP: ffffb275803e77c0 CR2: 0000000000000010 fix this in tcf_csum_cleanup(), ensuring that kfree_rcu(param, ...) is called only when param is not NULL. Fixes: 9c5f69bb ("net/sched: act_csum: don't use spinlock in the fast path") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
when the following command # tc actions replace action vlan pop index 100 is run for the first time, and tcf_vlan_init() fails allocating struct tcf_vlan_params, tcf_vlan_cleanup() calls kfree_rcu(NULL, ...). This causes the following error: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: __call_rcu+0x23/0x2b0 PGD 80000000760a2067 P4D 80000000760a2067 PUD 742c1067 PMD 0 Oops: 0002 [#1] SMP PTI Modules linked in: act_vlan(E) ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic snd_hda_intel mbcache snd_hda_codec jbd2 snd_hda_core crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd snd_timer glue_helper snd cryptd joydev soundcore virtio_balloon pcspkr i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_console virtio_blk virtio_net ata_piix crc32c_intel libata virtio_pci i2c_core virtio_ring serio_raw virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_vlan] CPU: 3 PID: 3119 Comm: tc Tainted: G E 4.16.0-rc4.act_vlan.orig+ #403 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__call_rcu+0x23/0x2b0 RSP: 0018:ffffaac3005fb798 EFLAGS: 00010246 RAX: ffffffffc0704080 RBX: ffff97f2b4bbe900 RCX: 00000000ffffffff RDX: ffffffffabca5f00 RSI: 0000000000000010 RDI: 0000000000000010 RBP: 0000000000000010 R08: 0000000000000001 R09: 0000000000000044 R10: 00000000fd003000 R11: ffff97f2faab5b91 R12: 0000000000000000 R13: ffffffffabca5f00 R14: ffff97f2fb80202c R15: 00000000fffffff4 FS: 00007f68f75b4740(0000) GS:ffff97f2ffd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 0000000072b52001 CR4: 00000000001606e0 Call Trace: __tcf_idr_release+0x79/0xf0 tcf_vlan_init+0x168/0x270 [act_vlan] tcf_action_init_1+0x2cc/0x430 tcf_action_init+0xd3/0x1b0 tc_ctl_action+0x18b/0x240 rtnetlink_rcv_msg+0x29c/0x310 ? _cond_resched+0x15/0x30 ? __kmalloc_node_track_caller+0x1b9/0x270 ? rtnl_calcit.isra.28+0x100/0x100 netlink_rcv_skb+0xd2/0x110 netlink_unicast+0x17c/0x230 netlink_sendmsg+0x2cd/0x3c0 sock_sendmsg+0x30/0x40 ___sys_sendmsg+0x27a/0x290 ? filemap_map_pages+0x34a/0x3a0 ? __handle_mm_fault+0xbfd/0xe20 __sys_sendmsg+0x51/0x90 do_syscall_64+0x6e/0x1a0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7f68f69c5ba0 RSP: 002b:00007fffd79c1118 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fffd79c1240 RCX: 00007f68f69c5ba0 RDX: 0000000000000000 RSI: 00007fffd79c1190 RDI: 0000000000000003 RBP: 000000005aaa708e R08: 0000000000000002 R09: 0000000000000000 R10: 00007fffd79c0ba0 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffd79c1254 R14: 0000000000000001 R15: 0000000000669f60 Code: 5d e9 42 da ff ff 66 90 0f 1f 44 00 00 41 57 41 56 41 55 49 89 d5 41 54 55 48 89 fd 53 48 83 ec 08 40 f6 c7 07 0f 85 19 02 00 00 <48> 89 75 08 48 c7 45 00 00 00 00 00 9c 58 0f 1f 44 00 00 49 89 RIP: __call_rcu+0x23/0x2b0 RSP: ffffaac3005fb798 CR2: 0000000000000018 fix this in tcf_vlan_cleanup(), ensuring that kfree_rcu(p, ...) is called only when p is not NULL. Fixes: 4c5b9d96 ("act_vlan: VLAN action rewrite to use RCU lock/unlock and update") Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Manish Kurup <manish.kurup@verizon.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
SZ Lin (林上智) authored
According to AM335x TRM[1] 14.3.6.2, AM437x TRM[2] 15.3.6.2 and DRA7 TRM[3] 24.11.4.8.7.3.3, in-band mode in EXT_EN(bit18) register is only available when PHY is configured in RGMII mode with 10Mbps speed. It will cause some networking issues without RGMII mode, such as carrier sense errors and low throughput. TI also mentioned this issue in their forum[4]. This patch adds the check mechanism for PHY interface with RGMII interface type, the in-band mode can only be set in RGMII mode with 10Mbps speed. References: [1]: https://www.ti.com/lit/ug/spruh73p/spruh73p.pdf [2]: http://www.ti.com/lit/ug/spruhl7h/spruhl7h.pdf [3]: http://www.ti.com/lit/ug/spruic2b/spruic2b.pdf [4]: https://e2e.ti.com/support/arm/sitara_arm/f/791/p/640765/2392155Suggested-by: Holsety Chen (陳憲輝) <Holsety.Chen@moxa.com> Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matthias Brugger authored
