- 12 Mar, 2022 4 commits
-
-
Jakub Kicinski authored
netdev_name_node_alt_create() and netdev_name_node_alt_destroy() are only called by rtnetlink, so no need for exports. Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220310223952.558779-1-kuba@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Saurabh Sengar authored
In function netvsc_process_raw_pkt for VM_PKT_DATA_USING_XFER_PAGES case there is already a 'return' statement which results 'break' as dead code Signed-off-by:
Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Link: https://lore.kernel.org/r/1646933534-29493-1-git-send-email-ssengar@linux.microsoft.comSigned-off-by:
-
Christoph Hellwig authored
Both functions are only used by core networking code. Signed-off-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220310143229.895319-1-hch@lst.deSigned-off-by:
-
Alex Elder authored
In review for commit 8ee7ec48 ("net: ipa: embed interconnect array in the power structure"), Jakub Kicinski suggested that a follow-up patch use struct_size() when computing the size of the IPA power structure, which ends with a flexible array member. Do that. Suggested-by:
Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20220311162423.872645-1-elder@linaro.orgSigned-off-by:
-
- 11 Mar, 2022 36 commits
-
-
Jakub Kicinski authored
Merge tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== brcmfmac * add BCM43454/6 support rtw89 * add support for 160 MHz channels and 6 GHz band * hardware scan support iwlwifi * support UHB TAS enablement via BIOS * remove a bunch of W=1 warnings * add support for channel switch offload * support 32 Rx AMPDU sessions in newer devices * add support for a couple of new devices * add support for band disablement via BIOS mt76 * mt7915 thermal management improvements * SAR support for more mt76 drivers * mt7986 wmac support on mt7915 ath11k * debugfs interface to configure firmware debug log level * debugfs interface to test Target Wake Time (TWT) * provide 802.11ax High Efficiency (HE) data via radiotap ath9k * use hw_random API instead of directly dumping into random.c wcn36xx * fix wcn3660 to work on 5 GHz band ath6kl * add device ID for WLU5150-D81 cfg80211/mac80211 * initial EHT (from 802.11be) support (EHT rates, 320 MHz, larger block-ack) * support disconnect on HW restart * tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits) mac80211: Add support to trigger sta disconnect on hardware restart mac80211: fix potential double free on mesh join mac80211: correct legacy rates check in ieee80211_calc_rx_airtime nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE rtw89: 8852c: process logic efuse map rtw89: 8852c: process efuse of phycap rtw89: support DAV efuse reading operation rtw89: 8852c: add chip::dle_mem rtw89: add page_regs to handle v1 chips rtw89: add chip_info::{h2c,c2h}_reg to support more chips rtw89: add hci_func_en_addr to support variant generation rtw89: add power_{on/off}_func rtw89: read chip version depends on chip ID rtw89: pci: use a struct to describe all registers address related to DMA channel rtw89: pci: add V1 of PCI channel address rtw89: pci: add struct rtw89_pci_info rtw89: 8852c: add 8852c empty files MAINTAINERS: add devicetree bindings entry for mt76 ... ==================== Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.netSigned-off-by:
-
David S. Miller authored
Jonathan Lemon says: ==================== ptp: ocp: support for new firmware This series contains support for new firmware features for the timecard. v1 -> v2: roundup() is not 32-bit safe, use DIV_ROUND_UP_ULL ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jonathan Lemon authored
Add sysfs nodes for the frequency generator and signal counters. Update SMA selector lists for these, and also add the new 'None', 'VCC' 'GND' selectors. Signed-off-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by:
-
Jonathan Lemon authored
The timecard now has 4 general purpose timestampers. Signed-off-by:
-
Jonathan Lemon authored
Input signals can be steered to any of the frequency counters. The counter measures the frequency over a number of seconds: echo 0 > freq1/seconds = turns off measurement echo 1 > freq1/seconds = sets period & turns on measurment. Signed-off-by:
-
Jonathan Lemon authored
The signal generators can be programmed either via the sysfs file or through a PTP_CLK_REQ_PEROUT ioctl request. Signed-off-by:
-
Jonathan Lemon authored
Newer firmware provides 4 programmable signal generators, add support for those here. The signal generators provide the ability to set the period, duty cycle, phase offset, and polarity, with new values defaulting to prior values. The period and phase offset are specified in nanoseconds. E.g: period [duty [phase [polarity]]] echo 500000000 > signal # 1/2 second period echo 1000000 40 100 > signal # 1ms period, 40% on, offset 100ns echo 0 > signal # turn off generator Signed-off-by:
-
Jonathan Lemon authored
Add the ability to group sysfs nodes behind a firmware feature check. This way non-present sysfs attributes are omitted on older firmware, which does not have newer features. This will be used in the upcoming patches which adds more features to the timecard. Signed-off-by:
-
Jonathan Lemon authored
These will provide constant outputs. Signed-off-by:
-
Jonathan Lemon authored
As there are may be 2 GNSS outputs, rename the first one for clarity. This also works around a parsing issue when specifying selectors. Signed-off-by:
-
Jonathan Lemon authored
This adds support for the "IN: None" selector, which disables the input on a sma pin. This should be compatible with old firmware (the firmware will ignore it if not supported). Signed-off-by:
-
Jonathan Lemon authored
Assuming the firmware allows it, the direction of each SMA connector is no longer fixed. Handle remapping directions for each pin. Signed-off-by:
-
Horatiu Vultur authored
When doing manual injection of the frame, it is required to check if the TX FIFO is ready to accept the next word of the frame. For this we are using 'readx_poll_timeout_atomic', the only problem is that before it actually checks the status, is determining the time when to finish polling the status. Which seems to be an expensive operation. Therefore check the status of the TX FIFO before calling 'readx_poll_timeout_atomic'. Doing this will improve the TX bitrate by ~70%. Because 99% the FIFO is ready by that time. The measurements were done using iperf3. Before: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.03 sec 55.2 MBytes 46.2 Mbits/sec 0 sender [ 5] 0.00-10.04 sec 53.8 MBytes 45.0 Mbits/sec receiver After: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.10 sec 95.0 MBytes 78.9 Mbits/sec 0 sender [ 5] 0.00-10.11 sec 95.0 MBytes 78.8 Mbits/sec receiver Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Yihao Han authored
Remove dev_err() messages after platform_get_irq*() failures. platform_get_irq() already prints an error. Generated by: scripts/coccinelle/api/platform_get_irq.cocci Signed-off-by:
Yihao Han <hanyihao@vivo.com> Signed-off-by:
-
Kurt Kanzenbach authored
Commit bf08824a ("flow_dissector: Add support for HSR") added support for HSR within the flow dissector. However, it only works for HSR in version 1. Version 0 uses a different Ether Type. Add support for it. Reported-by:
Anthony Harivel <anthony.harivel@linutronix.de> Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by:
-
Minghao Chi authored
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ) for requesting IRQ's resources any more, as they can be not ready yet in case of DT-booting. platform_get_irq() instead is a recommended way for getting IRQ even if it was not retrieved earlier. It also makes code simpler because we're getting "int" value right away and no conversion from resource to int is required. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq() for DT users only. While at it propagate error code in emac_dev_stop() in case platform_get_irq_optional() fails. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by:
-
Siddharth Vadapalli authored
Convert am65-cpsw driver and am65-cpsw ethtool to use Phylink APIs as described at Documentation/networking/sfp-phylink.rst. All calls to Phy APIs are replaced with their equivalent Phylink APIs. No functional change intended. Use Phylink instead of conventional Phylib, in preparation to add support for SGMII/QSGMII modes. Signed-off-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by:
-
Youghandhar Chintala authored
Currently in case of target hardware restart, we just reconfig and re-enable the security keys and enable the network queues to start data traffic back from where it was interrupted. Many ath10k wifi chipsets have sequence numbers for the data packets assigned by firmware and the mac sequence number will restart from zero after target hardware restart leading to mismatch in the sequence number expected by the remote peer vs the sequence number of the frame sent by the target firmware. This mismatch in sequence number will cause out-of-order packets on the remote peer and all the frames sent by the device are dropped until we reach the sequence number which was sent before we restarted the target hardware In order to fix this, we trigger a sta disconnect, in case of target hw restart. After this there will be a fresh connection and thereby avoiding the dropping of frames by remote peer. The right fix would be to pull the entire data path into the host which is not feasible or would need lots of complex changes and will still be inefficient. Tested on ath10k using WCN3990, QCA6174 Signed-off-by:
