1. 13 Mar, 2016 4 commits
  2. 08 Mar, 2016 2 commits
  3. 02 Mar, 2016 11 commits
  4. 01 Mar, 2016 12 commits
  5. 29 Feb, 2016 9 commits
    • Vignesh R's avatar
      ARM: dts: DRA7: Add dt nodes for PWMSS · 5fcc6730
      Vignesh R authored
      Add PWMSS device tree nodes for DRA7 SoC family and add documentation
      for dt bindings.
      Signed-off-by: default avatarVignesh R <vigneshr@ti.com>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      5fcc6730
    • Vignesh R's avatar
      ARM: dts: DRA7: Add TBCLK for PWMSS · c60f9e29
      Vignesh R authored
      tbclk is used by ehrpwm to generate PWM waveform on DRA7 SoC. Add Linux
      clock to control ehrpwm tbclk.
      The TRM says, tbclk is derived from SYSCLKOUT. SYSCLKOUT is nothing but
      ehrpwm functional clock derived from the gateable interface and
      functional clock of PWMSS(l4_root_clk_div).
      Refer AM57x TRM SPRUHZ6[1], October 2014, Table 29-4 and Section 29.2.2.1,
      Table 29-19 and the NOTE at the end of the table.
      
      [1] www.ti.com/lit/ug/spruhz6/spruhz6.pdf
      Signed-off-by: default avatarVignesh R <vigneshr@ti.com>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      c60f9e29
    • Arnd Bergmann's avatar
      Merge tag 'pxa-dt-4.6' of https://github.com/rjarzmik/linux into next/dt · 53b28f1c
      Arnd Bergmann authored
      Merge pxa dt for v4.6 from Robert Jarzmik:
      
      This device-tree pxa update brings :
       - a single fix for nand dmaengine node
      
      * tag 'pxa-dt-4.6' of https://github.com/rjarzmik/linux:
        ARM: dts: pxa: fix dma engine node to pxa3xx-nand
      53b28f1c
    • Arnd Bergmann's avatar
      Merge tag 'sunxi-dt-for-4.6' of... · 8898cb41
      Arnd Bergmann authored
      Merge tag 'sunxi-dt-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt
      
      Merge "Allwinner DT Additions for 4.6" from Maxime Ripard:
      
      Quite a few changes, among which:
        - Support for the A83t
        - Support for the eMMC DDR on a few boards
        - Support for the OTG controller on a few boards
        - New boards: Itead Ibox, Cubietruck plus, Homlet v2, Lamobo R1
      
      * tag 'sunxi-dt-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (34 commits)
        ARM: dts: sun8i: Add leds and switch on Orangepi Plus boards
        ARM: dts: sun8i: Add ir receiver nodes to H3 dtsi
        ARM: dts: sun8i-h3: Add R_PIO controller node to the dtsi
        dts: sun8i-h3: Add APB0 related clocks and resets
        ARM: dts: sun7i: Add dts file for the lamobo-r1 board
        ARM: dts: sun4i: Enable USB DRC on Hyundai-a7hd
        ARM: dts: sun4i: Enable USB DRC on the MK802
        ARM: dts: sun8i: q8-common: Add AXP223 PMIC device and regulator nodes
        ARM: dts: sun8i: sinlinx-sina33: Add AXP223 PMIC device and regulator nodes
        ARM: dts: sun7i: Enable USB DRC on Olimex A20 EVB
        ARM: dts: sun7i: Enable USB DRC on MK808C
        ARM: dts: sunxi: Fix #interrupt-cells for PIO in H3
        ARM: dts: sun8i-a83t: Correct low speed oscillator clocks
        ARM: dts: sun9i: a80-optimus: Remove i2c3 and uart4
        ARM: dts: sun4i: Itead Iteaduino to use common code
        ARM: dts: sun7i: Add Itead Ibox support
        ARM: dts: sunxi: Add sunxi-itead-core-common.dtsi
        ARM: dts: sun9i: cubieboard4: Enable hardware reset and HS-DDR for eMMC
        ARM: dts: sun9i: a80-optimus: Enable hardware reset and HS-DDR for eMMC
        ARM: dts: sun9i: Include SDC2_RST pin in mmc2_8bit_pins
        ...
      8898cb41
    • Lokesh Vutla's avatar
      ARM: dts: DRA7: change address-cells and size-cells · dae320ec
      Lokesh Vutla authored
      DRA7 SoC has the capability to support DDR memory upto 4GB. In order to
      represent this in memory dt node, the address-cells and size cells
      should be 2. So, changing the address-cells and size-cells to 2 and
      updating the memory nodes accordingly.
      Signed-off-by: default avatarLokesh Vutla <lokeshvutla@ti.com>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      dae320ec
    • Arnd Bergmann's avatar
      Merge tag 'mvebu-dt-4.6-2' of git://git.infradead.org/linux-mvebu into next/dt · eff01adb
      Arnd Bergmann authored
      Merge "mvebu dt for 4.6 (part 2)" from Gregory CLEMENT:
      