The driver implementation returns support for private flags, while no private flags are present. When asked for the number of private flags it returns the number of statistic flag names. Fix this by returning EOPNOTSUPP for not implemented ethtool flags. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
In commit 9ffcc372 ("mlxsw: spectrum: Allow packets to be trapped from any PG") I fixed a problem where packets could not be trapped to the CPU due to exceeded shared buffer quotas. The mentioned commit explains the problem in detail. The problem was fixed by assigning a minimum quota for the CPU port and the traffic class used for scheduling traffic to the CPU. However, commit 117b0dad ("mlxsw: Create a different trap group list for each device") assigned different traffic classes to different packet types and rendered the fix useless. Fix the problem by assigning a minimum quota for the CPU port and all the traffic classes that are currently in use. Fixes: 117b0dad ("mlxsw: Create a different trap group list for each device") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Eddie Shklaer <eddies@mellanox.com> Tested-by: Eddie Shklaer <eddies@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzbot reported one use-after-free in pfifo_fast_enqueue() [1] Issue here is that we can not reuse skb after a successful skb_array_produce() since another cpu might have consumed it already. I believe a similar problem exists in try_bulk_dequeue_skb_slow() in case we put an skb into qdisc_enqueue_skb_bad_txq() for lockless qdisc. [1] BUG: KASAN: use-after-free in qdisc_pkt_len include/net/sch_generic.h:610 [inline] BUG: KASAN: use-after-free in qdisc_qstats_cpu_backlog_inc include/net/sch_generic.h:712 [inline] BUG: KASAN: use-after-free in pfifo_fast_enqueue+0x4bc/0x5e0 net/sched/sch_generic.c:639 Read of size 4 at addr ffff8801cede37e8 by task syzkaller717588/5543 CPU: 1 PID: 5543 Comm: syzkaller717588 Not tainted 4.16.0-rc4+ #265 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23c/0x360 mm/kasan/report.c:412 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432 qdisc_pkt_len include/net/sch_generic.h:610 [inline] qdisc_qstats_cpu_backlog_inc include/net/sch_generic.h:712 [inline] pfifo_fast_enqueue+0x4bc/0x5e0 net/sched/sch_generic.c:639 __dev_xmit_skb net/core/dev.c:3216 [inline] Fixes: c5ad119f ("net: sched: pfifo_fast use skb_array") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+ed43b6903ab968b16f54@syzkaller.appspotmail.com Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Mar, 2018 13 commits
-
-
Andrew Lunn authored
The MDIO busses are switch properties and so should be inside the switch node. Fix the examples in the binding document. Reported-by: 尤晓杰 <yxj790222@163.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Fixes: a3c53be5 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vinicius Costa Gomes authored
When errors are enqueued to the error queue via sock_queue_err_skb() function, it is possible that the waiting application is not notified. Calling 'sk->sk_data_ready()' would not notify applications that selected only POLLERR events in poll() (for example). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: Randy E. Witt <randy.e.witt@intel.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
nlmsg_multicast() consumes always the skb, thus the original skb must be freed only when this function is called with a clone. Fixes: cb9f7a9a ("netlink: ensure to loop over all netns in genlmsg_multicast_allns()") Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Kalderon authored
