- 29 Jun, 2017 33 commits
-
-
Paul Burton authored
Rather than using BUG_ON in the case of an invalid attempt to lock access to a non-zero VP on a pre-CM3 system, use WARN_ON so that we have even the slightest chance of recovery. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16194/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
CM3 provides a GCR_CL_OTHER register per VP, rather than only per core. This means that we don't need to prevent other VPs within a core from racing with code that makes use of the core-other register region. Reduce locking overhead by demoting the per-core spinlock providing protection for CM2.5 & lower to a per-CPU/per-VP spinlock for CM3 & higher. Signed-off-by:
-
Paul Burton authored
If we're running on a system with only 1 possible CPU then it makes no sense to reserve or initialise IPIs since we'll never use them. Avoid doing so. Signed-off-by:
-
Maciej W. Rozycki authored
Reduce the log level for branch emulation error messages issued before sending SIGILL by `__compute_return_epc_for_insn' as these are triggered by user software and are not an event that would normally require any attention. The same signal sent from elsewhere does not actually leave any trace in the kernel log at all. Signed-off-by:
Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16402/Signed-off-by:
-
Maciej W. Rozycki authored
Update commit 1ac94400 ("MIPS: math-emu: Add mfhc1 & mthc1 support.") and like done throughout `cop1Emulate' for other cases also for the MFHC1 and MTHC1 instructions return SIGILL right away rather than jumping to a single `return' statement. Signed-off-by:
-
Maciej W. Rozycki authored
This is a user-visible message, so we want it to be spelled correctly. Fixes: 5f9f41c4 ("MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6") Signed-off-by:
-
Maciej W. Rozycki authored
Fix: * commit 8467ca01 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction"), * commit 84fef630 ("MIPS: Emulate the new MIPS R6 BALC instruction"), * commit 69b9a2fd ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions"), * commit 28d6f93d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions"), * commit c893ce38 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") and send SIGILL rather than returning -SIGILL for R6 branch and jump instructions. Returning -SIGILL is never correct as the API defines this function's result upon error to be -EFAULT and a signal actually issued. Fixes: 8467ca01 ("MIPS: Emulate the new MIPS R6 branch compact (BC) instruction") Fixes: 84fef630 ("MIPS: Emulate the new MIPS R6 BALC instruction") Fixes: 69b9a2fd ("MIPS: Emulate the new MIPS R6 BEQZC and JIC instructions") Fixes: 28d6f93d ("MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructions") Fixes: c893ce38 ("MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructions") Signed-off-by:
-
Maciej W. Rozycki authored
Fix commit 319824ea ("MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6") and also send SIGILL rather than returning -SIGILL for BLTZAL, BLTZALL, BGEZAL and BGEZALL instruction encodings no longer supported in R6, except where emulated. Returning -SIGILL is never correct as the API defines this function's result upon error to be -EFAULT and a signal actually issued. Fixes: 319824ea ("MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6") Signed-off-by:
-
Maciej W. Rozycki authored
Use the more accurate `sigill_r2r6' name for the label used in the case of sending SIGILL in the absence of the instruction emulator for an earlier ISA level instruction that has been removed as from the R6 ISA, so that the `sigill_r6' name is freed for the situation where an R6 instruction is not supposed to be interpreted, because the executing processor does not support the R6 ISA. Signed-off-by:
-
Maciej W. Rozycki authored
