- 20 Nov, 2014 13 commits
-
-
Arnd Bergmann authored
Merge tag 'v3.19-rockchip-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "ARM: rockchip: second batch of dts related changes" from Heiko Stuebner: - the dts part of the rk3288 smp support - rate init for rk3288 clocks - enablement of various peripherals - new boardfile for Haoyu Marsboard (rk3066 based) * tag 'v3.19-rockchip-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable PWM on Radxa Rock ARM: dts: rockchip: fix invalid unit-address in rk3188.dtsi ARM: dts: rk3288: add VOP iommu nodes ARM: dts: rockchip: add reset for CPU nodes ARM: dts: rockchip: add intmem node for rk3288 smp support ARM: dts: rockchip: add pmu references to cpus nodes ARM: dts: rockchip: add serial aliases for rk3066 and rk3188 ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066 ARM: dts: rockchip: Add EMAC Rockchip for RK3066 SoCs Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'sunxi-dt-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Pull "Allwinner Device Tree Changes for 3.19" from Maxime Ripard: A lot of things happened during that merge window, but mostly: - Preliminary Support for the A80 - New Boards Support + Mele M3 + Banana Pi + Optimus + OLinuXino Lime2 - Device Tree Relicensing to GPLv2/X11 dual license * tag 'sunxi-dt-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (52 commits) ARM: dts: sun6i: Add ethernet support to M9 board ARM: sun6i: DT: Add PLL6 multiple outputs ARM: dts: sun6i: Add support for the status led ARM: dts: sun6i: Add EHCI support for the M9 board ARM: dts: sunxi: Add regulator-boot-on property to ahci-5v regulator ARM: dts: sun7i: Cubietruck: add power supply regulator for USB OTG VBUS ARM: dts: sun7i: Cubietruck: override regulator pin ARM: sun7i: dtsi: add support for usbphy0 ARM: dtsi: sunxi: add common VBUS regulator ARM: dts: sunxi: Banana Pi: increase startup-delay for the GMAC PHY regulator ARM: dts: sunxi: Use sun4i-a10-apb1-clk for sun6i/sun8i apb2 clocks. ARM: dts: sunxi: unify APB1 clock ARM: dts: sun6i: Re-parent ahb1_mux to pll6 as required by dma controller ARM: sun5i: olinuxino: Relicense the device tree under GPLv2/X11 ARM: sun4i: cubieboard: Relicense the device tree under GPLv2/X11 ARM: sun7i: pcduino3: Relicense the device tree under GPLv2/X11 ARM: sun4i: pcduino: Relicense the device tree under GPLv2/X11 ARM: sun7i: olinuxino lime: Relicense the device tree under GPLv2/X11 ARM: dts: sun9i: Enable uart4 for A80 Optimus board ARM: dts: sun9i: Add uart4 pinmux setting for A80 SoC ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
https://github.com/carlocaione/linux-mesonArnd Bergmann authored
Pull "ARM: meson: DTS related changes" from Carlo Caione: here is the pull request for the DT related changes for the 3.19. It's mainly the work done by Beniamino for the preliminary support of the Amlogic Meson8 SoC, the support for L2 cache and the I2C controller. Please note that the support for the Tronsmart S89 Elite TV box has not been included since the Meson8 development will be done now on a different dev board kindly provided by Amlogic. * tag 'v3.19-meson-dts' of https://github.com/carlocaione/linux-meson: ARM: dts: meson: add I2C controller nodes ARM: meson: DTS: enable L2 cache ARM: dts: add dtsi for Amlogic Meson8 SoCs DTS: meson: Add forgotten compatible in board DTS Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
git://git.stlinux.com/devel/kernel/linux-stiArnd Bergmann authored
Pull "STi DT updates for v3.19, round 2" from Maxime Coquelin: Highlights: ----------- - Refactor STiH407 SoC and board to add STiH410 SoC support - Add USB support to STiH416 SoC * tag 'sti-dt-for-v3.19-2' of git://git.stlinux.com/devel/kernel/linux-sti: ARM: STi: DT: STiH416: Change miphy356 node name to phy@fe382000 ARM: STi: DT: STih407: STih410: Add clk_ignore_unused to kernel bootargs ARM: STi: DT: STiH410: Add STiH410 SoC and b2120 board support. ARM: STi: DT: STih407: Abstract common dt nodes into shared files. ARM: STi: DT: STiH410: Add pinctl config for usb controllers. ARM: STi: DT: STiH410: Add defines for STiH410 DT clocks ARM: STi: DT: STiH416: Add DT nodes for the ehci and ohci usb controllers. ARM: STi: DT: STiH416: Add DT node for the stih415/6 usb2 phy ARM: STi: DT: STiH416: Add pinctl setup for usb controllers. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