Link updates were not reported to qedr correctly. Leading to cases where a link could be down, but qedr would see it as up. In addition, once qede was loaded, link state would be up, regardless of the actual link state. Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michal Kalderon says: ==================== qed: iWARP related fixes This series contains two fixes related to iWARP flow. ==================== Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
-
Michal Kalderon authored
FW workaround. The iWARP LL2 connection did not expect TCP packets to arrive on it's connection. The fix drops any non-tcp packets Fixes b5c29ca7 ("qed: iWARP CM - setup a ll2 connection for handling SYN packets") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Kalderon authored
There is a corner case in the MPA unalign flow where a FPDU header is split over two tcp segments. The length of the first fragment in this case was not initialized properly and should be '1' Fixes: c7d1d839 ("qed: Add support for MPA header being split over two tcp packets") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
Free memory by calling put_device(), if afiucv_iucv_init is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
There is no need for complex checking between the last consumed index and current consumed index, a simple subtraction will do. This also eliminates the possibility of a permanent transmit queue stall under the following conditions: - one CPU bursts ring->size worth of traffic (up to 256 buffers), to the point where we run out of free descriptors, so we stop the transmit queue at the end of bcm_sysport_xmit() - because of our locking, we have the transmit process disable interrupts which means we can be blocking the TX reclamation process - when TX reclamation finally runs, we will be computing the difference between ring->c_index (last consumed index by SW) and what the HW reports through its register - this register is masked with (ring->size - 1) = 0xff, which will lead to stripping the upper bits of the index (register is 16-bits wide) - we will be computing last_tx_cn as 0, which means there is no work to be done, and we never wake-up the transmit queue, leaving it permanently disabled A practical example is e.g: ring->c_index aka last_c_index = 12, we pushed 256 entries, HW consumer index = 268, we mask it with 0xff = 12, so last_tx_cn == 0, nothing happens. Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Need to lock lower socket in order to provide mutual exclusion with kcm_unattach. v2: Add Reported-by for syzbot Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot+ea75c0ffcd353d32515f064aaebefc5279e6161e@syzkaller.appspotmail.com Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Toshiaki Makita says: ==================== Fix vlan untag and insertion for bridge and vlan with reorder_hdr off As Brandon Carpenter reported[1], sending non-vlan-offloaded packets from bridge devices ends up with corrupted packets. He narrowed down this problem and found that the root cause is in skb_reorder_vlan_header(). While I was working on fixing this problem, I found that the function does not work properly for double tagged packets with reorder_hdr off as well. Patch 1 fixes these 2 problems in skb_reorder_vlan_header(). And it turned out that fixing skb_reorder_vlan_header() is not sufficient to receive double tagged packets with reorder_hdr off while I was testing the fix. Vlan tags got out of order when vlan devices with reorder_hdr disabled were stacked. Patch 2 fixes this problem. [1] https://www.spinics.net/lists/linux-ethernet-bridging/msg07039.html ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Toshiaki Makita authored
With reorder header off, received packets are untagged in skb_vlan_untag() called from within __netif_receive_skb_core(), and later the tag will be inserted back in vlan_do_receive(). This caused out of order vlan headers when we create a vlan device on top of another vlan device, because vlan_do_receive() inserts a tag as the outermost vlan tag. E.g. the outer tag is first removed in skb_vlan_untag() and inserted back in vlan_do_receive(), then the inner tag is next removed and inserted back as the outermost tag. This patch fixes the behaviour by inserting the inner tag at the right position. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Toshiaki Makita authored
