Currently when configuring promiscuous mode on the AVF we detect a
change in the netdev->flags. We use IFF_PROMISC and IFF_ALLMULTI to
determine whether or not we need to request/release promiscuous mode
and/or multicast promiscuous mode. The problem is that the AQ calls for
setting/clearing promiscuous/multicast mode are treated separately. This
leads to a case where we can trigger two promiscuous mode AQ calls in
a row with the incorrect state. To fix this make a few changes.

Use IAVF_FLAG_AQ_CONFIGURE_PROMISC_MODE instead of the previous
IAVF_FLAG_AQ_[REQUEST|RELEASE]_[PROMISC|ALLMULTI] flags.

In iavf_set_rx_mode() detect if there is a change in the
netdev->flags in comparison with adapter->flags and set the
IAVF_FLAG_AQ_CONFIGURE_PROMISC_MODE aq_required bit. Then in
iavf_process_aq_command() only check for IAVF_FLAG_CONFIGURE_PROMISC_MODE
and call iavf_set_promiscuous() if it's set.

In iavf_set_promiscuous() check again to see which (if any) promiscuous
mode bits have changed when comparing the netdev->flags with the
adapter->flags. Use this to set the flags which get sent to the PF
driver.

Add a spinlock that is used for updating current_netdev_promisc_flags
and only allows one promiscuous mode AQ at a time.

[1] Fixes the fact that we will only have one AQ call in the aq_required
queue at any one time.

[2] Streamlines the change in promiscuous mode to only set one AQ
required bit.

[3] This allows us to keep track of the current state of the flags and
also makes it so we can take the most recent netdev->flags promiscuous
mode state.

[4] This fixes the problem where a change in the netdev->flags can cause
IAVF_FLAG_AQ_CONFIGURE_PROMISC_MODE to be set in iavf_set_rx_mode(),
but cleared in iavf_set_promiscuous() before the change is ever made via
AQ call.

Fixes: 47d34839 ("i40evf: Add driver support for promiscuous mode")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Instead of freeing memory of a single VSI, make sure
the memory for all VSIs is cleared before releasing VSIs.
Add releasing of their resources in a loop with the iteration
number equal to the number of allocated VSIs.

Fixes: 41c445ff ("i40e: main driver core")
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

MT7988 SoC support 3 NICs. Fix pse_port configuration in
mtk_flow_set_output_device routine if the traffic is offloaded to eth2.
Rely on mtk_pse_port definitions.

Fixes: 88efedf5 ("net: ethernet: mtk_eth_soc: enable nft hw flowtable_offload for MT7988 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Variable dma_addr in function mtk_poll_rx can be uninitialized on
some of the error paths. In practise this doesn't matter, even random
data present in uninitialized stack memory can safely be used in the
way it happens in the error path.

However, in order to make Smatch happy make sure the variable is
always initialized.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot reported a memory leak like below:

BUG: memory leak
unreferenced object 0xffff88810b088c00 (size 240):
  comm "syz-executor186", pid 5012, jiffies 4294943306 (age 13.680s)
  hex dump (first 32 bytes):
    00 89 08 0b 81 88 ff ff 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff83e5d5ff>] __alloc_skb+0x1ef/0x230 net/core/skbuff.c:634
    [<ffffffff84606e59>] alloc_skb include/linux/skbuff.h:1289 [inline]
    [<ffffffff84606e59>] kcm_sendmsg+0x269/0x1050 net/kcm/kcmsock.c:815
    [<ffffffff83e479c6>] sock_sendmsg_nosec net/socket.c:725 [inline]
    [<ffffffff83e479c6>] sock_sendmsg+0x56/0xb0 net/socket.c:748
    [<ffffffff83e47f55>] ____sys_sendmsg+0x365/0x470 net/socket.c:2494
    [<ffffffff83e4c389>] ___sys_sendmsg+0xc9/0x130 net/socket.c:2548
    [<ffffffff83e4c536>] __sys_sendmsg+0xa6/0x120 net/socket.c:2577
    [<ffffffff84ad7bb8>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<ffffffff84ad7bb8>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
    [<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In kcm_sendmsg(), kcm_tx_msg(head)->last_skb is used as a cursor to append
newly allocated skbs to 'head'. If some bytes are copied, an error occurred,
and jumped to out_error label, 'last_skb' is left unmodified. A later
kcm_sendmsg() will use an obsoleted 'last_skb' reference, corrupting the
'head' frag_list and causing the leak.

This patch fixes this issue by properly updating the last allocated skb in
'last_skb'.

Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module")
Reported-and-tested-by: syzbot+6f98de741f7dbbfc4ccb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6f98de741f7dbbfc4ccbSigned-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the document of napi, there is no rx process when the
budget is 0. Therefore, r8152_poll() has to return 0 directly when the
budget is equal to 0.

Fixes: d2187f8e ("r8152: divide the tx and rx bottom functions")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
Fixes for SJA1105 DSA FDB regressions

A report by Yanan Yang has prompted an investigation into the sja1105
driver's behavior w.r.t. multicast. The report states that when adding
multicast L2 addresses with "bridge mdb add", only the most recently
added address works - the others seem to be overwritten. This is solved
by patch 3/5 (with patch 2/5 as a dependency for it).

Patches 4/5 and 5/5 fix a series of race conditions introduced during
the same patch set as the bug above, namely this one:
https://patchwork.kernel.org/project/netdevbpf/cover/20211024171757.3753288-1-vladimir.oltean@nxp.com/

Finally, patch 1/5 fixes an issue found ever since the introduction of
multicast forwarding offload in sja1105, which is that the multicast
addresses are visible (with the "self" flag) in "bridge fdb show".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, when we add the first sja1105 port to a bridge with
vlan_filtering 1, then we sometimes see this output:

sja1105 spi2.2: port 4 failed to read back entry for be:79:b4:9e:9e:96 vid 3088: -ENOENT
sja1105 spi2.2: Reset switch and programmed static config. Reason: VLAN filtering
sja1105 spi2.2: port 0 failed to add be:79:b4:9e:9e:96 vid 0 to fdb: -2

It is because sja1105_fdb_add() runs from the dsa_owq which is no longer
serialized with switch resets since it dropped the rtnl_lock() in the
blamed commit.

Either performing the FDB accesses before the reset, or after the reset,
is equally fine, because sja1105_static_fdb_change() backs up those
changes in the static config, but FDB access during reset isn't ok.

Make sja1105_static_config_reload() take the fdb_lock to fix that.

Fixes: 0faf890f ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sja1105_fdb_add() runs from the dsa_owq, and sja1105_port_mcast_flood()
runs from switchdev_deferred_process_work(). Prior to the blamed commit,
they used to be indirectly serialized through the rtnl_lock(), which
no longer holds true because dsa_owq dropped that.

So, it is now possible that we traverse the static config BLK_IDX_L2_LOOKUP
elements concurrently compared to when we change them, in
sja1105_static_fdb_change(). That is not ideal, since it might result in
data corruption.

Introduce a mutex which serializes accesses to the hardware FDB and to
the static config elements for the L2 Address Lookup table.

I can't find a good reason to add locking around sja1105_fdb_dump().
I'll add it later if needed.

Fixes: 0faf890f ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit cited in Fixes: did 2 things: it refactored the read-back
polling from sja1105_dynamic_config_read() into a new function,
sja1105_dynamic_config_wait_complete(), and it called that from
sja1105_dynamic_config_write() too.

What is problematic is the refactoring.

The refactored code from sja1105_dynamic_config_poll_valid() works like
the previous one, but the problem is that it uses another packed_buf[]
SPI buffer, and there was code at the end of sja1105_dynamic_config_read()
which was relying on the read-back packed_buf[]:

	/* Don't dereference possibly NULL pointer - maybe caller
	 * only wanted to see whether the entry existed or not.
	 */
	if (entry)
		ops->entry_packing(packed_buf, entry, UNPACK);

After the change, the packed_buf[] that this code sees is no longer the
entry read back from hardware, but the original entry that the caller
passed to the sja1105_dynamic_config_read(), packed into this buffer.

This difference is the most notable with the SJA1105_SEARCH uses from
sja1105pqrs_fdb_add() - used for both fdb and mdb. There, we have logic
added by commit 728db843 ("net: dsa: sja1105: ignore the FDB entry
for unknown multicast when adding a new address") to figure out whether
the address we're trying to add matches on any existing hardware entry,
with the exception of the catch-all multicast address.

That logic was broken, because with sja1105_dynamic_config_read() not
working properly, it doesn't return us the entry read back from
hardware, but the entry that we passed to it. And, since for multicast,
a match will always exist, it will tell us that any mdb entry already
exists at index=0 L2 Address Lookup table. It is index=0 because the
caller doesn't know the index - it wants to find it out, and
sja1105_dynamic_config_read() does:

	if (index < 0) { // SJA1105_SEARCH
		/* Avoid copying a signed negative number to an u64 */
		cmd.index = 0; // <- this
		cmd.search = true;
	} else {
		cmd.index = index;
		cmd.search = false;
	}

So, to the caller of sja1105_dynamic_config_read(), the returned info
looks entirely legit, and it will add all mdb entries to FDB index 0.
There, they will always overwrite each other (not to mention,
potentially they can also overwrite a pre-existing bridge fdb entry),
and the user-visible impact will be that only the last mdb entry will be
forwarded as it should. The others won't (will be flooded or dropped,
depending on the egress flood settings).

