With the arrival of sv48 and its large address space, it would be
cumbersome to statically define the unit size to use to print the different
portions of the virtual memory layout: instead, determine it dynamically.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Because of the stack canary feature that reads from the current task
structure the stack canary value, the thread pointer register "tp" must
be set before calling any C function from head.S: by chance, setup_vm
and all the functions that it calls does not seem to be part of the
functions where the canary check is done, but in the following commits,
some functions will.

Fixes: f2c9699f ("riscv: Add STACKPROTECTOR supported")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

sv48 was just introduced, so add its virtual memory layout to the
documentation.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The spinwait boot method has been superseded by the SBI HSM extension
for some time now, but it still enabled by default.  This causes some
issues on large hart count systems, which will hang if a physical hart
exists that is larger than NR_CPUS.

Users on modern SBI implementation don't need spinwait, and while it's
probably possible to deal with some of the spinwait issues let's just
restrict the default to systems that are likely to actually use it.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20220421170354.10555-1-palmer@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

This add a device tree for Sundance Polarberry, along with various
cleanups to the PolarFire SOC device trees and bindings.

Link: https://lore.kernel.org/r/20220509142610.128590-1-conor.dooley@microchip.com

* 'riscv-pfsoc-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
  riscv: dts: icicle: sort nodes alphabetically
  riscv: microchip: icicle: readability fixes
  riscv: dts: microchip: add the sundance polarberry
  dt-bindings: riscv: microchip: add polarberry compatible string
  dt-bindings: vendor-prefixes: add Sundance DSP
  riscv: dts: microchip: make the fabric dtsi board specific
  dt-bindings: riscv: microchip: document icicle reference design
  riscv: dts: microchip: remove soc vendor from filenames
  riscv: dts: microchip: move sysctrlr out of soc bus
  riscv: dts: microchip: remove icicle memory clocks

The icicle device tree is in a "random" order, so clean it up and sort
its elements alphabetically to match the newly added PolarBerry dts.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220509142610.128590-11-conor.dooley@microchip.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Fix the sort order of the status properties, remove some
extra whitespace in the mmc entry & add whitespace to the mac entry
containing the phys so that the dt is easier to read.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220509142610.128590-10-conor.dooley@microchip.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add a minimal device tree for the PolarFire SoC based Sundance
PolarBerry.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-9-conor.dooley@microchip.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add a binding for the Sundance Polarberry board.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-8-conor.dooley@microchip.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Sundance DSP Inc. (https://www.sundancedsp.com/) is a supplier of
high-performance DSP and FPGA processor boards and I/O modules.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-7-conor.dooley@microchip.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Currently mpfs-fabric.dtsi is included by mpfs.dtsi - which is fine
currently since there is only one board with this SoC upstream.

However if another board was added, it would include the fabric contents
of the Icicle Kit's reference design. To avoid this, rename
mpfs-fabric.dtsi to mpfs-icicle-kit-fabric.dtsi & include it in the dts
rather than mpfs.dtsi.

mpfs-icicle-kit-fabric.dtsi specifically matches the 22.03 reference
design for the icicle kit's FPGA fabric & an older version of the
design may not have the i2c or pwm devices - so add the compatible
string to document this.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-6-conor.dooley@microchip.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add a compatible for the icicle kit's reference design. This represents
the FPGA fabric's contents & is versioned to denote which release of the
reference design it applies to.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220509142610.128590-5-conor.dooley@microchip.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Having the SoC vendor both as the directory and in the filename adds
little. Remove microchip from the filenames so that the files will
resemble the other directories in riscv (and arm64). The new names
follow a soc-board.dts & soc{,-fabric}.dtsi pattern.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-4-conor.dooley@microchip.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The MPFS system controller has no registers of its own, so move it out
of the soc node to avoid dtbs_check warnings:
arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dtb: soc: syscontroller: {'compatible': ['microchip,mpfs-sys-controller'], 'mboxes': [[15, 0]], 'status': ['okay']} should not be valid under {'type': 'object'}
Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Suggested-by: Rob Herring <robh@kernel.org>
Fixes: 528a5b1f ("riscv: dts: microchip: add new peripherals to icicle kit device tree")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-3-conor.dooley@microchip.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The clock properties in the icicle kit's memory entries cause dtbs_check
errors:
arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dtb: /: memory@80000000: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'