https://github.com/mbgg/linux-mediatekArnd Bergmann authored
Pull "Add support for mt6592, mt8127 and mt8135 Socs from Mediatek" from Matthias Brugger: Here comes the pull request which introduces basic support for Mediatek SoCs mt6592, mt8127 and mt8135. The patches for the mt81xx got merged in the late tree for v3.18 but were not be merged at the end. They got a small fix regarding the compatible and model string in the dts files. * tag 'v3.19-next-dts' of https://github.com/mbgg/linux-mediatek: dt-bindings: add documentation for Mediatek SoC ARM: mediatek: add dts for mt6592-evb ARM: mediatek: Add basic support for mt6592 dt-bindings: add more chips in documentation for Mediatek SoC ARM: dts: Build dtb for mt8127 & mt8135 ARM: mediatek: add dts for MT8135 evaluation board. ARM: mediatek: Add basic support for mt8135 ARM: mediatek: add dts for 8127 Moose board ARM: mediatek: Add basic support for mt8127 Signed-off-by; Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt Pull "Keystone dts updates for 3.19" from Santosh Shilimkar: - PCIE controller related updates - 1GBe phy related upates * tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone-k2e: add DT bindings for PCI controller for port 1 ARM: dts: keystone: add DT bindings for PCI controller for port 0 ARM: dts: k2l-evm: add 1g ethernet phys nodes ARM: dts: k2e-evm: add 1g ethernet phys nodes Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
http://github.com/brcm/linuxArnd Bergmann authored
Pull "Broadcom Cygnus SoC Device Tree changes" from Florian Fainelli: This pull request contains the Broadcom Cygnus Device Tree changes: - binding documentation for the SoC and clock - cygnus SoC and clock dtsi files - DTS for Cygnus Entreprise phone, BCM911360K and BCM958300K * tag 'arm-soc/for-3.19/cygnus-dts-v2' of http://github.com/brcm/linux: ARM: dts: Enable Broadcom Cygnus SoC dt-bindings: Document Broadcom Cygnus SoC and clocks [arnd: something went wrong here, we already had pulled an earlier version of the same patches, which had the wrong license statement. I've pulled this one over the old pull request and fixed up the conflicts now] Conflicts: arch/arm/boot/dts/bcm-cygnus-clock.dtsi arch/arm/boot/dts/bcm-cygnus.dtsi arch/arm/boot/dts/bcm911360_entphn.dts arch/arm/boot/dts/bcm911360k.dts arch/arm/boot/dts/bcm958300k.dts Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Darshana Padmadas authored
This patch corrects the vendor-prefix for isl29028 in the compatible property from "isil,isl29028" to "isl,isl29028" according to listed vendor-prefixes in Documentation/devicetree/bindings/vendor-prefixes.txt. Incorrect vendor-prefix "isl" was reported by checkpatch.pl warning for drivers/staging/iio/light/isl29028.c. Thus incorrect vendor-prefix "isil" was corrected for every mention of device isl29028. Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Darshana Padmadas authored
This patch adds the correct vendor-prefix for device isl29028 and maintains deprecated vendor-prefix found by checkpatch warning for older kernel releases. Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Darshana Padmadas authored
This patch documents deprecated vendor name "isil" to fix warning of undocumented string for device isl29028 as reported while running checkpatch.pl on drivers/staging/iio/light/isl29028.c. This is done to maintain compatibility with older kernels. Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Darshana Padmadas authored
