- 01 Mar, 2012 14 commits
-
-
Trond Myklebust authored
commit b9f9a031 upstream. To ensure that we don't just reuse the bad delegation when we attempt to recover the nfs4_state that received the bad stateid error. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Rudholm authored
commit 4d6144de upstream. If the read or write buffer size associated with the command sent through the mmc_blk_ioctl is zero, do not prepare data buffer. This enables a ioctl(2) call to for instance send a MMC_SWITCH to set a byte in the ext_csd. Signed-off-by:
Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by:
Chris Ball <cjb@laptop.org> Signed-off-by:
-
Takashi Iwai authored
[Note that since the patch isn't applicable (and unnecessary) to 3.3-rc, there is no corresponding upstream fix.] The cx5051 parser calls snd_hda_input_jack_add() in the init callback to create and initialize the jack detection instances. Since the init callback is called at each time when the device gets woken up after suspend or power-saving mode, the duplicated instances are accumulated at each call. This ends up with the kernel warnings with the too large array size. The fix is simply to move the calls of snd_hda_input_jack_add() into the parser section instead of the init callback. The fix is needed only up to 3.2 kernel, since the HD-audio jack layer was redesigned in the 3.3 kernel. Reported-by:
Russell King <rmk+kernel@arm.linux.org.uk> Tested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Tyler Hicks authored
commit 545d6809 upstream. After passing through a ->setxattr() call, eCryptfs needs to copy the inode attributes from the lower inode to the eCryptfs inode, as they may have changed in the lower filesystem's ->setxattr() path. One example is if an extended attribute containing a POSIX Access Control List is being set. The new ACL may cause the lower filesystem to modify the mode of the lower inode and the eCryptfs inode would need to be updated to reflect the new mode. https://launchpad.net/bugs/926292Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Reported-by:
Sebastien Bacher <seb128@ubuntu.com> Cc: John Johansen <john.johansen@canonical.com> Signed-off-by:
-
Tim Gardner authored
commit 72ba009b upstream. BugLink: http://bugs.launchpad.net/bugs/900802Signed-off-by:
Till Kamppeter <till.kamppeter@gmail.com> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
commit b57e6b56 upstream. read_lock(&tpt_trig->trig.leddev_list_lock) is accessed via the path ieee80211_open (->) ieee80211_do_open (->) ieee80211_mod_tpt_led_trig (->) ieee80211_start_tpt_led_trig (->) tpt_trig_timer before initializing it. the intilization of this read/write lock happens via the path ieee80211_led_init (->) led_trigger_register, but we are doing 'ieee80211_led_init' after 'ieeee80211_if_add' where we register netdev_ops. so we access leddev_list_lock before initializing it and causes the following bug in chrome laptops with AR928X cards with the following script while true do sudo modprobe -v ath9k sleep 3 sudo modprobe -r ath9k sleep 3 done BUG: rwlock bad magic on CPU#1, wpa_supplicant/358, f5b9eccc Pid: 358, comm: wpa_supplicant Not tainted 3.0.13 #1 Call Trace: [<8137b9df>] rwlock_bug+0x3d/0x47 [<81179830>] do_raw_read_lock+0x19/0x29 [<8137f063>] _raw_read_lock+0xd/0xf [<f9081957>] tpt_trig_timer+0xc3/0x145 [mac80211] [<f9081f3a>] ieee80211_mod_tpt_led_trig+0x152/0x174 [mac80211] [<f9076a3f>] ieee80211_do_open+0x11e/0x42e [mac80211] [<f9075390>] ? ieee80211_check_concurrent_iface+0x26/0x13c [mac80211] [<f9076d97>] ieee80211_open+0x48/0x4c [mac80211] [<812dbed8>] __dev_open+0x82/0xab [<812dc0c9>] __dev_change_flags+0x9c/0x113 [<812dc1ae>] dev_change_flags+0x18/0x44 [<8132144f>] devinet_ioctl+0x243/0x51a [<81321ba9>] inet_ioctl+0x93/0xac [<812cc951>] sock_ioctl+0x1c6/0x1ea [<812cc78b>] ? might_fault+0x20/0x20 [<810b1ebb>] do_vfs_ioctl+0x46e/0x4a2 [<810a6ebb>] ? fget_light+0x2f/0x70 [<812ce549>] ? sys_recvmsg+0x3e/0x48 [<810b1f35>] sys_ioctl+0x46/0x69 [<8137fa77>] sysenter_do_call+0x12/0x2 Cc: Gary Morain <gmorain@google.com> Cc: Paul Stewart <pstew@google.com> Cc: Abhijit Pradhan <abhijit@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Acked-by:
Johannes Berg <johannes.berg@intel.com> Tested-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Yinghai Lu authored