Get rid of the clocks to avoid the errors.
Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Fixes: 0fa6107e ("RISC-V: Initial DTS for Microchip ICICLE board")
Fixes: 5b28df37 ("riscv: dts: microchip: update peripherals in icicle kit device tree")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-2-conor.dooley@microchip.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the Svpbmt extension, which allows memory attributes to
   be encoded in pages

 - Support for the Allwinner D1's implementation of page-based memory
   attributes

 - Support for running rv32 binaries on rv64 systems, via the compat
   subsystem

 - Support for kexec_file()

 - Support for the new generic ticket-based spinlocks, which allows us
   to also move to qrwlock. These should have already gone in through
   the asm-geneic tree as well

 - A handful of cleanups and fixes, include some larger ones around
   atomics and XIP

* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
  RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
  riscv: compat: Using seperated vdso_maps for compat_vdso_info
  RISC-V: Fix the XIP build
  RISC-V: Split out the XIP fixups into their own file
  RISC-V: ignore xipImage
  RISC-V: Avoid empty create_*_mapping definitions
  riscv: Don't output a bogus mmu-type on a no MMU kernel
  riscv: atomic: Add custom conditional atomic operation implementation
  riscv: atomic: Optimize dec_if_positive functions
  riscv: atomic: Cleanup unnecessary definition
  RISC-V: Load purgatory in kexec_file
  RISC-V: Add purgatory
  RISC-V: Support for kexec_file on panic
  RISC-V: Add kexec_file support
  RISC-V: use memcpy for kexec_file mode
  kexec_file: Fix kexec_file.c build error for riscv platform
  riscv: compat: Add COMPAT Kbuild skeletal support
  riscv: compat: ptrace: Add compat_arch_ptrace implement
  riscv: compat: signal: Add rt_frame implementation
  riscv: add memory-type errata for T-Head
  ...

Pull iommu updates from Joerg Roedel:

 - Intel VT-d driver updates:
     - Domain force snooping improvement.
     - Cleanups, no intentional functional changes.

 - ARM SMMU driver updates:
     - Add new Qualcomm device-tree compatible strings
     - Add new Nvidia device-tree compatible string for Tegra234
     - Fix UAF in SMMUv3 shared virtual addressing code
     - Force identity-mapped domains for users of ye olde SMMU legacy
       binding
     - Minor cleanups

 - Fix a BUG_ON in the vfio_iommu_group_notifier:
     - Groundwork for upcoming iommufd framework
     - Introduction of DMA ownership so that an entire IOMMU group is
       either controlled by the kernel or by user-space

 - MT8195 and MT8186 support in the Mediatek IOMMU driver

 - Make forcing of cache-coherent DMA more coherent between IOMMU
   drivers

 - Fixes for thunderbolt device DMA protection

 - Various smaller fixes and cleanups

* tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
  iommu/amd: Increase timeout waiting for GA log enablement
  iommu/s390: Tolerate repeat attach_dev calls
  iommu/vt-d: Remove hard coding PGSNP bit in PASID entries
  iommu/vt-d: Remove domain_update_iommu_snooping()
  iommu/vt-d: Check domain force_snooping against attached devices
  iommu/vt-d: Block force-snoop domain attaching if no SC support
  iommu/vt-d: Size Page Request Queue to avoid overflow condition
  iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
  iommu/vt-d: Change return type of dmar_insert_one_dev_info()
  iommu/vt-d: Remove unneeded validity check on dev
  iommu/dma: Explicitly sort PCI DMA windows
  iommu/dma: Fix iova map result check bug
  iommu/mediatek: Fix NULL pointer dereference when printing dev_name
  iommu: iommu_group_claim_dma_owner() must always assign a domain
  iommu/arm-smmu: Force identity domains for legacy binding
  iommu/arm-smmu: Support Tegra234 SMMU
  dt-bindings: arm-smmu: Add compatible for Tegra234 SOC
  dt-bindings: arm-smmu: Document nvidia,memory-controller property
  iommu/arm-smmu-qcom: Add SC8280XP support
  dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP
  ...