When we have a bridge with vlan_filtering on and a vlan device on top of it, packets would be corrupted in skb_vlan_untag() called from br_dev_xmit(). The problem sits in skb_reorder_vlan_header() used in skb_vlan_untag(), which makes use of skb->mac_len. In this function mac_len is meant for handling rx path with vlan devices with reorder_header disabled, but in tx path mac_len is typically 0 and cannot be used, which is the problem in this case. The current code even does not properly handle rx path (skb_vlan_untag() called from __netif_receive_skb_core()) with reorder_header off actually. In rx path single tag case, it works as follows: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+------+---- | ETH | VLAN | ETH | | ADDRS | TPID | TCI | TYPE | +-------------------+-------------+------+---- <-------- mac_len ---------> <-------------> to be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <-------- mac_len ---------> This is ok, but in rx double tag case, it corrupts packets: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+-------------+------+---- | ETH | VLAN | VLAN | ETH | | ADDRS | TPID | TCI | TPID | TCI | TYPE | +-------------------+-------------+-------------+------+---- <--------------- mac_len ----------------> <-------------> should be removed <---------------------------> actually will be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <--------------- mac_len ----------------> So, two of vlan tags are both removed while only inner one should be removed and mac_header (and mac_len) is broken. skb_vlan_untag() is meant for removing the vlan header at (skb->data - 2), so use skb->data and skb->mac_header to calculate the right offset. Reported-by: Brandon Carpenter <brandon.carpenter@cypherpath.com> Fixes: a6e18ff1 ("vlan: Fix untag operations of stacked vlans with REORDER_HEADER off") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 15 Mar, 2018 2 commits
-
-
Roman Mashak authored
If set/unset mode of the tunnel_key action is not provided, ->init() still returns 0, and the caller proceeds with bogus 'struct tc_action *' object, this results in crash: % tc actions add action tunnel_key src_ip 1.1.1.1 dst_ip 2.2.2.1 id 7 index 1 [ 35.805515] general protection fault: 0000 [#1] SMP PTI [ 35.806161] Modules linked in: act_tunnel_key kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd serio_raw [ 35.808233] CPU: 1 PID: 428 Comm: tc Not tainted 4.16.0-rc4+ #286 [ 35.808929] RIP: 0010:tcf_action_init+0x90/0x190 [ 35.809457] RSP: 0018:ffffb8edc068b9a0 EFLAGS: 00010206 [ 35.810053] RAX: 1320c000000a0003 RBX: 0000000000000001 RCX: 0000000000000000 [ 35.810866] RDX: 0000000000000070 RSI: 0000000000007965 RDI: ffffb8edc068b910 [ 35.811660] RBP: ffffb8edc068b9d0 R08: 0000000000000000 R09: ffffb8edc068b808 [ 35.812463] R10: ffffffffc02bf040 R11: 0000000000000040 R12: ffffb8edc068bb38 [ 35.813235] R13: 0000000000000000 R14: 0000000000000000 R15: ffffb8edc068b910 [ 35.814006] FS: 00007f3d0d8556c0(0000) GS:ffff91d1dbc40000(0000) knlGS:0000000000000000 [ 35.814881] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.815540] CR2: 000000000043f720 CR3: 0000000019248001 CR4: 00000000001606a0 [ 35.816457] Call Trace: [ 35.817158] tc_ctl_action+0x11a/0x220 [ 35.817795] rtnetlink_rcv_msg+0x23d/0x2e0 [ 35.818457] ? __slab_alloc+0x1c/0x30 [ 35.819079] ? __kmalloc_node_track_caller+0xb1/0x2b0 [ 35.819544] ? rtnl_calcit.isra.30+0xe0/0xe0 [ 35.820231] netlink_rcv_skb+0xce/0x100 [ 35.820744] netlink_unicast+0x164/0x220 [ 35.821500] netlink_sendmsg+0x293/0x370 [ 35.822040] sock_sendmsg+0x30/0x40 [ 35.822508] ___sys_sendmsg+0x2c5/0x2e0 [ 35.823149] ? pagecache_get_page+0x27/0x220 [ 35.823714] ? filemap_fault+0xa2/0x640 [ 35.824423] ? page_add_file_rmap+0x108/0x200 [ 35.825065] ? alloc_set_pte+0x2aa/0x530 [ 35.825585] ? finish_fault+0x4e/0x70 [ 35.826140] ? __handle_mm_fault+0xbc1/0x10d0 [ 35.826723] ? __sys_sendmsg+0x41/0x70 [ 35.827230] __sys_sendmsg+0x41/0x70 [ 35.827710] do_syscall_64+0x68/0x120 [ 35.828195] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 35.828859] RIP: 0033:0x7f3d0ca4da67 [ 35.829331] RSP: 002b:00007ffc9f284338 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 35.830304] RAX: ffffffffffffffda RBX: 00007ffc9f284460 RCX: 00007f3d0ca4da67 [ 35.831247] RDX: 0000000000000000 RSI: 00007ffc9f2843b0 RDI: 0000000000000003 [ 35.832167] RBP: 000000005aa6a7a9 R08: 0000000000000001 R09: 0000000000000000 [ 35.833075] R10: 00000000000005f1 R11: 0000000000000246 R12: 0000000000000000 [ 35.833997] R13: 00007ffc9f2884c0 R14: 0000000000000001 R15: 0000000000674640 [ 35.834923] Code: 24 30 bb 01 00 00 00 45 31 f6 eb 5e 8b 50 08 83 c2 07 83 e2 fc 83 c2 70 49 8b 07 48 8b 40 70 48 85 c0 74 10 48 89 14 24 4c 89 ff <ff> d0 48 8b 14 24 48 01 c2 49 01 d6 45 85 ed 74 05 41 83 47 2c [ 35.837442] RIP: tcf_action_init+0x90/0x190 RSP: ffffb8edc068b9a0 [ 35.838291] ---[ end trace a095c06ee4b97a26 ]--- Fixes: d0f6dd8a ("net/sched: Introduce act_tunnel_key") Signed-off-by: Roman Mashak <mrv@mojatatu.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
Closing of a listen socket wakes up kernel_accept() of smc_tcp_listen_worker(), and then has to wait till smc_tcp_listen_worker() gives up the internal clcsock. The wait logic introduced with commit 127f4970 ("net/smc: release clcsock from tcp_listen_worker") might wait longer than necessary. This patch implements the idea to implement the wait just with flush_work(), and gets rid of the extra smc_close_wait_listen_clcsock() function. Fixes: 127f4970 ("net/smc: release clcsock from tcp_listen_worker") Reported-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 14 Mar, 2018 13 commits
-
-
Cathy Zhou authored
The NETIF_F_GSO_SOFTWARE implies support for GSO on SCTP, but the sunvnet driver does not support GSO for sctp. Here we remove the NETIF_F_GSO_SOFTWARE feature flag and only report NETIF_F_ALL_TSO instead. Signed-off-by: Cathy Zhou <Cathy.Zhou@Oracle.COM> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.16-20180314' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-03-14 this is a pull request of two patches for net/master. Both patches are by Andri Yngvason and fix problems in the cc770 driver, that show up quite fast on RT systems, but also on non RT setups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jonathan Toppins authored
The problem was introduced in commit 506b0a39 ("[netdrv] tg3: APE heartbeat changes"). The bug occurs because tp->lock spinlock is held which is obtained in tg3_start by way of tg3_full_lock(), line 11571. The documentation for usleep_range() specifically states it cannot be used inside a spinlock. Fixes: 506b0a39 ("[netdrv] tg3: APE heartbeat changes") Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sabrina Dubroca authored
Prior to the rework of PMTU information storage in commit 2c8cec5c ("ipv4: Cache learned PMTU information in inetpeer."), when a PMTU event advertising a PMTU smaller than net.ipv4.route.min_pmtu was received, we would disable setting the DF flag on packets by locking the MTU metric, and set the PMTU to net.ipv4.route.min_pmtu. Since then, we don't disable DF, and set PMTU to net.ipv4.route.min_pmtu, so the intermediate router that has this link with a small MTU will have to drop the packets. This patch reestablishes pre-2.6.39 behavior by splitting rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu. rt_mtu_locked indicates that we shouldn't set the DF bit on that path, and is checked in ip_dont_fragment(). One possible workaround is to set net.ipv4.route.min_pmtu to a value low enough to accommodate the lowest MTU encountered. Fixes: 2c8cec5c ("ipv4: Cache learned PMTU information in inetpeer.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Madalin Bucur says: ==================== DPAA Ethernet fixes This patch set is addressing several issues in the DPAA Ethernet driver suite: - module unload crash caused by wrong reference to device being left in the cleanup code after the DSA related changes - scheduling wile atomic bug in QMan code revealed during dpaa_eth module unload - a couple of error counter fixes, a duplicated init in dpaa_eth. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Camelia Groza authored
