- 24 Apr, 2018 23 commits
-
-
Lorenzo Bianconi authored
Fix mcu initial configuration for tssi calibration on 5GHz band Fixes: 7bc04215 ("mt76: add driver code for MT76x2e") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Jakub Kicinski <kubakici@wp.pl> Signed-off-by:
-
Ping-Ke Shih authored
Since the statements are identical, we can safely remove the statements. The commit 42e74946 ("rtlwifi: btcoexist: Fix if == else warnings in halbtc8821a1ant.c") had fixed the statements, but the commit c6821613 ("rtlwifi: btcoex: follow linux coding style") that converted coding style and upgraded btcoex didn't include the fix. Reported-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Siva Rebbagondla authored
While performing cleanup, driver is messing with card->ocr value by not masking rocr against ocr_avail. Below panic is observed with some of the SDIO host controllers due to this. Issue is resolved by reverting incorrect modifications to vdd. [ 927.423821] mmc1: Invalid vdd 0x1f [ 927.423925] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic [ 927.424073] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000-caracalla #1 [ 927.424075] Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.06 01/22/2018 [ 927.424082] RIP: 0010:sdhci_set_power_noreg+0xdd/0x190[sdhci] [ 927.424085] RSP: 0018:ffffac3fc064b930 EFLAGS: 00010282 [ 927.424107] Call Trace: [ 927.424118] sdhci_set_power+0x5a/0x60 [sdhci] [ 927.424125] sdhci_set_ios+0x360/0x3b0 [sdhci] [ 927.424133] mmc_set_initial_state+0x92/0x120 [ 927.424137] mmc_power_up.part.34+0x33/0x1d0 [ 927.424141] mmc_power_up+0x17/0x20 [ 927.424147] mmc_sdio_runtime_resume+0x2d/0x50 [ 927.424151] mmc_runtime_resume+0x17/0x20 [ 927.424156] __rpm_callback+0xc4/0x200 [ 927.424161] ? idr_alloc_cyclic+0x57/0xd0 [ 927.424165] ? mmc_runtime_suspend+0x20/0x20 [ 927.424169] rpm_callback+0x24/0x80 [ 927.424172] ? mmc_runtime_suspend+0x20/0x20 [ 927.424176] rpm_resume+0x4b3/0x6c0 [ 927.424181] __pm_runtime_resume+0x4e/0x80 [ 927.424188] driver_probe_device+0x41/0x490 [ 927.424192] __driver_attach+0xdf/0xf0 [ 927.424196] ? driver_probe_device+0x490/0x490 [ 927.424201] bus_for_each_dev+0x6c/0xc0 [ 927.424205] driver_attach+0x1e/0x20 [ 927.424209] bus_add_driver+0x1f4/0x270 [ 927.424217] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424221] driver_register+0x60/0xe0 [ 927.424227] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424231] sdio_register_driver+0x20/0x30 [ 927.424237] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by:
Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
-
Siva Rebbagondla authored
Following overflow kernel panic is observed on some platforms while loading the driver. It is fixed if dynamically allocated memory is passed to SDIO instead of static one [ 927.513963] nommu_map_sg: overflow 17d54064ba7c+20 of device mask ffffffff [ 927.517712] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic snd_soc_sst_bytcr_rt5660 [ 927.517861] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000 #1 [ 927.517870] RIP: 0010:sdhci_send_command+0x5f0/0xa90 [sdhci] [ 927.517873] RSP: 0000:ffffac3fc064b6d8 EFLAGS: 00010086 [ 927.517895] Call Trace: [ 927.517908] ? __schedule+0x3cd/0x890 [ 927.517915] ? mod_timer+0x17b/0x3c0 [ 927.517922] sdhci_request+0x7c/0xf0 [sdhci] [ 927.517928] __mmc_start_request+0x5a/0x170 [ 927.517932] mmc_start_request+0x74/0x90 [ 927.517936] mmc_wait_for_req+0x87/0xe0 [ 927.517940] mmc_io_rw_extended+0x2fd/0x330 [ 927.517946] ? mmc_wait_data_done+0x30/0x30 [ 927.517951] sdio_io_rw_ext_helper+0x160/0x210 [ 927.517956] sdio_writesb+0x1d/0x20 [ 927.517966] rsi_sdio_write_register_multiple+0x68/0x110 [rsi_sdio] [ 927.517976] rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517983] ? rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517990] rsi_probe+0x2c6/0x450 [rsi_sdio] [ 927.517995] sdio_bus_probe+0xfc/0x110 [ 927.518000] driver_probe_device+0x2b3/0x490 [ 927.518005] __driver_attach+0xdf/0xf0 [ 927.518008] ? driver_probe_device+0x490/0x490 [ 927.518014] bus_for_each_dev+0x6c/0xc0 [ 927.518018] driver_attach+0x1e/0x20 [ 927.518021] bus_add_driver+0x1f4/0x270 [ 927.518028] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518031] driver_register+0x60/0xe0 [ 927.518038] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518041] sdio_register_driver+0x20/0x30 [ 927.518047] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by:
-
Amitkumar Karwar authored
Currently 5GHz gets advertised even for the device which supports only 2.4Ghz band. This patch fixes the issue Signed-off-by:
-
Amitkumar Karwar authored
Power save is by default enabled for WLAN and BT coex mode. Signed-off-by:
-
Amitkumar Karwar authored
Currently TID is extracted by checking at specific offset in data frame. This approach doesn't work for some of the frames. This patch uses mac80211 API and do it correctly Signed-off-by:
-
Amitkumar Karwar authored
Maximum number of supported aggregation subframes has been increased to 8. This is the optimal number for the driver. Signed-off-by:
-
Amitkumar Karwar authored