This patch documents the device isl29028 with its vendor-prefix. Undocumented deprecated vendor-prefix found by checkpatch also documented for compatibility reasons. Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Matthias Klein authored
The model B and B+ differ in the GPIO lines for ACT and PWR leds, and the I2S interface. Signed-off-by: Matthias Klein <matthias.klein@linux.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'omap-for-v3.19/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "Device tree related changes for omaps" from Tony Lindgren: - Fix currently harmless but wrong sizes for various GPMC connected devices - Set up timings for several GPMC connected devices to get rid of bootloader dependencies in later patches - Enable various drivers for dra7xx - Prepare Igep boards to support new variants - Add intial support for BeagleBoard-X15 * tag 'omap-for-v3.19/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (37 commits) ARM: dts: DRA7: Add aliases for all serial ports ARM: dts: Add am57xx-beagle-x15 ARM: OMAP2+: igep00x0: Add pdata-quirks for the btwilink device. ARM: dts: omap3-igep00x0: Remove i2c2 node. ARM: dts: omap3-igep0020-rev-f: Support IGEPv2 Rev. F ARM: dts: omap3-igep0020-common: Introduce igep0020 common dtsi file. ARM: dts: omap3-igep0030-rev-g: Support IGEP COM MODULE Rev. G ARM: dts: omap3-igep0030-common: Introduce igep0030 common dtsi file. ARM: dts: omap3-igep00x0: Move outside common file the on board Wifi module. ARM: dts: omap3-igep0020: Specify IGEPv2 revision in device tree. ARM: dts: omap3-igep0030: Specify IGEP COM revision in device tree. ARM: dts: omap3-igep00x0: Move NAND configuration to a common place. ARM: dts: omap3-igep00x0: Fix UART2 pins that aren't common. ARM: dts: dra7: add labels to DWC3 nodes ARM: dts: dra72x-evm: Enable CPSW and MDIO ARM: dts: dra7-evm: Keep all VDD rails always-on ARM: dts: dra72-evm: Add MMC nodes ARM: dts: dra72-evm: Add power button node ARM: dts: dra72-evm: Provide explicit pinmux for TPS PMIC ARM: dts: dra72-evm: Add regulator information to USB2 PHYs ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 19 Nov, 2014 6 commits
-
-
git://git.infradead.org/linux-mvebuArnd Bergmann authored
Pull "mvebu DT changes for v3.19" from Jason Cooper: - mvebu - ReadyNAS 102 leds, esata - ReadyNAS 2120 esata - Add cache-unified for Aurora L2 node - Add ref clk for timer and watchdog on Armada 375 - Cleanup Armada XP pinctrl for GigE - Add RGMII pinctrl, i2c eeprom, and fix 74hc595 counter on Lenovo ix4-300d - kirkwood - Add DLink DIR665 and it's DSA configuration * tag 'mvebu-dt-3.19' of git://git.infradead.org/linux-mvebu: ARM: mvebu: armada-xp: Fix 74hc595 count for Lenovo ix4-300d ARM: mvebu: armada-xp: Add I2C eeprom on Lenovo ix4-300d ARM: mvebu: armada-xp: Add RGMII pinctrl to Lenovo ix4-300d ARM: mvebu: armada-xp: Add GE0 pinctrl settings for GMII ARM: mvebu: armada-xp: Move GE0/1 pinctrl settings for RGMII ARM: mvebu: armada-xp: Use pinctrl node alias ARM: mvebu: armada-xp: Add node alias to pinctrl and add base address ARM: mvebu: armada-xp: Consolidate pinctrl node ARM: Kirkwood: DIR665: Instantiate Distributed Switch Architecture ARM: Kirkwood: Add support for DLink DIR665 ARM: mvebu: Enable rear eSATA ports of NETGEAR ReadyNAS 2120 ARM: mvebu: Enable the reference clock for timer and watchdog on Armada 375 SoC arm: mvebu: Clarify (e)SATA ports info in NETGEAR ReadyNAS 102 .dts file arm: mvebu: Fix LED color in NETGEAR ReadyNAS 102 .dts file ARM: mvebu: Fix the Aurora L2 cache node with the required cache-unified property Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
git://github.com/hisilicon/linux-hisiArnd Bergmann authored