commit 71f6bd4a upstream. Fixes PCI device detection on IBM xSeries IBM 3850 M2 / x3950 M2 when using ACPI resources (_CRS). This is default, a manual workaround (without this patch) would be pci=nocrs boot param. V2: Add dev_warn if the workaround is hit. This should reveal how common such setups are (via google) and point to possible problems if things are still not working as expected. -> Suggested by Jan Beulich. Tested-by: garyhade@us.ibm.com Signed-off-by:
Yinghai Lu <yinghai.lu@oracle.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Alex Deucher authored
commit b7f5b7de upstream. MSI_REARM_EN register is a write only trigger register. There is no need RMW when re-arming. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=41668Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Anton Blanchard authored
commit 9a45a940 upstream. perf on POWER stopped working after commit e050e3f0 (perf: Fix broken interrupt rate throttling). That patch exposed a bug in the POWER perf_events code. Since the PMCs count upwards and take an exception when the top bit is set, we want to write 0x80000000 - left in power_pmu_start. We were instead programming in left which effectively disables the counter until we eventually hit 0x80000000. This could take seconds or longer. With the patch applied I get the expected number of samples: SAMPLE events: 9948 Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Guenter Roeck authored
commit 363434b5 upstream. An error while creating sysfs attribute files in the driver's probe function results in an error abort, but already created files are not removed. This patch fixes the problem. Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Cc: Dirk Eibach <eibach@gdsys.de> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Chris D Schimp authored
commit 2f2da1ac upstream. Initialize PPR register for both channels, and set correct PPR register bits. Also remove unnecessary variable initializations. Signed-off-by:
Chris D Schimp <silverchris@gmail.com> [guenter.roeck@ericsson.com: Merged two patches into one] Signed-off-by:
Roland Stigge <stigge@antcom.de> Signed-off-by:
-
Chris D Schimp authored
commit b63d97a3 upstream. RPM calculation from tachometer value does not depend on PPR. Also, do not report negative RPM values. Signed-off-by:
-
David Howells authored
commit 918e556e upstream. Lock i_mmap_mutex for access to the VMA prio list to prevent concurrent access. Currently, certain parts of the mmap handling are protected by the region mutex, but not all. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mark Brown authored
commit 31794bc3 upstream. The sidetone enumeration texts have left and right swapped. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
- 20 Feb, 2012 17 commits
-
-
Greg Kroah-Hartman authored
-
Alexey Dobriyan authored
commit f2ea0f5f upstream. Use standard ror64() instead of hand-written. There is no standard ror64, so create it. The difference is shift value being "unsigned int" instead of uint64_t (for which there is no reason). gcc starts to emit native ROR instructions which it doesn't do for some reason currently. This should make the code faster. Patch survives in-tree crypto test and ping flood with hmac(sha512) on. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Dumazet authored
commit 73736e03 upstream. Zhihua Che reported a possible memleak in slub allocator on CONFIG_PREEMPT=y builds. It is possible current thread migrates right before disabling irqs in __slab_alloc(). We must check again c->freelist, and perform a normal allocation instead of scratching c->freelist. Many thanks to Zhihua Che for spotting this bug, introduced in 2.6.39 V2: Its also possible an IRQ freed one (or several) object(s) and populated c->freelist, so its not a CONFIG_PREEMPT only problem. Reported-by:
Zhihua Che <zhihua.che@gmail.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Stefano Stabellini authored
commit 207d543f upstream. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Daniel T Chen authored
commit 27c3afe6 upstream. BugLink: https://bugs.launchpad.net/bugs/930842 The reporter states that audio is inaudible by default without muting 'External Amplifier'. Add a quirk to handle his SSID so that changing the control is not necessary. Reported-and-tested-by:
Benjamin Carlson <elderbubba0810@gmail.com> Signed-off-by:
Daniel T Chen <crimsun@ubuntu.com> Signed-off-by:
-
Herbert Xu authored