Pull microblaze updates from Michal Simek:

 - Fix issues with freestanding

 - Wire memblock_dump_all()

 - Add support for memory reservation from DT

* tag 'microblaze-v5.19' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: fix typos in comments
  microblaze: Add support for reserved memory defined by DT
  microblaze: Wire memblock_dump_all()
  microblaze: Use simple memmove/memcpy implementation from lib/string.c
  microblaze: Do loop unrolling for optimized memset implementation
  microblaze: Use simple memset implementation from lib/string.c

Without this change arch/riscv/kernel/elf_kexec.c fails to compile once
commit 233c1e6c319c ("kexec_file: drop weak attribute from
arch_kexec_apply_relocations[_add]") is also contained in the tree.
This currently happens in next-20220527.

Prepare the RISC-V similar to the s390 adaption done in 233c1e6c319c.
This is safe to do on top of the riscv change even without the change to
arch_kexec_apply_relocations.

Fixes: 838b3e28 ("RISC-V: Load purgatory in kexec_file")
Looks-good-to: liaochang (A) <liaochang1@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull fbdev fixes and updates from Helge Deller:
 "A buch of small fixes and cleanups, including:

   - vesafb: Fix a use-after-free due early fb_info cleanup

   - clcdfb: Fix refcount leak in clcdfb_of_vram_setup

   - hyperv_fb: Allow resolutions with size > 64 MB for Gen1

   - pxa3xx-gcu: release the resources correctly in
     pxa3xx_gcu_probe/remove()

   - omapfb: Prevent compiler warning regarding
     hwa742_update_window_async()"

* tag 'for-5.19/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  video: fbdev: omap: Add prototype for hwa742_update_window_async()
  video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup
  video: fbdev: radeon: Fix spelling typo in comment
  video: fbdev: xen: remove setting of 'transp' parameter
  video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()
  video: fbdev: omapfb: simplify the return expression of nec_8048_connect()
  video: fbdev: omapfb: simplify the return expression of dsi_init_pll_data()
  video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
  video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1

Pull parisc architecture updates from Helge Deller:
 "Minor cleanups and code optimizations, e.g.:

   - improvements in assembly statements in the tmpalias code path

   - added some additionals compile time checks

   - drop some unneccesary assembler DMA syncs"

* tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNT
  parisc: Optimize tmpalias function calls
  parisc: Add dep_safe() macro to deposit a register in 32- and 64-kernels
  parisc: Fix wrong comment for shr macro
  parisc: Prevent ldil() to sign-extend into upper 32 bits
  parisc: Don't hardcode assembler bit definitions in tmpalias code
  parisc: Don't enforce DMA completion order in cache flushes
  parisc: video: fbdev: stifb: Add sti_dump_font() to dump STI font

Pull more power management updates from Rafael Wysocki:
 "These update the ARM cpufreq drivers and fix up the CPPC cpufreq
  driver after recent changes, update the OPP code and PM documentation
  and add power sequences support to the system reboot and power off
  code.

  Specifics:

   - Add Tegra234 cpufreq support (Sumit Gupta)

   - Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
     Rex-BC Chen, and Jia-Wei Chang)

   - Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
     Pierre Gondois)

   - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
     Oudjana)

   - Use list iterator only inside the list_for_each_entry loop
     (Xiaomeng Tong, and Jakob Koschel)

   - New APIs related to finding OPP based on interconnect bandwidth
     (Krzysztof Kozlowski)

   - Fix the missing of_node_put() in _bandwidth_supported() (Dan
     Carpenter)

   - Cleanups (Krzysztof Kozlowski, and Viresh Kumar)

   - Add Out of Band mode description to the intel-speed-select utility
     documentation (Srinivas Pandruvada)

   - Add power sequences support to the system reboot and power off code
     and make related platform-specific changes for multiple platforms
     (Dmitry Osipenko, Geert Uytterhoeven)"

* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
  cpufreq: CPPC: Fix unused-function warning
  cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
  Documentation: admin-guide: PM: Add Out of Band mode
  kernel/reboot: Change registration order of legacy power-off handler
  m68k: virt: Switch to new sys-off handler API
  kernel/reboot: Add devm_register_restart_handler()
  kernel/reboot: Add devm_register_power_off_handler()
  soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
  reboot: Remove pm_power_off_prepare()
  regulator: pfuze100: Use devm_register_sys_off_handler()
  ACPI: power: Switch to sys-off handler API
  memory: emif: Use kernel_can_power_off()
  mips: Use do_kernel_power_off()
  ia64: Use do_kernel_power_off()
  x86: Use do_kernel_power_off()
  sh: Use do_kernel_power_off()
  m68k: Switch to new sys-off handler API
  powerpc: Use do_kernel_power_off()
  xen/x86: Use do_kernel_power_off()
  parisc: Use do_kernel_power_off()
  ...

