Pull x86/asmlinkage changes from Ingo Molnar:
 "As a preparation for Andi Kleen's LTO patchset (link time
  optimizations using GCC's -flto which build time optimization has
  steadily increased in quality over the past few years and might
  eventually be usable for the kernel too) this tree includes a handful
  of preparatory patches that make function calling convention
  annotations consistent again:

   - Mark every function without arguments (or 64bit only) that is used
     by assembly code with asmlinkage()

   - Mark every function with parameters or variables that is used by
     assembly code as __visible.

  For the vanilla kernel this has documentation, consistency and
  debuggability advantages, for the time being"

* 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asmlinkage: Fix warning in xen asmlinkage change
  x86, asmlinkage, vdso: Mark vdso variables __visible
  x86, asmlinkage, power: Make various symbols used by the suspend asm code visible
  x86, asmlinkage: Make dump_stack visible
  x86, asmlinkage: Make 64bit checksum functions visible
  x86, asmlinkage, paravirt: Add __visible/asmlinkage to xen paravirt ops
  x86, asmlinkage, apm: Make APM data structure used from assembler visible
  x86, asmlinkage: Make syscall tables visible
  x86, asmlinkage: Make several variables used from assembler/linker script visible
  x86, asmlinkage: Make kprobes code visible and fix assembler code
  x86, asmlinkage: Make various syscalls asmlinkage
  x86, asmlinkage: Make 32bit/64bit __switch_to visible
  x86, asmlinkage: Make _*_start_kernel visible
  x86, asmlinkage: Make all interrupt handlers asmlinkage / __visible
  x86, asmlinkage: Change dotraplinkage into __visible on 32bit
  x86: Fix sys_call_table type in asm/syscall.h

Pull x86/asm changes from Ingo Molnar:
 "Main changes:

   - Apply low level mutex optimization on x86-64, by Wedson Almeida
     Filho.

   - Change bitops to be naturally 'long', by H Peter Anvin.

   - Add TSX-NI opcodes support to the x86 (instrumentation) decoder, by
     Masami Hiramatsu.

   - Add clang compatibility adjustments/workarounds, by Jan-Simon
     Möller"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, doc: Update uaccess.h comment to reflect clang changes
  x86, asm: Fix a compilation issue with clang
  x86, asm: Extend definitions of _ASM_* with a raw format
  x86, insn: Add new opcodes as of June, 2013
  x86/ia32/asm: Remove unused argument in macro
  x86, bitops: Change bitops to be native operand size
  x86: Use asm-goto to implement mutex fast path on x86-64

Pull x86/apic changes from Ingo Molnar:
 "Smaller fixes"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioapic: Check attr against the previous setting when programmed more than once
  x86/ioapic/kcrash: Prevent crash_kexec() from deadlocking on ioapic_lock
  x86/acpi: Fix incorrect sanity check in acpi_register_lapic()

Pull timer changes from Ingo Molnar:
 "Various clocksource driver updates: extend the core with memory mapped
  hardware (mmio) support and add new (ARM) Moxart SoC and sun4i
  hardware support"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  clocksource: arch_timer: Add support for memory mapped timers
  clocksource: arch_timer: Push the read/write wrappers deeper
  Documentation: Add memory mapped ARM architected timer binding
  clocksource: arch_timer: Pass clock event to set_mode callback
  clocksource: arch_timer: Make register accessors less error-prone
  ARM: clocksource: moxart: documentation: Update device tree bindings document
  ARM: clocksource: moxart: Add bitops.h include
  ARM: clocksource: moxart: documentation: Fix device tree bindings document
  ARM: clocksource: Add support for MOXA ART SoCs
  clocksource: cadence_ttc: Reuse clocksource as sched_clock
  clocksource: cadence_ttc: Remove unused header
  clocksource: sun4i: Fix bug when switching from periodic to oneshot modes
  clocksource: sun4i: Cleanup parent clock setup
  clocksource: sun4i: Remove TIMER_SCAL variable
  clocksource: sun4i: Factor out some timer code
  clocksource: sun4i: Fix the next event code
  clocksource: sun4i: Don't forget to enable the clock we use
  clocksource: sun4i: Add clocksource and sched clock drivers
  clocksource: sun4i: rename AUTORELOAD define to RELOAD
  clocksource: sun4i: Wrap macros arguments in parenthesis
  ...

Pull scheduler changes from Ingo Molnar:
 "Various optimizations, cleanups and smaller fixes - no major changes
  in scheduler behavior"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix the sd_parent_degenerate() code
  sched/fair: Rework and comment the group_imb code
  sched/fair: Optimize find_busiest_queue()
  sched/fair: Make group power more consistent
  sched/fair: Remove duplicate load_per_task computations
  sched/fair: Shrink sg_lb_stats and play memset games
  sched: Clean-up struct sd_lb_stat
  sched: Factor out code to should_we_balance()
  sched: Remove one division operation in find_busiest_queue()
  sched/cputime: Use this_cpu_add() in task_group_account_field()
  cpumask: Fix cpumask leak in partition_sched_domains()
  sched/x86: Optimize switch_mm() for multi-threaded workloads
  generic-ipi: Kill unnecessary variable - csd_flags
  numa: Mark __node_set() as __always_inline
  sched/fair: Cleanup: remove duplicate variable declaration
  sched/__wake_up_sync_key(): Fix nr_exclusive tasks which lead to WF_SYNC clearing

Merge branches 'perf-urgent-for-linus' and 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf changes from Ingo Molnar:
 "As a first remark I'd like to point out that the obsolete '-f'
  (--force) option, which has not done anything for several releases,
  has been removed from 'perf record' and related utilities.  Everyone
  please update muscle memory accordingly! :-)

  Main changes on the perf kernel side:

   - Performance optimizations:
        . for trace events, by Steve Rostedt.
        . for time values, by Peter Zijlstra

   - New hardware support:
        . for Intel Silvermont (22nm Atom) CPUs, by Zheng Yan
        . for Intel SNB-EP uncore PMUs, by Zheng Yan

   - Enhanced hardware support:
        . for Intel uncore PMUs: add filter support for QPI boxes, by Zheng Yan

   - Core perf events code enhancements and fixes:
        . for full-nohz feature handling, by Frederic Weisbecker
        . for group events, by Jiri Olsa
        . for call chains, by Frederic Weisbecker
        . for event stream parsing, by Adrian Hunter

   - New ABI details:
        . Add attr->mmap2 attribute, by Stephane Eranian
        . Add PERF_EVENT_IOC_ID ioctl to return event ID, by Jiri Olsa
        . Export u64 time_zero on the mmap header page to allow TSC
          calculation, by Adrian Hunter
        . Add dummy software event, by Adrian Hunter.
        . Add a new PERF_SAMPLE_IDENTIFIER to make samples always
          parseable, by Adrian Hunter.
        . Make Power7 events available via sysfs, by Runzhen Wang.

