- 23 Jun, 2020 10 commits
-
-
Kalle Valo authored
ath11k should not be spamming these to the logs. If these are important they should be debug messages, but I just remove them for now. Compile tested only. Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-10-git-send-email-kvalo@codeaurora.org
-
Kalle Valo authored
Use the helper added in previous comment to create the full path, instead of doing it manually. No functional changes. Compile tested only. Signed-off-by:
-
Kalle Valo authored
The downside of using defines in struct ath11k_hw_params.fw.dir is that it's easy to get it wrong as the full path is not visible. So drop the use of defines and instead create the patch runtime using a static inline function ath11k_core_create_firmware_path(). Hopefully this reduces the chances of using incorrect firmware path. No functional changes. Compile tested only. Signed-off-by:
-
Kalle Valo authored
To avoid duplicating the logic how the full firmware path is created create a common function ath11k_core_firmware_request() and convert also qmi.c to use it. Also remove a useless info print, it's more like a debug message anyway. No functional changes. Compile tested only. Signed-off-by:
-
Anilkumar Kolli authored
bdf-addr is different for IPQ8074 and IPQ6018 so add it to hw_params. No functional changes. Compile tested only. Signed-off-by:
Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by:
-
Anilkumar Kolli authored
pdev_id to hw_mac is different for ipq8074 and ipq6018 Below table has the mapping pdev_id ipq8074 ipq6018 ------- ------- ------- 0 0 0 1 2 1 2 1 Not applicable No functional changes. Compile tested only. Signed-off-by:
-
Anilkumar Kolli authored
IPQ6018 needs different value for max_radios so make it configurable via hw_params. No functional changes. Compile tested only. Signed-off-by:
-
Anilkumar Kolli authored
Convert to ath11k_hw_params to an array to make it possible add new hardware in the future, for example IPQ6018 or QCA6390. No functional changes. Compile tested only. Signed-off-by:
-
Anilkumar Kolli authored
This is needed to init .max_radios in hw_params and onfigure external interrupts for available pdev_ids. Compile tested only. Signed-off-by:
-
Zekun Shen authored
A compromized ath10k peripheral is able to control the size argument of memcpy in ath10k_pci_hif_exchange_bmi_msg. The min result from previous line is not used as the size argument for memcpy. Instead, xfer.resp_len comes from untrusted stream dma input. The value comes from "nbytes" in ath10k_pci_bmi_recv_data, which is set inside _ath10k_ce_completed_recv_next_nolock with the line nbytes = __le16_to_cpu(sdesc.nbytes); sdesc is a stream dma region which device can write to. Signed-off-by:
Zekun Shen <bruceshenzk@gmail.com> Signed-off-by:
-
- 16 Jun, 2020 6 commits
-
-
Anilkumar Kolli authored
Rename default BDF to make it consistent with board-2.bin naming. Signed-off-by:
-
Anilkumar Kolli authored
We need this so that all hardware versions can coexist and it's easier to manage everything then all hardware directories are under ath11k directory. Copy ath11k firmware files to /lib/firmware/ath11k/IPQ8074/hw2.0/ Signed-off-by:
-
Loic Poulain authored
Packet encoding, bandwidth and bitrate can be derived from the wcn36xx rate_idx, part of the buffer descriptor. Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
Venkateswara Naralasetty authored
It is expected that the returned counters by .get_survey are monotonic increasing. But the data from ath10k gets reset to zero regularly. Channel active/busy time are then showing incorrect values (less than previous or sometimes zero) for the currently active channel during successive survey dump commands. example: $ iw dev wlan0 survey dump Survey data from wlan0 frequency: 5180 MHz [in use] channel active time: 54995 ms channel busy time: 432 ms channel receive time: 0 ms channel transmit time: 59 ms ... $ iw dev wlan0 survey dump Survey data from wlan0 frequency: 5180 MHz [in use] channel active time: 32592 ms channel busy time: 254 ms channel receive time: 0 ms channel transmit time: 0 ms ... The correct way to handle this is to use the non-clearing WMI_BSS_SURVEY_REQ_TYPE_READ wmi_bss_survey_req_type. The firmware will then accumulate the survey data and handle wrap arounds. Tested-on: QCA9984 hw1.0 10.4-3.5.3-00057 Tested-on: QCA988X hw2.0 10.2.4-1.0-00047 Tested-on: QCA9888 hw2.0 10.4-3.9.0.2-00024 Tested-on: QCA4019 hw1.0 10.4-3.6-00140 Fixes: fa7937e3 ("ath10k: update bss channel survey information") Signed-off-by:
Venkateswara Naralasetty <vnaralas@codeaurora.org> Tested-by:
Markus Theil <markus.theil@tu-ilmenau.de> Tested-by:
John Deere <24601deerej@gmail.com> [sven@narfation.org: adjust commit message] Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
-
Venkateswara Naralasetty authored