Fixing is a bit more complicated, and involves either passing the same
packed_buf[] to sja1105_dynamic_config_wait_complete(), or moving all
the extra processing on the packed_buf[] to
sja1105_dynamic_config_wait_complete(). I've opted for the latter,
because it makes sja1105_dynamic_config_wait_complete() a bit more
self-contained.

Fixes: df405910 ("net: dsa: sja1105: wait for dynamic config command completion on writes too")
Reported-by: Yanan Yang <yanan.yang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, sja1105_dynamic_config_wait_complete() returns either 0 or
-ETIMEDOUT, because it just looks at the read_poll_timeout() return code.

There will be future changes which move some more checks to
sja1105_dynamic_config_poll_valid(). It is important that we propagate
their exact return code (-ENOENT, -EINVAL), because callers of
sja1105_dynamic_config_read() depend on them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 4d942354 ("net: dsa: sja1105: offload bridge port flags to
device") has partially hidden some multicast entries from showing up in
the "bridge fdb show" output, but it wasn't enough. Addresses which are
added through "bridge mdb add" still show up. Hide them all.

Fixes: 291d1e72 ("net: dsa: sja1105: Add support for FDB and MDB management")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, when a new fdb entry is added (with both ports of the
ADIN2111 bridged), the driver configures the MAC filters for the wrong
port, which results in the forwarding being done by the host, and not
actually hardware offloaded.

The ADIN2111 offloads the forwarding by setting filters on the
destination MAC address of incoming frames. Based on these, they may be
routed to the other port. Thus, if a frame has to be forwarded from port
1 to port 2, the required configuration for the ADDR_FILT_UPRn register
should set the APPLY2PORT1 bit (instead of APPLY2PORT2, as it's
currently the case).

Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzbot reports the following uninit-value access problem.

=====================================================
BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:601 [inline]
BUG: KMSAN: uninit-value in hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616
 fill_frame_info net/hsr/hsr_forward.c:601 [inline]
 hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616
 hsr_dev_xmit+0x192/0x330 net/hsr/hsr_device.c:223
 __netdev_start_xmit include/linux/netdevice.h:4889 [inline]
 netdev_start_xmit include/linux/netdevice.h:4903 [inline]
 xmit_one net/core/dev.c:3544 [inline]
 dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3560
 __dev_queue_xmit+0x34d0/0x52a0 net/core/dev.c:4340
 dev_queue_xmit include/linux/netdevice.h:3082 [inline]
 packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
 packet_snd net/packet/af_packet.c:3087 [inline]
 packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119
 sock_sendmsg_nosec net/socket.c:730 [inline]
 sock_sendmsg net/socket.c:753 [inline]
 __sys_sendto+0x781/0xa30 net/socket.c:2176
 __do_sys_sendto net/socket.c:2188 [inline]
 __se_sys_sendto net/socket.c:2184 [inline]
 __ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184
 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
 __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203
 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246
 entry_SYSENTER_compat_after_hwframe+0x70/0x82

Uninit was created at:
 slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767
 slab_alloc_node mm/slub.c:3478 [inline]
 kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523
 kmalloc_reserve+0x148/0x470 net/core/skbuff.c:559
 __alloc_skb+0x318/0x740 net/core/skbuff.c:644
 alloc_skb include/linux/skbuff.h:1286 [inline]
 alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6299
 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2794
 packet_alloc_skb net/packet/af_packet.c:2936 [inline]
 packet_snd net/packet/af_packet.c:3030 [inline]
 packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119
 sock_sendmsg_nosec net/socket.c:730 [inline]
 sock_sendmsg net/socket.c:753 [inline]
 __sys_sendto+0x781/0xa30 net/socket.c:2176
 __do_sys_sendto net/socket.c:2188 [inline]
 __se_sys_sendto net/socket.c:2184 [inline]
 __ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184
 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
 __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203
 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246
 entry_SYSENTER_compat_after_hwframe+0x70/0x82

It is because VLAN not yet supported in hsr driver. Return error
when protocol is ETH_P_8021Q in fill_frame_info() now to fix it.

