- 08 May, 2017 2 commits
-
-
Ilan Tayari authored
Upon NETDEV_DOWN event, all xfrm_state objects which are bound to the device are flushed. The condition for this is wrong, though, testing dev->hw_features instead of dev->features. If a device has non-user-modifiable NETIF_F_HW_ESP, then its xfrm_state objects are not flushed, causing a crash later on after the device is deleted. Check dev->features instead of dev->hw_features. Fixes: d77e38e6 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by:
Ilan Tayari <ilant@mellanox.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
Steffen Klassert authored
The sadb_x_sec_len is stored in the unit 'byte divided by eight'. So we have to multiply this value by eight before we can do size checks. Otherwise we may get a slab-out-of-bounds when we memcpy the user sec_ctx. Fixes: df71837d ("[LSM-IPSec]: Security association restriction.") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
-
- 04 May, 2017 2 commits
-
-
Sabrina Dubroca authored
When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for that dst. Unfortunately, the code that allocates and fills this copy doesn't care about what type of flowi (flowi, flowi4, flowi6) gets passed. In multiple code paths (from raw_sendmsg, from TCP when replying to a FIN, in vxlan, geneve, and gre), the flowi that gets passed to xfrm is actually an on-stack flowi4, so we end up reading stuff from the stack past the end of the flowi4 struct. Since xfrm_dst->origin isn't used anywhere following commit ca116922 ("xfrm: Eliminate "fl" and "pol" args to xfrm_bundle_ok()."), just get rid of it. xfrm_dst->partner isn't used either, so get rid of that too. Fixes: 9d6ec938 ("ipv4: Use flowi4 in public route lookup interfaces.") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Steffen Klassert authored
Locally generated TCP packets are usually cloned, so we do skb_cow_data() on this packets. After that we need to reload the pointer to the esp header. On udpencap this header has an offset to skb_transport_header, so take this offset into account. Fixes: 67d349ed ("net/esp4: Fix invalid esph pointer crash") Fixes: fca11ebd ("esp4: Reorganize esp_output") Reported-by:
Don Bowman <db@donbowman.ca> Signed-off-by:
-
- 03 May, 2017 33 commits
-
-
David S. Miller authored
Nathan Fontenot says: ==================== ibmvnic: Updated reset handler and code fixes This set of patches multiple code fixes and a new rest handler for the ibmvnic driver. In order to implement the new reset handler for the ibmvnic driver resource initialization needed to be moved to its own routine, a state variable is introduced to replace the various is_* flags in the driver, and a new routine to handle the assorted reasons the driver can be reset. v4 updates: Patch 3/11: Corrected trailing whitespace Patch 7/11: Corrected trailing whitespace v3 updates: Patch 10/11: Correct patch subject line to be a description of the patch. v2 updates: Patch 11/11: Use __netif_subqueue_stopped() instead of netif_subqueue_stopped() to avoid possible use of an un-initialized skb variable. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Nathan Fontenot authored
Restart of the subqueue should occur outside of the loop processing any tx buffers instead of doing this in the middle of the loop. Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
-
Thomas Falcon authored
Map each RX SKB to the RX queue associated with the driver's RX SCRQ. This should improve the RX CPU load balancing issues seen by the performance team. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
Nathan Fontenot authored
There is not a need to stop processing skbs if we encounter a skb that has a receive completion error. Signed-off-by:
-
Nathan Fontenot authored
Move the check for the driver resetting to the first thing in ibmvnic_xmit(). Signed-off-by:
-
Nathan Fontenot authored
When closing the ibmvnic driver we need to wait for any pending sub crq entries to ensure they are handled. Signed-off-by:
-
Nathan Fontenot authored