Power save request should be sent on station interface. Virtual interface which is connected should be preferred. This patch resolves device not entering power save problem in certain situations Signed-off-by:
-
Amitkumar Karwar authored
Some device configuration flags need to be enabled while sending 'bootup params' internal frame to firmware. This patch takes care of it. Signed-off-by:
-
Amitkumar Karwar authored
Firmware's watchdog timer should be disabled as a part of reset sequence. This change fixes a firmware hang issue observed during stress tests. Signed-off-by:
-
Dan Carpenter authored
The issue here is that we allocate "data" and then set "data = PTR_ALIGN(data, 8);" and then we free the aligned pointer instead of the original pointer. kmalloc() pointers are already ARCH_SLAB_MINALIGN aligned which is 8 or more on everything except certain Xtensa variants. We decided that if the Xtensa people ever notice a bug here then we'll tell them the bug is on their side. ;) Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Prameela Rani Garnepudi authored
To support roaming below changes are done: * Station notify frame is send to firmware after sending assoc request. This will avoid dropping of first EAPOL frame due to delay in creation of station control block in firmware. * Data queues are unblocked after sending station notify in open mode, after configuring key in WEP mode, and after receiving EAPOL4 confirm in WPA mode. * Initial EAPOL frames priority is chaged to MGMT, rekey EAPOL frames priority changed to VO. Signed-off-by:
Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by:
-
Prameela Rani Garnepudi authored
80MHz clock for device should be enabled by default in TX command frame radio capabilities. Signed-off-by:
-
Prameela Rani Garnepudi authored
Descriptors preparation is moved to core instead of HAL to avoid synchronization issues in sending TX frames Signed-off-by:
-
Prameela Rani Garnepudi authored
All descriptor structures are in rsi_mgmt.h except this extended descriptor structure. Hence moving it to rsi_mgmt.h and also renaming to rsi_xtend_desc. Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in wiphy_warn warning message text Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Dmitry Lebed authored
DFS offload support implemented: - DFS_OFFLOAD feature is advertised depending on HW capabilities - CAC_STARTED event forwarding from HW implemented - start_radar_detection() callback now returning -ENOTSUPP if DFS_OFFLOAD is enabled Signed-off-by:
Dmitry Lebed <dlebed@quantenna.com> Signed-off-by:
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2018-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi patches for 4.18 * implement Traffic Condition Monitor; * use TCM for scan and BT coex; * use TCM to detect when the AP doesn't support UAPSD properly; * some more work for the 22000 family of devices; * introduce AMSDU rate control offload; * a couple of clean-ups and bugfixes.
-
Roopa Prabhu authored
Fixes: b16fb418 ("net: fib_rules: add extack support") Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Anders Roxell authored
Fixes: 192dc405 ("selftests: net: add tcp_mmap program") Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
-
Colin Ian King authored
Function dca_common_get_tag is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: drivers/dca/dca-core.c:273:4: warning: symbol 'dca_common_get_tag' was not declared. Should it be static? Signed-off-by:
-
- 23 Apr, 2018 15 commits
-
-
David S. Miller authored
David Ahern says: ==================== net/ipv6: couple of fixes for rcu change to from So many details... I am thankful for all the robots running the permutations and tools. Two bug fixes from the rcu change to rt->from: 1. missing rcu lock in ip6_negative_advice 2. rcu dereferences in 2 sites ==================== Signed-off-by: -
David Ahern authored
kbuild test robot reported 2 uses of rt->from not properly accessed using rcu_dereference: 1. add rcu_dereference_protected to rt6_remove_exception_rt and make sure it is always called with rcu lock held. 2. change rt6_do_redirect to take a reference on 'from' when accessed the first time so it can be used the sceond time outside of the lock Fixes: a68886a6 ("net/ipv6: Make from in rt6_info rcu protected") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
syzbot reported a suspicious rcu_dereference_check: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x14a/0x153 kernel/locking/lockdep.c:4592 rt6_check_expired+0x38b/0x3e0 net/ipv6/route.c:410 ip6_negative_advice+0x67/0xc0 net/ipv6/route.c:2204 dst_negative_advice include/net/sock.h:1786 [inline] sock_setsockopt+0x138f/0x1fe0 net/core/sock.c:1051 __sys_setsockopt+0x2df/0x390 net/socket.c:1899 SYSC_setsockopt net/socket.c:1914 [inline] SyS_setsockopt+0x34/0x50 net/socket.c:1911 Add rcu locking around call to rt6_check_expired in ip6_negative_advice. Fixes: a68886a6 ("net/ipv6: Make from in rt6_info rcu protected") Reported-by: syzbot+2422c9e35796659d2273@syzkaller.appspotmail.com Signed-off-by:
-
David S. Miller authored