   - Code cleanups and refactorings:
        . for nohz-full, by Frederic Weisbecker
        . for group events, by Jiri Olsa

   - Documentation updates:
        . for perf_event_type, by Peter Zijlstra

  Main changes on the perf tooling side (some of these tooling changes
  utilize the above kernel side changes):

   - Lots of 'perf trace' enhancements:

        . Make 'perf trace' command line arguments consistent with
          'perf record', by David Ahern.

        . Allow specifying syscalls a la strace, by Arnaldo Carvalho de Melo.

        . Add --verbose and -o/--output options, by Arnaldo Carvalho de Melo.

        . Support ! in -e expressions, to filter a list of syscalls,
          by Arnaldo Carvalho de Melo.

        . Arg formatting improvements to allow masking arguments in
          syscalls such as futex and open, where the some arguments are
          ignored and thus should not be printed depending on other args,
          by Arnaldo Carvalho de Melo.

        . Beautify futex open, openat, open_by_handle_at, lseek and futex
          syscalls, by Arnaldo Carvalho de Melo.

        . Add option to analyze events in a file versus live, so that
          one can do:

           [root@zoo ~]# perf record -a -e raw_syscalls:* sleep 1
           [ perf record: Woken up 0 times to write data ]
           [ perf record: Captured and wrote 25.150 MB perf.data (~1098836 samples) ]
           [root@zoo ~]# perf trace -i perf.data -e futex --duration 1
              17.799 ( 1.020 ms): 7127 futex(uaddr: 0x7fff3f6c6674, op: 393, val: 1, utime: 0x7fff3f6c6470, ua
             113.344 (95.429 ms): 7127 futex(uaddr: 0x7fff3f6c6674, op: 393, val: 1, utime: 0x7fff3f6c6470, uaddr2: 0x7fff3f6c6648, val3: 4294967
             133.778 ( 1.042 ms): 18004 futex(uaddr: 0x7fff3f6c6674, op: 393, val: 1, utime: 0x7fff3f6c6470, uaddr2: 0x7fff3f6c6648, val3: 429496
           [root@zoo ~]#

          By David Ahern.

        . Honor target pid / tid options when analyzing a file, by David Ahern.

        . Introduce better formatting of syscall arguments, including so
          far beautifiers for mmap, madvise, syscall return values,
          by Arnaldo Carvalho de Melo.

        . Handle HUGEPAGE defines in the mmap beautifier, by David Ahern.

   - 'perf report/top' enhancements:

        . Do annotation using /proc/kcore and /proc/kallsyms when
          available, removing the forced need for a vmlinux file kernel
          assembly annotation. This also improves this use case because
          vmlinux has just the initial kernel image, not what is actually
          in use after various code patchings by things like alternatives.
          By Adrian Hunter.

        . Add --ignore-callees=<regex> option to collapse undesired parts
          of call graphs, by Greg Price.

        . Simplify symbol filtering by doing it at machine class level,
          by Adrian Hunter.

        . Add support for callchains in the gtk UI, by Namhyung Kim.

        . Add --objdump option to 'perf top', by Sukadev Bhattiprolu.

   - 'perf kvm' enhancements:

        . Add option to print only events that exceed a specified time
          duration, by David Ahern.

        . Improve stack trace printing, by David Ahern.

        . Update documentation of the live command, by David Ahern

        . Add perf kvm stat live mode that combines aspects of 'perf kvm
          stat' record and report, by David Ahern.

        . Add option to analyze specific VM in perf kvm stat report, by
          David Ahern.

        . Do not require /lib/modules/* on a guest, by Jason Wessel.

   - 'perf script' enhancements:

        . Fix symbol offset computation for some dsos, by David Ahern.

        . Fix named threads support, by David Ahern.

        . Don't install scripting files files when perl/python support
          is disabled, by Arnaldo Carvalho de Melo.

   - 'perf test' enhancements:

        . Add various improvements and fixes to the "vmlinux matches
          kallsyms" 'perf test' entry, related to the /proc/kcore
          annotation feature. By Adrian Hunter.

        . Add sample parsing test, by Adrian Hunter.

        . Add test for reading object code, by Adrian Hunter.

        . Add attr record group sampling test, by Jiri Olsa.

        . Misc testing infrastructure improvements and other details,
          by Jiri Olsa.

   - 'perf list' enhancements:

        . Skip unsupported hardware events, by Namhyung Kim.

        . List pmu events, by Andi Kleen.

   - 'perf diff' enhancements:

        . Add support for more than two files comparison, by Jiri Olsa.

   - 'perf sched' enhancements:

        . Various improvements, including removing reliance on some
          scheduler tracepoints that provide the same information as the
          PERF_RECORD_{FORK,EXIT} events. By David Ahern.

        . Remove odd build stall by moving a large struct initialization
          from a local variable to a global one, by Namhyung Kim.

   - 'perf stat' enhancements:

        . Add --initial-delay option to skip measuring for a defined
          startup phase, by Andi Kleen.

   - Generic perf tooling infrastructure/plumbing changes:

        . Tidy up sample parsing validation, by Adrian Hunter.

        . Fix up jobserver setup in libtraceevent Makefile.
          by Arnaldo Carvalho de Melo.

        . Debug improvements, by Adrian Hunter.

        . Fix correlation of samples coming after PERF_RECORD_EXIT event,
          by David Ahern.

        . Improve robustness of the topology parsing code,
          by Stephane Eranian.

        . Add group leader sampling, that allows just one event in a group
          to sample while the other events have just its values read,
          by Jiri Olsa.

        . Add support for a new modifier "D", which requests that the
          event, or group of events, be pinned to the PMU.
          By Michael Ellerman.

        . Support callchain sorting based on addresses, by Andi Kleen

        . Prep work for multi perf data file storage, by Jiri Olsa.

        . libtraceevent cleanups, by Namhyung Kim.

  And lots and lots of other fixes and code reorganizations that did not
  make it into the list, see the shortlog, diffstat and the Git log for
  details!"