When closing the ibmvnic driver, most notably during the reset path, the tx pools need to be cleaned to ensure there are no hanging skbs that need to be free'ed. The need for this was found during debugging a loss of network traffic after handling a driver reset. The underlying cause was some skbs in the tx pool that were never free'ed. As a result the upper network layers never tried a re-send since it believed the driver still had the skb. Signed-off-by:
-
Nathan Fontenot authored
Signed-off-by:
-
Nathan Fontenot authored
The napi structs allocated at drivier initializatio need to be free'ed when releasing the drivers resources. Signed-off-by:
-
Nathan Fontenot authored
The ibmvnic driver has multiple handlers for resetting the driver depending on the reason the reset is needed (failover, lpm, fatal erors,...). All of the reset handlers do essentially the same thing, this patch moves this work to a common reset handler. By doing this we also allow the driver to better handle situations where we can get a reset while handling a reset. The updated reset handling works by adding a reset work item to the list of resets and then scheduling work to perform the reset. This step is necessary because we can receive a reset in interrupt context and we want to handle the reset out of interrupt context. Signed-off-by:
-
Nathan Fontenot authored
Replace the is_closed flag in the ibmvnic adapter strcut with a more comprehensive state field that tracks the current state of the driver. Signed-off-by:
-
Nathan Fontenot authored
Move all of the calls to initialize resources for the driver to a separate routine. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS/OVS fixes for net The following patchset contains a rather large batch of Netfilter, IPVS and OVS fixes for your net tree. This includes fixes for ctnetlink, the userspace conntrack helper infrastructure, conntrack OVS support, ebtables DNAT target, several leaks in error path among other. More specifically, they are: 1) Fix reference count leak in the CT target error path, from Gao Feng. 2) Remove conntrack entry clashing with a matching expectation, patch from Jarno Rajahalme. 3) Fix bogus EEXIST when registering two different userspace helpers, from Liping Zhang. 4) Don't leak dummy elements in the new bitmap set type in nf_tables, from Liping Zhang. 5) Get rid of module autoload from conntrack update path in ctnetlink, we don't need autoload at this late stage and it is happening with rcu read lock held which is not good. From Liping Zhang. 6) Fix deadlock due to double-acquire of the expect_lock from conntrack update path, this fixes a bug that was introduced when the central spinlock got removed. Again from Liping Zhang. 7) Safe ct->status update from ctnetlink path, from Liping. The expect_lock protection that was selected when the central spinlock was removed was not really protecting anything at all. 8) Protect sequence adjustment under ct->lock. 9) Missing socket match with IPv6, from Peter Tirsek. 10) Adjust skb->pkt_type of DNAT'ed frames from ebtables, from Linus Luessing. 11) Don't give up on evaluating the expression on new entries added via dynset expression in nf_tables, from Liping Zhang. 12) Use skb_checksum() when mangling icmpv6 in IPv6 NAT as this deals with non-linear skbuffs. 13) Don't allow IPv6 service in IPVS if no IPv6 support is available, from Paolo Abeni. 14) Missing mutex release in error path of xt_find_table_lock(), from Dan Carpenter. 15) Update maintainers files, Netfilter section. Add Florian to the file, refer to nftables.org and change project status from Supported to Maintained. 16) Bail out on mismatching extensions in element updates in nf_tables. ==================== Signed-off-by: -
Geert Uytterhoeven authored
If gcc (e.g. 4.1.2) decides not to inline total_extension_size(), the build will fail with: net/built-in.o: In function `nf_conntrack_init_start': (.text+0x9baf6): undefined reference to `__compiletime_assert_1893' or ERROR: "__compiletime_assert_1893" [net/netfilter/nf_conntrack.ko] undefined! Fix this by forcing inlining of total_extension_size(). Fixes: b3a5db10 ("netfilter: conntrack: use u8 for extension sizes again") Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Geert Uytterhoeven authored