commit 3a92d687 upstream. Unfortunately in reducing W from 80 to 16 we ended up unrolling the loop twice. As gcc has issues dealing with 64-bit ops on i386 this means that we end up using even more stack space (>1K). This patch solves the W reduction by moving LOAD_OP/BLEND_OP into the loop itself, thus avoiding the need to duplicate it. While the stack space still isn't great (>0.5K) it is at least in the same ball park as the amount of stack used for our C sha1 implementation. Note that this patch basically reverts to the original code so the diff looks bigger than it really is. Signed-off-by:
-
Herbert Xu authored
commit 58d7d18b upstream. The previous patch used the modulus operator over a power of 2 unnecessarily which may produce suboptimal binary code. This patch changes changes them to binary ands instead. Signed-off-by:
-
Nikolaus Schulz authored
commit 09e87e5c upstream. In order to enable temperature mode aka automatic mode for the F75373 and F75375 chips, the two FANx_MODE bits in the fan configuration register need be set to 01, not 10. Signed-off-by:
Nikolaus Schulz <mail@microschulz.de> Signed-off-by:
-
David Jander authored
commit 6dd599f8 upstream. When using nested threaded irqs, use handle_nested_irq(). This function does not call the chip handler, so no handler is set. Signed-off-by:
David Jander <david@protonic.nl> Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Yong Zhang <yong.zhang0@gmail.com> Cc: Manfred Gruber <m.gruber@unverspurt.at> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Wu Fengguang authored
commit 977b7e3a upstream. When a SD card is hot removed without umount, del_gendisk() will call bdi_unregister() without destroying/freeing it. This leaves the bdi in the bdi->dev = NULL, bdi->wb.task = NULL, bdi->bdi_list removed state. When sync(2) gets the bdi before bdi_unregister() and calls bdi_queue_work() after the unregister, trace_writeback_queue will be dereferencing the NULL bdi->dev. Fix it with a simple test for NULL. LKML-reference: http://lkml.org/lkml/2012/1/18/346Reported-by:
Rabin Vincent <rabin@rab.in> Tested-by:
Namjae Jeon <linkinjeon@gmail.com> Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Eliad Peller authored
commit 07ae2dfc upstream. The current code checks for stored_mpdu_num > 1, causing the reorder_timer to be triggered indefinitely, but the frame is never timed-out (until the next packet is received) Signed-off-by:
Eliad Peller <eliad@wizery.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Dan Carpenter authored
commit f6302f1b upstream. "subbuf_size" and "n_subbufs" come from the user and they need to be capped to prevent an integer overflow. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Wu Fengguang authored
commit 3310225d upstream. PROP_MAX_SHIFT should be set to <=32 on 64-bit box. This fixes two bugs in the below lines of bdi_dirty_limit(): bdi_dirty *= numerator; do_div(bdi_dirty, denominator); 1) divide error: do_div() only uses the lower 32 bit of the denominator, which may trimmed to be 0 when PROP_MAX_SHIFT > 32. 2) overflow: (bdi_dirty * numerator) could easily overflow if numerator used up to 48 bits, leaving only 16 bits to bdi_dirty Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by:
Ilya Tumaykin <librarian_rus@yahoo.com> Tested-by:
-
Nikolaus Schulz authored
commit eb2f255b upstream. In order to extract the high byte of the 16-bit word, shift the word to the right, not to the left. Signed-off-by:
-
Daniel Vetter authored
commit e57b6886 upstream. According to a bug report, it doesn't have one. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44263Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Jiri Olsa authored
commit 7a0153ee upstream. By adding following objects: bench/mem-memcpy-x86-64-asm.o the x86_64 perf binary ended up with executable stack. The reason was that above object are assembler sourced and is missing the GNU-stack note section. In such case the linker assumes that the final binary should not be restricted at all and mark the stack as RWX. Adding section ".note.GNU-stack" definition to mentioned object, with all flags disabled, thus omiting this object from linker stack flags decision. Problem introduced in: $ git describe ea7872b9 v2.6.37-rc2-19-gea7872b9 Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=783570Reported-by:
Clark Williams <williams@redhat.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> [ committer note: Backported fix to perf/urgent (3.3-rc2+) ] Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Naveen N. Rao authored