Pull additional thermal control update from Rafael Wysocki:
 "Add Meteor Lake PCI device ID to the int340x thermal control driver
  (Sumeet Pawnikar)"

* tag 'thermal-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: int340x: Add Meteor Lake PCI device ID

Pull more ACPI updates from Rafael Wysocki:
 "These add some new device IDs, update a few drivers (processor,
  battery, backlight) and clean up code in a few places.

  Specifics:

   - Add Meteor Lake ACPI IDs for DPTF devices (Sumeet Pawnikar)

   - Rearrange find_child_checks() to simplify code (Rafael Wysocki)

   - Use memremap() to map the UCSI mailbox that is always in main
     memory and drop acpi_release_memory() that has no more users
     (Heikki Krogerus, Dan Carpenter)

   - Make max_cstate/nocst/bm_check_disable processor module parameters
     visible in sysfs (Yajun Deng)

   - Fix typo in the CPPC driver (Julia Lawall)

   - Make the ACPI battery driver show the "not-charging" status by
     default unless "charging" or "full" is directly indicated (Werner
     Sembach)

   - Improve the PM notifier in the ACPI backlight driver (Zhang Rui)

   - Clean up some white space in the ACPI code (Ian Cowan)"

* tag 'acpi-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe
  ACPI: DPTF: Support Meteor Lake
  ACPI: CPPC: fix typo in comment
  ACPI: video: improve PM notifer callback
  ACPI: clean up white space in a few places for consistency
  ACPI: glue: Rearrange find_child_checks()
  ACPI: processor: idle: Expose max_cstate/nocst/bm_check_disable read-only in sysfs
  ACPI: battery: Make "not-charging" the default on no charging or full info
  ACPI: OSL: Remove the helper for deactivating memory region
  usb: typec: ucsi: acpi: Map the mailbox with memremap()

Pull overlayfs updates from Miklos Szeredi:

 - Support idmapped layers in overlayfs (Christian Brauner)

 - Add a fix to exportfs that is relevant to open_by_handle_at(2) as
   well

 - Introduce new lookup helpers that allow passing mnt_userns into
   inode_permission()

* tag 'ovl-update-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: support idmapped layers
  ovl: handle idmappings in ovl_xattr_{g,s}et()
  ovl: handle idmappings in layer open helpers
  ovl: handle idmappings in ovl_permission()
  ovl: use ovl_copy_{real,upper}attr() wrappers
  ovl: store lower path in ovl_inode
  ovl: handle idmappings for layer lookup
  ovl: handle idmappings for layer fileattrs
  ovl: use ovl_path_getxattr() wrapper
  ovl: use ovl_lookup_upper() wrapper
  ovl: use ovl_do_notify_change() wrapper
  ovl: pass layer mnt to ovl_open_realfile()
  ovl: pass ofs to setattr operations
  ovl: handle idmappings in creation operations
  ovl: add ovl_upper_mnt_userns() wrapper
  ovl: pass ofs to creation operations
  ovl: use wrappers to all vfs_*xattr() calls
  exportfs: support idmapped mounts
  fs: add two trivial lookup helpers

Pull MIPS updates from Thomas Bogendoerfer:
 "Cleanups and fixes"

* tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (38 commits)
  MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC
  MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA
  MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem()
  MIPS: Kconfig: Fix indentation and add endif comment
  MIPS: bmips: Fix compiler warning observed on W=1 build
  MIPS: Rewrite `csum_tcpudp_nofold' in plain C
  mips: setup: use strscpy to replace strlcpy
  MIPS: Octeon: add SNIC10E board
  MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo.
  MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.
  MIPS: Ingenic: Add PWM nodes for X1830.
  MIPS: Octeon: fix typo in comment
  MIPS: loongson32: Kconfig: Remove extra space
  MIPS: Sibyte: remove unnecessary return variable
  MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation
  selftests/ftrace: Save kprobe_events to test log
  MIPS: tools: no need to initialise statics to 0
  MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon
  MIPS: VR41xx: Drop redundant spinlock initialization
  MIPS: smp: optimization for flush_tlb_mm when exiting
  ...