The tx_errors counter is incremented by the dpaa_xmit caller. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Camelia Groza authored
Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Camelia Groza authored
The fd_format has already been initialized at this point. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
The recent changes that make the driver probing compatible with DSA were not propagated in the dpa_remove() function, breaking the module unload function. Using the proper device to address the issue. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
The wait_for_completion() call in qman_delete_cgr_safe() was triggering a scheduling while atomic bug, replacing the kthread with a smp_call_function_single() call to fix it. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Andrei Vagin reported a KASAN: slab-out-of-bounds error in skb_update_prio() Since SYNACK might be attached to a request socket, we need to get back to the listener socket. Since this listener is manipulated without locks, add const qualifiers to sock_cgroup_prioidx() so that the const can also be used in skb_update_prio() Also add the const qualifier to sock_cgroup_classid() for consistency. Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andri Yngvason authored
While waiting for the TX object to send an RTR, an external message with a matching id can overwrite the TX data. In this case we must call the rx routine and then try transmitting the message that was overwritten again. The queue was being stalled because the RX event did not generate an interrupt to wake up the queue again and the TX event did not happen because the TXRQST flag is reset by the chip when new data is received. According to the CC770 datasheet the id of a message object should not be changed while the MSGVAL bit is set. This has been fixed by resetting the MSGVAL bit before modifying the object in the transmit function and setting it after. It is not enough to set & reset CPUUPD. It is important to keep the MSGVAL bit reset while the message object is being modified. Otherwise, during RTR transmission, a frame with matching id could trigger an rx-interrupt, which would cause a race condition between the interrupt routine and the transmit function. Signed-off-by: Andri Yngvason <andri.yngvason@marel.com> Tested-by: Richard Weinberger <richard@nod.at> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Andri Yngvason authored
This has been reported to cause stalls on rt-linux. Suggested-by: Richard Weinberger <richard@nod.at> Tested-by: Richard Weinberger <richard@nod.at> Signed-off-by: Andri Yngvason <andri.yngvason@marel.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
- 13 Mar, 2018 4 commits
-
-
Dan Carpenter authored
We're dereferencing "p_hwfn->p_rdma_info" but that is freed on the line before in qed_rdma_resc_free(p_hwfn). Fixes: 9de506a5 ("qed: Free RoCE ILT Memory on rmmod qedr") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2018-03-13 1) Refuse to insert 32 bit userspace socket policies on 64 bit systems like we do it for standard policies. We don't have a compat layer, so inserting socket policies from 32 bit userspace will lead to a broken configuration. 2) Make the policy hold queue work without the flowcache. Dummy bundles are not chached anymore, so we need to generate a new one on each lookup as long as the SAs are not yet in place. 