commit a4a03fc7 upstream. This patch fixes an issue where perf report shows nan% for certain perf.data files. The below is from a report for a do_fork probe: -nan% sshd [kernel.kallsyms] [k] do_fork -nan% packagekitd [kernel.kallsyms] [k] do_fork -nan% dbus-daemon [kernel.kallsyms] [k] do_fork -nan% bash [kernel.kallsyms] [k] do_fork A git bisect shows commit f3bda2c9 as the cause. However, looking back through the git history, I saw commit 640c03ce which seems to have removed the required initialization for perf_sample->period. The problem only started showing after commit f3bda2c9. The below patch re-introduces the initialization and it fixes the problem for me. With the below patch, for the same perf.data: 73.08% bash [kernel.kallsyms] [k] do_fork 8.97% 11-dhclient [kernel.kallsyms] [k] do_fork 6.41% sshd [kernel.kallsyms] [k] do_fork 3.85% 20-chrony [kernel.kallsyms] [k] do_fork 2.56% sendmail [kernel.kallsyms] [k] do_fork This patch applies over current linux-tip commit 9949284. Problem introduced in: $ git describe 640c03ce v2.6.37-rc3-83-g640c03ce Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Robert Richter <robert.richter@amd.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120203170113.5190.25558.stgit@localhost6.localdomain6Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
- 13 Feb, 2012 9 commits
-
-
Greg Kroah-Hartman authored
-
Eric Dumazet authored
[ Upstream commit d3aaeb38, along with dependent backports of commits: 69cce1d1 9de79c12 218fa90f 580da35a f7e57044 e049f288 ] Gergely Kalman reported crashes in check_peer_redir(). It appears commit f39925db (ipv4: Cache learned redirect information in inetpeer.) added a race, leading to possible NULL ptr dereference. Since we can now change dst neighbour, we should make sure a reader can safely use a neighbour. Add RCU protection to dst neighbour, and make sure check_peer_redir() can be called safely by different cpus in parallel. As neighbours are already freed after one RCU grace period, this patch should not add typical RCU penalty (cache cold effects) Many thanks to Gergely for providing a pretty report pointing to the bug. Reported-by:
Gergely Kalman <synapse@hippy.csoma.elte.hu> Signed-off-by:
-
Andreas Herrmann authored
commit a8eb2848 upstream. The driver uses the pstate number from the status register as index in its table of ACPI pstates (powernow_table). This is wrong as this is not a 1-to-1 mapping. For example we can have _PSS information to just utilize Pstate 0 and Pstate 4, ie. powernow-k8: Core Performance Boosting: on. powernow-k8: 0 : pstate 0 (2200 MHz) powernow-k8: 1 : pstate 4 (1400 MHz) In this example the driver's powernow_table has just 2 entries. Using the pstate number (4) as index into this table is just plain wrong. Signed-off-by:
Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Andreas Herrmann authored
commit 201bf0f1 upstream. Due to CPB we can't directly map SW Pstates to Pstate MSRs. Get rid of the paranoia check. (assuming that the ACPI Pstate information is correct.) Signed-off-by:
-
Axel Lin authored
commit b5266ea6 upstream. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Rui li authored
commit 1608ea5f upstream. As ZTE have and will use more pid for new products this year, so we need to add some new zte 3g-dongle's pid on option.c , and delete one pid 0x0154 because it use for mass-storage port. Signed-off-by:
Rui li <li.rui27@zte.com.cn> Signed-off-by:
-
Milan Kocian authored
commit 90451e69 upstream. Signed-off-by:
Milan Kocian <milon@wq.cz> Signed-off-by:
-
Jayachandran C authored
commit e4436a7c upstream. The Netlogic XLP SoC's on-chip USB controller appears as a PCI USB device, but does not need the EHCI/OHCI handoff done in usb/host/pci-quirks.c. The pci-quirks.c is enabled for all vendors and devices, and is enabled if USB and PCI are configured. If we do not skip the qurik handling on XLP, the readb() call in ehci_bios_handoff() will cause a crash since byte access is not supported for EHCI registers in XLP. Signed-off-by:
Jayachandran C <jayachandranc@netlogicmicro.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Timo Juhani Lindfors authored
commit 683da59d upstream. ab943a2e (USB: gadget: gadget zero uses new suspend/resume hooks) introduced a copy-paste error where f_loopback.c writes to a variable declared in f_sourcesink.c. This prevents one from creating gadgets that only have a loopback function. Signed-off-by:
Timo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