Fixes: 451d8123 ("net: prp: add packet handling support")
Reported-by: syzbot+bf7e6250c7ce248f3ec9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bf7e6250c7ce248f3ec9Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hangyu Hua says:

====================
Fix possible OOB write when using rule_buf

ADD bounds checks in bcmasp_netfilt_get_all_active and
mvpp2_ethtool_get_rxnfc and mtk_hwlro_get_fdir_all when
using rule_buf from ethtool_get_rxnfc.

v2:
[PATCH v2 1/3]: use -EMSGSIZE instead of truncating the list sliently.
[PATCH v2 3/3]: drop the brackets.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

rule_locs is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rule_locs to avoid NULL pointer dereference.

Fixes: 7aab747e ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

rules is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rules to avoid OOB writing or NULL pointer dereference.

Fixes: 90b509b3 ("net: mvpp2: cls: Add Classification offload support")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

rule_locs is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rule_locs to avoid OOB writing or NULL pointer dereference.

Fixes: c5d511c4 ("net: bcmasp: Add support for wake on net filters")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Setting ethtool -C eth0 tx-usecs 0 is supposed to disable the use of the
coalescing timer but currently it gets programmed with zero delay
instead.

Disable the use of the coalescing timer if tx-usecs is zero by
preventing it from being restarted.  Note that to keep things simple we
don't start/stop the timer when the coalescing settings are changed, but
just let that happen on the next transmit or timer expiry.

Fixes: 8fce3331 ("net: stmmac: Rework coalesce timer and fix multi-queue races")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Guangguan Wang says:

====================
Two fixes for SMC-R
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

While doing smcr_port_add, there maybe linkgroup add into or delete
from smc_lgr_list.list at the same time, which may result kernel crash.
So, use smc_lgr_list.lock to protect smc_lgr_list.list iterate in
smcr_port_add.

The crash calltrace show below:
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 PID: 559726 Comm: kworker/0:92 Kdump: loaded Tainted: G
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 449e491 04/01/2014
Workqueue: events smc_ib_port_event_work [smc]
RIP: 0010:smcr_port_add+0xa6/0xf0 [smc]
RSP: 0000:ffffa5a2c8f67de0 EFLAGS: 00010297
RAX: 0000000000000001 RBX: ffff9935e0650000 RCX: 0000000000000000
RDX: 0000000000000010 RSI: ffff9935e0654290 RDI: ffff9935c8560000
RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9934c0401918
R10: 0000000000000000 R11: ffffffffb4a5c278 R12: ffff99364029aae4
R13: ffff99364029aa00 R14: 00000000ffffffed R15: ffff99364029ab08
FS:  0000000000000000(0000) GS:ffff994380600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000f06a10003 CR4: 0000000002770ef0
PKRU: 55555554
Call Trace:
 smc_ib_port_event_work+0x18f/0x380 [smc]
 process_one_work+0x19b/0x340
 worker_thread+0x30/0x370
 ? process_one_work+0x340/0x340
 kthread+0x114/0x130
 ? __kthread_cancel_work+0x50/0x50
 ret_from_fork+0x1f/0x30

Fixes: 1f90a05d ("net/smc: add smcr_port_add() and smcr_link_up() processing")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the macro SMC_STAT_SERV_SUCC_INC, the smcd_version is used
to determin whether to increase the v1 statistic or the v2
statistic. It is correct for SMCD. But for SMCR, smcr_version
should be used.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The access to page pool `cache' array and the `count' variable
is not locked. Page pool cache access is fine as long as there
is only one consumer per pool.

octeontx2 driver fills in rx buffers from page pool in NAPI context.
If system is stressed and could not allocate buffers, refiiling work
will be delegated to a delayed workqueue. This means that there are
two cosumers to the page pool cache.

Either workqueue or IRQ/NAPI can be run on other CPU. This will lead
to lock less access, hence corruption of cache pool indexes.

To fix this issue, NAPI is rescheduled from workqueue context to refill
rx buffers.