On 32-bit: lib/test_bpf.c:4772: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4772: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4773: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4773: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4787: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4787: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4801: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4801: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4802: warning: integer constant is too large for ‘unsigned long’ type lib/test_bpf.c:4802: warning: integer constant is too large for ‘unsigned long’ type On 32-bit systems, "long" is only 32-bit. Replace the "UL" suffix by "ULL" to fix this. Fixes: 85f68fe8 ("bpf, arm64: implement jiting of BPF_XADD") Signed-off-by:Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Daniele Palmas authored
This patch adds support for Telit ME910 PID 0x1100. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
YueHaibing authored
Now tg3 NIC's stats will be cleared after ifdown/ifup. bond_get_stats traverse its salves to get statistics,cumulative the increment.If a tg3 NIC is added to bonding as a slave,ifdown/ifup will cause bonding's stats become tremendous value (ex.1638.3 PiB) because of negative increment. Fixes: 92feeabf ("tg3: Save stats across chip resets") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Alexei Starovoitov authored
-D__x86_64__ workaround was used to make /usr/include/features.h to follow expected path through the system include headers. This is not portable. Instead define dummy stubs.h which is used by 'clang -target bpf' Fixes: 6882804c ("selftests/bpf: add a test for overlapping packet range checks") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Yonghong Song authored
With clang/llvm 4.0+, the test case is able to generate the following pattern: .... 440: (b7) r1 = 15 441: (05) goto pc+73 515: (79) r6 = *(u64 *)(r10 -152) 516: (bf) r7 = r10 517: (07) r7 += -112 518: (bf) r2 = r7 519: (0f) r2 += r1 520: (71) r1 = *(u8 *)(r8 +0) 521: (73) *(u8 *)(r2 +45) = r1 .... commit 332270fd ("bpf: enhance verifier to understand stack pointer arithmetic") improved verifier to handle such a pattern. This patch adds a C test case to actually generate such a pattern. A dummy tracepoint interface is used to load the program into the kernel. Signed-off-by:
Yonghong Song <yhs@fb.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
-
Daniel Borkmann authored
Small follow-up to d74a32ac ("xdp: use netlink extended ACK reporting") in order to let drivers all use the same NL_SET_ERR_MSG_MOD() helper macro for reporting. This also ensures that we consistently add the driver's prefix for dumping the report in user space to indicate that the error message is driver specific and not coming from core code. Furthermore, NL_SET_ERR_MSG_MOD() now reuses NL_SET_ERR_MSG() and thus makes all macros check the pointer as suggested. References: https://www.spinics.net/lists/netdev/msg433267.htmlSigned-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
David Ahern authored
Andrey reported a warning triggered by the rcu code: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 5911 at lib/debugobjects.c:289 debug_print_object+0x175/0x210 ODEBUG: activate active (active state 1) object type: rcu_head hint: (null) Modules linked in: CPU: 1 PID: 5911 Comm: a.out Not tainted 4.11.0-rc8+ #271 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x192/0x22d lib/dump_stack.c:52 __warn+0x19f/0x1e0 kernel/panic.c:549 warn_slowpath_fmt+0xe0/0x120 kernel/panic.c:564 debug_print_object+0x175/0x210 lib/debugobjects.c:286 debug_object_activate+0x574/0x7e0 lib/debugobjects.c:442 debug_rcu_head_queue kernel/rcu/rcu.h:75 __call_rcu.constprop.76+0xff/0x9c0 kernel/rcu/tree.c:3229 call_rcu_sched+0x12/0x20 kernel/rcu/tree.c:3288 rt6_rcu_free net/ipv6/ip6_fib.c:158 rt6_release+0x1ea/0x290 net/ipv6/ip6_fib.c:188 fib6_del_route net/ipv6/ip6_fib.c:1461 fib6_del+0xa42/0xdc0 net/ipv6/ip6_fib.c:1500 __ip6_del_rt+0x100/0x160 net/ipv6/route.c:2174 ip6_del_rt+0x140/0x1b0 net/ipv6/route.c:2187 __ipv6_ifa_notify+0x269/0x780 