- 03 Mar, 2016 40 commits
-
-
Lyude authored
commit 3d849b02 upstream. We don't actually check for INTEL_OUTPUT_DP_MST at all in here, as a result we skip assigning a DPLL to any DP MST ports, which makes link training fail: [ 1442.933896] [drm:intel_power_well_enable] enabling DDI D power well [ 1442.933905] [drm:skl_set_power_well] Enabling DDI D power well [ 1442.933957] [drm:intel_mst_pre_enable_dp] 0 [ 1442.935474] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 1442.935477] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1442.935480] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1442.936190] [drm:intel_dp_set_signal_levels] Using signal levels 05000000 [ 1442.936193] [drm:intel_dp_set_signal_levels] Using vswing level 1 [ 1442.936195] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1442.936858] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1442.936862] [drm:intel_dp_set_signal_levels] Using vswing level 2 … [ 1442.998253] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up [ 1442.998512] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting After which the pipe state goes completely out of sync: [ 70.075596] [drm:check_crtc_state] [CRTC:25] [ 70.075696] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in ddi_pll_sel (expected 0x00000000, found 0x00000001) [ 70.075747] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in shared_dpll (expected -1, found 0) [ 70.075798] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000021) [ 70.075840] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr1 (expected 0x00000000, found 0x80400173) [ 70.075884] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr2 (expected 0x00000000, found 0x000003a5) [ 70.075954] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 262750, found 72256) [ 70.075999] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in port_clock (expected 540000, found 148500) And if you're especially lucky, it keeps going downhill: [ 83.309256] Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler [ 83.309265] [ 83.309265] ================================= [ 83.309266] [ INFO: inconsistent lock state ] [ 83.309267] 4.5.0-rc1Lyude-Test #265 Not tainted [ 83.309267] --------------------------------- [ 83.309268] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 83.309270] Xorg/1194 [HC0[1]:SC0[0]:HE1:SE1] takes: [ 83.309293] (&(&dev_priv->uncore.lock)->rlock){?.-...}, at: [<ffffffffa02a6073>] gen9_write32+0x63/0x400 [i915] [ 83.309293] {IN-HARDIRQ-W} state was registered at: [ 83.309297] [<ffffffff810e84f4>] __lock_acquire+0x9c4/0x1d00 [ 83.309299] [<ffffffff810ea1be>] lock_acquire+0xce/0x1c0 [ 83.309302] [<ffffffff8177d936>] _raw_spin_lock_irqsave+0x56/0x90 [ 83.309321] [<ffffffffa02a5492>] gen9_read32+0x52/0x3d0 [i915] [ 83.309332] [<ffffffffa024beea>] gen8_irq_handler+0x27a/0x6a0 [i915] [ 83.309337] [<ffffffff810fdbc1>] handle_irq_event_percpu+0x41/0x300 [ 83.309339] [<ffffffff810fdeb9>] handle_irq_event+0x39/0x60 [ 83.309341] [<ffffffff811010b4>] handle_edge_irq+0x74/0x130 [ 83.309344] [<ffffffff81009073>] handle_irq+0x73/0x120 [ 83.309346] [<ffffffff817805f1>] do_IRQ+0x61/0x120 [ 83.309348] [<ffffffff8177e6d6>] ret_from_intr+0x0/0x20 [ 83.309351] [<ffffffff815f5105>] cpuidle_enter_state+0x105/0x330 [ 83.309353] [<ffffffff815f5367>] cpuidle_enter+0x17/0x20 [ 83.309356] [<ffffffff810dbe1a>] call_cpuidle+0x2a/0x50 [ 83.309358] [<ffffffff810dc1dd>] cpu_startup_entry+0x26d/0x3a0 [ 83.309360] [<ffffffff817701da>] rest_init+0x13a/0x140 [ 83.309363] [<ffffffff81f2af8e>] start_kernel+0x475/0x482 [ 83.309365] [<ffffffff81f2a315>] x86_64_start_reservations+0x2a/0x2c [ 83.309367] [<ffffffff81f2a452>] x86_64_start_kernel+0x13b/0x14a Fixes: 82d35437 ("drm/i915/skl: Implementation of SKL DPLL programming") Signed-off-by:
Lyude <cpaul@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1454428183-994-1-git-send-email-cpaul@redhat.com (cherry picked from commit 78385cb3) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ville Syrjälä authored
commit 6f94b6dd upstream. On SKL+ plane scaling is mutually exclusive with color keying. The code check for this, but during some refactoring the code got changed to also reject primary plane windowing when color keying is used. There is no such restriction in the hardware, so restore the original logic. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 061e4b8d ("drm/i915: clean up atomic plane check functions, v2.") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452883613-28549-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit 693bdc28) Signed-off-by:
-
Jani Nikula authored
commit 5efd4076 upstream. Per DP spec, the source device should fall back to 18 bpp, VESA range RGB when the sink capability is unknown. Fix the color depth clamping. 18 bpp color depth should ensure full color range in automatic mode. The clamping has been HDMI specific since its introduction in commit 996a2239 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Apr 19 11:24:34 2013 +0200 drm/i915: Disable high-bpc on pre-1.4 EDID screens Reported-and-tested-by:
Dihan Wickremasuriya <nayomal@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331Reviewed-by:
-
Francisco Jerez authored
commit 935a0ff0 upstream. We need to set the DC FLUSH PIPE_CONTROL bit on Gen7+ to guarantee that writes performed via the HDC are visible in memory. Fixes an intermittent failure in a Piglit test that writes to a BO from a shader using GL atomic counters (implemented as HDC untyped atomics) and then expects the memory to read back the same value after mapping it on the CPU. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91298Tested-by:
Mark Janes <mark.a.janes@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Francisco Jerez <currojerez@riseup.net> Reviewed-by:
-
Daniel Vetter authored
commit f5949141 upstream. Since commit ac9b8236 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Fri Nov 27 18:55:26 2015 +0200 drm/i915: Introduce a gmbus power domain gmbus also needs the power domain infrastructure right from the start, since as soon as we register the i2c controllers someone can use them. v2: Adjust cleanup paths too (Chris). v3: Rebase onto -nightly (totally bogus tree I had lying around) and also move dpio init head (Ville). v4: Ville instead suggested to move gmbus setup later in the sequence, since it's only needed by the modeset code. v5: Move even close to the actual user, right next to the comment that states where we really need gmbus (and interrupts!). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: ac9b8236 ("drm/i915: Introduce a gmbus power domain") References: http://www.spinics.net/lists/intel-gfx/msg83075.htmlSigned-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
-
Lyude authored
commit 2dc2f761 upstream. This fixes reprobing of display connectors on resume. After some talking with danvet on IRC, I learned that calling drm_helper_hpd_irq_event() does actually trigger a full reprobe of each connector's status. It turns out this is the actual reason reprobing on resume hasn't been working (this was observed on a T440s): - We call hpd_init() - We check each connector for a couple of things before marking connector->polled with DRM_CONNECTOR_POLL_HPD, one of which is an active encoder. Of course, a disconnected port won't have an active encoder, so we don't add the flag to any of the connectors. - We call drm_helper_hpd_irq_event() - drm_helper_irq_event() checks each connector for the DRM_CONNECTOR_POLL_HPD flag. The only one that has it is eDP-1, so we skip reprobing each connector except that one. In addition, we also now avoid setting connector->polled to DRM_CONNECTOR_POLL_HPD for MST connectors, since their reprobing is handled by the mst helpers. This is probably what was originally intended to happen here. Changes since V1: * Use the explanation of the issue as the commit message instead * Change the title of the commit, since this does more then just stop a check for an encoder now * Add "Fixes" line for the patch that introduced this regression * Don't enable DRM_CONNECTOR_POLL_HPD for mst connectors Changes since V2: * Put patch changelog above Signed-off-by * Follow Daniel Vetter's suggestion for making the code here a bit more legible Fixes: 0e32b39c ("drm/i915: add DP 1.2 MST support (v0.7)") Signed-off-by:
-
Chris Wilson authored
commit 06ef83a7 upstream. Following a GPU reset, we may leave the context in a poorly defined state, and reloading from that context will leave the GPU flummoxed. For secondary contexts, this will lead to that context being banned - but currently it is also causing the default context to become banned, leading to turmoil in the shared state. This is a regression from commit 6702cf16 [v4.1] Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Mon Mar 16 16:00:58 2015 +0000 drm/i915: Initialize all contexts which quietly introduced the removal of the MI_RESTORE_INHIBIT on the default context. v2: Mark the global default context as uninitialized on GPU reset so that the context-local workarounds are reloaded upon re-enabling. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1448630935-27377-1-git-send-email-chris@chris-wilson.co.ukReviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> [danvet: This seems to fix a gpu hand on after the first resume, resulting in any future suspend operation failing with -EIO because the gpu seems to be in a funky state. Somehow this patch fixes that.] Signed-off-by:
-
Insu Yun authored
commit dabe1954 upstream. In drm_dp_mst_allocate_vcpi, it returns true in two paths, but in one path, there is no reference couting decrease. Signed-off-by:
Insu Yun <wuninsu@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Nicolai Hähnle authored