3) Fix the validation of the esn replay attribute. The The sanity check in verify_replay() is bypassed if the XFRM_STATE_ESN flag is not set. Fix this by doing the sanity check uncoditionally. From Florian Westphal. 4) After most of the dst_entry garbage collection code is removed, we may leak xfrm_dst entries as they are neither cached nor tracked somewhere. Fix this by reusing the 'uncached_list' to track xfrm_dst entries too. From Xin Long. 5) Fix a rcu_read_lock/rcu_read_unlock imbalance in xfrm_get_tos() From Xin Long. 6) Fix an infinite loop in xfrm_get_dst_nexthop. On transport mode we fetch the child dst_entry after we continue, so this pointer is never updated. Fix this by fetching it before we continue. 7) Fix ESN sequence number gap after IPsec GSO packets. We accidentally increment the sequence number counter on the xfrm_state by one packet too much in the ESN case. Fix this by setting the sequence number to the correct value. 8) Reset the ethernet protocol after decapsulation only if a mac header was set. Otherwise it breaks configurations with TUN devices. From Yossi Kuperman. 9) Fix __this_cpu_read() usage in preemptible code. Use this_cpu_read() instead in ipcomp_alloc_tfms(). From Greg Hackmann. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Greg Hackmann authored
f7c83bcb ("net: xfrm: use __this_cpu_read per-cpu helper") added a __this_cpu_read() call inside ipcomp_alloc_tfms(). At the time, __this_cpu_read() required the caller to either not care about races or to handle preemption/interrupt issues. 3.15 tightened the rules around some per-cpu operations, and now __this_cpu_read() should never be used in a preemptible context. On 3.15 and later, we need to use this_cpu_read() instead. syzkaller reported this leading to the following kernel BUG while fuzzing sendmsg: BUG: using __this_cpu_read() in preemptible [00000000] code: repro/3101 caller is ipcomp_init_state+0x185/0x990 CPU: 3 PID: 3101 Comm: repro Not tainted 4.16.0-rc4-00123-g86f84779 #154 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0xb9/0x115 check_preemption_disabled+0x1cb/0x1f0 ipcomp_init_state+0x185/0x990 ? __xfrm_init_state+0x876/0xc20 ? lock_downgrade+0x5e0/0x5e0 ipcomp4_init_state+0xaa/0x7c0 __xfrm_init_state+0x3eb/0xc20 xfrm_init_state+0x19/0x60 pfkey_add+0x20df/0x36f0 ? pfkey_broadcast+0x3dd/0x600 ? pfkey_sock_destruct+0x340/0x340 ? pfkey_seq_stop+0x80/0x80 ? __skb_clone+0x236/0x750 ? kmem_cache_alloc+0x1f6/0x260 ? pfkey_sock_destruct+0x340/0x340 ? pfkey_process+0x62a/0x6f0 pfkey_process+0x62a/0x6f0 ? pfkey_send_new_mapping+0x11c0/0x11c0 ? mutex_lock_io_nested+0x1390/0x1390 pfkey_sendmsg+0x383/0x750 ? dump_sp+0x430/0x430 sock_sendmsg+0xc0/0x100 ___sys_sendmsg+0x6c8/0x8b0 ? copy_msghdr_from_user+0x3b0/0x3b0 ? pagevec_lru_move_fn+0x144/0x1f0 ? find_held_lock+0x32/0x1c0 ? do_huge_pmd_anonymous_page+0xc43/0x11e0 ? lock_downgrade+0x5e0/0x5e0 ? get_kernel_page+0xb0/0xb0 ? _raw_spin_unlock+0x29/0x40 ? do_huge_pmd_anonymous_page+0x400/0x11e0 ? __handle_mm_fault+0x553/0x2460 ? __fget_light+0x163/0x1f0 ? __sys_sendmsg+0xc7/0x170 __sys_sendmsg+0xc7/0x170 ? SyS_shutdown+0x1a0/0x1a0 ? __do_page_fault+0x5a0/0xca0 ? lock_downgrade+0x5e0/0x5e0 SyS_sendmsg+0x27/0x40 ? __sys_sendmsg+0x170/0x170 do_syscall_64+0x19f/0x640 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f0ee73dfb79 RSP: 002b:00007ffe14fc15a8 EFLAGS: 00000207 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0ee73dfb79 RDX: 0000000000000000 RSI: 00000000208befc8 RDI: 0000000000000004 RBP: 00007ffe14fc15b0 R08: 00007ffe14fc15c0 R09: 00007ffe14fc15c0 R10: 0000000000000000 R11: 0000000000000207 R12: 0000000000400440 R13: 00007ffe14fc16b0 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
-
Florian Fainelli authored
During the conversion to dsa_is_user_port(), a condition ended up being reversed, which would prevent the creation of any user port when using the legacy binding and/or platform data, fix that. Fixes: 4a5b85ff ("net: dsa: use dsa_is_user_port everywhere") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-