net/ipv6/addrconf.c:5520 addrconf_ifdown+0xe60/0x1a20 net/ipv6/addrconf.c:3672 ... Andrey's reproducer program runs in a very tight loop, calling 'unshare -n' and then spawning 2 sets of 14 threads running random ioctl calls. The relevant networking sequence: 1. New network namespace created via unshare -n - ip6tnl0 device is created in down state 2. address added to ip6tnl0 - equivalent to ip -6 addr add dev ip6tnl0 fd00::bb/1 - DAD is started on the address and when it completes the host route is inserted into the FIB 3. ip6tnl0 is brought up - the new fixup_permanent_addr function restarts DAD on the address 4. exit namespace - teardown / cleanup sequence starts - once in a blue moon, lo teardown appears to happen BEFORE teardown of ip6tunl0 + down on 'lo' removes the host route from the FIB since the dst->dev for the route is loobback + host route added to rcu callback list * rcu callback has not run yet, so rt is NOT on the gc list so it has NOT been marked obsolete 5. in parallel to 4. worker_thread runs addrconf_dad_completed - DAD on the address on ip6tnl0 completes - calls ipv6_ifa_notify which inserts the host route All of that happens very quickly. The result is that a host route that has been deleted from the IPv6 FIB and added to the RCU list is re-inserted into the FIB. The exit namespace eventually gets to cleaning up ip6tnl0 which removes the host route from the FIB again, calls the rcu function for cleanup -- and triggers the double rcu trace. The root cause is duplicate DAD on the address -- steps 2 and 3. Arguably, DAD should not be started in step 2. The interface is in the down state, so it can not really send out requests for the address which makes starting DAD pointless. Since the second DAD was introduced by a recent change, seems appropriate to use it for the Fixes tag and have the fixup function only start DAD for addresses in the PREDAD state which occurs in addrconf_ifdown if the address is retained. Big thanks to Andrey for isolating a reliable reproducer for this problem. Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional") Reported-by:David Ahern <dsahern@gmail.com> Tested-by:
-
David Cai authored
Adding support for Microchip LAN9250 Ethernet controller. Signed-off-by:
David Cai <david.cai@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Jesper Dangaard Brouer says: ==================== Improve bpf ELF-loader under samples/bpf This series improves and fixes bpf ELF loader and programs under samples/bpf. The bpf_load.c created some hard to debug issues when the struct (bpf_map_def) used in the ELF maps section format changed in commit fb30d4b7 ("bpf: Add tests for map-in-map"). This was hotfixed in commit 409526bea3c3 ("samples/bpf: bpf_load.c detect and abort if ELF maps section size is wrong") by detecting the issue and aborting the program. In most situations the bpf-loader should be able to handle these kind of changes to the struct size. This patch series aim to do proper backward and forward compabilility handling when loading ELF files. This series also adjust the callback that was introduced in commit 9fd63d05 ("bpf: Allow bpf sample programs (*_user.c) to change bpf_map_def") to use the new bpf_map_data structure, before more users start to use this callback. Hoping these changes can make the merge window, as above mentioned commits have not been merged yet, and it would be good to avoid users hitting these issues. ==================== Acked-by:
-
Jesper Dangaard Brouer authored
Giving *_user.c side tools access to map_data[] provides easier access to information on the maps being loaded. Still provide the guarantee that the order maps are being defined in inside the _kern.c file corresponds with the order in the array. Now user tools are not blind, but can inspect and verify the maps that got loaded from the ELF binary. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