[ Also merge a leftover from the 3.11 cycle ]

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Prevent race in unthrottling code

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (237 commits)
  perf trace: Tell arg formatters the arg index
  perf trace: Add beautifier for open's flags arg
  perf trace: Add beautifier for lseek's whence arg
  perf tools: Fix symbol offset computation for some dsos
  perf list: Skip unsupported events
  perf tests: Add 'keep tracking' test
  perf tools: Add support for PERF_COUNT_SW_DUMMY
  perf: Add a dummy software event to keep tracking
  perf trace: Add beautifier for futex 'operation' parm
  perf trace: Allow syscall arg formatters to mask args
  perf: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node()
  perf: Export struct perf_branch_entry to userspace
  perf: Add attr->mmap2 attribute to an event
  perf/x86: Add Silvermont (22nm Atom) support
  perf/x86: use INTEL_UEVENT_EXTRA_REG to define MSR_OFFCORE_RSP_X
  perf trace: Handle missing HUGEPAGE defines
  perf trace: Honor target pid / tid options when analyzing a file
  perf trace: Add option to analyze events in a file versus live
  perf evlist: Add tracepoint lookup by name
  perf tests: Add a sample parsing test
  ...

Pull core/locking changes from Ingo Molnar:
 "Main changes:

   - another mutex optimization, from Davidlohr Bueso

   - improved lglock lockdep tracking, from Michel Lespinasse

   - [ assorted smaller updates, improvements, cleanups. ]"

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  generic-ipi/locking: Fix misleading smp_call_function_any() description
  hung_task debugging: Print more info when reporting the problem
  mutex: Avoid label warning when !CONFIG_MUTEX_SPIN_ON_OWNER
  mutex: Do not unnecessarily deal with waiters
  mutex: Fix/document access-once assumption in mutex_can_spin_on_owner()
  lglock: Update lockdep annotations to report recursive local locks
  lockdep: Introduce lock_acquire_exclusive()/shared() helper macros

Pull RCU updates from Ingo Molnar:
 "Main RCU changes this cycle were:

   - Full-system idle detection.  This is for use by Frederic
     Weisbecker's adaptive-ticks mechanism.  Its purpose is to allow the
     timekeeping CPU to shut off its tick when all other CPUs are idle.

   - Miscellaneous fixes.

   - Improved rcutorture test coverage.

   - Updated RCU documentation"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  nohz_full: Force RCU's grace-period kthreads onto timekeeping CPU
  nohz_full: Add full-system-idle state machine
  jiffies: Avoid undefined behavior from signed overflow
  rcu: Simplify _rcu_barrier() processing
  rcu: Make rcutorture emit online failures if verbose
  rcu: Remove unused variable from rcu_torture_writer()
  rcu: Sort rcutorture module parameters
  rcu: Increase rcutorture test coverage
  rcu: Add duplicate-callback tests to rcutorture
  doc: Fix memory-barrier control-dependency example
  rcu: Update RTFP documentation
  nohz_full: Add full-system-idle arguments to API
  nohz_full: Add full-system idle states and variables
  nohz_full: Add per-CPU idle-state tracking
  nohz_full: Add rcu_dyntick data for scalable detection of all-idle state
  nohz_full: Add Kconfig parameter for scalable detection of all-idle state
  nohz_full: Add testing information to documentation
  rcu: Eliminate unused APIs intended for adaptive ticks
  rcu: Select IRQ_WORK from TREE_PREEMPT_RCU
  rculist: list_first_or_null_rcu() should use list_entry_rcu()
  ...

Pull pwm changes from Thierry Reding:
 "A set of patches makes the device tree documentation for the various
  PWM drivers more consistent.  Device tree support is added to the
  Renesas TPU driver.  The sysfs interface now makes use of dev_groups.
  Other than that there is a healthy assortment of fixes and
  enhancements for minor issues that have shown up"

* tag 'for-3.12-rc1' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: pxa: Use module_platform_driver
  pwm: tiehrpwm: add missing __iomem annotation
  pwm: tiecap: add CONFIG_PM_SLEEP to ecap_pwm_{save,restore}_context()
  pwm: simplify use of devm_ioremap_resource
  pwm: renesas-tpu: Add DT support
  ARM: dts: Use the PWM polarity flags
  pwm: Update DT bindings to reference pwm.txt for cells documentation
  pwm: Use the DT macro directly when parsing PWM DT flags
  pwm: Add PWM polarity flag macro for DT
  pwm: mxs: Check the return value from stmp_reset_block()
  pwm: convert class code to use dev_groups

Pull pstore changes from Tony Luck:
 "A big part of this is the addition of compression to the generic
  pstore layer so that all backends can use the pitiful amounts of
  storage they control more effectively.  Three other small
  fixes/cleanups too.

* tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  pstore/ram: (really) fix undefined usage of rounddown_pow_of_two
  pstore/ram: Read and write to the 'compressed' flag of pstore
  efi-pstore: Read and write to the 'compressed' flag of pstore
  erst: Read and write to the 'compressed' flag of pstore
  powerpc/pseries: Read and write to the 'compressed' flag of pstore
  pstore: Add file extension to pstore file if compressed
  pstore: Add decompression support to pstore
  pstore: Introduce new argument 'compressed' in the read callback
  pstore: Add compression support to pstore
  pstore/Kconfig: Select ZLIB_DEFLATE and ZLIB_INFLATE when PSTORE is selected
  pstore: Add new argument 'compressed' in pstore write callback
  powerpc/pseries: Remove (de)compression in nvram with pstore enabled
  pstore: d_alloc_name() doesn't return an ERR_PTR
  acpi/apei/erst: Add missing iounmap() on error in erst_exec_move_data()

Pull cgroup updates from Tejun Heo:
 "A lot of activities on the cgroup front.  Most changes aren't visible
  to userland at all at this point and are laying foundation for the
  planned unified hierarchy.

   - The biggest change is decoupling the lifetime management of css
     (cgroup_subsys_state) from that of cgroup's.  Because controllers
     (cpu, memory, block and so on) will need to be dynamically enabled
     and disabled, css which is the association point between a cgroup
     and a controller may come and go dynamically across the lifetime of
     a cgroup.  Till now, css's were created when the associated cgroup
     was created and stayed till the cgroup got destroyed.

     Assumptions around this tight coupling permeated through cgroup
     core and controllers.  These assumptions are gradually removed,
     which consists bulk of patches, and css destruction path is
     completely decoupled from cgroup destruction path.  Note that
     decoupling of creation path is relatively easy on top of these
     changes and the patchset is pending for the next window.

   - cgroup has its own event mechanism cgroup.event_control, which is
     only used by memcg.  It is overly complex trying to achieve high
     flexibility whose benefits seem dubious at best.  Going forward,
     new events will simply generate file modified event and the
     existing mechanism is being made specific to memcg.  This pull
     request contains prepatory patches for such change.

   - Various fixes and cleanups"

Fixed up conflict in kernel/cgroup.c as per Tejun.