When tx status enabled, retry count is updated from tx completion status. which is not working as expected due to firmware limitation where firmware can not provide per MSDU rate statistics from tx completion status. Due to this tx retry count is always 0 in station dump. Fix this issue by updating the retry packet count from per peer statistics. This patch will not break on SDIO devices since, this retry count is already updating from peer statistics for SDIO devices. Tested-on: QCA9984 PCI 10.4-3.6-00104 Tested-on: QCA9882 PCI 10.2.4-1.0-00047 Signed-off-by:
-
Douglas Anderson authored
On wcn3990 we have "per_ce_irq = true". That makes the ath10k_ce_interrupt_summary() function always return 0xfff. The ath10k_ce_per_engine_service_any() function will see this and think that _all_ copy engines have an interrupt. Without checking, the ath10k_ce_per_engine_service() assumes that if it's called that the "copy complete" (cc) interrupt fired. This combination seems bad. Let's add a check to make sure that the "copy complete" interrupt actually fired in ath10k_ce_per_engine_service(). This might fix a hard-to-reproduce failure where it appears that the copy complete handlers run before the copy is really complete. Specifically a symptom was that we were seeing this on a Qualcomm sc7180 board: arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x7fdd45780, fsynr=0x30003, cbfrsynra=0xc1, cb=10 Even on platforms that don't have wcn3990 this still seems like it would be a sane thing to do. Specifically the current IRQ handler comments indicate that there might be other misc interrupt sources firing that need to be cleared. If one of those sources was the one that caused the IRQ handler to be called it would also be important to double-check that the interrupt we cared about actually fired. Tested-on: WCN3990 SNOC WLAN.HL.3.2.2-00490-QCAHLSWMTPL-1 Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
- 15 Jun, 2020 8 commits
-
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next First set of patches intended for v5.9 * Fix links to wiki; * Some preparations for gcc-10; * Make FW reconfiguration quieter by not using warn level; * Some other small fixes and clean-up; # gpg: Signature made Thu 11 Jun 2020 12:03:51 PM EEST using RSA key ID 1A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>" # gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.9. Major changes: ath11k * add 6G band support * add spectral scan support
-
Venkateswara Naralasetty authored
Currently need ptk/gtk wmi peer flags in wmi peer assoc cmd are set based on the rsnie and wpaie of the bss from the bss list. Since this bss list is not updated with current BSSID for AP mode, we may not find bss from the bss list. Which results in ptk/gtk peer flags are not set in the wmi peer assoc cmd. Due to this EAPOL frames are going in data rates instead of management rates. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Sriram R authored
Add support for collecting and dumping the ring backpressure stats via debugfs. Stats are dumped only if events are received for the specific ring. Below command can be used to obtain these stats as part of soc dp stats. cat /sys/kernel/debug/ath11k/ipq8074/soc_dp_stats Sample Output - When No stats available: Backpressure Stats ================== No Ring Backpressure stats received Sample Output - When ring bp stats available for specific ring Backpressure Stats ================== Ring: REO2SW1_RING count: 1 hp: 2 tp: 2 seen before: 4ms Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01213-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Sriram R <srirrama@codeaurora.org> Signed-off-by:
-
Sriram R authored
Add support for dp tx error stats which logs tx failure reasons due to ring full condition, etc. This stats is added in soc_dp_stats which was earlier used as soc_rx_stats so that all dp related info are logged in same file. Below is an example usage, root@OpenWrt:/# cat /sys/kernel/debug/ath11k/ipq8074/soc_dp_stats SOC RX STATS: err ring pkts: 0 Invalid RBM: 0 <snip> SOC TX STATS: Ring Full Failures: ring0: 4 ring1: 3 ring2: 5 Misc Transmit Failures: 2 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01213-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Sowmiya Sree Elavalagan authored
Removed reo cmd lock and unlock which was acquiring the lock immediately after unlock. Done for code clean up. Signed-off-by:
Sowmiya Sree Elavalagan <ssreeela@codeaurora.org> Signed-off-by:
-
Karthikeyan Periyasamy authored
spectral scan control interface is exposed through debugfs eentry. Relayfs is used to collect the spectral data. These interfaces are similar to ath10k spectral. spectral debugfs interfaces are below, echo background > /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan_ctl echo trigger > /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan_ctl iw dev wlan0 scan echo disable > /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan_ctl cat /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan0 > fft_samples.dump Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by:
-
Karthikeyan Periyasamy authored