Pull "ARM: DT: Hisilicon terminal SoC HiX5HD2 DT updates for 3.19" from Wei Xu: - Add reboot node, reusing syscon-reboot - Add I2C nodes Hisilicon IP - Add IR node based on Hisilicon IP - Add Watchdog node based on ARM IP - Add GPIO nodes based on ARM GPIO IP - Add SATA node based on Hisilicon IP - Add USB nodes - Add MMC nodes based on Synopsys IP - Add GMAC nodes based on Hisilicon IP * tag 'hix5hd2-dt-for-3.19' of git://github.com/hisilicon/linux-hisi: ARM: dts: hix5hd2: add reboot node ARM: dts: hix5hd2: add i2c node ARM: dts: hix5hd2: add ir node ARM: dts: hix5hd2: add wdg node ARM: dts: hix5hd2: add gpio node ARM: dts: hix5hd2: add sata node ARM: dts: hix5hd2: add usb node ARM: dts: hix5hd2: add mmc node ARM: dts: hix5hd2: add gmac node Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'renesas-dt-cleanups3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Third Round of Renesas ARM Based SoC DT Cleanups for v3.19" from Simon Horman: * Use keyboard as gpio-keys node name * tag 'renesas-dt-cleanups3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: kzm9g-reference: Use keyboard as gpio-keys node name ARM: shmobile: koelsch: Use keyboard as gpio-keys node name ARM: shmobile: lager: Use keyboard as gpio-keys node name ARM: shmobile: armadillo800eva: Use keyboard as gpio-keys node name Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'renesas-dt-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Second Round of Renesas ARM Based SoC DT Cleanups for v3.19" from Simon Horman: * Drop console= bootargs parameter on alt * Correct scifb* naming on r8a73a4 * Drop 0x unit-address prefixes * Remove unnecessary MMC options * tag 'renesas-dt-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: alt dts: Drop console= bootargs parameter ARM: shmobile: r8a73a4: fix scifb* naming ARM: shmobile: kzm9g-reference dts: Drop bogus 0x unit-address prefix ARM: shmobile: r8a7791 dtsi: Drop bogus 0x unit-address prefix ARM: shmobile: r8a7790 dtsi: Drop bogus 0x unit-address prefix ARM: shmobile: r8a7790 dtsi: Remove unnecessary MMC options ARM: shmobile: r8a7779 dtsi: Remove unnecessary MMC options ARM: shmobile: r8a7778 dtsi: Remove unnecessary MMC options Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'renesas-dt-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Renesas ARM Based SoC DT Updates for v3.19" from Simon Horman: * Add Add SoC-specific SATA compatible property to r8a7779 * Enable DMA for MMCIF on r8a7791 and r8a7790 * Enable USB-PHY, HS-USB and USB3.0 on r8a7791 and r8a7790 * Enable TMU timer via DT on r8a7778 * Enable CMT timer via DT on r8a73a4 * Add MMP and {SR}GX clocks to r8a7791 and r8a7790 * Correct scifa2 clock index on r8a7740 * Add missing INTCA for irqpin on r8a7740 * tag 'renesas-dt-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (34 commits) ARM: shmobile: r8a7779 dtsi: Add SoC-specific SATA compatible property ARM: shmobile: r8a7791: Reference DMA channels in MMCIF DT node ARM: shmobile: r8a7790: Reference DMA channels in MMCIF DT nodes ARM: shmobile: r8a7791: Add MMCIF0 DT node ARM: shmobile: r8a7790: Rename mmcif node to mmc ARM: shmobile: r8a7778: Add SoC-specific TMU compatible property ARM: shmobile: r8a73a4: Add SoC-specific CMT compatible property ARM: shmobile: henninger: enable HS-USB ARM: shmobile: koelsch: enable HS-USB ARM: shmobile: r8a7791: add HS-USB device node ARM: shmobile: lager: enable HS-USB ARM: shmobile: r8a7790: add HS-USB device node ARM: shmobile: r8a7791: add USB3.0 device node ARM: shmobile: lager: enable USB3.0 ARM: shmobile: r8a7790: add USB3.0 device node ARM: shmobile: r8a7794: Add arch_timer to device tree ARM: shmobile: bockw-reference: Initialise TMU device using DT ARM: shmobile: r8a7778: Add TMU nodes ARM: shmobile: armadillo800eva dts: Enable TMU0 ARM: shmobile: r8a7740 dtsi: Add TMU0 and TMU1 device nodes ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
This is a base for the DT updates, merged through the arm-soc cleanup branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 18 Nov, 2014 13 commits
-
-
Beniamino Galvani authored
Add nodes for I2C controllers A,B,AO, which are available in both Meson6 and Meson8. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Carlo Caione <carlo@caione.org>