Fixes: b2e3406a ("octeontx2-pf: Add support for page pool")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Inject fault When select CONFIG_VCAP_KUNIT_TEST, the below memory leak
occurs. If kzalloc() for duprule succeeds, but the following
kmemdup() fails, the duprule, ckf and caf memory will be leaked. So kfree
them in the error path.

unreferenced object 0xffff122744c50600 (size 192):
  comm "kunit_try_catch", pid 346, jiffies 4294896122 (age 911.812s)
  hex dump (first 32 bytes):
    10 27 00 00 04 00 00 00 1e 00 00 00 2c 01 00 00  .'..........,...
    00 00 00 00 00 00 00 00 18 06 c5 44 27 12 ff ff  ...........D'...
  backtrace:
    [<00000000394b0db8>] __kmem_cache_alloc_node+0x274/0x2f8
    [<0000000001bedc67>] kmalloc_trace+0x38/0x88
    [<00000000b0612f98>] vcap_dup_rule+0x50/0x460
    [<000000005d2d3aca>] vcap_add_rule+0x8cc/0x1038
    [<00000000eef9d0f8>] test_vcap_xn_rule_creator.constprop.0.isra.0+0x238/0x494
    [<00000000cbda607b>] vcap_api_rule_remove_in_front_test+0x1ac/0x698
    [<00000000c8766299>] kunit_try_run_case+0xe0/0x20c
    [<00000000c4fe9186>] kunit_generic_run_threadfn_adapter+0x50/0x94
    [<00000000f6864acf>] kthread+0x2e8/0x374
    [<0000000022e639b3>] ret_from_fork+0x10/0x20

Fixes: 814e7693 ("net: microchip: vcap api: Add a storage state to a VCAP rule")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

for_each_available_child_of_node performs an of_node_get
on each iteration, so a break out of the loop requires an
of_node_put.

This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Starting with v197, systemd uses predictable interface network names,
the traditional interface naming scheme (eth0) is deprecated, therefore
it cannot be assumed that the eth0 interface exists on the host.

This modification makes the bind_bhash test program run in a separate
network namespace and no longer needs to consider the name of the
network interface on the host.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I got the below warning when do fuzzing test:
unregister_netdevice: waiting for bond0 to become free. Usage count = 2

It can be repoduced via:

ip link add bond0 type bond
sysctl -w net.ipv4.conf.bond0.promote_secondaries=1
ip addr add 4.117.174.103/0 scope 0x40 dev bond0
ip addr add 192.168.100.111/255.255.255.254 scope 0 dev bond0
ip addr add 0.0.0.4/0 scope 0x40 secondary dev bond0
ip addr del 4.117.174.103/0 scope 0x40 dev bond0
ip link delete bond0 type bond

In this reproduction test case, an incorrect 'last_prim' is found in
__inet_del_ifa(), as a result, the secondary address(0.0.0.4/0 scope 0x40)
is lost. The memory of the secondary address is leaked and the reference of
in_device and net_device is leaked.

Fix this problem:
Look for 'last_prim' starting at location of the deleted IP and inserting
the promoted IP into the location of 'last_prim'.

Fixes: 0ff60a45 ("[IPV4]: Fix secondary IP addresses after promotion")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking updates from Jakub Kicinski:
 "Including fixes from netfilter and bpf.

  Current release - regressions:

   - eth: stmmac: fix failure to probe without MAC interface specified

  Current release - new code bugs:

   - docs: netlink: fix missing classic_netlink doc reference

  Previous releases - regressions:

   - deal with integer overflows in kmalloc_reserve()

   - use sk_forward_alloc_get() in sk_get_meminfo()

   - bpf_sk_storage: fix the missing uncharge in sk_omem_alloc

   - fib: avoid warn splat in flow dissector after packet mangling

   - skb_segment: call zero copy functions before using skbuff frags

   - eth: sfc: check for zero length in EF10 RX prefix

  Previous releases - always broken:

   - af_unix: fix msg_controllen test in scm_pidfd_recv() for
     MSG_CMSG_COMPAT

   - xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()

   - netfilter:
      - nft_exthdr: fix non-linear header modification
      - xt_u32, xt_sctp: validate user space input
      - nftables: exthdr: fix 4-byte stack OOB write
      - nfnetlink_osf: avoid OOB read
      - one more fix for the garbage collection work from last release

   - igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU

   - bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t

   - handshake: fix null-deref in handshake_nl_done_doit()

   - ip: ignore dst hint for multipath routes to ensure packets are
     hashed across the nexthops

   - phy: micrel:
      - correct bit assignments for cable test errata
      - disable EEE according to the KSZ9477 errata

  Misc:

   - docs/bpf: document compile-once-run-everywhere (CO-RE) relocations

   - Revert "net: macsec: preserve ingress frame ordering", it appears
     to have been developed against an older kernel, problem doesn't
     exist upstream"

* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
  net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
  Revert "net: team: do not use dynamic lockdep key"
  net: hns3: remove GSO partial feature bit
  net: hns3: fix the port information display when sfp is absent
  net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
  net: hns3: fix debugfs concurrency issue between kfree buffer and read
  net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
  net: hns3: Support query tx timeout threshold by debugfs
  net: hns3: fix tx timeout issue
  net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
  netfilter: nf_tables: Unbreak audit log reset
  netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
  netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
  netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
  netfilter: nfnetlink_osf: avoid OOB read
  netfilter: nftables: exthdr: fix 4-byte stack OOB write
  selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
  bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
  bpf: bpf_sk_storage: Fix invalid wait context lockdep report
  s390/bpf: Pass through tail call counter in trampolines
  ...