Youghandhar Chintala <youghand@codeaurora.org> Link: https://lore.kernel.org/r/20220308115325.5246-2-youghand@codeaurora.orgSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Christophe Leroy authored
Today's implementation of csum_shift() leads to branching based on parity of 'offset' 000002f8 <csum_block_add>: 2f8: 70 a5 00 01 andi. r5,r5,1 2fc: 41 a2 00 08 beq 304 <csum_block_add+0xc> 300: 54 84 c0 3e rotlwi r4,r4,24 304: 7c 63 20 14 addc r3,r3,r4 308: 7c 63 01 94 addze r3,r3 30c: 4e 80 00 20 blr Use first bit of 'offset' directly as input of the rotation instead of branching. 000002f8 <csum_block_add>: 2f8: 54 a5 1f 38 rlwinm r5,r5,3,28,28 2fc: 20 a5 00 20 subfic r5,r5,32 300: 5c 84 28 3e rotlw r4,r4,r5 304: 7c 63 20 14 addc r3,r3,r4 308: 7c 63 01 94 addze r3,r3 30c: 4e 80 00 20 blr And change to left shift instead of right shift to skip one more instruction. This has no impact on the final sum. 000002f8 <csum_block_add>: 2f8: 54 a5 1f 38 rlwinm r5,r5,3,28,28 2fc: 5c 84 28 3e rotlw r4,r4,r5 300: 7c 63 20 14 addc r3,r3,r4 304: 7c 63 01 94 addze r3,r3 308: 4e 80 00 20 blr Seems like only powerpc benefits from a branchless implementation. Other main architectures like ARM or X86 get better code with the generic implementation and its branch. Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2022-03-10 1) Leon removes useless includes from both mlx5 and mlx4 2) Tariq adds node awareness to some object allocations 3) Gal Cleanups and improvements to EEPROM query 4) Paul adds Software steering to Connection Tracking, to speed up CT Rules insertion. Paul Blakey Says: ================= To improve insertion rate, this series allows for using software steering API directly instead of going through the fs_core layer. This can be done for CT because it doesn't need fs_core layer extra facilities, such as autogroups, FTE IDs and modifications (which require a copy of the flow key/mask). Skipping fs_core layer also allows to create the software steering objects (dr_* objects) ahead of time and re-use them for multiple rules, whereas software steering under fs_core creates them on the fly and discards them. This in turn increased insertion rate. The series first introduces a lightweight CT flow steering provider with the first implementations using fs_core layer, and moves CT to use it. The next patches implement a provider using software steering directly, bypassing fs_core, and uses it if software steering is available. ================= ==================== Signed-off-by: -
Linus Lüssing authored
While commit 6a01afcf ("mac80211: mesh: Free ie data when leaving mesh") fixed a memory leak on mesh leave / teardown it introduced a potential memory corruption caused by a double free when rejoining the mesh: ieee80211_leave_mesh() -> kfree(sdata->u.mesh.ie); ... ieee80211_join_mesh() -> copy_mesh_setup() -> old_ie = ifmsh->ie; -> kfree(old_ie); This double free / kernel panics can be reproduced by using wpa_supplicant with an encrypted mesh (if set up without encryption via "iw" then ifmsh->ie is always NULL, which avoids this issue). And then calling: $ iw dev mesh0 mesh leave $ iw dev mesh0 mesh join my-mesh Note that typically these commands are not used / working when using wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids the memory corruption, too. The issue was first observed in an application which was not using wpa_supplicant but "Senf" instead, which implements its own calls to nl80211. Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh join function and leaving it solely up to the mesh leave to free the mesh IE. Cc: stable@vger.kernel.org Fixes: 6a01afcf ("mac80211: mesh: Free ie data when leaving mesh") Reported-by:
Matthias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by:
Linus Lüssing <ll@simonwunderlich.de> Tested-by:
-
MeiChia Chiu authored
There are no legacy rates on 60GHz or sub-1GHz band, so modify the check. Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
MeiChia Chiu <MeiChia.Chiu@mediatek.com> Link: https://lore.kernel.org/r/20220308021645.16272-1-MeiChia.Chiu@mediatek.com [Ghz -> GHz] Signed-off-by:
-
Veerendranath Jakkam authored
It should be NL80211_IFTYPE_OCB instead. Signed-off-by:
Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/1645542399-4680-1-git-send-email-quic_vjakkam@quicinc.comSigned-off-by:
-
Christophe JAILLET authored