-
Beniamino Galvani authored
This enables the L2 cache controller available in Amlogic SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Carlo Caione <carlo@caione.org>
-
Beniamino Galvani authored
This adds a dtsi for Amlogic Meson8 SoCs. It differs from the Meson6 dtsi for the number of Cortex-A9 cores (4 vs 2) and for the frequency of clk81. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Carlo Caione <carlo@caione.org>
-
Carlo Caione authored
The board DTS is missing the machine compatible. Signed-off-by: Carlo Caione <carlo@caione.org>
-
Peter Griffin authored
Following Arnds review comments, update the miphy365 to follow the common convention of naming the phy node names as phy@addr. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
-
Peter Griffin authored
At the moment we don't take a reference on some core interconnect clocks which means when CCF turns off unused clocks the SoC will hang. As a temp soltuion we will boot with clk_ignore_unused parameter for all b2120 boards. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
-
Peter Griffin authored
The STiH410 is an advanced multi-HD AVC processor with 3D graphics acceleration and 1.5-GHz ARM Cortex-A9 SMP CPU part of the stih407 family. It has wide connectivity including USB 3.0, PCI-e, SATA and gigabit ethernet. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
-
Peter Griffin authored
The stih410 soc which will be added in the following commit is very similar to the stih407, to enable maximum re-use of the dt files this commit abstracts the common parts into a shared dt file stihxxx-b2120 for the board, and also a shared file stih407-family.dtsi for the SoC. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
-
Peter Griffin authored
This patch adds the required pin configiguration for the extra usb controllers found on the stih410 device. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
-
Peter Griffin authored
Although most clock outputs are the same as stih407 SoC, stih410 also has some additional new clock outputs. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
-
Peter Griffin authored
This patch adds the DT nodes for the 4 usb ehci and ohci usb controllers on the stih416 SoC. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
-
Peter Griffin authored
This usb picophy is found on stih415/6 SoC. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
-
Peter Griffin authored
This patch adds the required pin config for all usb controllers on the stih416. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
-
- 17 Nov, 2014 3 commits
-
-
Hans de Goede authored
The Mele M9 has an ethernet board, enable it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
PLL6 on sun6i has multiple outputs, just like the other sunxi platforms. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Maxime Ripard authored
-
- 15 Nov, 2014 1 commit
-
-
Julien CHAUVEAU authored
This enables user space access to the 3 PWM available on the Radxa Rock headers. Signed-off-by: Julien CHAUVEAU <julien.chauveau@neo-technologies.fr> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
-
- 14 Nov, 2014 4 commits
-
-
Howard Chen authored
This adds a DT binding documentation for the MT6592 SoC from Mediatek. Signed-off-by: Howard Chen <ibanezchen@gmail.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-
Howard Chen authored
The mt6592-evb is an evaluation board based on the MT6592 SoC. Signed-off-by: Howard Chen <ibanezchen@gmail.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-
Howard Chen authored
* A dtsi for boards based on Mediatek MT6592 SoCs * Compatible string in arch/arm/mach-mediatek/mediatek.c Signed-off-by: Howard Chen <ibanezchen@gmail.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-
Joe.C authored
Add MT8127 & MT8135 from Mediatek. Signed-off-by: Joe.C <yingjoe.chen@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-