Pull m68knommu updates from Greg Ungerer:
 "A collection of changes to add elf-fdpic loader support for m68k.

  Also a collection of various fixes. They include typo corrections,
  undefined symbol compilation fixes, removal of the ISA_DMA_API support
  and removal of unused code.

  Summary:

   - correctly set up ZERO_PAGE pointer

   - drop ISA_DMA_API support

   - fix comment typos

   - fixes for undefined symbols

   - remove unused code and variables

   - elf-fdpic loader support for m68k"

* tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: fix 68000 CPU link with no platform selected
  m68k: removed unused "mach_get_ss"
  m68knommu: fix undefined reference to `mach_get_rtc_pll'
  m68knommu: fix undefined reference to `_init_sp'
  m68knommu: allow elf_fdpic loader to be selected
  m68knommu: add definitions to support elf_fdpic program loader
  m68knommu: implement minimal regset support
  m68knommu: use asm-generic/mmu.h for nommu setups
  m68k: fix typos in comments
  m68k: coldfire: drop ISA_DMA_API support
  m68knommu: set ZERO_PAGE() to the allocated zeroed page

Merge ACPI battery and backlight driver update and miscellaneous
cleanup for 5.19-rc1:

 - Make the ACPI battery driver show the "not-charging" status by
   default unless "charging" or "full" is directly indicated (Werner
   Sembach).

 - Improve the PM notifier in the ACPI backlight driver (Zhang Rui).

 - Clean up some white space in the ACPI code (Ian Cowan).

* acpi-battery:
  ACPI: battery: Make "not-charging" the default on no charging or full info

* acpi-video:
  ACPI: video: improve PM notifer callback

* acpi-misc:
  ACPI: clean up white space in a few places for consistency

Merge general ACPI cleanups and processor support updates for 5.19-rc1:

 - Rearrange find_child_checks() to simplify code (Rafael Wysocki).

 - Use memremap() to map the UCSI mailbox that is always in main memory
   and drop acpi_release_memory() that has no more users (Heikki
   Krogerus, Dan Carpenter).

 - Make max_cstate/nocst/bm_check_disable processor module parameters
   visible in sysfs (Yajun Deng).

 - Fix typo in the CPPC driver (Julia Lawall).

* acpi-glue:
  ACPI: glue: Rearrange find_child_checks()

* acpi-osl:
  usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe
  ACPI: OSL: Remove the helper for deactivating memory region
  usb: typec: ucsi: acpi: Map the mailbox with memremap()

* acpi-processor:
  ACPI: processor: idle: Expose max_cstate/nocst/bm_check_disable read-only in sysfs

* acpi-cppc:
  ACPI: CPPC: fix typo in comment

The devm_memremap() function never returns NULL.  It returns error
pointers.

Fixes: cdc3d2ab ("usb: typec: ucsi: acpi: Map the mailbox with memremap()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Those old syscalls aren't exported via our syscall table, so just drop
them.
Signed-off-by: Helge Deller <deller@gmx.de>

Merge system power off handling rework from Dmitry Osipenko for
5.19-rc1.

This introduces a mechanism allowing power sequences to be used for
powering off the system and makes related changes in platform-specific
code for multiple platforms.

* pm-sysoff: (29 commits)
  kernel/reboot: Change registration order of legacy power-off handler
  m68k: virt: Switch to new sys-off handler API
  kernel/reboot: Add devm_register_restart_handler()
  kernel/reboot: Add devm_register_power_off_handler()
  soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
  reboot: Remove pm_power_off_prepare()
  regulator: pfuze100: Use devm_register_sys_off_handler()
  ACPI: power: Switch to sys-off handler API
  memory: emif: Use kernel_can_power_off()
  mips: Use do_kernel_power_off()
  ia64: Use do_kernel_power_off()
  x86: Use do_kernel_power_off()
  sh: Use do_kernel_power_off()
  m68k: Switch to new sys-off handler API
  powerpc: Use do_kernel_power_off()
  xen/x86: Use do_kernel_power_off()
  parisc: Use do_kernel_power_off()
  arm64: Use do_kernel_power_off()
  riscv: Use do_kernel_power_off()
  csky: Use do_kernel_power_off()
  ...

