Remove these two functions since all their callers have been removed.
See also commit ea8c2d8f ("RDMA/core: Remove unused ib cache
functions").
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Make sure to use sizeof(...) instead of sizeof ... which is more
preferred.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This commit replaces all the unsigned definitions in favour of 'unsigned
int' which is preferred.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Use min_t() macro to avoid the casting when using min() macro, also fix
the type of "length" and "wc->byte_len" to be "unsigned int" and
"u32" which is the right type for each one of them.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

In cm_form_tid(), a two bit message sequence number is OR'ed into bit
31-30 of the lower TID value.

After commit f06d2653 ("IB/cm: Randomize starting comm ID"), the
local_id is XOR'ed with a 32-bit random value. Hence, bit 31-30 in the
lower TID now has an arbitrarily value and it makes no sense to OR in
the message sequence number.

Adding to that, the evolution in use of IDR routines in cm_alloc_id()
has always had the possibility of returning a value with bit 30 set.

In addition, said bits are never checked.

Hence, remove the encoding and the corresponding enum.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Now that ib_uobject has a ib_uverbs_file we don't need this extra one in
ib_ucq_object.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The only purpose for this structure was to hold the ib_uobject_file
pointer, but now that is part of the standard ib_uobject the structure
no longer makes any sense, so get rid of it.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Unnecessary clutter, to indirect through ucontext when the ufile would do.
Generally most of the code code should only be working with ufile, except
for a few places that touch the driver interface.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

The ucontext isn't needed any more, just pass the uverbs_file directly.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

The correct handle to refer to the idr/etc is ib_uverbs_file, revise all
the core APIs to use this instead. The user API are left as wrappers
that automatically convert a ucontext to a ufile for now.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

The IDR is part of the ib_ufile so all the machinery to lock it, handle
closing and disassociation rightly belongs to the ufile not the ucontext.

This changes the lifetime of that data to match the lifetime of the file
descriptor which is always strictly longer than the lifetime of the
ucontext.

We need the entire locking machinery to continue to exist after ucontext
destruction to allow us to return the destroy data after a device has been
disassociated.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

This consolidates a bunch of repeated code patterns into a helper.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

After all the rework is done it is now possible to include single flags in
the type macros. Any user of UVERBS_ATTR_STRUCT needs to zero check data
past the end of the known struct to be correct, so make this mandatory,
and get rid of MIN_SZ_OR_ZERO as a user flag.

This changes UVERBS_ATTR_TYPE to refer to a struct of exact size with not
possibility of extension, convert the few users of UVERBS_ATTR_TYPE and
MIN_SZ_OR_ZERO to use UVERBS_ATTR_STRUCT.

The one user of UVERBS_ATTR_STRUCT without MIN_SZ_OR_ZERO is just
confused. There is some padding at the end of that struct, but userspace
always provides it with the padding. The construction doesn't test if the
padding is zero, so it is pointless. Just use UVERBS_ATTR_TYPE.

Finally, rename min_sz_or_zero to zero_trailing to better reflect what it
does and hopefully avoid such mis-uses in the future.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

This newer macro allows specifying a lower bound on the accepted size, and
has an 'unlimited' upper bound. Due to this it never checks for trailing
zeroing so it doesn't make any sense to combine it with MIN_SZ_OR_ZERO, so
drop MIN_SZ_OR_ZERO when they are used together

There were a couple of places that open coded this pattern, switch them to
use the clearer UVERBS_ATTR_MIN_SIZE for clarity.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

This bit of boilerplate isn't really necessary, we can use bitfields
instead of a flags enum and the macros can then individually initialize
them through the __VA_ARGS__ like everything else.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Hide it inside the macros. The & is confusing and interferes with using
this as a generic DSL in later patches.

Since this also touches almost every line, also run the specs through
clang-format (with 'BinPackParameters: false') to make the maintenance
easier.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Instead of the large set of indirecting macros, define the few needed
macros to directly instantiate the struct uverbs_oject_tree_def and
associated objects list.

This is small amount of code duplication but the readability is far
better.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Instead of the large set of indirecting macros, define the few needed
macros to directly instantiate the struct uverbs_method_def and associated
attributes list.

This is small amount of code duplication but the readability is far
better.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Instead of using a complex cascade of macros, just directly provide the
initializer list each of the declarations is trying to create.

Now that the macros are simplified this also reworks the uverbs_attr_spec
to be friendly to older compilers by eliminating any unnamed
structures/unions inside, and removing the duplication of some fields. The
structure size remains at 16 bytes which was the original motivation for
some of this oddness.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Two methods are sharing the same attribute constant, but the attribute
definitions are not the same. This should not have been done, instead
split them into two attributes with the same number.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

The specs are required to operate the uverbs file, so they belong inside
the ib_uverbs_device, not inside the ib_device. The spec passed in the
ib_device is just a communication from the driver and should not be used
during runtime.

