Merge tag 'iio-for-5.1b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new device support, features and cleanup for IIO in the 5.1 cycle.

There are a few late breaking fixes in here that weren't worth trying to
rush into 5.0 as they have been with us for quite a while.

New device support
* ad7476
  - add support for TI ADS786X parts that are compatible with this Analog
    Devices driver. Good to see some simple devices are so similar.
* Ingenic jz47xx SoC ADCs
  - new driver and bindings
* Plantower PMS7003 partical sensor
  - new driver and bindings including vendor prefix.
* TI DAC7612
  - new driver and bindings for this dual DAC.

New features
* ad7768-1
  - Sampling frequency control
* bmi160
  - Data ready trigger support, including open-drain dt binding.

Cleanup / minor fixes.
* Analog Device DACs
  - Fix some inconsistent licenses.  These are only ones where there were
    two different license marked in the same file, and hence were previously
    unclear.
* ads124s08
  - Spelling fix.
* adxl345
  - Parameter alignement tidy up.
* bmi160
  - SPDX
  - correct a note on the types of supported interrupts which was too strict.
  - use iio_pollfunc_store_time to grab an earlier timestamp.
  - use if (ret) instead of if (ret < 0) to be consistent whilst simplifying
    some handling where ret was effectively getting written to 0 even though
    it was always already 0.
* exynos_adc
  - Fix a null pointer dereference on unbind.
  - Fix number of channels on Exynos4x12 devices to be 4 rather than 8.
* lpc32xx-adc
  - Move DT bindings doc out of staging. Oops, I missed this one when
    moving the driver.
  - SPDX.
* npcm-adc
  - drop documentation of reset node as going to be done differently.
    It's a new driver this cycle so no need to support the previous
    binding going forwards.
* sps30
  - Fix an issue with a loop timeout test that meant it would never identify
    a timeout.
  - Mark deliberate switch fall throughs.

* tag 'iio-for-5.1b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits)
  iio: adc: exynos-adc: Use proper number of channels for Exynos4x12
  dt-binding: iio: remove rst node from NPCM ADC document
  dt-bindings: iio: chemical: pms7003: add device tree support
  dt-bindings: add Plantower to the vendor prefixes
  iio: chemical: add support for Plantower PMS7003 sensor
  iio:chemical:sps30 Supress some switch fallthrough warnings.
  iio:adc:lpc32xx use SPDX-License-Identifier
  dt-bindings: iio: adc: move lpc32xx-adc out of staging
  iio: adc: ads124s08: fix spelling mistake "converions" -> "conversions"
  iio: adc: exynos-adc: Fix NULL pointer exception on unbind
  iio: chemical: sps30: fix a loop timeout test
  iio:accel:adxl345: Change alignment to match paranthesis
  iio:dac:dac7612: device tree bindings
  iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612
  iio: adc: ad7476: Add support for TI ADS786X ADCs
  iio: adc: ad7768-1: Add support for setting the sampling frequency
  drivers: iio: dac: Fix wrong license for ADI drivers
  IIO: add Ingenic JZ47xx ADC driver.
  dt-bindings: iio/adc: Add bindings for Ingenic JZ47xx SoCs ADC.
  dt-bindings: iio/adc: Add docs for Ingenic JZ47xx SoCs ADC.
  ...

Exynos4212 and Exynos4412 have only four ADC channels so using
"samsung,exynos-adc-v1" compatible (for eight channels ADCv1) on them is
wrong.  Add a new compatible for Exynos4x12.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

unlikely has already included in IS_ERR(),
so just remove it.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

unlikely has already included in IS_ERR(),
so just remove redundant likely/unlikely
annotation.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove NPCM7xx rst node for preparing the NPCM ADC
document to describe ADC reset binding.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add device tree support for Plantower PMS7003 particulate matter sensor.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add Plantower to the vendor prefixes.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add support for Plantower PMS7003 particulate matter sensor.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Fixes warnings reported on linux-next but marking one path
and adding an explicit return in the other.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Brauchli <a.brauchli@elementarea.net>
Acked-by: Tomasz Duszynski <tduszyns@gmail.com>