      - Reorder Ethernet node on Armada 38x SoCs
      - Add device tree for buffalo linkstation ls-gl
      - Use the more accurate armada-370-sata string for SATA on Armada 375
      - Add NAND description to Armada 370 DB and Armada XP DB
      
      * tag 'mvebu-dt-4.6-2' of git://git.infradead.org/linux-mvebu:
        ARM: dts: mvebu: add NAND description to Armada 370 DB and Armada XP DB
        ARM: dts: armada-375: use armada-370-sata for SATA
        ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl
        ARM: dts: orion5x: split linkstation lswtgl into common and device parts
        ARM: dts: armada-38x: add reference to ETH connectors for A385-AP
        ARM: dts: armada-38x: change order of ethernet DT nodes on Armada 38x
        ARM: dts: orion5x: fix the missing mtd flash on linkstation lswtgl
        ARM: dts: kirkwood: use unique machine name for ds112
      eff01adb
    • Paul Kocialkowski's avatar
      ARM: dts: omap3-sniper: USB OTG support · 4d91e285
      Paul Kocialkowski authored
      This adds support for USB OTG on the Optimus Black.
      The HSUSB0 interface is connected to the TWL4030 USB PHY.
      Signed-off-by: default avatarPaul Kocialkowski <contact@paulk.fr>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      4d91e285
    • Paul Kocialkowski's avatar
      ARM: dts: LG Optimus Black codename sniper basic support · 999400d4
      Paul Kocialkowski authored
      The LG Optimus Black codename sniper is a smartphone that was designed and
      manufactured by LG Electronics (LGE) and released back in 2011.
      It is using an OMAP3630 SoC, GP version.
      
      This adds devicetree support for the device, with only a few basic features
      supported, such as debug uart, i2c, internal emmc and external mmc.
      Signed-off-by: default avatarPaul Kocialkowski <contact@paulk.fr>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      999400d4
    • Arnd Bergmann's avatar
      Merge tag 'renesas-dt2-for-v4.6' of... · ca2942cc
      Arnd Bergmann authored
      Merge tag 'renesas-dt2-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
      
      Merge "Second Round of Renesas ARM Based SoC DT Updates for v4.6" from
      Simon Horman:
      
      * Add L2 cache-controller nodes to r8a779[0134] and r8a73a4
      * Add etheravb support to r8a7794
      * Correct JP3 jumper description on Porter
      * Enable thermal zone on  r8a779[013]
      * Replace gpio-key, wakeup with wakeup-source property on r8a7794
      * Use demuxer for IIC0/I2C0 on lager
      * Use fallback etheravb, pci and pcie compatibility strings as appropriate
      
      * tag 'renesas-dt2-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
        ARM: dts: r8a7790: use fallback etheravb compatibility string
        ARM: dts: r8a7790: lager: use demuxer for IIC0/I2C0
        ARM: dts: r8a7794: add EtherAVB support
        ARM: dts: r8a7794: add EtherAVB clock
        ARM: dts: r8a7794: replace gpio-key, wakeup with wakeup-source property
        ARM: dts: r8a7794: Add L2 cache-controller node
        ARM: dts: r8a7793: Add L2 cache-controller node
        ARM: dts: r8a7791: Add L2 cache-controller node
        ARM: dts: r8a7790: Add L2 cache-controller nodes
        ARM: dts: r8a73a4: Add L2 cache-controller nodes
        ARM: dts: r8a7793: enable to use thermal-zone
        ARM: dts: r8a7791: enable to use thermal-zone
        ARM: dts: r8a7790: enable to use thermal-zone
        ARM: dts: porter: fix JP3 jumper description
        ARM: dts: r8a7794: use fallback pci compatibility string
        ARM: dts: r8a7791: use fallback pci compatibility string
        ARM: dts: r8a7790: use fallback pci compatibility string
        ARM: dts: r8a7791: use fallback pcie compatibility string
        ARM: dts: r8a7790: use fallback pcie compatibility string
      ca2942cc
  6. 28 Feb, 2016 1 commit
  7. 26 Feb, 2016 1 commit
    • Robert Jarzmik's avatar
      ARM: dts: pxa: fix dma engine node to pxa3xx-nand · 07c6b2d0
      Robert Jarzmik authored
      Since the switch from mmp_pdma to pxa_dma driver for pxa architectures,
      the pxa_dma requires 2 arguments, namely the requestor line and the
      requested priority.
      
      Fix the only left device node which was still passing only one argument,
      making the pxa3xx-nand driver misbehave in a device-tree configuration,
      ie. failing all data transfers.
      
      Fixes: c943646d ("ARM: dts: pxa: add dma engine node to pxa3xx-nand")
      Signed-off-by: default avatarRobert Jarzmik <robert.jarzmik@free.fr>
      07c6b2d0