* 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (69 commits)
  cgroup: fix cgroup_css() invocation in css_from_id()
  cgroup: make cgroup_write_event_control() use css_from_dir() instead of __d_cgrp()
  cgroup: make cgroup_event hold onto cgroup_subsys_state instead of cgroup
  cgroup: implement CFTYPE_NO_PREFIX
  cgroup: make cgroup_css() take cgroup_subsys * instead and allow NULL subsys
  cgroup: rename cgroup_css_from_dir() to css_from_dir() and update its syntax
  cgroup: fix cgroup_write_event_control()
  cgroup: fix subsystem file accesses on the root cgroup
  cgroup: change cgroup_from_id() to css_from_id()
  cgroup: use css_get() in cgroup_create() to check CSS_ROOT
  cpuset: remove an unncessary forward declaration
  cgroup: RCU protect each cgroup_subsys_state release
  cgroup: move subsys file removal to kill_css()
  cgroup: factor out kill_css()
  cgroup: decouple cgroup_subsys_state destruction from cgroup destruction
  cgroup: replace cgroup->css_kill_cnt with ->nr_css
  cgroup: bounce cgroup_subsys_state ref kill confirmation to a work item
  cgroup: move cgroup->subsys[] assignment to online_css()
  cgroup: reorganize css init / exit paths
  cgroup: add __rcu modifier to cgroup->subsys[]
  ...

Pull libata changes from Tejun Heo:
 "Two interesting changes.

   - libata acpi handling has been restructured so that the association
     between ata devices and ACPI handles are less convoluted.  This
     change shouldn't change visible behavior.

   - Queued TRIM support, which enables sending TRIM to the device
     without draining in-flight RW commands, is added.  Currently only
     enabled for ahci (and likely to stay that way for the foreseeable
     future).

  Other changes are driver-specific updates / fixes"

* 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: bugfix: Remove __le32 in ata_tf_to_fis()
  libata: acpi: Remove ata_dev_acpi_handle stub in libata.h
  libata: Add support for queued DSM TRIM
  libata: Add support for SEND/RECEIVE FPDMA QUEUED
  libata: Add H2D FIS "auxiliary" port flag
  libata: Populate host-to-device FIS "auxiliary" field
  ata: acpi: rework the ata acpi bind support
  sata, highbank: send extra clock cycles in SGPIO patterns
  sata, highbank: set tx_atten override bits
  devicetree: create a separate binding description for sata_highbank
  drivers/ata/sata_rcar.c: simplify use of devm_ioremap_resource
  sata highbank: enable 64-bit DMA mask when using LPAE
  ata: pata_samsung_cf: add missing __iomem annotation
  ata: pata_arasan: Staticize local symbols
  sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs
  ata: use dev_get_platdata()
  sata_mv: Remove unneeded forward declaration
  libata: acpi: remove dead code for ata_acpi_(un)bind
  libata: move 'struct ata_taskfile' and friends from ata.h to libata.h

Pull workqueue updates from Tejun Heo:
 "Nothing interesting.  All are doc / comment updates"

* 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Correct/Drop references to gcwq in Documentation
  workqueue: Fix manage_workers() RETURNS description
  workqueue: Comment correction in file header
  workqueue: mark WQ_NON_REENTRANT deprecated

Pull single percpu update from Tejun Heo:
 "Just a single patch to update type verification macro for percpu
  accessors.

  Christoph is trying to replace __get_cpu_var() with this_cpu accessors
  which needs this update.  There are still some issues to be resolved
  but eventually the conversion patches are likely to be routed through
  different trees, so I think it'd be convenient to merge this commit
  early"

* 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: Make __verify_pcu_ptr handle per cpu pointers to arrays

Pull PCI changes from Bjorn Helgaas:

  PCI device hotplug:
    - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman)
    - Assign resources on per-host bridge basis (Yinghai Lu)

  MPS (Max Payload Size):
    - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang)
    - Add warnings about unsafe MPS settings (Yijing Wang)
    - Simplify interface and messages (Bjorn Helgaas)

  SR-IOV:
    - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann)
    - Update NumVFs register when disabling SR-IOV (Yijing Wang)

  Virtualization:
    - Add bus and slot reset support (Alex Williamson)
    - Fix ACS (Access Control Services) issues (Alex Williamson)

  Miscellaneous:
    - Simplify PCIe Capability accessors (Bjorn Helgaas)
    - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott)
    - Disable decoding during BAR sizing only when necessary (Zoltan Kiss)
    - Delay enabling bridges until they're needed (Yinghai Lu)
    - Split Designware support into Synopsys and Exynos parts (Jingoo Han)
    - Convert class code to use dev_groups (Greg Kroah-Hartman)
    - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon)
    - Fix bridge I/O window alignment (Bjorn Helgaas)
    - Add pci_wait_for_pending_transaction() (Casey Leedom)
    - Use devm_ioremap_resource() in Marvell driver (Tushar Behera)

* tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
  PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available
  PCI: exynos: Add I/O access wrappers
  PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
  PCI: Remove pcie_cap_has_devctl()
  PCI: Support PCIe Capability Slot registers only for ports with slots
  PCI: Remove PCIe Capability version checks
  PCI: Allow PCIe Capability link-related register access for switches
  PCI: Add offsets of PCIe capability registers
  PCI: Tidy bitmasks and spacing of PCIe capability definitions
  PCI: Remove obsolete comment reference to pci_pcie_cap2()
  PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment
  PCI: Rename PCIe capability definitions to follow convention
  PCI: Warn if unsafe MPS settings detected
  PCI: Fix MPS peer-to-peer DMA comment syntax
  PCI: Disable decoding for BAR sizing only when it was actually enabled
  PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n
  PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality
  PCI: Don't restrict MPS for slots below Root Ports
  PCI: Simplify MPS test for Downstream Port
  PCI: Remove unnecessary check for pcie_get_mps() failure
  ...

Pull ACPI and power management updates from Rafael Wysocki:

 1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction
    of Intel Thunderbolt support on systems that use ACPI for signalling
    Thunderbolt hotplug events.  This also should make ACPIPHP work in
    some cases in which it was known to have problems.  From
    Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov.

 2) ACPI core code cleanups and dock station support cleanups from
    Jiang Liu and Rafael J Wysocki.

 3) Fixes for locking problems related to ACPI device hotplug from
    Rafael J Wysocki.

 4) ACPICA update to version 20130725 includig fixes, cleanups, support
    for more than 256 GPEs per GPE block and a change to make the ACPI
    PM Timer optional (we've seen systems without the PM Timer in the
    field already).  One of the fixes, related to the DeRefOf operator,
    is necessary to prevent some Windows 8 oriented AML from causing
    problems to happen.  From Bob Moore, Lv Zheng, and Jung-uk Kim.

 5) Removal of the old and long deprecated /proc/acpi/event interface
    and related driver changes from Thomas Renninger.