Add direct buffer ring (dbring) with helper API, which is used by the spectral scan. Initialise the direct buffer ring based on the dma ring capability, which get announced in the wmi service ready extended event. This ring is slightly changed from data path rings. Compare to data path ring this ring shares the hp and tp address to firmware though WMI commands. Also the replenish buffer size is derived from firmware announcement. driver receive indication through WMI event WMI_PDEV_DMA_RING_BUF_RELEASE_EVENTID. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
- 14 Jun, 2020 4 commits
-
-
Linus Torvalds authored
-
git://github.com/micah-morton/linuxLinus Torvalds authored
Pull SafeSetID update from Micah Morton: "Add additional LSM hooks for SafeSetID SafeSetID is capable of making allow/deny decisions for set*uid calls on a system, and we want to add similar functionality for set*gid calls. The work to do that is not yet complete, so probably won't make it in for v5.8, but we are looking to get this simple patch in for v5.8 since we have it ready. We are planning on the rest of the work for extending the SafeSetID LSM being merged during the v5.9 merge window" * tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux: security: Add LSM hooks to set*gid syscalls
-
Thomas Cedeno authored
The SafeSetID LSM uses the security_task_fix_setuid hook to filter set*uid() syscalls according to its configured security policy. In preparation for adding analagous support in the LSM for set*gid() syscalls, we add the requisite hook here. Tested by putting print statements in the security_task_fix_setgid hook and seeing them get hit during kernel boot. Signed-off-by:
Thomas Cedeno <thomascedeno@google.com> Signed-off-by:
Micah Morton <mortonm@chromium.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "This reverts the direct io port to iomap infrastructure of btrfs merged in the first pull request. We found problems in invalidate page that don't seem to be fixable as regressions or without changing iomap code that would not affect other filesystems. There are four reverts in total, but three of them are followup cleanups needed to revert a43a67a2 cleanly. The result is the buffer head based implementation of direct io. Reverts are not great, but under current circumstances I don't see better options" * tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Revert "btrfs: switch to iomap_dio_rw() for dio" Revert "fs: remove dio_end_io()" Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK" Revert "btrfs: split btrfs_direct_IO to read and write part"
-
- 13 Jun, 2020 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ... -
David Sterba authored
This reverts commit a43a67a2. This patch reverts the main part of switching direct io implementation to iomap infrastructure. There's a problem in invalidate page that couldn't be solved as regression in this development cycle. The problem occurs when buffered and direct io are mixed, and the ranges overlap. Although this is not recommended, filesystems implement measures or fallbacks to make it somehow work. In this case, fallback to buffered IO would be an option for btrfs (this already happens when direct io is done on compressed data), but the change would be needed in the iomap code, bringing new semantics to other filesystems. Another problem arises when again the buffered and direct ios are mixed, invalidation fails, then -EIO is set on the mapping and fsync will fail, though there's no real error. There have been discussions how to fix that, but revert seems to be the least intrusive option. Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/Signed-off-by:
David Sterba <dsterba@suse.com>
-
Grygorii Strashko authored
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow unregistered mcast packets to pass. This happens, because ALE VLAN entries on these SoCs do not contain port masks for reg/unreg mcast packets, but instead store indexes of ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for reg/unreg mcast packets. This path was missed by commit 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled"). Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti(). Fixes: 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
The ALE parameters structure is created on stack, so it has to be reset before passing to cpsw_ale_create() to avoid garbage values. Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2020-06-12 The following pull-request contains BPF updates for your *net* tree. We've added 26 non-merge commits during the last 10 day(s) which contain a total of 27 files changed, 348 insertions(+), 93 deletions(-). The main changes are: 1) sock_hash accounting fix, from Andrey. 2) libbpf fix and probe_mem sanitizing, from Andrii. 3) sock_hash fixes, from Jakub. 4) devmap_val fix, from Jesper. 5) load_bytes_relative fix, from YiFei. ==================== Signed-off-by: -
Liao Pingfang authored
Looking into the context (atomic!) and the error message should be dropped. Signed-off-by:
Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by:
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: "12 cifs/smb3 fixes, 2 for stable. - add support for idsfromsid on create and chgrp/chown allowing ability to save owner information more naturally for some workloads - improve query info (getattr) when SMB3.1.1 posix extensions are negotiated by using new query info level" * tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: Add debug message for new file creation with idsfromsid mount option cifs: fix chown and chgrp when idsfromsid mount option enabled smb3: allow uid and gid owners to be set on create with idsfromsid mount option smb311: Add tracepoints for new compound posix query info smb311: add support for using info level for posix extensions query smb311: Add support for lookup with posix extensions query info smb311: Add support for SMB311 query info (non-compounded) SMB311: Add support for query info using posix extensions (level 100) smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl smb3: fix typo in mount options displayed in /proc/mounts cifs: Add get_security_type_str function to return sec type. smb3: extend fscache mount volume coherency check -
Linus Torvalds authored
Let's keep "git status" happy and quiet. Fixes: 9762dc14 ("samples: add binderfs sample program Fixes: fca5e949 ("samples: binderfs: really compile this sample and fix build issues") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
I'm not convinced the script makes useful automaed help lines anyway, but since we're trying to deprecate the use of "---help---" in Kconfig files, let's fix the doc example code too. See commit a7f7f624 ("treewide: replace '---help---' in Kconfig files with 'help'") Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is the set of changes collected since just before the merge window opened. It's mostly minor fixes in drivers. The one non-driver set is the three optical disk (sr) changes where two are error path fixes and one is a helper conversion. The big driver change is the hpsa compat_alloc_userspace rework by Al so he can kill the remaining user. This has been tested and acked by the maintainer" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits) scsi: acornscsi: Fix an error handling path in acornscsi_probe() scsi: storvsc: Remove memset before memory freeing in storvsc_suspend() scsi: cxlflash: Remove an unnecessary NULL check scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM scsi: sr: Fix sr_probe() missing deallocate of device minor scsi: sr: Fix sr_probe() missing mutex_destroy scsi: st: Convert convert get_user_pages() --> pin_user_pages() scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb() scsi: target: Fix NULL pointer dereference scsi: target: Initialize LUN in transport_init_se_cmd() scsi: target: Factor out a new helper, target_cmd_init_cdb() scsi: hpsa: hpsa_ioctl(): Tidy up a bit scsi: hpsa: Get rid of compat_alloc_user_space() scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl() scsi: ufs: Remove redundant urgent_bkop_lvl initialization scsi: ufs: Don't update urgent bkops level when toggling auto bkops scsi: qedf: Remove redundant initialization of variable rc scsi: mpt3sas: Fix memset() in non-RDPQ mode scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "I2C has quite some patches for you this time. I hope it is the move to per-driver-maintainers which is now showing results. We will see. The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI), larger refactoring of the Designware, Tegra, and PXA drivers, the Cadence driver supports being a slave now, and there is support to instanciate SPD eeproms for well-known cases (which will be user-visible because the i801 driver supports it), and some devm_platform_ioremap_resource() conversions which blow up the diffstat. Note that I applied the Nuvoton driver quite late, so some minor fixup patches arrived during the merge window. I chose to apply them right away because they were trivial" * 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits) i2c: Drop stray comma in MODULE_AUTHOR statements i2c: npcm7xx: npcm_i2caddr[] can be static MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC i2c: npcm7xx: Fix a couple of error codes in probe i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n i2c: npcm7xx: Remove unnecessary parentheses i2c: npcm7xx: Add support for slave mode for Nuvoton i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver dt-bindings: i2c: npcm7xx: add NPCM I2C controller i2c: pxa: don't error out if there's no pinctrl i2c: add 'single-master' property to generic bindings i2c: designware: Add Baikal-T1 System I2C support i2c: designware: Move reg-space remapping into a dedicated function i2c: designware: Retrieve quirk flags as early as possible i2c: designware: Convert driver to using regmap API i2c: designware: Discard Cherry Trail model flag i2c: designware: Add Baytrail sem config DW I2C platform dependency i2c: designware: slave: Set DW I2C core module dependency i2c: designware: Use `-y` to build multi-object modules dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller ...
-