Merge PM documentation update for 5.19-rc1.

* pm-docs:
  Documentation: admin-guide: PM: Add Out of Band mode

Merge OPP (Operating Performance Points) changes for 5.19-rc1:

 - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
   Oudjana).

 - Use list iterator only inside the list_for_each_entry loop (Xiaomeng
   Tong, and Jakob Koschel).

 - New APIs related to finding OPP based on interconnect bandwidth
   (Krzysztof Kozlowski).

 - Fix the missing of_node_put() in _bandwidth_supported() (Dan
   Carpenter).

 - Cleanups (Krzysztof Kozlowski, and Viresh Kumar).

* pm-opp:
  opp: Reorder definition of ceil/floor helpers
  opp: Add apis to retrieve opps with interconnect bandwidth
  dt-bindings: opp: opp-v2-kryo-cpu: Remove SMEM
  opp: use list iterator only inside the loop
  opp: replace usage of found with dedicated list iterator variable
  PM: opp: simplify with dev_err_probe()
  OPP: call of_node_put() on error path in _bandwidth_supported()

Building the cppc_cpufreq driver with for arm64 with
CONFIG_ENERGY_MODEL=n triggers the following warnings:
 drivers/cpufreq/cppc_cpufreq.c:550:12: error: ‘cppc_get_cpu_cost’ defined but not used
[-Werror=unused-function]
   550 | static int cppc_get_cpu_cost(struct device *cpu_dev, unsigned long KHz,
       |            ^~~~~~~~~~~~~~~~~
 drivers/cpufreq/cppc_cpufreq.c:481:12: error: ‘cppc_get_cpu_power’ defined but not used
[-Werror=unused-function]
   481 | static int cppc_get_cpu_power(struct device *cpu_dev,
       |            ^~~~~~~~~~~~~~~~~~

Move the Energy Model related functions into specific guards.
This allows to fix the warning and prevent doing extra work
when the Energy Model is not present.

Fixes: 740fcdc2 ("cpufreq: CPPC: Register EM based on efficiency class information")
Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

If CONFIG_ACPI_CPPC_CPUFREQ_FIE is not set, building fails:

drivers/cpufreq/cppc_cpufreq.c: In function ‘populate_efficiency_class’:
drivers/cpufreq/cppc_cpufreq.c:584:2: error: ‘cppc_cpufreq_driver’ undeclared (first use in this function); did you mean ‘cpufreq_driver’?
  cppc_cpufreq_driver.register_em = cppc_cpufreq_register_em;
  ^~~~~~~~~~~~~~~~~~~
  cpufreq_driver

Make declare of cppc_cpufreq_driver out of CONFIG_ACPI_CPPC_CPUFREQ_FIE
to fix this.

Fixes: 740fcdc2 ("cpufreq: CPPC: Register EM based on efficiency class information")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull dmaengine updates from Vinod Koul:
 "Nothing special, this includes a couple of new device support and new
  driver support and bunch of driver updates.

  New support:

   - Tegra gpcdma driver support

   - Qualcomm SM8350, Sm8450 and SC7280 device support

   - Renesas RZN1 dma and platform support

  Updates:

   - stm32 device pause/resume support and updates

   - DMA memset ops Documentation and usage clarification

   - deprecate '#dma-channels' & '#dma-requests' bindings

   - driver updates for stm32, ptdma idsx etc"

* tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits)
  dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled
  dmaengine: sun6i: Add support for the D1 variant
  dmaengine: sun6i: Add support for 34-bit physical addresses
  dmaengine: sun6i: Do not use virt_to_phys
  dt-bindings: dma: sun50i-a64: Add compatible for D1
  dmaengine: tegra: Remove unused switch case
  dmaengine: tegra: Fix uninitialized variable usage
  dmaengine: stm32-dma: add device_pause/device_resume support
  dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction
  dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done()
  dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg
  dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor
  dmaengine: qcom: gpi: Add support for sc7280
  dt-bindings: dma: pl330: Add power-domains
  dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it
  dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler()
  dmaengine: stm32-mdma: remove GISR1 register
  dmaengine: ti: deprecate '#dma-channels'
  dmaengine: mmp: deprecate '#dma-channels'
  dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests'
  ...