Do this change before others start to use this callback. Change map_perf_test_user.c which seems to be the only user. This patch extends capabilities of commit 9fd63d05 ("bpf: Allow bpf sample programs (*_user.c) to change bpf_map_def"). Give fixup callback access to struct bpf_map_data, instead of only stuct bpf_map_def. This add flexibility to allow userspace to reassign the map file descriptor. This is very useful when wanting to share maps between several bpf programs. Signed-off-by:
-
Jesper Dangaard Brouer authored
This patch does proper parsing of the ELF "maps" section, in-order to be both backwards and forwards compatible with changes to the map definition struct bpf_map_def, which gets compiled into the ELF file. The assumption is that new features with value zero, means that they are not in-use. For backward compatibility where loading an ELF file with a smaller struct bpf_map_def, only copy objects ELF size, leaving rest of loaders struct zero. For forward compatibility where ELF file have a larger struct bpf_map_def, only copy loaders own struct size and verify that rest of the larger struct is zero, assuming this means the newer feature was not activated, thus it should be safe for this older loader to load this newer ELF file. Fixes: fb30d4b7 ("bpf: Add tests for map-in-map") Fixes: 409526bea3c3 ("samples/bpf: bpf_load.c detect and abort if ELF maps section size is wrong") Signed-off-by:
-
Jesper Dangaard Brouer authored
Needed to adjust max locked memory RLIMIT_MEMLOCK for testing these bpf samples as these are using more and larger maps than can fit in distro default 64Kbytes limit. Signed-off-by:
-
Pablo Neira Ayuso authored
If no NLM_F_EXCL is set and the element already exists in the set, make sure that both elements have the same extensions. Signed-off-by:Pablo Neira Ayuso <pablo@netfilter.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds authored
Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: tty: fix comment for __tty_alloc_driver() init/main: properly align the multi-line comment init/main: Fix double "the" in comment Fix dead URLs to ftp.kernel.org drivers: Clean up duplicated email address treewide: Fix typo in xml/driver-api/basics.xml tools/testing/selftests/powerpc: remove redundant CFLAGS in Makefile: "-Wall -O2 -Wall" -> "-O2 -Wall" selftests/timers: Spelling s/privledges/privileges/ HID: picoLCD: Spelling s/REPORT_WRTIE_MEMORY/REPORT_WRITE_MEMORY/ net: phy: dp83848: Fix Typo UBI: Fix typos Documentation: ftrace.txt: Correct nice value of 120 priority net: fec: Fix typo in error msg and comment treewide: Fix typos in printk
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatchingLinus Torvalds authored
Pull livepatch updates from Jiri Kosina: - a per-task consistency model is being added for architectures that support reliable stack dumping (extending this, currently rather trivial set, is currently in the works). This extends the nature of the types of patches that can be applied by live patching infrastructure. The code stems from the design proposal made [1] back in November 2014. It's a hybrid of SUSE's kGraft and RH's kpatch, combining advantages of both: it uses kGraft's per-task consistency and syscall barrier switching combined with kpatch's stack trace switching. There are also a number of fallback options which make it quite flexible. Most of the heavy lifting done by Josh Poimboeuf with help from Miroslav Benes and Petr Mladek [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz - module load time patch optimization from Zhou Chengming - a few assorted small fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: add missing printk newlines livepatch: Cancel transition a safe way for immediate patches livepatch: Reduce the time of finding module symbols livepatch: make klp_mutex proper part of API livepatch: allow removal of a disabled patch livepatch: add /proc/<pid>/patch_state livepatch: change to a per-task consistency model livepatch: store function sizes livepatch: use kstrtobool() in enabled_store() livepatch: move patching functions into patch.c livepatch: remove unnecessary object loaded check livepatch: separate enabled and patched states livepatch/s390: add TIF_PATCH_PENDING thread flag livepatch/s390: reorganize TIF thread flag bits livepatch/powerpc: add TIF_PATCH_PENDING thread flag livepatch/x86: add TIF_PATCH_PENDING thread flag livepatch: create temporary klp_update_patch_state() stub x86/entry: define _TIF_ALLWORK_MASK flags explicitly stacktrace/x86: add function for detecting reliable stack traces