Pull more devicetree updates from Rob Herring:
 "A couple of conversions which didn't get picked up by the subsystems
  and one fix:

   - Convert st,stih407-irq-syscfg and Omnivision OV7251 bindings to DT
     schema

   - Merge Omnivision OV5695 into OV5693 binding

   - Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY"

* tag 'devicetree-fixes-for-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: irqchip: convert st,stih407-irq-syscfg to DT schema
  media: dt-bindings: Convert Omnivision OV7251 to DT schema
  media: dt-bindings: Merge OV5695 into OV5693 binding
  of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY

Merge tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Various cleanups and fixes across the board"

* tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (31 commits)
  pwm: lpc32xx: Remove handling of PWM channels
  pwm: atmel: Simplify using devm functions
  dt-bindings: pwm: brcm,kona-pwm: convert to YAML
  pwm: stmpe: Handle errors when disabling the signal
  pwm: stm32: Simplify using devm_pwmchip_add()
  pwm: stm32: Don't modify HW state in .remove() callback
  pwm: Fix order of freeing resources in pwmchip_remove()
  pwm: ntxec: Use device_set_of_node_from_dev()
  pwm: ntxec: Drop a write-only variable from driver data
  pwm: pxa: Don't reimplement of_device_get_match_data()
  pwm: lpc18xx-sct: Simplify using devm_clk_get_enabled()
  pwm: atmel-tcb: Don't track polarity in driver data
  pwm: atmel-tcb: Unroll atmel_tcb_pwm_set_polarity() into only caller
  pwm: atmel-tcb: Put per-channel data into driver data
  pwm: atmel-tcb: Fix resource freeing in error path and remove
  pwm: atmel-tcb: Harmonize resource allocation order
  pwm: Drop unused #include <linux/radix-tree.h>
  pwm: rz-mtu3: Fix build warning 'num_channel_ios' not described
  pwm: Remove outdated documentation for pwmchip_remove()
  pwm: atmel: Enable clk when pwm already enabled in bootloader
  ...

Pull RTC updates from Alexandre Belloni:
 "Subsystem:

   - Add a way for drivers to tell the core the supported alarm range is
     smaller than the date range. This is not used yet but will be
     useful for the alarmtimers in the next release.

   - fix Wvoid-pointer-to-enum-cast warnings

   - remove redundant of_match_ptr()

   - stop warning for invalid alarms when the alarm is disabled

  Drivers:

   - isl12022: allow setting the trip level for battery level detection

   - pcf2127: add support for PCF2131 and multiple timestamps

   - stm32: time precision improvement, many fixes

   - twl: NVRAM support"

* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
  dt-bindings: rtc: ds3231: Remove text binding
  rtc: wm8350: remove unnecessary messages
  rtc: twl: remove unnecessary messages
  rtc: sun6i: remove unnecessary message
  rtc: stop warning for invalid alarms when the alarm is disabled
  rtc: twl: add NVRAM support
  rtc: pcf85363: Allow to wake up system without IRQ
  rtc: m48t86: add DT support for m48t86
  dt-bindings: rtc: Add ST M48T86
  rtc: pcf2127: remove useless check
  rtc: rzn1: Report maximum alarm limit to rtc core
  rtc: ds1305: Report maximum alarm limit to rtc core
  rtc: tps6586x: Report maximum alarm limit to rtc core
  rtc: cmos: Report supported alarm limit to rtc infrastructure
  rtc: cros-ec: Detect and report supported alarm window size
  rtc: Add support for limited alarm timer offsets
  rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
  MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
  rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
  rtc: omap: Do not check for 0 return after calling platform_get_irq()
  ...