This also changes the lifetime of the spec memory to match the
ib_uverbs_device, however at this time the spec_root can still contain
driver pointers after disassociation, so it cannot be used if ib_dev is
NULL. This is preparation for another series.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

For dependencies, branch based on 'mellanox/mlx5-next' of
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git

Pull Dump and fill MKEY from Leon Romanovsky:

====================
MLX5 IB HCA offers the memory key, dump_fill_mkey to increase performance,
when used in a send or receive operations.

It is used to force local HCA operations to skip the PCI bus access, while
keeping track of the processed length in the ibv_sge handling.

In this three patch series, we expose various bits in our HW spec
file (mlx5_ifc.h), move unneeded for mlx5_core FW command and export such
memory key to user space thought our mlx5-abi header file.
====================

Botched auto-merge in mlx5_ib_alloc_ucontext() resolved by hand.

* branch 'mlx5-dump-fill-mkey':
  IB/mlx5: Expose dump and fill memory key
  net/mlx5: Add hardware definitions for dump_fill_mkey
  net/mlx5: Limit scope of dump_fill_mkey function
  net/mlx5: Rate limit errors in command interface
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

MLX5 IB HCA offers the memory key, dump_fill_mkey to boost
performance, when used in a send or receive operations.

It is used to force local HCA operations to skip the PCI bus access,
while keeping track of the processed length in the ibv_sge handling.

Meaning, instead of a PCI write access the HCA leaves the target
memory untouched, and skips filling that packet section. Similar
behavior is done upon send, the HCA skips data in memory relevant
to this key and saves PCI bus access.

This functionality saves PCI read/write operations.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

MLX5 IB HCA offers the memory key, dump_fill_mkey to boost
performance by forcing local HCA operations to skip the PCI bus
access,

This patch adds needed hardware definitions.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

mlx5_core_dump_fill_mkey() is going to be used in next
patch in IB and doesn't need to be visible to whole
mlx5_core. Move that command to mlx5_ib.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

The srq->swq[] is allocated in bnxt_qplib_create_srq().  It has
srq->hwq.max_elements elements so these tests should be > instead of >=
or we might go beyond the end of the array.

Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The sgid_tbl->tbl[] array is allocated in bnxt_qplib_alloc_sgid_tbl().
It has sgid_tbl->max elements.  So the > should be >= to prevent
accessing one element beyond the end of the array.

Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

"nents" is an unsigned int, so if ib_map_mr_sg() returns a negative
error code then it's type promoted to a high unsigned int which is
treated as success.

Fixes: a060b562 ("IB/core: generic RDMA READ/WRITE API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The 2.6.18... was a hell of a ride, and by now both me and
Roi are not dealing with iser any more. Max will replace us
as maintainer, good luck to you dear!
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

VMA lookup is supposed to be performed while mmap_sem is held.

Fixes: f26c7c83 ("i40iw: Add 2MB page support")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rdma_ah_find_type() can reach into ib_device->port_immutable with a
potentially out-of-bounds port number, so check that the port number is
valid first.

Fixes: 44c58487 ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Signed-off-by: Tarick Bedeir <tarick@google.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

On repeated module load/unload cycles, its possible for the pvrmda driver
to encounter this crash:

...
[  297.032448] RIP: 0010:[<ffffffff839e4620>]  [<ffffffff839e4620>] netdev_walk_all_upper_dev_rcu+0x50/0xb0
[  297.034078] RSP: 0018:ffff95087780bd08  EFLAGS: 00010286
[  297.034986] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff95087a0c0000
[  297.036196] RDX: ffff95087a0c0000 RSI: ffffffff839e44e0 RDI: ffff950835d0c000
[  297.037421] RBP: ffff95087780bd40 R08: ffff95087a0e0ea0 R09: abddacd03f8e0ea0
[  297.038636] R10: abddacd03f8e0ea0 R11: ffffef5901e9dbc0 R12: ffff95087a0c0000
[  297.039854] R13: ffffffff839e44e0 R14: ffff95087a0c0000 R15: ffff950835d0c828
[  297.041071] FS:  0000000000000000(0000) GS:ffff95087fc00000(0000) knlGS:0000000000000000
[  297.042443] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  297.043429] CR2: ffffffffffffffe8 CR3: 000000007a652000 CR4: 00000000003607f0
[  297.044674] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  297.045893] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  297.047109] Call Trace:
[  297.047545]  [<ffffffff839e4698>] netdev_has_upper_dev_all_rcu+0x18/0x20
[  297.048691]  [<ffffffffc05d31af>] is_eth_port_of_netdev+0x2f/0xa0 [ib_core]
[  297.049886]  [<ffffffffc05d3180>] ? is_eth_active_slave_of_bonding_rcu+0x70/0x70 [ib_core]
...