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID subsystem updates from Jiri Kosina: - The need for HID_QUIRK_NO_INIT_REPORTS per-device quirk has been growing dramatically during past years, so the time has come to switch over the default, and perform the pro-active reading only in cases where it's really needed (multitouch, wacom). The only place where this behavior is (in some form) preserved is hiddev so that we don't introduce userspace-visible change of behavior. From Benjamin Tissoires - HID++ support for power_supply / baterry reporting. From Benjamin Tissoires and Bastien Nocera - Vast improvements / rework of DS3 and DS4 in Sony driver. From Roderick Colenbrander - Improvment (in terms of getting closer to the Microsoft's interpretation of slightly ambiguous specification) of logical range interpretation in case null-state is set in the rdesc. From Valtteri Heikkilä and Tomasz Kramkowski - A lot of newly supported device IDs and small assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (71 commits) HID: usbhid: Add HID_QUIRK_NOGET for Aten CS-1758 KVM switch HID: asus: support backlight on USB keyboards HID: wacom: Move wacom_remote_irq and wacom_remote_status_irq HID: wacom: generic: sync pad events only for actual packets HID: sony: remove redundant check for -ve err HID: sony: Make sure to unregister sensors on failure HID: sony: Make DS4 bt poll interval adjustable HID: sony: Set proper bit flags on DS4 output report HID: sony: DS4 use brighter LED colors HID: sony: Improve navigation controller axis/button mapping HID: sony: Use DS3 MAC address as unique identifier on USB HID: logitech-hidpp: add a sysfs file to tell we support power_supply HID: logitech-hidpp: enable HID++ 1.0 battery reporting HID: logitech-hidpp: add support for battery status for the K750 HID: logitech-hidpp: battery: provide CAPACITY_LEVEL HID: logitech-hidpp: rename battery level into capacity HID: logitech-hidpp: battery: provide ONLINE property HID: logitech-hidpp: notify battery on connect HID: logitech-hidpp: return an error if the queried feature is not present HID: logitech-hidpp: create the battery for all types of HID++ devices ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.12 cycle. The extra week before the merge window actually resulted in some of the type of fixes that usually arrive after the merge window already starting to trickle in from eager developers using -next, I'm impressed. I have recruited a Samsung subsubsystem maintainer (Krzysztof) to deal with the onset of Samsung patches. It works great. Apart from that it is a boring round, just incremental updates and fixes all over the place, no serious core changes or anything exciting like that. The most pleasing to see is Julia Cartwrights work to audit the irqchip-providing drivers for realtime locking compliance. It's one of those "I should really get around to looking into that" things that have been on my TODO list since forever. Summary: Core changes: - add bi-directional and output-enable pin configurations to the generic bindings and generic pin controlling core. New drivers or subdrivers: - Armada 37xx SoC pin controller and GPIO support. - Axis ARTPEC-6 SoC pin controller support. - AllWinner A64 R_PIO controller support, and opening up the AllWinner sunxi driver for ARM64 use. - Rockchip RK3328 support. - Renesas R-Car H3 ES2.0 support. - STM32F469 support in the STM32 driver. - Aspeed G4 and G5 pin controller support. Improvements: - a whole slew of realtime improvements to drivers implementing irqchips: BCM, AMD, SiRF, sunxi, rockchip. - switch meson driver to get the GPIO ranges from the device tree. - input schmitt trigger support on the Rockchip driver. - enable the sunxi (AllWinner) driver to also be used on ARM64 silicon. - name the Qualcomm QDF2xxx GPIO lines. - support GMMR GPIO regions on the Intel Cherryview. This fixes a serialization problem on these platforms. - pad retention support for