Some of the things included in driver's TODO file have
been properly achieved. Update file accordly.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix some space required coding style.
Signed-off-by: Guilherme Tadashi Maeoka <gui.maeoka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename following parameters of function dot11d_update_country to fix
checkpatch warning: Avoid CamelCase and make the parameter names more
readable, understandable.
	pTaddr -> address
	CoutryIeLen -> country_len
	pCoutryIe -> country
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename following local variables of function dot11d_update_country to
fix checkpatch warning: Avoid CamelCase and make the variable names more
readable, understandable.
	NumTriples -> number_of_triples
	MaxChnlNum -> max_channel_number
	pTriple -> triple
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename function DOT11D_ScanComplete to dot11d_scan_complete to fix
checkpatch warning: Avoid CamelCase.
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename function Dot11d_UpdateCountryIe to dot11d_update_country to fix
checkpatch warning: Avoid CamelCase.
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename function Dot11d_Reset to dot11d_reset to fix checkpatch warning:
Avoid CamelCase.
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename function Dot11d_Channelmap to dot11d_channel_map to fix
checkpatch warning: Avoid CamelCase.
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull dmaengine fixes from Vinod Koul:
 - Fix in at_xdmac fr wrongful channel state
 - Fix for imx driver for wrong callback invocation
 - Fix to bcm driver for interrupt race & transaction abort.
 - Fix in dmatest to abort in mapping error

* tag 'dmaengine-fix-5.0-rc6' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: dmatest: Abort test in case of mapping error
  dmaengine: bcm2835: Fix abort of transactions
  dmaengine: bcm2835: Fix interrupt race on RT
  dmaengine: imx-dma: fix wrong callback invoke
  dmaengine: at_xdmac: Fix wrongfull report of a channel as in use

Pull x86 fixes from Ingo Molnar:
 "A handful of fixes:

   - Fix an MCE corner case bug/crash found via MCE injection testing

   - Fix 5-level paging boot crash

   - Fix MCE recovery cache invalidation bug

   - Fix regression on Xen guests caused by a recent PMD level mremap
     speedup optimization"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Make set_pmd_at() paravirt aware
  x86/mm/cpa: Fix set_mce_nospec()
  x86/boot/compressed/64: Do not corrupt EDX on EFER.LME=1 setting
  x86/MCE: Initialize mce.bank in the case of a fatal error in mce_no_way_out()

Pull irq fixes from Ingo Molnar:
 "irqchip driver fixes: most of them are race fixes for ARM GIC (General
  Interrupt Controller) variants, but also a fix for the ARM MMP
  (Marvell PXA168 et al) irqchip affecting OLPC keyboards"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix ITT_entry_size accessor
  irqchip/mmp: Only touch the PJ4 IRQ & FIQ bits on enable/disable
  irqchip/gic-v3-its: Gracefully fail on LPI exhaustion
  irqchip/gic-v3-its: Plug allocation race for devices sharing a DevID
  irqchip/gic-v4: Fix occasional VLPI drop

Pull perf fixes from Ingo Molnar:
 "A couple of kernel side fixes:

   - Fix the Intel uncore driver on certain hardware configurations

   - Fix a CPU hotplug related memory allocation bug

   - Remove a spurious WARN()

  ... plus also a handful of perf tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf script python: Add Python3 support to tests/attr.py
  perf trace: Support multiple "vfs_getname" probes
  perf symbols: Filter out hidden symbols from labels
  perf symbols: Add fallback definitions for GELF_ST_VISIBILITY()
  tools headers uapi: Sync linux/in.h copy from the kernel sources
  perf clang: Do not use 'return std::move(something)'
  perf mem/c2c: Fix perf_mem_events to support powerpc
  perf tests evsel-tp-sched: Fix bitwise operator
  perf/core: Don't WARN() for impossible ring-buffer sizes
  perf/x86/intel: Delay memory deallocation until x86_pmu_dead_cpu()
  perf/x86/intel/uncore: Add Node ID mask

Pull locking fixes from Ingo Molnar:
 "An rtmutex (PI-futex) deadlock scenario fix, plus a locking
  documentation fix"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Handle early deadlock return correctly
  futex: Fix barrier comment

set_pmd_at() calls native_set_pmd() unconditionally on x86. This was
fine as long as only huge page entries were written via set_pmd_at(),
as Xen pv guests don't support those.