Fix commit e50c0a8f ("Support the MIPS32 / MIPS64 DSP ASE.") and send SIGILL rather than SIGBUS whenever an unimplemented BPOSGE32 DSP ASE instruction has been encountered in `__compute_return_epc_for_insn' as our Reserved Instruction exception handler would in response to an attempt to actually execute the instruction. Sending SIGBUS only makes sense for the unaligned PC case, since moved to `__compute_return_epc'. Adjust function documentation accordingly, correct formatting and use `pr_info' rather than `printk' as the other exit path already does. Fixes: e50c0a8f ("Support the MIPS32 / MIPS64 DSP ASE.") Signed-off-by:
-
Maciej W. Rozycki authored
Fix a regression introduced with commit fb6883e5 ("MIPS: microMIPS: Support handling of delay slots.") and defer to `__compute_return_epc' if the ISA bit is set in EPC with non-MIPS16, non-microMIPS hardware, which will then arrange for a SIGBUS due to an unaligned instruction reference. Returning EPC here is never correct as the API defines this function's result to be either a negative error code on failure or one of 0 and BRANCH_LIKELY_TAKEN on success. Fixes: fb6883e5 ("MIPS: microMIPS: Support handling of delay slots.") Signed-off-by:
-
Maciej W. Rozycki authored
Complement commit fb6883e5 ("MIPS: microMIPS: Support handling of delay slots.") and actually decode the regular MIPS JALX major instruction opcode, the handling of which has been added with the said commit for EPC calculation in `__compute_return_epc_for_insn'. Fixes: fb6883e5 ("MIPS: microMIPS: Support handling of delay slots.") Signed-off-by:
-
Maciej W. Rozycki authored
Terminate FPU emulation immediately whenever an ISA mode switch has been observed. This is so that we do not interpret machine code in the wrong mode, for example when a regular MIPS FPU instruction has been placed in a delay slot of a jump that switches into the MIPS16 mode, as with the following code (taken from a GCC test suite case): 00400650 <set_fast_math>: 400650: 3c020100 lui v0,0x100 400654: 03e00008 jr ra 400658: 44c2f800 ctc1 v0,c1_fcsr 40065c: 00000000 nop [...] 004012d0 <__libc_csu_init>: 4012d0: f000 6a02 li v0,2 4012d4: f150 0b1c la v1,3f9430 <_DYNAMIC-0x6df0> 4012d8: f400 3240 sll v0,16 4012dc: e269 addu v0,v1 4012de: 659a move gp,v0 4012e0: f00c 64f6 save a0-a2,48,ra,s0-s1 4012e4: 673c move s1,gp 4012e6: f010 9978 lw v1,-32744(s1) 4012ea: d204 sw v0,16(sp) 4012ec: eb40 jalr v1 4012ee: 653b move t9,v1 4012f0: f010 997c lw v1,-32740(s1) 4012f4: f030 9920 lw s1,-32736(s1) 4012f8: e32f subu v1,s1 4012fa: 326b sra v0,v1,2 4012fc: d206 sw v0,24(sp) 4012fe: 220c beqz v0,401318 <__libc_csu_init+0x48> 401300: 6800 li s0,0 401302: 99e0 lw a3,0(s1) 401304: 4801 addiu s0,1 401306: 960e lw a2,56(sp) 401308: 4904 addiu s1,4 40130a: 950d lw a1,52(sp) 40130c: 940c lw a0,48(sp) 40130e: ef40 jalr a3 401310: 653f move t9,a3 401312: 9206 lw v0,24(sp) 401314: ea0a cmp v0,s0 401316: 61f5 btnez 401302 <__libc_csu_init+0x32> 401318: 6476 restore 48,ra,s0-s1 40131a: e8a0 jrc ra Here `set_fast_math' is called from `40130e' (`40130f' with the ISA bit) and emulation triggers for the CTC1 instruction. As it is in a jump delay slot emulation continues from `401312' (`401313' with the ISA bit). However we have no path to handle MIPS16 FPU code emulation, because there are no MIPS16 FPU instructions. So the default emulation path is taken, interpreting a 32-bit word fetched by `get_user' from `401313' as a regular MIPS instruction, which is: 401313: f5ea0a92 sdc1 $f10,2706(t7) This makes the FPU emulator proceed with the supposed SDC1 instruction and consequently makes the program considered here terminate with SIGSEGV. A similar although less severe issue exists with pure-microMIPS processors in the case where similarly an FPU instruction is emulated in a delay slot of a register jump that (incorrectly) switches into the regular MIPS mode. A subsequent