the Samsung Exynos 5433. - handle suspend-to-ram in the AT91-pio4 driver. - pin configuration support in the Aspeed driver. Cleanups: - the final name of Rockchip RK1108 was RV1108 so rename the driver and variables to stay consistent" * tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits) pinctrl: mediatek: Add missing pinctrl bindings for mt7623 pinctrl: artpec6: Fix return value check in artpec6_pmx_probe() pinctrl: artpec6: Remove .owner field for driver pinctrl: tegra: xusb: Silence sparse warnings ARM: at91/at91-pinctrl documentation: fix spelling mistake: "contoller" -> "controller" pinctrl: make artpec6 explicitly non-modular pinctrl: aspeed: g5: Add pinconf support pinctrl: aspeed: g4: Add pinconf support pinctrl: aspeed: Add core pinconf support pinctrl: aspeed: Document pinconf in devicetree bindings pinctrl: Add st,stm32f469-pinctrl compatible to stm32-pinctrl pinctrl: stm32: Add STM32F469 MCU support Documentation: dt: Remove ngpios from stm32-pinctrl binding pinctrl: stm32: replace device_initcall() with arch_initcall() pinctrl: stm32: add possibility to use gpio-ranges to declare bank range pinctrl: armada-37xx: Add gpio support pinctrl: armada-37xx: Add pin controller support for Armada 37xx pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers pinctrl: core: Make pinctrl_init_controller() static pinctrl: generic: Add bi-directional and output-enable ... -
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC updates from Ulf Hansson: "MMC core: - Continue to re-factor code to prepare for eMMC CMDQ and blkmq support - Introduce queue semantics to prepare for eMMC CMDQ and blkmq support - Add helper functions to manage temporary enable/disable of eMMC CMDQ - Improve wait-busy detection for SDIO MMC host: - cavium: Add driver to support Cavium controllers - cavium: Extend Cavium driver to support Octeon and ThunderX SOCs - bcm2835: Add new driver for Broadcom BCM2835 controller - sdhci-xenon: Add driver to support Marvell Xenon SDHCI controller - sdhci-tegra: Add support for the Tegra186 variant - sdhci-of-esdhc: Support for UHS-I SD cards - sdhci-of-esdhc: Support for eMMC HS200 cards - sdhci-cadence: Add eMMC HS400 enhanced strobe support - sdhci-esdhc-imx: Reset tuning circuit when needed - sdhci-pci: Modernize and clean-up some PM related code - sdhci-pci: Avoid re-tuning at runtime PM for some Intel devices - sdhci-pci|acpi: Use aggressive PM for some Intel BYT controllers - sdhci: Re-factoring and modernizations - sdhci: Optimize delay loops - sdhci: Improve register dump print format - sdhci: Add support for the Command Queue Engine - meson-gx: Various improvements and clean-ups - meson-gx: Add support for CMD23 - meson-gx: Basic tuning support to avoid CRC errors - s3cmci: Enable probing via DT - mediatek: Improve tuning support for eMMC HS200 and HS400 mode - tmio: Improve DMA support - tmio: Use correct response for CMD12 - dw_mmc: Minor improvements and clean-ups" * tag 'mmc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (148 commits) mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a mmc: sdhci-of-esdhc: poll ESDHC_CLOCK_STABLE bit with udelay mmc: sdhci-xenon: Fix default value of LOGIC_TIMING_ADJUST for eMMC5.0 PHY mmc: sdhci-xenon: Fix the work flow in xenon_remove(). MIPS: Octeon: cavium_octeon_defconfig: Enable Octeon MMC mmc: sdhci-xenon: Remove redundant dev_err call in get_dt_pad_ctrl_data() mmc: cavium: Use module_pci_driver to simplify the code mmc: cavium: Add MMC support for Octeon SOCs. mmc: cavium: Fix detection of block or byte addressing. mmc: core: Export API to allow hosts to get the card address mmc: sdio: Fix sdio wait busy implement limitation mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card clk: apn806: fix spelling mistake: "mising" -> "missing" mmc: sdhci-of-esdhc: add delay between tuning cycles mmc: sdhci: Control the delay between tuning commands mmc: sdhci-of-esdhc: add tuning support mmc: sdhci-of-esdhc: add support for signal voltage switch mmc: sdhci-of-esdhc: add peripheral clock support mmc: sdhci-pci: Allow for 3 bytes from Intel DSM mmc: cavium: Fix a shift wrapping bug ...