This occurs because vmw_pvrdma on probe stores a pointer to the netdev
that exists on function 0 of the same bus/device/slot (which represents
the vmxnet3 ethernet driver).  However, it never removes this pointer if
the vmxnet3 module is removed, leading to crashes resulting from use after
free dereferencing incidents like the one above.

The fix is pretty straightforward.  vmw_pvrdma should listen for
NETDEV_REGISTER and NETDEV_UNREGISTER events in its event listener code
block, and update the stored netdev pointer accordingly.  This solution
has been tested by myself and the reporter with successful results.  This
fix also allows the pvrdma driver to find its underlying ethernet device
in the event that vmxnet3 is loaded after pvrdma, which it was not able to
do before.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: ruquin@redhat.com
Tested-by: Adit Ranadive <aditr@vmware.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Currently the driver sets the mask of the gre_protocol to 0xffff
without consideration in the user request.

Fix it by copy the mask from the verbs spec.

Fixes: da2f22ae ("IB/mlx5: Add support for GRE flow specification")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The general interrupt handler is_rcv_avail_int() has two paths,
do_interrupt() (callback) and handle_user_interrupt().  The
do_interrupt() callback is for the threaded receive handling.
is_rcv_avail_int() cannot handle threaded IRQs.

If the do_interrupt() path is taken, and the IRQ returns
IRQ_WAKE_THREAD, the IRQ behavior will be indeterminate.

Remove incorrect call to do_interrupt() from is_rcv_avail_int(),
leaving the un-threaded (handle_user_interrupt()) path.

Fixes: f4f30031 ("staging/rdma/hfi1: Thread the receive interrupt.")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The in_use_ctxts bitmask is for user receive contexts only.  Setting it for
any other type of receive context is incorrect.

Move initial set of in_use_ctxts bits from the general context init to the
user context specific init. Having this bit set can allow contexts to be
incorrectly identified by some IRQ handlers. This will allow
handle_user_interrupt() will now filter user contexts correctly.

Clean up redundant is_rcv_urgent_int() user context check.

A follow on patch will clean up an incorrect code path in the
is_rcv_avail_int().

Fixes: 8737ce95 ("IB/hfi1: Fix an assign/ordering issue with shared context IDs")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

BUG: KASAN: use-after-free in srpt_set_enabled+0x1a9/0x1e0 [ib_srpt]
Read of size 4 at addr ffff8801269d23f8 by task check/29726

CPU: 4 PID: 29726 Comm: check Not tainted 4.18.0-rc2-dbg+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0xa4/0xf5
 print_address_description+0x6f/0x270
 kasan_report+0x241/0x360
 __asan_load4+0x78/0x80
 srpt_set_enabled+0x1a9/0x1e0 [ib_srpt]
 srpt_tpg_enable_store+0xb8/0x120 [ib_srpt]
 configfs_write_file+0x14e/0x1d0 [configfs]
 __vfs_write+0xd2/0x3b0
 vfs_write+0x101/0x270
 ksys_write+0xab/0x120
 __x64_sys_write+0x43/0x50
 do_syscall_64+0x77/0x230
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f235cfe6154

Fixes: aaf45bd8 ("IB/srpt: Detect session shutdown reliably")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Avoid that KASAN reports the following:

BUG: KASAN: use-after-free in srpt_close_ch+0x4f/0x1b0 [ib_srpt]
Read of size 4 at addr ffff880151180cb8 by task check/4681

CPU: 15 PID: 4681 Comm: check Not tainted 4.18.0-rc2-dbg+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0xa4/0xf5
 print_address_description+0x6f/0x270
 kasan_report+0x241/0x360
 __asan_load4+0x78/0x80
 srpt_close_ch+0x4f/0x1b0 [ib_srpt]
 srpt_set_enabled+0xf7/0x1e0 [ib_srpt]
 srpt_tpg_enable_store+0xb8/0x120 [ib_srpt]
 configfs_write_file+0x14e/0x1d0 [configfs]
 __vfs_write+0xd2/0x3b0
 vfs_write+0x101/0x270
 ksys_write+0xab/0x120
 __x64_sys_write+0x43/0x50
 do_syscall_64+0x77/0x230
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: aaf45bd8 ("IB/srpt: Detect session shutdown reliably")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Avoid that the compiler complains about set-but-not-used variables when
building with W=1. This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Remove the driver version and release date information because such
information is not relevant for an upstream driver. See also commit
e1267b01 ("RDMA: Remove useless MODULE_VERSION").
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB_MULTICAST_LID_BASE is defined as follows:

  #define IB_MULTICAST_LID_BASE   cpu_to_be16(0xC000)

Hence use be16_to_cpu() to convert it to CPU endianness. Compile-tested
only.

Fixes: af808ece ("IB/SA: Check dlid before SA agent queries for ClassPortInfo")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>