 6) ACPI and Xen changes to make the reduced hardware sleep work with
    the latter from Ben Guthro.

 7) ACPI video driver cleanups and a blacklist of systems that should
    not tell the BIOS that they are compatible with Windows 8 (or ACPI
    backlight and possibly other things will not work on them).  From
    Felipe Contreras.

 8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo,
    Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen,
    Toshi Kani, and Wei Yongjun.

 9) cpufreq ondemand governor target frequency selection change to
    reduce oscillations between min and max frequencies (essentially,
    it causes the governor to choose target frequencies proportional
    to load) from Stratos Karafotis.

10) cpufreq fixes allowing sysfs attributes file permissions to be
    preserved over suspend/resume cycles Srivatsa S Bhat.

11) Removal of Device Tree parsing for CPU device nodes from multiple
    cpufreq drivers that required some changes related to
    of_get_cpu_node() to be made in a few architectures and in the
    driver core.  From Sudeep KarkadaNagesha.

12) cpufreq core fixes and cleanups related to mutual exclusion and
    driver module references from Viresh Kumar, Lukasz Majewski and
    Rafael J Wysocki.

13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap,
    Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo,
    Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd,
    Stratos Karafotis, and Viresh Kumar.

14) Fixes to prevent race conditions in coupled cpuidle from happening
    from Colin Cross.

15) cpuidle core fixes and cleanups from Daniel Lezcano and
    Tuukka Tikkanen.

16) Assorted cpuidle fixes and cleanups from Daniel Lezcano,
    Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij,
    and Sahara.

17) System sleep tracing changes from Todd E Brandt and Shuah Khan.

18) PNP subsystem conversion to using struct dev_pm_ops for power
    management from Shuah Khan.

* tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits)
  cpufreq: Don't use smp_processor_id() in preemptible context
  cpuidle: coupled: fix race condition between pokes and safe state
  cpuidle: coupled: abort idle if pokes are pending
  cpuidle: coupled: disable interrupts after entering safe state
  ACPI / hotplug: Remove containers synchronously
  driver core / ACPI: Avoid device hot remove locking issues
  cpufreq: governor: Fix typos in comments
  cpufreq: governors: Remove duplicate check of target freq in supported range
  cpufreq: Fix timer/workqueue corruption due to double queueing
  ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT
  ACPI / thermal: Add check of "_TZD" availability and evaluating result
  cpufreq: imx6q: Fix clock enable balance
  ACPI: blacklist win8 OSI for buggy laptops
  cpufreq: tegra: fix the wrong clock name
  cpuidle: Change struct menu_device field types
  cpuidle: Add a comment warning about possible overflow
  cpuidle: Fix variable domains in get_typical_interval()
  cpuidle: Fix menu_device->intervals type
  cpuidle: CodingStyle: Break up multiple assignments on single line
  cpuidle: Check called function parameter in get_typical_interval()
  ...

Pull SCSI target fixes from Nicholas Bellinger:
 "The first patch is to address a long standing issue where INQUIRY
  vendor + model response data was not correctly padded with ASCII
  spaces, causing MSFT and Falconstor multipath stacks to not function
  with our LUNs.

  The second -> forth patches are additional iscsi-target regression
  fixes for the post >= v3.10 iser-target changes.  The second and third
  are failure cases that have appeared during further testing, and the
  forth is only reproducible with malformed NOP packets.

  The fifth patch is a v3.11 specific regression caused by a recent
  optimization that showed up during WRITE I/O failure testing.

  I'll be sending Patch #1 and Patch #5 to Greg-KH separately for
  stable"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Fix se_cmd->state_list leak regression during WRITE failure
  iscsi-target: Fix potential NULL pointer in solicited NOPOUT reject
  iscsi-target: Fix iscsit_transport reference leak during NP thread reset
  iscsi-target: Fix ImmediateData=Yes failure regression in >= v3.10
  target: Fix trailing ASCII space usage in INQUIRY vendor+model

Pull first round of SCSI updates from James Bottomley:
 "This patch set is a set of driver updates (ufs, zfcp, lpfc, mpt2/3sas,
  qla4xxx, qla2xxx [adding support for ISP8044 + other things]).

  We also have a new driver: esas2r which has a number of static checker
  problems, but which I expect to resolve over the -rc course of 3.12
  under the new driver exception.

  We also have the error return that were discussed at LSF"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (118 commits)
  [SCSI] sg: push file descriptor list locking down to per-device locking
  [SCSI] sg: checking sdp->detached isn't protected when open
  [SCSI] sg: no need sg_open_exclusive_lock
  [SCSI] sg: use rwsem to solve race during exclusive open
  [SCSI] scsi_debug: fix logical block provisioning support when unmap_alignment != 0
  [SCSI] scsi_debug: fix endianness bug in sdebug_build_parts()
  [SCSI] qla2xxx: Update the driver version to 8.06.00.08-k.
  [SCSI] qla2xxx: print MAC via %pMR.
  [SCSI] qla2xxx: Correction to message ids.
  [SCSI] qla2xxx: Correctly print out/in mailbox registers.
  [SCSI] qla2xxx: Add a new interface to update versions.
  [SCSI] qla2xxx: Move queue depth ramp down message to i/o debug level.
  [SCSI] qla2xxx: Select link initialization option bits from current operating mode.
  [SCSI] qla2xxx: Add loopback IDC-TIME-EXTEND aen handling support.
  [SCSI] qla2xxx: Set default critical temperature value in cases when ISPFX00 firmware doesn't provide it
  [SCSI] qla2xxx: QLAFX00 make over temperature AEN handling informational, add log for normal temperature AEN
  [SCSI] qla2xxx: Correct Interrupt Register offset for ISPFX00
  [SCSI] qla2xxx: Remove handling of Shutdown Requested AEN from qlafx00_process_aen().
  [SCSI] qla2xxx: Send all AENs for ISPFx00 to above layers.
  [SCSI] qla2xxx: Add changes in initialization for ISPFX00 cards with BIOS
  ...

While we are likley to succeed and break out of this loop, it isn't
guaranteed.  We should be power and thread friendly if we do have to
go around for a second (or third, or more) attempt.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull tty/serial driver patches from Greg KH:
 "Here's the big tty/serial driver pull request for 3.12-rc1.

  Lots of n_tty reworks to resolve some very long-standing issues,
  removing the 3-4 different locks that were taken for every character.
  This code has been beaten on for a long time in linux-next with no
  reported regressions.