Previous memory allocations in this function already use GFP_KERNEL, so use __dev_alloc_skb() and an explicit GFP_KERNEL instead of an implicit GFP_ATOMIC. This gives more opportunities of successful allocation. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/194a0e2ff00c3fae88cc9fba47431747360c8242.1645345378.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Yihao Han authored
Fix the following coccicheck warning: ./drivers/net/wireless/mac80211_hwsim.c:1040:0-23: WARNING: hwsim_fops_rx_rssi should be defined with DEFINE_DEBUGFS_ATTRIBUTE Signed-off-by:
-
Gal Pressman authored
Unlike the legacy EEPROM callbacks, when using the netlink EEPROM query (get_module_eeprom_by_page) the driver should not try to validate the query parameters, but just perform the read requested by the userspace. Recent discussion in the mailing list: https://lore.kernel.org/netdev/20220120093051.70845141@kicinski-fedora-PC1C0HJN.hsd1.ca.comcast.net/Signed-off-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Gal Pressman authored
The assumption that the first byte in the module mapping dword is the module number shouldn't be hard-coded in the driver, but come from mlx5_ifc structs. While at it, fix the incorrect width for the 'rx_lane' and 'tx_lane' fields. Signed-off-by:
-
Gal Pressman authored
The MCIA register supports either 12 or 32 dwords, use the correct value by querying the capability from the MCAM register. Signed-off-by:
-
Paul Blakey authored
SMFS dr matchers are processed sequentially in hardware according to their priorities, and not skipped if empty. Currently, smfs ct fs creates four predefined dr matchers per ct table (ct/ct nat) with hardcoded priority. Compared to dmfs ct fs using autogroups, this might cause additional hops in fastpath for traffic patterns that match later priorties, even if previous priorites are empty, e.g user only using ipv6 UDP traffic will have additional 3 hops. Create the matchers dynamically, using the highest priority available, on first rule usage, and remove them on last usage. Signed-off-by:
Paul Blakey <paulb@nvidia.com> Reviewed-by:
Oz Shlomo <ozsh@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
-
Paul Blakey authored
fs_core layer adds extra book keeping that is either unneeded for CT, or unused by the underlying software steering, such as allocating FTEs and FTE ids, saving the match key and mask, and autogroups management. On top of that, direct steering has a translation layer (fs_dr) from PRM commands to direct steering objects, for example, creating temporary dr_action objects. This has a performance impact when dealing with CT high insertion rate. To use direct steering (smfs) directly for ct, add a tc ct fs smfs implementation. Instead of dmfs autogroups, smfs ct fs uses one of 4 predefined dr matchers in CT and CT-NAT tables, for each combination of tuple ethertype (ipv4/ipv6), and tuple ip_proto (udp/tcp) that is currently used by nf flow table flow offload. At rule insertions, validate the flow rule fits one of the predfined matcher, and insert to it. To fill the dr_actions of the rule efficiently, create the fwd to post_ct tbl dr_action at fs init, the count dr_action at counter creation, and re-use the already pre-allocated modify header dr_action. Signed-off-by:
-
Paul Blakey authored
Add a thin layer that exports selected direct steering (dr) API which will be used by a ct fs implementation in a following patch. Signed-off-by:
Mark Bloch <mbloch@nvidia.com> Reviewed-by:
-
Paul Blakey authored
If sw steering was used to create the table, dr steeering fs creates a backing dr table for the mlx5 flow table. Add helper to return this table so it can be used to create matchers and add rules on it directly instead of passing via eswitch_offloads/fs_core insertion. Signed-off-by:
-
Paul Blakey authored
Currently, fs_core layer provides flow steering services to the driver including: autogroups, allocating FTEs (flow table entries) and FTE ids, and support of fte action modification. If then software steering is configured, rule insertion will go through a translation layer from firmware buffers to software steering objects (see fs_dr.c). The connection tracking table is a system table that is not directly controlled by the user and is a very high scale table. These fs_core services introduces an overhead that may be optimized by using software steering API directly. Introduce ct flow steering interface to allow multiple flow steering providers. Use the new interface to implement the current dmfs (device managed flow steering) provider which uses fs_core insertion. Signed-off-by:
-
Tariq Toukan authored
The function is node-aware and gets the node as an argument. Use a node-aware allocation for the doorbell pgdir structure. Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
Tariq Toukan authored
Prefer the aware allocation, use the device NUMA node. Signed-off-by:
-
