fixed warning:
* WARNING: min() should probably be min_t(__u32, desc.ld_tgt_count,
LOV_MAX_STRIPE_COUNT)
Signed-off-by: Anil Belur <askb23@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed "WARNING: labels should not be indented"
Signed-off-by: Anil Belur <askb23@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed "ERROR: need consistent spacing around '+' (ctx:WxV)"
Signed-off-by: Anil Belur <askb23@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the sparse warnings in drivers/staging/lustre/lustre/ptlrpc/sec_lproc.c:
sec_lproc.c:58:6: warning: symbol 'sec_flags2str' was not declared. Should it be static?
Signed-off-by: Scott Weir <sjw0410@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Joe Perches mentioned on driverdev-devel that memset after LIBCFS_ALLOC
is not necessary as it is already done during LIBCFS_ALLOC_POST. This
commit removes these unnecessary memsets. Based on the results of running
a cocci patch along the lines of:

@@
expression E1, E2;
@@

LIBCFS_ALLOC (E1,E2);
...
- memset(E1,0,E2);
Signed-off-by: Vitaly Osipov <vitaly.osipov@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch in order to remove 2 lines with spaces at the start of the line.
Signed-off-by: Marc Fite <marc@fite.cat>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following sparse warnings for drivers/staging/lustre/lnet/lnet/router.c:

router.c:139:1: warning: symbol 'lnet_ni_notify_locked' was not declared. Should it be static?
router.c:277:1: warning: symbol 'lnet_add_route_to_rnet' was not declared. Should it be static?
Signed-off-by: John Church <sleeveroller@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Honggang Li <enjoymindful@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Honggang Li <enjoymindful@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Include necessary header files to avoid "should be static" sparse warning
Signed-off-by: Tair Rzayev <tair.rzayev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change style in function headers from 'type * ptr' to 'type *ptr'
Signed-off-by: Jeff Oczek <jeffoczek@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add more descriptive names to function pointers in definition of struct dbll_attrs
Signed-off-by: Jeff Oczek <jeffoczek@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Style-only modifications to make checkpatch.pl -f a bit happier.
Fixes warning: "void function return statements are not generally useful"
Signed-off-by: Radek Dostal <rd@radekdostal.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Style-only modifications to make checkpatch.pl -f a bit happier.
Fixes warning: "Missing a blank line after declarations"
Signed-off-by: Radek Dostal <rd@radekdostal.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add blank line after declarations in eucr_suspend and eucr_resume
as reported by checkpatch.
Signed-off-by: Mathias Engan <mathias.engan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Find_first_zero_bit considers BITS_PER_LONG bits at a time, and thus may
return a larger number than the maximum position argument if that position
is not a multiple of BITS_PER_LONG.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e1,e2,e3;
statement S1,S2;
@@

e1 = find_first_zero_bit(e2,e3)
...
if (e1
- ==
+ >=
  e3)
S1 else S2
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a risk that the variables will be used without being initialized.
Has also improved error handling, after an email proposal from Dan Carpenter.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix a style issue reported by checkpatch.pl for the Eudyptula challenge
Signed-off-by: Wolfgang Ocker <weo@weo1.de>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using an else following a break or return can unnecessarily
indent code blocks.

This patch fixes coding style reported by checkpatch.pl, a part
of eudyptula challenge.
Signed-off-by: Hoang Tran <hoangtran.gwr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The {read,write}[bwl] macros used to access the registers in the ni_atmio,
ni_mio_cs, and ni_pcimio drivers and the included ni_mio_common.c file all
rely on a local variable having a specific name. They also require some of
the ni_mio_common code to need a __maybe_unused tag on the devpriv local
variable.

Remove all the macros by converting them into private functions and storing
the callbacks in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove all the unsed members from the private data for the ni mio drivers.

The ao0p and ao1p members are only used in the ni_ao_reset() function and
the code is commented out. Remove them, and the commented out code, as well.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is used to create the private data structure that is used by
the ni_atmio, ni_mio_cs, and ni_pcimio drivers. These drivers all include
the ni_mio_common.c source to provide most of the driver functionality.

The only driver specific information needed to convert the macro into a
proper struct definition is the MAX_N_CALDACS define. This define is used
to size a couple array members in the struct. The ni_atmio and ni_mio_cs
drivers both define MAX_N_CALDACS as 32. The ni_pcimio driver defines it
as (16+16+2). The ni_mio_common file only uses this define to sanity check
that the struct members are large enough for the number of channels in
the calibration subdevice.

Move the MAX_N_CALDACS define to ni_stc.h and set it to the largest number
of caldacs (34).

The ni_atmio and ni_mio_cs drivers also add one additional member to the
private data struct before using the NI_PRIVATE_COMMON macro.

For the ni_atmio driver, the struct pnp_dev pointer can be saved in the
comedi_device as the 'hw_dev'. The (*detach) of this driver can then use
to_pnp_dev() to get it back when detaching the pnp device.

In the ni_mio_cs driver, the struct pcmia_device pointer is not used so
it can simply be removed.

The NI_PRIVATE_COMMON macro can then be converted into a proper struct
definition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add an (*insn_config) to the counter subdevice to allow the user to select
the clock source for the counters using the INSN_CONFIG_SET_CLOCK_SRC
instruction. The current selection can be queried with the instruction
INSN_CONFIG_GET_CLOCK_SRC.

Also, handle the INSN_CONFIG_RESET instruction to reset all the counters.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The functions pci9111_trigger_source_set(), pci9111_pretrigger_set(),
and pci9111_autoscan_set() are all used to select the A/D trigger type.
They all do a read/mask/set/write of the A/D Trigger Mode Control register.

Simplify the code by removing these helper functions and combining all
the trigger bits so that a single write can be used to set the register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is only used in the pci_device_id table and doesn't add
any additional clarity to the code. Remove the define and just open
code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is only used in a comedi_error() message. The addition of
the driver name to the message is not necessary. Remove the define.

For aesthetics, convert the comedi_error() into a dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Diamond Systems ONYX-MM-DIO board is a PC/104 module with two 8255
chips providing 48 digital I/O channels.

This board can be supported by the pcl724 driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Diamond Systems IR104-PBF board is a PC/104 module with 20
optoisolated inputs and 20 relay outputs.

This board can be supported by the pcl730 driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregk@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These defines don't add any additional clarity to the addi_data drivers.
Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These macros don't add any additional clarity to the addi_data drivers.
Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These defines don't add any additional clarity to the addi_data drivers.
Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These defines don't add any additional clarity to the addi_data drivers.
They are also only used in the addi_apci_3120 driver. Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is not used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member is set but never used. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat the comment describing this comedi driver to use the usual
block comment format.

Also remove reference to digital I/O emulating an 8255, because it
doesn't, and remove "DIO only" from the "Description:" line as it also
supports analog inputs.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup the existing defines and add some missing bit defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not support async commands so the len_chanlist init is
unnecessary. Remove it and allow the core to default the value to '1'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is only used in the comedi_request_region() call to
specify the I/O resource size. Remove it and just open code the
value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is only used during the attach to
determine if there are 8 differential or 16 single-ended analog
inputs. Remove the member and use the comedi_devconfig option
directly.

Also, fix the subdev_flags when differential analog inputs are used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>