instruction fetch from the jump's target is supposed to cause an Address Error exception, however instead we proceed with regular MIPS FPU emulation. For simplicity then, always terminate the emulation loop whenever a mode change is detected, denoted by an ISA mode bit flip. As from commit 377cb1b6 ("MIPS: Disable MIPS16/microMIPS crap for platforms not supporting these ASEs.") the result of `get_isa16_mode' can be hardcoded to 0, so we need to examine the ISA mode bit by hand. This complements commit 102cedc3 ("MIPS: microMIPS: Floating point support.") which added JALX decoding to FPU emulation. Fixes: 102cedc3 ("MIPS: microMIPS: Floating point support.") Signed-off-by:
-
Paul Burton authored
This patch switches MIPS to make use of generically implemented queued spinlocks, rather than the ticket spinlocks used previously. This allows us to drop a whole load of inline assembly, share more generic code, and is also a performance win. Results from running the AIM7 short workload on a MIPS Creator Ci40 (ie. 2 core 2 thread interAptiv CPU clocked at 546MHz) with v4.12-rc4 pistachio_defconfig, with ftrace disabled due to a current bug, and both with & without use of queued rwlocks & spinlocks: Forks | v4.12-rc4 | +qlocks | Change -------|-----------|----------|-------- 10 | 52630.32 | 53316.31 | +1.01% 20 | 51777.80 | 52623.15 | +1.02% 30 | 51645.92 | 52517.26 | +1.02% 40 | 51634.88 | 52419.89 | +1.02% 50 | 51506.75 | 52307.81 | +1.02% 60 | 51500.74 | 52322.72 | +1.02% 70 | 51434.81 | 52288.60 | +1.02% 80 | 51423.22 | 52434.85 | +1.02% 90 | 51428.65 | 52410.10 | +1.02% The kernels used for these tests also had my "MIPS: Hardcode cpu_has_* where known at compile time due to ISA" patch applied, which allows the kernel_uses_llsc checks in cmpxchg() & xchg() to be optimised away at compile time. Signed-off-by: -
Paul Burton authored
This patch switches MIPS to make use of generically implemented queued read/write locks, rather than the custom implementation used previously. This allows us to drop a whole load of inline assembly, share more generic code, and is also a performance win. Results from running the AIM7 short workload on a MIPS Creator Ci40 (ie. 2 core 2 thread interAptiv CPU clocked at 546MHz) with v4.12-rc4 pistachio_defconfig, with ftrace disabled due to a current bug, and both with & without use of queued rwlocks & spinlocks: Forks | v4.12-rc4 | +qlocks | Change -------|-----------|----------|-------- 10 | 52630.32 | 53316.31 | +1.01% 20 | 51777.80 | 52623.15 | +1.02% 30 | 51645.92 | 52517.26 | +1.02% 40 | 51634.88 | 52419.89 | +1.02% 50 | 51506.75 | 52307.81 | +1.02% 60 | 51500.74 | 52322.72 | +1.02% 70 | 51434.81 | 52288.60 | +1.02% 80 | 51423.22 | 52434.85 | +1.02% 90 | 51428.65 | 52410.10 | +1.02% The kernels used for these tests also had my "MIPS: Hardcode cpu_has_* where known at compile time due to ISA" patch applied, which allows the kernel_uses_llsc checks in cmpxchg() & xchg() to be optimised away at compile time. Signed-off-by: -
Paul Burton authored
The __xchg() function declares its first 2 arguments in reverse order compared to the xchg() macro, which is confusing & serves no purpose. Reorder the arguments such that __xchg() & xchg() match. Signed-off-by:
-
Paul Burton authored
Implement support for 1 & 2 byte cmpxchg() using read-modify-write atop a 4 byte cmpxchg(). This allows us to support these atomic operations despite the MIPS ISA only providing 4 & 8 byte atomic operations. This is required in order to support queued rwlocks (qrwlock) in a later patch, since these make use of a 1 byte cmpxchg() in their slow path. Signed-off-by:
-
Paul Burton authored
Implement 1 & 2 byte xchg() using read-modify-write atop a 4 byte cmpxchg(). This allows us to support these atomic operations despite the MIPS ISA only providing for 4 & 8 byte atomic operations. This is required in order to support queued spinlocks (qspinlock) in a later patch, since these make use of a 2 byte xchg() in their slow path. Signed-off-by:
-
Paul Burton authored
Replace the macro definition of __cmpxchg() with an inline function, which is easier to read & modify. The cmpxchg() & cmpxchg_local() macros are adjusted to call the new __cmpxchg() function. Signed-off-by:
-
Paul Burton authored
The __xchg_u32() & __xchg_u64() functions now add very little value. This patch therefore removes them, by: - Moving memory barriers out of them & into xchg(), which also removes the duplication & readies us to support xchg_relaxed() if we wish to. - Calling __xchg_asm() directly from __xchg(). - Performing the check for CONFIG_64BIT being enabled in the size=8 case of __xchg(). Signed-off-by: -
Paul Burton authored
xchg() has up until now simply returned the x parameter in cases where it is called with a pointer to a value of an unsupported size. This will often cause the calling code to hit a failure path, presuming that the value of x differs from the content of the memory pointed at by ptr, but we can do better by producing a compile-time or link-time error such that unsupported calls to xchg() are detectable earlier than runtime. This patch does this in the same was as is already done for cmpxchg(), using a call to a missing function annotated with __compiletime_error(). Signed-off-by:
-
Paul Burton authored
Our cmpxchg() implementation relies upon generating a call to a function which doesn't really exist (__cmpxchg_called_with_bad_pointer) to create a link failure in cases where cmpxchg() is called with a pointer to a value of an unsupported size. The __compiletime_error macro can be used to decorate a function such that a call to it generates a compile-time, rather than a link-time, error. This patch uses __compiletime_error to cause bad cmpxchg() calls to error out at compile time rather than link time, allowing errors to occur more quickly & making it easier to spot where the problem comes from. Signed-off-by:
-
Paul Burton authored
Use a macro to generate the 32 & 64 bit variants of the backing code for xchg(), much as is already done for cmpxchg(). This removes the duplication that could previously be found in __xchg_u32() & __xchg_u64(). Signed-off-by:
-
Paul Burton authored
Prior to this patch the xchg & cmpxchg functions have duplicated code which is for all intents & purposes identical apart from use of a branch-likely instruction in the R10000_LLSC_WAR case & a regular branch instruction in the non-R10000_LLSC_WAR case. This patch removes the duplication, declaring a __scbeqz macro to select the branch instruction suitable for use when checking the result of an sc instruction & making use of it to unify the 2 cases. In __xchg_u{32,64}() this means writing the branch in asm, where it was previously being done in C as a do...while loop for the non-R10000_LLSC_WAR case. As this is a single instruction, and adds consistency with the R10000_LLSC_WAR cases & the cmpxchg() code, this seems worthwhile. Signed-off-by: -
Miodrag Dinic authored
Add handling of missaligned access for DSP load instructions lwx & lhx. Since DSP instructions share SPECIAL3 opcode with other non-DSP instructions, necessary logic was inserted for distinguishing between instructions with SPECIAL3 opcode. For that purpose, the instruction format for DSP instructions is added to arch/mips/include/uapi/asm/inst.h. Signed-off-by:
Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by:
Aleksandar Markovic <aleksandar.markovic@imgtech.com> Cc: James.Hogan@imgtec.com Cc: Paul.Burton@imgtec.com Cc: Raghu.Gandham@imgtec.com Cc: Leonid.Yegoshin@imgtec.com Cc: Douglas.Leung@imgtec.com Cc: Petar.Jovanovic@imgtec.com Cc: Goran.Ferenc@imgtec.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16511/Signed-off-by:
-