Pull i3c updates from Alexandre Belloni:
 "Core:
   - Fix SETDASA when static and dynamic adress are equal
   - Fix cmd_v1 DAA exit criteria

  Drivers:
   - svc: allow probing without any device"

* tag 'i3c/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: svc: fix probe failure when no i3c device exist
  i3c: master: Fix SETDASA process
  dt-bindings: i3c: Fix description for assigned-address
  i3c: master: svc: Describe member 'saved_regs'
  i3c: master: svc: Do not check for 0 return after calling platform_get_irq()
  i3c/master: cmd_v1: Fix the exit criteria for the daa procedure
  i3c: Explicitly include correct DT includes

Merge tag 'regulator-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A couple of fixes that came in during the merge window, both driver
  specific - one for a bug that came up in testing, one for a bug due
  to a misreading of the datasheet"

* tag 'regulator-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps6594-regulator: Fix random kernel crash
  regulator: tps6287x: Fix n_voltages

Pull spi fixes from Mark Brown:
 "A couple of fixes for the sun6i driver. The patch to reduce DMA RX to
  single byte width all the time is *hopefully* excessively cautious but
  it's unclear which SoCs are affected so the fix just covers everything
  for safety"

* tag 'spi-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drain
  spi: sun6i: reduce DMA RX transfer width to single byte

Pull kvm updates from Paolo Bonzini:
 "ARM:

   - Clean up vCPU targets, always returning generic v8 as the preferred
     target

   - Trap forwarding infrastructure for nested virtualization (used for
     traps that are taken from an L2 guest and are needed by the L1
     hypervisor)

   - FEAT_TLBIRANGE support to only invalidate specific ranges of
     addresses when collapsing a table PTE to a block PTE. This avoids
     that the guest refills the TLBs again for addresses that aren't
     covered by the table PTE.

   - Fix vPMU issues related to handling of PMUver.

   - Don't unnecessary align non-stack allocations in the EL2 VA space

   - Drop HCR_VIRT_EXCP_MASK, which was never used...

   - Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
     parameter instead

   - Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()

   - Remove prototypes without implementations

  RISC-V:

   - Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest

   - Added ONE_REG interface for SATP mode

   - Added ONE_REG interface to enable/disable multiple ISA extensions

   - Improved error codes returned by ONE_REG interfaces

   - Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V

   - Added get-reg-list selftest for KVM RISC-V

  s390:

   - PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)

     Allows a PV guest to use crypto cards. Card access is governed by
     the firmware and once a crypto queue is "bound" to a PV VM every
     other entity (PV or not) looses access until it is not bound
     anymore. Enablement is done via flags when creating the PV VM.

   - Guest debug fixes (Ilya)

  x86:

   - Clean up KVM's handling of Intel architectural events

   - Intel bugfixes

   - Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
     debug registers and generate/handle #DBs

   - Clean up LBR virtualization code

   - Fix a bug where KVM fails to set the target pCPU during an IRTE
     update

   - Fix fatal bugs in SEV-ES intrahost migration

   - Fix a bug where the recent (architecturally correct) change to
     reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
     skip it)

   - Retry APIC map recalculation if a vCPU is added/enabled

   - Overhaul emergency reboot code to bring SVM up to par with VMX, tie
     the "emergency disabling" behavior to KVM actually being loaded,
     and move all of the logic within KVM

   - Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
     TSC ratio MSR cannot diverge from the default when TSC scaling is
     disabled up related code

   - Add a framework to allow "caching" feature flags so that KVM can
     check if the guest can use a feature without needing to search
     guest CPUID

   - Rip out the ancient MMU_DEBUG crud and replace the useful bits with
     CONFIG_KVM_PROVE_MMU

   - Fix KVM's handling of !visible guest roots to avoid premature
     triple fault injection

   - Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
     API surface that is needed by external users (currently only
     KVMGT), and fix a variety of issues in the process

  Generic:

   - Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
     events to pass action specific data without needing to constantly
     update the main handlers.

   - Drop unused function declarations

  Selftests:

   - Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs

   - Add support for printf() in guest code and covert all guest asserts
     to use printf-based reporting

   - Clean up the PMU event filter test and add new testcases

   - Include x86 selftests in the KVM x86 MAINTAINERS entry"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
  KVM: x86/mmu: Include mmu.h in spte.h
  KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
  KVM: x86/mmu: Disallow guest from using !visible slots for page tables
  KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
  KVM: x86/mmu: Harden new PGD against roots without shadow pages
  KVM: x86/mmu: Add helper to convert root hpa to shadow page
  drm/i915/gvt: Drop final dependencies on KVM internal details
  KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
  KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
  KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
  KVM: x86/mmu: Assert that correct locks are held for page write-tracking
  KVM: x86/mmu: Rename page-track APIs to reflect the new reality
  KVM: x86/mmu: Drop infrastructure for multiple page-track modes
  KVM: x86/mmu: Use page-track notifiers iff there are external users
  KVM: x86/mmu: Move KVM-only page-track declarations to internal header
  KVM: x86: Remove the unused page-track hook track_flush_slot()
  drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
  KVM: x86: Add a new page-track hook to handle memslot deletion
  drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
  KVM: x86: Reject memslot MOVE operations if KVMGT is attached
  ...

enetc_psi_create() returns an ERR_PTR() or a valid station interface
pointer, but checking for the non-NULL quality of the return code blurs
that difference away. So if enetc_psi_create() fails, we call
enetc_psi_destroy() when we shouldn't. This will likely result in
crashes, since enetc_psi_create() cleans up everything after itself when
it returns an ERR_PTR().

