- 30 Sep, 2021 39 commits
-
-
Jernej Skrabec authored
HEVC frames may use scaling list feature. Add support for it. Signed-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Benjamin Gaignard authored
If the bitstream embedded scaling lists allow the driver to use them for decode the frames. The scaling lists are expected to be in raster scan order (i.e. not up right diagonal scan order) Allocate the memory needed to store lists. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Benjamin Gaignard authored
HEVC scaling lists are used for the scaling process for transform coefficients. V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED has to set when they are encoded in the bitstream. Signed-off-by:
-
Robert Foss authored
Expose the VFE version by returning the value read from the HW_VERSION register. Secondly, change the name of this function to conform with the CSID equivalent. Signed-off-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
Robert Foss authored
The device argument is not needed, since it is accessible through the vfe_device argument already. Signed-off-by:
-
Robert Foss authored
The HW Version can in no case represent an error, so change the print priority to 'dbg'. Signed-off-by:
-
Robert Foss authored
vfe_set_power() is invoked a few times, which causes a lot of VFE HW version prints. Secondly there is no real reason for calling hw_version_read() from this location specifically, since it does nothing more than print the VFE HW version. A better location for the hw_version_read() call would be somewhere which is only executed once per VFE unit. Signed-off-by:
-
Heiko Stuebner authored
The px30 uses a V12 isp block so add compatible and matchdata for it. Signed-off-by:
Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by:
-
Heiko Stuebner authored
Add the compatible for the px30-variant of the rkisp Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Heiko Stuebner authored
The rkisp1 evolved over soc generations and the rk3326/px30 introduced the so called v12 - probably meaning v1.2. Add the new register definitions. Signed-off-by:
-
Heiko Stuebner authored
The rkisp1 evolved over soc generations and the rk3326/px30 introduced the so called v12 - probably meaning v1.2. In a first step adapt the affected v10 parts to give them a matching suffix to enable us to add v12 variants later on. Signed-off-by:
-
Heiko Stuebner authored
The isp block evolved in subsequent socs, so some functions will behave differently on newer variants. Therefore make it possible to override the needed stats functions. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Heiko Stuebner authored
The isp block evolved in subsequent socs, so some functions will behave differently on newer variants. Therefore make it possible to override the needed params functions. Signed-off-by:
-
Heiko Stuebner authored
Depending on the per-soc implementation there can be one interrupt for isp, mipi and capture events or separate per-event interrupts. So simply check for the presence of a named "mi" interrupt to differentiate between the two cases. Signed-off-by:
-
Heiko Stuebner authored
Some variants have one irq signaling all of MI, MIPI and ISP events while some rkisp1 variants use separate irqs for each. Adapt the binding to handle both cases. Signed-off-by:
-
Heiko Stuebner authored
Having a clock name as "pclk_isp" suggests really hard a remnant from the vendor kernel. Right now no driver _and_ no devicetree actually uses this clock name so there is still time to fix that naming. Therefore drop the "_isp" suffix and only name it pclk. Signed-off-by:
-
Heiko Stuebner authored
The irq variable in struct rkisp1 is unused as it is only used to request the irq during probe, so remove it. Signed-off-by:
-
Stefan Riedmueller authored
Add missing required clocks and supply regulator properties for the sensor input clock and vdd, vdd_io and vaa supply regulators. Signed-off-by:
Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Stefan Riedmueller authored
Convert mt9p031 sensor bindings to yaml schema. Also update the MAINTAINERS entry. Although input-clock-frequency and pixel-clock-frequency have not been definded as endpoint propierties in the textual bindings, the sensor does parse them from the endpoint. Thus move these properties to the endpoint in the new yaml bindings. Signed-off-by:
-
Stefan Riedmueller authored
Make use of the BIT macro for setting individual bits. This improves readability and safety with respect to shifts. When on it also remove two zero value disable defines. Signed-off-by:
-
Dirk Bender authored
To prevent corrupted frames after starting and stopping the sensor its datasheet specifies a specific pause sequence to follow: Stopping: Set Pause_Restart Bit -> Set Restart Bit -> Set Chip_Enable Off Restarting: Set Chip_Enable On -> Clear Pause_Restart Bit The Restart Bit is cleared automatically and must not be cleared manually as this would cause undefined behavior. Signed-off-by:
Dirk Bender <d.bender@phytec.de> Signed-off-by:
-
Christian Hemp authored
Evaluate the desired pixel clock polarity from the device tree. Signed-off-by:
Christian Hemp <c.hemp@phytec.de> Signed-off-by:
-
Enrico Scholz authored
The real and requested clock can differ and because it is used to calculate PLL values, the real clock rate should be read. Signed-off-by:
Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by:
-
Niklas Söderlund authored
There are only one user left of __v4l2_async_nf_parse_fwnode_ep() since [1], v4l2_async_nf_parse_fwnode_endpoints(). The two functions can be merged. The merge of the two highlights a dead code block conditioned by the argument 'has_port' that always is false and can therefor be removed. 1. commit 0ae426eb ("media: v4l2-fwnode: Remove v4l2_async_notifier_parse_fwnode_endpoints_by_port()") [Sakari Ailus: Aligned some lines to opening parentheses.] Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
-
Niklas Söderlund authored
The fwnode is retrieved using fwnode_graph_get_endpoint_by_id() without the FWNODE_GRAPH_DEVICE_DISABLED flag set. So there is no need to explicitly check if the fwnode is available as it always will be when the check is performed, remove it. Signed-off-by:
-
Sakari Ailus authored
Rename V4L2 async notifier functions, replacing "notifier" with "nf" and removing "_subdev" at the end of the function names adding subdevs as you can only add subdevs to a notifier. Also wrap and otherwise clean up long lines. Signed-off-by:
-
Niklas Söderlund authored
Add support for the R-Car V3U (r8a779a0) to the driver. The V3U has the VIN modules connected to a ISP instead of directly to the R-Car CSI-2 receivers. The reason being that the ISP performs channel selection based on CSI-2 VC/DT pairs and routes the video data to different VIN modules. In other SoC versions this filtering is done by the VIN modules themself. While the media graph is very different from other SoCs the only difference in operating the VIN modules is that the VC/DT filtering should be skipped as that is performed by the ISP. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Niklas Söderlund authored
The CSI-2 link notifications are no longer the only option for the VIN group. Change the symbol prefix to rvin_csi2_ for all CSI-2 specific code and move the link notification code to the correct section not to mix it with the soon to be added R-Car ISP channel selector notification helpers. There is no functional change and apart from the symbol prefix change all functions are moved verbatim. Signed-off-by:
-
Niklas Söderlund authored
The media device operations structure will be different depending on what media graph layout is used. Instead of hard-coding the R-Car CSI-2 layout allow the operations to be passed as an argument. Signed-off-by:
-
Niklas Söderlund authored
New IP versions will have different media graphs and require a different link setup. Breakout the specific link setup to a callback that are associated with the group. Signed-off-by:
-
Niklas Söderlund authored
The R-Car VIN group notifier will be extend to support a new group of subdevices, the R-Car ISP channel selector in addition to the existing R-Car CSI-2 receiver subdevices. The existing DT parsing code can be reused if the port and max number of endpoints are provided as parameters instead of being hard-coded. While at it align the group notifier parser function names with the rest of the driver. Signed-off-by:
-
Niklas Söderlund authored
The VIN group notifier code is intertwined with the media graph layout code for R-Car CSI-2 subdevices, this makes it hard to extend the group to also support the R-Car ISP channel selector. Before breaking the two concepts apart and extending it move the group code to its final location. There is no functional change and all functions are moved verbatim. Signed-off-by:
-
Niklas Söderlund authored
The VIN group have always been connected to CSI-2 receivers and this have spilled over to the naming of the array storing the subdevice information. In preparation for connecting other types of subdevices rename the array to remotes. Signed-off-by:
-
Niklas Söderlund authored
In preparation for adding a new media graph layout move the code reuse of the parallel notifier setup from probe directly to the current media graph initialization function. This is needed as there will be no parallel interface in the new graph layout. Signed-off-by:
-
Niklas Söderlund authored
The cleanup code for the async notifiers can be refactored to own functions to reduce code duplication and improve readability. While at it rename the CSI-2 initialization function _csi2_ instead of _mc_ to match. Signed-off-by:
-
Niklas Söderlund authored
The error paths of rvin_mc_init() do not clean up properly, fix this. Signed-off-by:
-
Niklas Söderlund authored
The controls for the video device are created in different code paths depending on if the driver is using the media graph centric model (Gen3) or the device centric model (Gen2 and earlier). This have lead to code duplication that can be consolidated. Signed-off-by:
-
Niklas Söderlund authored
Add support for the R-Car V3U (r8a779a0) to the driver. The V3U have the CSI-2 modules connected to ISPs instead of directly to the R-Car VIN DMA engines. The ISP performs channel selection based on CSI-2 VC/DT pairs and routes the video data. This requires the R-Car CSI-2 media entity to modeled differently then on other SoCs as it on the V3U only have a single source pad connected to the ISP. Signed-off-by:
-
Niklas Söderlund authored
Add support for R-Car V3U. Signed-off-by:
-
- 26 Sep, 2021 1 commit
-
-
Linus Torvalds authored
-