  Other than that, a range of serial and tty driver updates and
  revisions.  Full details in the shortlog"

* tag 'tty-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (226 commits)
  hvc_xen: Remove unnecessary __GFP_ZERO from kzalloc
  serial: imx: initialize the local variable
  tty: ar933x_uart: add device tree support and binding documentation
  tty: ar933x_uart: allow to build the driver as a module
  ARM: dts: msm: Update uartdm compatible strings
  devicetree: serial: Document msm_serial bindings
  serial: unify serial bindings into a single dir
  serial: fsl-imx-uart: Cleanup duplicate device tree binding
  tty: ar933x_uart: use config_enabled() macro to clean up ifdefs
  tty: ar933x_uart: remove superfluous assignment of ar933x_uart_driver.nr
  tty: ar933x_uart: use the clk API to get the uart clock
  tty: serial: cpm_uart: Adding proper request of GPIO used by cpm_uart driver
  serial: sirf: fix the amount of serial ports
  serial: sirf: define macro for some magic numbers of USP
  serial: icom: move array overflow checks earlier
  TTY: amiserial, remove unnecessary platform_set_drvdata()
  serial: st-asc: remove unnecessary platform_set_drvdata()
  msm_serial: Send more than 1 character on the console w/ UARTDM
  msm_serial: Add support for non-GSBI UARTDM devices
  msm_serial: Switch clock consumer strings and simplify code
  ...

Pull staging tree merge from Greg KH:
 "Here's the bit staging tree pull request for 3.12-rc1.

  Lots of staging driver updates, and fixes.  Lustre is finally enabled
  in the build, and lots of cleanup started happening in it.  There's a
  new wireless driver in here, and 2 new TTY drivers, which cause the
  overall lines added/removed to be quite large on the "added" side.

  The IIO driver updates are also coming through here, as they are tied
  to the staging iio drivers"

* tag 'staging-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (942 commits)
  staging: dwc2: make dwc2_core_params documentation more complete
  staging: dwc2: validate the value for phy_utmi_width
  staging: dwc2: interpret all hwcfg and related register at init time
  staging: dwc2: properly mask the GRXFSIZ register
  staging: dwc2: remove redundant register reads
  staging: dwc2: re-use hptxfsiz variable
  staging: dwc2: simplify debug output in dwc_hc_init
  staging: dwc2: add missing shift
  staging: dwc2: simplify register shift expressions
  staging: dwc2: only read the snpsid register once
  staging: dwc2: unshift non-bool register value constants
  staging: dwc2: fix off-by-one in check for max_packet_count parameter
  staging: dwc2: remove specific fifo size constants
  Staging:BCM:DDRInit.c:Renaming __FUNCTION__
  staging: bcm: remove Version.h file.
  staging: rtl8188eu: off by one in rtw_set_802_11_add_wep()
  staging: r8188eu: copying one byte too much
  staging: rtl8188eu: || vs && typo
  staging: r8188eu: off by one bugs
  staging: crystalhd: Resolve sparse 'different base types' warnings.
  ...

Merge tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg KH:
 "Here's the big driver core pull request for 3.12-rc1.

  Lots of tiny changes here fixing up the way sysfs attributes are
  created, to try to make drivers simpler, and fix a whole class race
  conditions with creations of device attributes after the device was
  announced to userspace.

  All the various pieces are acked by the different subsystem
  maintainers"

* tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits)
  firmware loader: fix pending_fw_head list corruption
  drivers/base/memory.c: introduce help macro to_memory_block
  dynamic debug: line queries failing due to uninitialized local variable
  sysfs: sysfs_create_groups returns a value.
  debugfs: provide debugfs_create_x64() when disabled
  rbd: convert bus code to use bus_groups
  firmware: dcdbas: use binary attribute groups
  sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled
  driver core: add #include <linux/sysfs.h> to core files.
  HID: convert bus code to use dev_groups
  Input: serio: convert bus code to use drv_groups
  Input: gameport: convert bus code to use drv_groups
  driver core: firmware: use __ATTR_RW()
  driver core: core: use DEVICE_ATTR_RO
  driver core: bus: use DRIVER_ATTR_WO()
  driver core: create write-only attribute macros for devices and drivers
  sysfs: create __ATTR_WO()
  driver-core: platform: convert bus code to use dev_groups
  workqueue: convert bus code to use dev_groups
  MEI: convert bus code to use dev_groups
  ...

Pull char/misc patches from Greg KH:
 "Here is the big char/misc driver pull request for 3.12-rc1

  Lots of driver updates all over the char/misc tree, full details in
  the shortlog"

* tag 'char-misc-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (62 commits)
  drivers: uio: Kconfig: add MMU dependancy for UIO
  drivers: uio: Add driver for Humusoft MF624 DAQ PCI card
  drivers: uio_pdrv_genirq: use dev_get_platdata()
  drivers: uio_pruss: use dev_get_platdata()
  drivers: uio_dmem_genirq: use dev_get_platdata()
  drivers: parport: Kconfig: exclude h8300 for PARPORT_PC
  drivers: misc: ti-st: fix potential race if st_kim_start fails
  Drivers: hv: vmbus: Do not attempt to negoatiate a new version prematurely
  misc: vmw_balloon: Remove braces to fix build for clang.
  Drivers: hv: vmbus: Fix a bug in the handling of channel offers
  vme: vme_ca91cx42.c: fix to pass correct device identity to free_irq()
  VMCI: Add support for virtual IOMMU
  VMCI: Remove non-blocking/pinned queuepair support
  uio: uio_pruss: remove unnecessary platform_set_drvdata()
  parport: amiga: remove unnecessary platform_set_drvdata()
  vme: vme_vmivme7805.c: add missing __iomem annotation
  vme: vme_ca91cx42.c: add missing __iomem annotation
  vme: vme_tsi148.c: add missing __iomem annotation
  drivers/misc/hpilo: Correct panic when an AUX iLO is detected
  uio: drop unused vma_count member in uio_device struct
  ...

Pull USB patches from Greg KH:
 "Here's the big USB driver pull request for 3.12-rc1

  Lots of USB driver fixes and updates.  Nothing major, just the normal
  xhci, gadget, and other driver changes.  Full details in the shortlog"

* tag 'usb-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (352 commits)
  usbcore: fix incorrect type in assignment in descriptors_changed()
  usbcore: compare and release one bos descriptor in usb_reset_and_verify_device()
  ehci: remove debugging statement with ehci statistics in ehci_stop()
  ehci: remove duplicate debug_async_open() prototype in ehci-dbg.c
  ehci: enable debugging code when CONFIG_DYNAMIC_DEBUG is set
  ehci: remove ehci_vdbg() verbose debugging statements
  Documentation sysfs-bus-usb: Document which files are used by libusb
  Documentation sysfs-bus-usb: Document the speed file used by libusb
  Documentation sysfs-bus-usb: Move files with known users to stable
  USB: fix build error when CONFIG_PM_SLEEP isn't enabled
  usb: r8a66597-hcd: use platform_{get,set}_drvdata()
  usb: phy-tegra-usb: use platform_{get,set}_drvdata()
  usb: acm gadget: Null termintate strings table
  dma: cppi41: off by one in desc_to_chan()
  xhci: Fix warning introduced by disabling runtime PM.
  dev-core: fix build break when DEBUG is enabled
  USB: OHCI: Allow runtime PM without system sleep
  usb: ohci-at91: remove unnecessary dev_set_drvdata()
  usb: renesas_usbhs: use platform_{get,set}_drvdata()
  usb: fotg210-udc: use platform_{get,set}_drvdata()
  ...