Pull tracing tool updates from Steven Rostedt:

 - Various clean ups and fixes to rtla (Real Time Linux Analysis)

* tag 'trace-tools-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  rtla: Remove procps-ng dependency
  rtla: Fix __set_sched_attr error message
  rtla: Minor grammar fix for rtla README
  rtla: Don't overwrite existing directory mode
  rtla: Avoid record NULL pointer dereference
  rtla/Makefile: Properly handle dependencies

Pull tracing updates from Steven Rostedt:
 "The majority of the changes are for fixes and clean ups.

  Notable changes:

   - Rework trace event triggers code to be easier to interact with.

   - Support for embedding bootconfig with the kernel (as suppose to
     having it embedded in initram). This is useful for embedded boards
     without initram disks.

   - Speed up boot by parallelizing the creation of tracefs files.

   - Allow absolute ring buffer timestamps handle timestamps that use
     more than 59 bits.

   - Added new tracing clock "TAI" (International Atomic Time)

   - Have weak functions show up in available_filter_function list as:
     __ftrace_invalid_address___<invalid-offset> instead of using the
     name of the function before it"

* tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (52 commits)
  ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function
  tracing: Fix comments for event_trigger_separate_filter()
  x86/traceponit: Fix comment about irq vector tracepoints
  x86,tracing: Remove unused headers
  ftrace: Clean up hash direct_functions on register failures
  tracing: Fix comments of create_filter()
  tracing: Disable kcov on trace_preemptirq.c
  tracing: Initialize integer variable to prevent garbage return value
  ftrace: Fix typo in comment
  ftrace: Remove return value of ftrace_arch_modify_*()
  tracing: Cleanup code by removing init "char *name"
  tracing: Change "char *" string form to "char []"
  tracing/timerlat: Do not wakeup the thread if the trace stops at the IRQ
  tracing/timerlat: Print stacktrace in the IRQ handler if needed
  tracing/timerlat: Notify IRQ new max latency only if stop tracing is set
  kprobes: Fix build errors with CONFIG_KRETPROBES=n
  tracing: Fix return value of trace_pid_write()
  tracing: Fix potential double free in create_var_ref()
  tracing: Use strim() to remove whitespace instead of doing it manually
  ftrace: Deal with error return code of the ftrace_process_locs() function
  ...

Merge tag 'perf-tools-for-v5.19-2022-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Add BPF based off-CPU profiling

 - Improvements for system wide recording, specially for Intel PT

 - Improve DWARF unwinding on arm64

 - Support Arm CoreSight trace data disassembly in 'perf script' python

 - Fix build with new libbpf version, related to supporting older
   versions of distro released libbpf packages

 - Fix event syntax error caused by ExtSel in the JSON events infra

 - Use stdio interface if slang is not supported in 'perf c2c'

 - Add 'perf test' checking for perf stat CSV output

 - Sync the msr-index.h copy with the kernel sources

* tag 'perf-tools-for-v5.19-2022-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (38 commits)
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf scripts python: Support Arm CoreSight trace data disassembly
  perf scripting python: Expose dso and map information
  perf jevents: Fix event syntax error caused by ExtSel
  perf tools arm64: Add support for VG register
  perf unwind arm64: Decouple Libunwind register names from Perf
  perf unwind: Use dynamic register set for DWARF unwind
  perf tools arm64: Copy perf_regs.h from the kernel
  perf unwind arm64: Use perf's copy of kernel headers
  perf c2c: Use stdio interface if slang is not supported
  perf test: Add a basic offcpu profiling test
  perf record: Add cgroup support for off-cpu profiling
  perf record: Handle argument change in sched_switch
  perf record: Implement basic filtering for off-cpu
  perf record: Enable off-cpu analysis with BPF
  perf report: Do not extend sample type of bpf-output event
  perf test: Add checking for perf stat CSV output.
  perf tools: Allow system-wide events to keep their own threads
  perf tools: Allow system-wide events to keep their own CPUs
  libperf evsel: Add comments for booleans
  ...