-
- 02 May, 2017 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking updates from David Millar: "Here are some highlights from the 2065 networking commits that happened this development cycle: 1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri) 2) Add a generic XDP driver, so that anyone can test XDP even if they lack a networking device whose driver has explicit XDP support (me). 3) Sparc64 now has an eBPF JIT too (me) 4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei Starovoitov) 5) Make netfitler network namespace teardown less expensive (Florian Westphal) 6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana) 7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger) 8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky) 9) Multiqueue support in stmmac driver (Joao Pinto) 10) Remove TCP timewait recycling, it never really could possibly work well in the real world and timestamp randomization really zaps any hint of usability this feature had (Soheil Hassas Yeganeh) 11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay Aleksandrov) 12) Add socket busy poll support to epoll (Sridhar Samudrala) 13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso, and several others) 14) IPSEC hw offload infrastructure (Steffen Klassert)" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits) tipc: refactor function tipc_sk_recv_stream() tipc: refactor function tipc_sk_recvmsg() net: thunderx: Optimize page recycling for XDP net: thunderx: Support for XDP header adjustment net: thunderx: Add support for XDP_TX net: thunderx: Add support for XDP_DROP net: thunderx: Add basic XDP support net: thunderx: Cleanup receive buffer allocation net: thunderx: Optimize CQE_TX handling net: thunderx: Optimize RBDR descriptor handling net: thunderx: Support for page recycling ipx: call ipxitf_put() in ioctl error path net: sched: add helpers to handle extended actions qed*: Fix issues in the ptp filter config implementation. qede: Fix concurrency issue in PTP Tx path processing. stmmac: Add support for SIMATIC IOT2000 platform net: hns: fix ethtool_get_strings overflow in hns driver tcp: fix wraparound issue in tcp_lp bpf, arm64: fix jit branch offset related to ldimm64 bpf, arm64: implement jiting of BPF_XADD ... -
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.12: API: - Add batch registration for acomp/scomp - Change acomp testing to non-unique compressed result - Extend algorithm name limit to 128 bytes - Require setkey before accept(2) in algif_aead Algorithms: - Add support for deflate rfc1950 (zlib) Drivers: - Add accelerated crct10dif for powerpc - Add crc32 in stm32 - Add sha384/sha512 in ccp - Add 3des/gcm(aes) for v5 devices in ccp - Add Queue Interface (QI) backend support in caam - Add new Exynos RNG driver - Add ThunderX ZIP driver - Add driver for hardware random generator on MT7623 SoC" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits) crypto: stm32 - Fix OF module alias information crypto: algif_aead - Require setkey before accept(2) crypto: scomp - add support for deflate rfc1950 (zlib) crypto: scomp - allow registration of multiple scomps crypto: ccp - Change ISR handler method for a v5 CCP crypto: ccp - Change ISR handler method for a v3 CCP crypto: crypto4xx - rename ce_ring_contol to ce_ring_control crypto: testmgr - Allow ecb(cipher_null) in FIPS mode Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT" crypto: ccp - Disable interrupts early on unload crypto: ccp - Use only the relevant interrupt bits hwrng: mtk - Add driver for hardware random generator on MT7623 SoC dt-bindings: hwrng: Add Mediatek hardware random generator bindings crypto: crct10dif-vpmsum - Fix missing preempt_disable() crypto: testmgr - replace compression known answer test crypto: acomp - allow registration of multiple acomps hwrng: n2 - Use devm_kcalloc() in n2rng_probe() crypto: chcr - Fix error handling related to 'chcr_alloc_shash' padata: get_next is never NULL crypto: exynos - Add new Exynos RNG driver ...
-
David S. Miller authored
Jon Maloy says: ==================== tipc: refactor socket receive functions We try to make the functions tipc_sk_recvmsg() and tipc_sk_recvstream() more readable. ==================== Signed-off-by:
-