Pull first batch of s390 updates from Martin Schwidefsky:
 "The most interesting change is that Martin converted s390 to generic
  hardirqs.  Which means that all current architectures have been
  converted and that CONFIG_GENERIC_HARDIRQS can be removed.  Martin
  prepared a patch for that already (see genirq branch), but the best
  time to merge that is probably at the end of the merge window / begin
  of -rc1.

  Another patch converts s390 to software referenced bits instead of
  relying on the reference bit in the storage key.  Therefore s390
  doesn't use storage keys anymore, except for kvm.

  Besides that we have improvements, cleanups and fixes in PCI, DASD and
  all over the place."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (32 commits)
  s390/pci: use virtual memory for iommu bitmap
  s390/cio: fix unlocked access of global bitmap
  s390/pci: update function handle after resume from hibernate
  s390/pci: try harder to modify a function
  s390/pci: split lpf
  s390/hibernate: add early resume function
  s390/pci: add recover sysfs knob
  s390/pci: use claim_resource
  s390/pci/hotplug: convert to be builtin only
  s390/mm: implement software referenced bits
  s390/dasd: fix statistics for recovered requests
  s390/tx: allow program interruption filtering in user space
  s390/pgtable: fix mprotect for single-threaded KVM guests
  s390/time: return with irqs disabled from psw_idle
  s390/kprobes: add support for compare and branch instructions
  s390/switch_to: fix save_access_regs() / restore_access_regs()
  s390/bitops: fix inline assembly constraints
  s390/dasd: enable raw_track_access reads without direct I/O
  s390/mm: introduce ptep_flush_lazy helper
  s390/time: clock comparator revalidation
  ...

Pull m68k updates from Geert Uytterhoeven:
 "Summary:
   - Kill harmless warning messages when running a multi-platform kernel
     on Atari
   - Correct virt/phys mixups that didn't actually hurt due to identity
     mappings"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/atari: ARAnyM - Always use physical addresses in NatFeat calls
  m68k: Ignore disabled HSYNC interrupt on Atari for irqs_disabled()

Pull hwmon updates from Guenter Roeck:
 - new driver for HTU21D (humidity sensor)
 - add support for Fam16h (Kabini) to k10temp
 - add support for NCT6102D/6106D and NCT6791D to nct6775 driver
 - add support for ADS1115 to ads1015 driver
 - add support for hibernate to w83627ehf and nct6775 drivers
 - some minor cleanups

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (htu21) Add Measurement Specialties HTU21D support
  hwmon: Change my email address.
  hwmon: (k10temp) Add support for Fam16h (Kabini)
  hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0
  hwmon: (ads1015) Add support for ADS1115
  hwmon: (w83627ehf) Add support for hibernate
  hwmon: (nct6775) Add support for hibernate
  hwmon: use dev_get_platdata()
  hwmon: (nct6775) Fix size of data->temp array
  hwmon: (nct6775) Avoid using device platform data outside probe function
  hwmon: (nct6775) Add support for NCT6791D
  hwmon: (nct6775) Add support for beep attributes
  hwmon: (nct6775) Add support for critical low/high temperature limits on NCT6106
  hwmon: (nct6775) Add support for NCT6102D/6106D
  hwmon: (nct6775) Support two SuperIO chips in the same system
  hwmon: (nct6775) Allocate attributes dynamically from templates
  hwmon: (coretemp) Atom CPUs don't support TjMax; no warning needed

The check if the queue is full and adding current to the wait queue of
pending msgsnd() operations (ss_add()) must be atomic.

Otherwise:
 - the thread that performs msgsnd() finds a full queue and decides to
   sleep.
 - the thread that performs msgrcv() first reads all messages from the
   queue and then sleeps, because the queue is empty.
 - the msgrcv() calls do not perform any wakeups, because the msgsnd()
   task has not yet called ss_add().
 - then the msgsnd()-thread first calls ss_add() and then sleeps.

Net result: msgsnd() and msgrcv() both sleep forever.

Observed with msgctl08 from ltp with a preemptible kernel.

Fix: Call ipc_lock_object() before performing the check.

The patch also moves security_msg_queue_msgsnd() under ipc_lock_object:
 - msgctl(IPC_SET) explicitely mentions that it tries to expunge any
   pending operations that are not allowed anymore with the new
   permissions.  If security_msg_queue_msgsnd() is called without locks,
   then there might be races.
 - it makes the patch much simpler.
Reported-and-tested-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: stable@vger.kernel.org  # for 3.11
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull regulator updates from Mark Brown:
 "Not much exciting going on with the regulator API this time around,
  lots of driver fixes and enhancements - the main thing is the addition
  of a new API to help make the stubbing code do the right thing for
  missing regulator mappings.

  Highlights:

   - A new regulator_get_optional() API call for regulators that can be
     absent in normal operation.  This currently does nothing but will
     be used to improve the stubbing code for unspecified regulators,
     helping avoid some of the issues we've seen with adding new
     regulator support.
   - Helpers for devices with multiple linear ranges of voltages in the
     same regulator.
   - Moved the helpers into a separate file since core.c is getting
     rather large.
   - New drivers for Dialog DA9210 and DA9063, Freescale pfuze100 and
     Marvell 88pm800"

* tag 'regulator-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (70 commits)
  regulator: da9063: Statize da9063_ldo_lim_event
  regulator: lp872x: Make REGULATOR_LP872X depend on I2C rather than I2C=y
  regulator: tps65217: Convert to use linear ranges
  regulator: da9063: Use IS_ERR to check return value of regulator_register()
  regulator: da9063: Optimize da9063_set_current_limit implementation
  regulator: build: Allow most regulators to be built as modules
  regulator: Add devm_regulator_get_exclusive()
  regulator: da9063: Add Dialog DA9063 voltage regulators support.
  regulator: ti-abb: simplify platform_get_resource_byname/devm_ioremap_resource
  hwmon: (sht15) Use devm_regulator_get_optional()
  regulator: core: Use bool for exclusivitity flag
  regulator: 88pm800: forever loop in pm800_regulator_probe()
  cpufreq: cpufreq-cpu0: Use devm_regulator_get_optional()
  regulator: da9210: Remove redundant MODULE_ALIAS
  regulator: 88pm800: Fix checking whether num_regulator is valid
  regulator: s2mps11: Fix setting ramp_delay
  regulator: s2mps11: Fix wrong arguments for regmap_update_bits() call
  regulator: palmas: Update the DT binding doc for smps10 out1 and out2
  regulator: palmas: model SMPS10 as two regulators
  regulator: core: Move list_voltage_{linear,linear_range,table} to helpers.c
  ...