Commit 2c91bd4a ("mm: speed up mremap by 20x on large regions")
introduced a usage of set_pmd_at() possible on pv guests, leading to
failures like:

BUG: unable to handle kernel paging request at ffff888023e26778
#PF error: [PROT] [WRITE]
RIP: e030:move_page_tables+0x7c1/0xae0
move_vma.isra.3+0xd1/0x2d0
__se_sys_mremap+0x3c6/0x5b0
 do_syscall_64+0x49/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Make set_pmd_at() paravirt aware by just letting it use set_pmd().

Fixes: 2c91bd4a ("mm: speed up mremap by 20x on large regions")
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Cc: boris.ostrovsky@oracle.com
Cc: sstabellini@kernel.org
Cc: hpa@zytor.com
Cc: bp@alien8.de
Cc: torvalds@linux-foundation.org
Link: https://lkml.kernel.org/r/20190210074056.11842-1-jgross@suse.com

Pull i2c fixes from Wolfram Sang:
 "One PM related driver bugfix and a MAINTAINERS update"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: Update the ocores i2c bus driver maintainer, etc
  i2c: omap: Use noirq system sleep pm ops to idle device for suspend

Pull MIPS fixes from Paul Burton:
 "A batch of MIPS fixes for 5.0, nothing too scary.

   - A workaround for a Loongson 3 CPU bug is the biggest change, but
     still fairly straightforward. It adds extra memory barriers (sync
     instructions) around atomics to avoid a CPU bug that can break
     atomicity.

   - Loongson64 also sees a fix for powering off some systems which
     would incorrectly reboot rather than waiting for the power down
     sequence to complete.

   - We have DT fixes for the Ingenic JZ4740 SoC & the JZ4780-based Ci20
     board, and a DT warning fix for the Nexsys4/MIPSfpga board.

   - The Cavium Octeon platform sees a further fix to the behaviour of
     the pcie_disable command line argument that was introduced in v3.3.

   - The VDSO, introduced in v4.4, sees build fixes for configurations
     of GCC that were built using the --with-fp-32= flag to specify a
     default 32-bit floating point ABI.

   - get_frame_info() sees a fix for configurations with
     CONFIG_KALLSYMS=n, for which it previously always returned an
     error.

   - If the MIPS Coherence Manager (CM) reports an error then we'll now
     clear that error correctly so that the GCR_ERROR_CAUSE register
     will be updated with information about any future errors"

* tag 'mips_fixes_5.0_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: cm: reprime error cause
  mips: loongson64: remove unreachable(), fix loongson_poweroff().
  MIPS: Remove function size check in get_frame_info()
  MIPS: Use lower case for addresses in nexys4ddr.dts
  MIPS: Loongson: Introduce and use loongson_llsc_mb()
  MIPS: VDSO: Include $(ccflags-vdso) in o32,n32 .lds builds
  MIPS: VDSO: Use same -m%-float cflag as the kernel proper
  MIPS: OCTEON: don't set octeon_dma_bar_type if PCI is disabled
  DTS: CI20: Fix bugs in ci20's device tree.
  MIPS: DTS: jz4740: Correct interrupt number of DMA core

Convert the driver to SPDX license description which allow removing
several lines in the file.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The drivers has been moved out since
0097e20e ("staging:iio:adc:lpc32xx Move out of staging.") in v4.10,
so let's align the binding documentation.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

There is a spelling mistake in several dev_err messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Fix NULL pointer exception on device unbind when device tree does not
contain "has-touchscreen" property.  In such case the input device is
not registered so it should not be unregistered.