Fixes: f0168042 ("net: enetc: reimplement RFS/RSS memory clearing as PCI quirk")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/netdev/582183ef-e03b-402b-8e2d-6d9bb3c83bd9@moroto.mountain/Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230906141609.247579-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 39285e12.

Looks like the change has unintended consequences in exposing
objects before they are initialized. Let's drop this patch
and try again in net-next.

Reported-by: syzbot+44ae022028805f4600fc@syzkaller.appspotmail.com
Fixes: 39285e12 ("net: team: do not use dynamic lockdep key")
Link: https://lore.kernel.org/all/20230907103124.6adb7256@kernel.org/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull more s390 updates from Heiko Carstens:

 - A couple of virtual vs physical address confusion fixes

 - Rework locking in dcssblk driver to address a lockdep warning

 - Remove support for "noexec" kernel command line option since there is
   no use case where it would make sense

 - Simplify kernel mapping setup and get rid of quite a bit of code

 - Add architecture specific __set_memory_yy() functions which allow us
   to modify kernel mappings. Unlike the set_memory_xx() variants they
   take void pointer start and end parameters, which allows using them
   without the usual casts, and also to use them on areas larger than
   8TB.

   Note that the set_memory_xx() family comes with an int num_pages
   parameter which overflows with 8TB. This could be addressed by
   changing the num_pages parameter to unsigned long, however requires
   to change all architectures, since the module code expects an int
   parameter (see module_set_memory()).

   This was indeed an issue since for debug_pagealloc() we call
   set_memory_4k() on the whole identity mapping. Therefore address this
   for now with the __set_memory_yy() variant, and address common code
   later

 - Use dev_set_name() and also fix memory leak in zcrypt driver error
   handling

 - Remove unused lsi_mask from airq_struct

 - Add warning for invalid kernel mapping requests

* tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/vmem: do not silently ignore mapping limit
  s390/zcrypt: utilize dev_set_name() ability to use a formatted string
  s390/zcrypt: don't leak memory if dev_set_name() fails
  s390/mm: fix MAX_DMA_ADDRESS physical vs virtual confusion
  s390/airq: remove lsi_mask from airq_struct
  s390/mm: use __set_memory() variants where useful
  s390/set_memory: add __set_memory() variant
  s390/set_memory: generate all set_memory() functions
  s390/mm: improve description of mapping permissions of prefix pages
  s390/amode31: change type of __samode31, __eamode31, etc
  s390/mm: simplify kernel mapping setup
  s390: remove "noexec" option
  s390/vmem: fix virtual vs physical address confusion
  s390/dcssblk: fix lockdep warning
  s390/monreader: fix virtual vs physical address confusion

Pull MIPS updates from Thomas Bogendoerfer:
 "Just cleanups and fixes"

* tag 'mips_6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: TXx9: Do PCI error checks on own line
  arch/mips/configs/*_defconfig cleanup
  MIPS: VDSO: Conditionally export __vdso_gettimeofday()
  Mips: loongson3_defconfig: Enable ast drm driver by default
  mips: remove <asm/export.h>
  mips: replace #include <asm/export.h> with #include <linux/export.h>
  mips: remove unneeded #include <asm/export.h>
  MIPS: Loongson64: Fix more __iomem attributes
  MIPS: loongson32: Remove regs-rtc.h
  MIPS: loongson32: Remove regs-clk.h
  MIPS: More explicit DT include clean-ups
  MIPS: Fixup explicit DT include clean-up
  Revert MIPS: Loongson: Fix build error when make modules_install
  MIPS: Only fiddle with CHECKFLAGS if `need-compiler'
  MIPS: Fix CONFIG_CPU_DADDI_WORKAROUNDS `modules_install' regression
  MIPS: Explicitly include correct DT includes

Pull xtensa updates from Max Filippov:

 - enable MTD XIP support

 - fix base address of the xtensa perf module in newer hardware

* tag 'xtensa-20230905' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: add XIP-aware MTD support
  xtensa: PMU: fix base address for the newer hardware