Pull spi updates from Mark Brown:
 "Business as usual for SPI - some new drivers, lots of fixes and
  updates to existing drivers plus some new framework features.  Notable
  changes are:

   - Support for dual and quad data lines, commonly used by flash chips
     to improve performance, from Wang Yuhang.
   - Factored out a common pattern for runtime PM implementation into
     the core saving a bunch of code.
   - A particularly nice set of updates to the ep93xx driver from
     H Hartley Sweeten, modernising it and reducing the code size a lot.
   - New drivers for Blackfin v3, EFM32, Freescale DSPI and TI QSPI"

* tag 'spi-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (133 commits)
  spi/qspi: fix missing unlock on error in ti_qspi_start_transfer_one()
  spi: quad: fix the name of DT property
  spi: core: Fix spi_register_master error handling
  spi: efm32: Fix build error
  spi: altera: Use DIV_ROUND_UP to calculate hw->bytes_per_word
  spi: rspi: Add spi_master_get() call to prevent use after free
  spi: quad: Make DT properties optional
  spi: quad: Fix missing return
  spi: Use dev_get_drvdata at appropriate places
  spi: use dev_get_platdata()
  spi: nuc900: Fix mode_bits setting
  spi: simplify devm_request_mem_region/devm_ioremap
  spi: altera: Simplify altera_spi_txrx implementation for noirq case
  spi: spi-rspi: fix inconsistent spin_lock_irqsave
  spi/qspi: Add compatible string for am4372.
  spi/qspi: Fix device table entry
  spi/sirf: fix the misunderstanding about len of spi_transfer
  spi/qspi: Add dual/quad spi read support
  spi: sirf: fix error return code in spi_sirfsoc_probe()
  spi: bcm2835: Add spi_master_get() call to prevent use after free
  ...

Pull regmap updates from Mark Brown:
 "A quiet release for regmap, some cleanups, fixes and:

   - Improved node coalescing for rbtree, reducing memory usage and
     improving performance during syncs.
   - Support for registering multiple register patches.
   - A quirk for handling interrupts that need to be clear when masked
     in regmap-irq"

* tag 'regmap-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: rbtree: Make cache_present bitmap per node
  regmap: rbtree: Reduce number of nodes, take 2
  regmap: rbtree: Simplify adjacent node look-up
  regmap: debugfs: Fix continued read from registers file
  regcache-rbtree: Fix reg_stride != 1
  regmap: Allow multiple patches to be registered
  regmap: regcache: allow read-only regs to be cached
  regmap: fix regcache_reg_present() for empty cache
  regmap: core: allow a virtual range to cover its own data window
  regmap: irq: document mask/wake_invert flags
  regmap: irq: make flags bool and put them in a bitfield
  regmap: irq: Allow to acknowledge masked interrupts during initialization
  regmap: Provide __acquires/__releases annotations

Merge lockref infrastructure code by me and Waiman Long.

I already merged some of the preparatory patches that didn't actually do
any semantic changes earlier, but this merges the actual _reason_ for
those preparatory patches.

The "lockref" structure is a combination "spinlock and reference count"
that allows optimized reference count accesses.  In particular, it
guarantees that the reference count will be updated AS IF the spinlock
was held, but using atomic accesses that cover both the reference count
and the spinlock words, we can often do the update without actually
having to take the lock.

This allows us to avoid the nastiest cases of spinlock contention on
large machines under heavy pathname lookup loads.  When updating the
dentry reference counts on a large system, we'll still end up with the
cache line bouncing around, but that's much less noticeable than
actually having to spin waiting for the lock.

* lockref:
  lockref: implement lockless reference count updates using cmpxchg()
  lockref: uninline lockref helper functions
  vfs: reimplement d_rcu_to_refcount() using lockref_get_or_lock()
  vfs: use lockref_get_not_zero() for optimistic lockless dget_parent()
  lockref: add 'lockref_get_or_lock() helper

The endianness attribute on the 'aux' local variable is wrong, and can
lead to wrong endianness on big-endian machines,
Signed-off-by: Marc Carino <marc.ceeeee@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Push file descriptor list locking down to per-device locking. Let sg_index_lock
only protect device lookup.
sdp->detached is also set and checked with this lock held.
Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

@detached is set under the protection of sg_index_lock. Without getting the
lock, new sfp will be added during sg removal and there is no chance for it
to be picked out. So check with sg_index_lock held in sg_add_sfp().
Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

Open exclusive check is protected by o_sem, no need sg_open_exclusive_lock.
@exclude is used to record which type of rwsem we are holding.
Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

A race condition may happen if two threads are both trying to open the same sg
with O_EXCL simultaneously. It's possible that they both find fsds list is
empty and get_exclude(sdp) returns 0, then they both call set_exclude() and
break out from wait_event_interruptible and resume open.

Now use rwsem to protect this process. Exclusive open gets write lock and
others get read lock. The lock will be held until file descriptor is closed.
This also leads 'exclude' only a status rather than a check mark.
Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

Commit b90ebc3d ("[SCSI] scsi_debug:
fix logical block provisioning support") fixed several issues with
logical block provisioning support, but it still doesn't properly fix
the cases when unmap_alignment > 0.

For example, load scsi_debug module with the following module parameters
and make all blocks mapped by filling the storage with zero.

        # modprobe scsi_debug lbpu=1 unmap_alignment=1 unmap_granularity=4
        # dd if=/dev/zero of=$DEV

Then, try to unmap the first unmappable blocks at lba=1, but GET LBA STATUS
unexpectedly reports that the last UNMAP has done nothing.

        # sg_unmap --lba=1 --num=4 $DEV
        # sg_get_lba_status --lba=1 $DEV
        descriptor LBA: 0x0000000000000001  blocks: 16383  mapped

The problem is in map_index_to_lba(), which should return the first
LBA which is corresponding to a given index of provisioning map
(map_storep).
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

With module parameter num_parts > 0, partition table is built on the
ramdisk storage when loading the driver.  Unfortunately, there is an
endianness bug in sdebug_build_parts().  So the partition table is not
correctly initialized on big-endian systems.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Tested-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>