Denis Bolotin says: ==================== Add configuration information to register dump and debug data The purpose of this patchset is to add configuration information to the debug data collection, which already contains register dump. The first patch (removing the ptt) is essential because it prevents the unnecessary ptt acquirement when calling mcp APIs. ==================== Signed-off-by: -
Denis Bolotin authored
Configuration information is added to the debug data collection, in addition to register dump. Added qed_dbg_nvm_image() that receives an image type, allocates a buffer and reads the image. The images are saved in the buffers and the dump size is updated. Signed-off-by:
Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
-
Denis Bolotin authored
Since nvm images attributes are cached during driver load, acquiring ptt is not needed when calling qed_mcp_get_nvm_image(). Signed-off-by:
-
Jose Abreu authored
Move all the core version detection to a common place ("hwif.c") and implement a table which can be used to lookup the correct callbacks for each IP version. This simplifies the initialization flow of each IP version and eases future implementation of new IP versions. Signed-off-by:Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Heiner Kallweit authored
There's no benefit in using netif_info et al before the net_device has been registered. We get messages like r8169 0000:03:00.0 (unnamed net_device) (uninitialized): [message] Therefore use dev_info/dev_err instead. As a side effect we don't need parameter dev for function rtl8169_get_mac_version() any longer. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Yafang Shao authored
With sk_cookie we can identify a socket, that is very helpful for traceing and statistic, i.e. tcp tracepiont and ebpf. So we'd better init it by default for inet socket. When using it, we just need call atomic64_read(&sk->sk_cookie). Signed-off-by:
Yafang Shao <laoar.shao@gmail.com> Signed-off-by:
-
David S. Miller authored
Roopa Prabhu says: ==================== fib rules extack support First patch refactors code to move fib rule netlink handling into a common function. This became obvious when adding duplicate extack msgs in add and del paths. Second patch adds extack msgs. v2 - Dropped the ip route get support and selftests from the series to look at the input path some more (as pointed out by ido). Will come back to that next week when i have some time. resending just the extack part for now. ==================== Signed-off-by: -
Roopa Prabhu authored
Signed-off-by:
-
Roopa Prabhu authored
This reduces code duplication in the fib rule add and del paths. Get rid of validate_rulemsg. This became obvious when adding duplicate extack support in fib newrule/delrule error paths. Signed-off-by:
-
Roman Mashak authored
Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
-
Yafang Shao authored
tcp_rcv_space_adjust is called every time data is copied to user space, introducing a tcp tracepoint for which could show us when the packet is copied to user. When a tcp packet arrives, tcp_rcv_established() will be called and with the existed tracepoint tcp_probe we could get the time when this packet arrives. Then this packet will be copied to user, and tcp_rcv_space_adjust will be called and with this new introduced tracepoint we could get the time when this packet is copied to user. With these two tracepoints, we could figure out whether the user program processes this packet immediately or there's latency. Hence in the printk message, sk_cookie is printed as a key to relate tcp_rcv_space_adjust with tcp_probe. Maybe we could export sockfd in this new tracepoint as well, then we could relate this new tracepoint with epoll/read/recv* tracepoints, and finally that could show us the whole lifespan of this packet. But we could also implement that with pid as these functions are executed in process context. Signed-off-by:
-
Stephen Hemminger authored
The conversion of rndis friendly name to utf8 uses a standard kernel routine which is optional in config. Therefore build would fail for some configurations. Resolve by selecting needed library. Fixes: 0fe554a4 ("hv_netvsc: propogate Hyper-V friendly name into interface alias") Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
- 21 Apr, 2018 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts were simple overlapping changes in microchip driver. Signed-off-by: -
David S. Miller authored
David Ahern says: ==================== net/ipv6: Another followup to the fib6_info change Last one - for this week. Patches 1, 2 and 7 are more cleanup patches - removing dead code, moving code from a header to near its single caller, and updating function name. Patches 3-5 do some refactoring leading up to patch 6 which fixes a NULL dereference. I have only managed to trigger a panic once, so I can not definitively confirm it addresses the problem but it seems pretty clear that it is a race on removing a 'from' reference on an rt6_info and another path using that 'from' value to do cookie checking. ==================== Signed-off-by:
-