    $ echo "12d10000.adc" > /sys/bus/platform/drivers/exynos-adc/unbind

    Unable to handle kernel NULL pointer dereference at virtual address 00000474
    ...
    (input_unregister_device) from [<c0772060>] (exynos_adc_remove+0x20/0x80)
    (exynos_adc_remove) from [<c0587d5c>] (platform_drv_remove+0x20/0x40)
    (platform_drv_remove) from [<c05860f0>] (device_release_driver_internal+0xdc/0x1ac)
    (device_release_driver_internal) from [<c0583ecc>] (unbind_store+0x60/0xd4)
    (unbind_store) from [<c031b89c>] (kernfs_fop_write+0x100/0x1e0)
    (kernfs_fop_write) from [<c029709c>] (__vfs_write+0x2c/0x17c)
    (__vfs_write) from [<c0297374>] (vfs_write+0xa4/0x184)
    (vfs_write) from [<c0297594>] (ksys_write+0x4c/0xac)
    (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)

Fixes: 2bb8ad9b ("iio: exynos-adc: add experimental touchscreen support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The "while (tries--) {" loop is a postop so it exits with "tries" set
to -1.

Fixes: 232e0f6d ("iio: chemical: add support for Sensirion SPS30 sensor")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Align broken line to match upper line parenthesis. Solves the
checkpatch.pl's message:

CHECK: Alignment should match open parenthesis
Signed-off-by: Luciana da Costa Marques <lucianadacostamarques@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Bindings for dac7612.

Cc: devicetree@vger.kernel.org
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

It is a driver for Texas Instruments Dual, 12-Bit Serial Input
Digital-to-Analog Converter.

Datasheet of this chip:
http://www.ti.com/lit/ds/sbas106/sbas106.pdfSigned-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add support for Texas Instruments ADS7866, ADS7867 and ADS7868
8/10/12 bit Single channel ADC.

Datasheet: http://www.ti.com/lit/ds/symlink/ads7868.pdfSigned-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The AD7768-1 core ADC receives a master clock signal (MCLK). The MCLK
frequency combined with the MCLK division and the digital filter
decimation rates, determines the sampling frequency. Along with
MCLK_DIV, the power mode is also configured according to datasheet
recommendations.

From user space, available sampling frequencies can be read. However,
it is not required for an exact value to be entered, since the driver
will look for the closest available match.

When the device configuration changes (for example, if the filter
decimation rate changes), a SYNC_IN pulse is required.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Analog Devices drivers are typically GPL v2 only. This patch fixes the
inconsistencies between the module license and SPDX.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add an IIO driver for the ADC hardware present on Ingenic JZ47xx SoCs.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph, fixing namespace locking when
   dealing with the effects log, and a rapid add/remove issue (Keith)

 - blktrace tweak, ensuring requests with -1 sectors are shown (Jan)

 - link power management quirk for a Smasung SSD (Hans)

 - m68k nfblock dynamic major number fix (Chengguang)

 - series fixing blk-iolatency inflight counter issue (Liu)

 - ensure that we clear ->private when setting up the aio kiocb (Mike)

 - __find_get_block_slow() rate limit print (Tetsuo)

* tag 'for-linus-20190209' of git://git.kernel.dk/linux-block:
  blk-mq: remove duplicated definition of blk_mq_freeze_queue
  Blk-iolatency: warn on negative inflight IO counter
  blk-iolatency: fix IO hang due to negative inflight counter
  blktrace: Show requests without sector
  fs: ratelimit __find_get_block_slow() failure message.
  m68k: set proper major_num when specifying module param major_num
  libata: Add NOLPM quirk for SAMSUNG MZ7TE512HMHP-000L1 SSD
  nvme-pci: fix rapid add remove sequence
  nvme: lock NS list changes while handling command effects
  aio: initialize kiocb private in case any filesystems expect it.