commit f6ff4f67 upstream. An arbitrary amount of time can pass between spin_unlock and radeon_fence_wait_any, so we need to ensure that nobody frees the fences from under us. Based on the analogous fix for amdgpu. Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Oded Gabbay authored
commit c5244987 upstream. Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Dave Airlie authored
commit 4b0e4e4a upstream. Reviewed-by:
-
Slava Grigorev authored
commit fe6fc1f1 upstream. Properly setup the DFS divider for DP audio for DCE4.1. Signed-off-by:
Slava Grigorev <slava.grigorev@amd.com> Reviewed-by:
-
Slava Grigorev authored
commit a64c9dab upstream. Move encoding of DFS (digital frequency synthesizer) divider into a separate function and improve calculation precision. Signed-off-by:
-
Slava Grigorev authored
commit c9a392ea upstream. This is preparation for the fixes in the following patches. Signed-off-by:
-
Alex Deucher authored
commit cc78eb22 upstream. Firmware is LE. Need to properly byteswap some of the fields so they are interpreted correctly by the driver on BE systems. Reviewed-by:
-
Alex Deucher authored
commit 0eb1c3d4 upstream. Combine the two quirks. bug: https://bugzilla.kernel.org/show_bug.cgi?id=109481Signed-off-by:
-
Slava Grigorev authored
commit ac4a9350 upstream. DP audio is derived from the dfs clock. Signed-off-by:
-
Alex Deucher authored
commit dbb17a21 upstream. Need to call this on resume if displays changes during suspend in order to properly be notified of changes. Signed-off-by:
-
Felix Kuehling authored
commit 42ef344c upstream. eoffset is sometimes treated as the last address inside the address range, and sometimes as the first address outside the range. This was resulting in errors when a test filled up the entire address space. Make it consistent to always be the last address within the range. Also fixed related errors when checking the VA limit and in radeon_vm_fence_pts. Signed-off-by:
Felix.Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
-
Mykola Lysenko authored
commit 91a25e46 upstream. This is needed to properly deallocate port payload after downstream branch get unplugged. In order to do this unplugged MST topology should be preserved, to find first alive port on path to unplugged MST topology, and send payload deallocation request to branch device of found port. For this mstb and port kref's are used in reversed order to track when port and branch memory could be freed. Added additional functions to find appropriate mstb as described above. Signed-off-by:
Mykola Lysenko <Mykola.Lysenko@amd.com> Reviewed-by:
Harry Wentland <Harry.Wentland@amd.com> Signed-off-by:
-
Andrey Grodzovsky authored
commit c175cd16 upstream. On DELL U3014 if you clear the table before enabling MST it sometimes hangs the receiver. Signed-off-by:
Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by:
-
Hersen Wu authored
commit 5e93b820 upstream. Previous implementation does not handle case below: boot up one MST branch to DP connector of ASIC. After boot up, hot plug 2nd MST branch to DP output of 1st MST, GUID is not created for 2nd MST branch. When downstream port of 2nd MST branch send upstream request, it fails because 2nd MST branch GUID is not available. New Implementation: only create GUID for MST branch and save it within Branch. Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
-
Harry Wentland authored
commit a9ebb3e4 upstream. Our PBN value overflows the 20 bits integer part of the 20.12 fixed point. We need to use 31.32 fixed point to avoid this. This happens with display clocks larger than 293122 (at 24 bpp), which we see with the Sharp (and similar) 4k tiled displays. Signed-off-by:
-
Harry Wentland authored
commit 64566b5e upstream. drm_fixp_from_fraction allows us to create a fixed point directly from a fraction, rather than creating fixed point values and dividing later. This avoids overflow of our 64 bit value for large numbers. drm_fixp2int_ceil allows us to return the ceiling of our fixed point value. [airlied: squash Jordan's fix] 32-bit-build-fix: Jordan Lazare <Jordan.Lazare@amd.com> Signed-off-by:
-
Mykola Lysenko authored
commit 7a11a334 upstream. This is needed to receive correct port number from RAD, so MSTB could be found Acked-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Mykola Lysenko authored
commit 75af4c8c upstream. This fix is needed to support more then two branch displays, so RAD address consist at least of 2 elements Acked-by:
-
Mykola Lysenko authored
commit 1f16ee7f upstream. We should always send reply for UP request in order to make downstream device clean-up resources appropriately. Issue was that reply for UP request was sent only once. Acked-by:
-
Mykola Lysenko authored
commit bd934320 upstream. In case broadcast message received in UP request, RAD cannot be used to identify message originator. Message should be parsed, originator should be found by GUID from parsed message. Also reply with broadcast in case broadcast message received (for now it is always broadcast) Acked-by:
-
Thierry Reding authored
commit 870571a5 upstream. The error cleanup paths aren't quite correct and will crash upon deferred probe. Reviewed-by:
Ben Skeggs <bskeggs@redhat.com> Reviewed-by:
Alexandre Courbot <acourbot@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Ben Skeggs authored
commit 95664e66 upstream. This can happen under some annoying circumstances, and is a quick fix until more substantial changes can be made. Fixed eDP mode changes on (at least) the Lenovo P50. Signed-off-by:
-
Mario Kleiner authored
commit ff683df7 upstream. In the display resume path, move the calls to drm_vblank_on() after the point when the display engine is running again. Since changes were made to drm_update_vblank_count() in Linux 4.4+ to emulate hw vblank counters via vblank timestamping, the function drm_vblank_on() now needs working high precision vblank timestamping and therefore working scanout position queries at time of call. These don't work before the display engine gets restarted, causing miscalculation of vblank counter increments and thereby large forward jumps in vblank count at display resume. These jumps can cause client hangs on resume, or desktop hangs in the case of composited desktops. Fix this Linux 4.4 regression by reordering calls accordingly. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: ville.syrjala@linux.intel.com Cc: daniel.vetter@ffwll.ch Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
Ben Skeggs authored
commit 0a882cad upstream. fdo#93634 Signed-off-by:
-
Alex Deucher authored
commit 8e7cedc6 upstream. set_power_state defaults to no displays, so we need to update the display configuration after setting up the powerstate on the first call. In most cases this is not an issue since ends up getting called multiple times at any given modeset and the proper order is achieved in the display changed handling at the top of the function. Reviewed-by:
Jordan Lazare <Jordan.Lazare@amd.com> Signed-off-by:
-
Mario Kleiner authored
commit e1d09dc0 upstream. This fixes a regression introduced in Linux 4.4. This is a port of the same fix for radeon-kms in the patch "drm/radeon: Don't hang in radeon_flip_work_func on disabled crtc. (v2)" Limit the amount of time amdgpu_flip_work_func can delay programming a page flip, by both limiting the maximum amount of time per wait cycle and the maximum number of wait cycles. Continue the flip if the limit is exceeded, even if that may result in a visual or timing glitch. This is to prevent a hang of page flips, as reported in fdo bug #93746: Disconnecting a DisplayPort display in parallel to a kms pageflip getting queued can cause the following hang of page flips and thereby an unusable desktop: 1. kms pageflip ioctl() queues pageflip -> queues execution of amdgpu_flip_work_func. 2. Hotunplug of display causes the driver to DPMS OFF the unplugged display. Display engine shuts down, scanout no longer moves, but stays at its resting position at start line of vblank. 3. amdgpu_flip_work_func executes while crtc is off, and due to the non-moving scanout position, the new flip delay code introduced into Linux 4.4 by commit 8e36f9d3 ("drm/amdgpu: Fixup hw vblank counter/ts..") enters an infinite wait loop. 4. After reconnecting the display, the pageflip continues to hang in 3. and the display doesn't update its view of the desktop. This patch fixes the Linux 4.4 regression from fdo bug #93746 <https://bugs.freedesktop.org/show_bug.cgi?id=93746> Reported-by:
Bernd Steinhauser <linux@bernd-steinhauser.de> Signed-off-by:
-
Rasmus Villemoes authored
commit 09ccbb74 upstream. We need to use post-decrement to get the pci_map_page undone also for i==0, and to avoid some very unpleasant behaviour if pci_map_page failed already at i==0. Reviewed-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Christian König authored
commit cc1de6e8 upstream. Otherwise we could try to evict overlapping userptr BOs in get_user_pages(), leading to a possible circular locking dependency. Signed-off-by:
-
Nicolai Hähnle authored
commit a8d81b36 upstream. An arbitrary amount of time can pass between spin_unlock and fence_wait_any_timeout, so we need to ensure that nobody frees the fences from under us. A stress test (rapidly starting and killing hundreds of glxgears instances) ran into a deadlock in fence_wait_any_timeout after about an hour, and this race condition appears to be a plausible cause. v2: agd: rebase on upstream Signed-off-by:
-
Nicolai Hähnle authored
commit b19763d0 upstream. Signed-off-by:
-
Flora Cui authored
commit ca198528 upstream. No need to re-init asic if it's already been initialized. Skip IB tests since kernel processes are frozen in thaw. Signed-off-by:
Flora Cui <Flora.Cui@amd.com> Reviewed-by:
-
Alex Deucher authored
commit dba280b2 upstream. It's working now. bug: https://bugs.freedesktop.org/show_bug.cgi?id=92270Reviewed-by:
Ken Wang <Qingqing.Wang@amd.com> Reviewed-by:
-