Leonid Yegoshin authored
Disable usage of PREF instruction usage by memcpy for MIPS R6. MIPS R6 redefines PREF instruction with smaller offset than ordinary MIPS. However, the memcpy code uses PREF instruction with offsets bigger than +-256 bytes. Malta kernels already disable usage of PREF for memcpy. This was found during adaptation of MIPS R6 for virtual board used by Android emulator. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by:
-
Miodrag Dinic authored
Add "-modd-spreg" when compiling the kernel for mips32r6 target. This makes sure the kernel builds properly even with toolchains that use "-mno-odd-spreg" by default. This is the case with Android gcc. Prior to this patch, kernel builds using gcc for Android failed with following error messages, if target architecture is set to mips32r6: arch/mips/kernel/r4k_switch.S: Assembler messages: .../r4k_switch.S:210: Error: float register should be even, was 1 .../r4k_switch.S:212: Error: float register should be even, was 3 .../r4k_switch.S:214: Error: float register should be even, was 5 .../r4k_switch.S:216: Error: float register should be even, was 7 .../r4k_switch.S:218: Error: float register should be even, was 9 .../r4k_switch.S:220: Error: float register should be even, was 11 .../r4k_switch.S:222: Error: float register should be even, was 13 .../r4k_switch.S:224: Error: float register should be even, was 15 .../r4k_switch.S:226: Error: float register should be even, was 17 .../r4k_switch.S:228: Error: float register should be even, was 19 .../r4k_switch.S:230: Error: float register should be even, was 21 .../r4k_switch.S:232: Error: float register should be even, was 23 .../r4k_switch.S:234: Error: float register should be even, was 25 .../r4k_switch.S:236: Error: float register should be even, was 27 .../r4k_switch.S:238: Error: float register should be even, was 29 .../r4k_switch.S:240: Error: float register should be even, was 31 make[2]: *** [arch/mips/kernel/r4k_switch.o] Error 1 Signed-off-by:
Aleksandar Markovic <aleksandar.markovic@imgtec.com> Cc: James.Hogan@imgtec.com Cc: Paul.Burton@imgtec.com Cc: Raghu.Gandham@imgtec.com Cc: Leonid.Yegoshin@imgtec.com Cc: Douglas.Leung@imgtec.com Cc: Petar.Jovanovic@imgtec.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16509/Signed-off-by:
-
Miodrag Dinic authored
Implement support for parsing 'memmap' kernel command line parameter. This patch covers parsing of the following two formats for 'memmap' parameter values: - nn[KMG]@ss[KMG] - nn[KMG]$ss[KMG] ([KMG] = K M or G (kilo, mega, giga)) These two allowed formats for parameter value are already documented in file kernel-parameters.txt in Documentation/admin-guide folder. Some architectures already support them, but Mips did not prior to this patch. Excerpt from Documentation/admin-guide/kernel-parameters.txt: memmap=nn[KMG]@ss[KMG] [KNL] Force usage of a specific region of memory. Region of memory to be used is from ss to ss+nn. memmap=nn[KMG]$ss[KMG] Mark specific memory as reserved. Region of memory to be reserved is from ss to ss+nn. Example: Exclude memory from 0x18690000-0x1869ffff memmap=64K$0x18690000 or memmap=0x10000$0x18690000 There is no need to update this documentation file with respect to this patch. Signed-off-by: -
Huacai Chen authored
Sort enum loongson_cpu_type in a more reasonable manner, this makes the CPU names more clear and extensible. Those already defined enum values are renamed to Legacy_* for compatibility. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J . Hill <Steven.Hill@cavium.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16591/Signed-off-by:
-
Huacai Chen authored
With this patch we can set irq affinity via procfs, so as to improve network performance. Signed-off-by:
-
Huacai Chen authored
IRQ0 (HPET), IRQ1 (Keyboard), IRQ2 (Cascade), IRQ7 (SCI), IRQ8 (RTC) and IRQ12 (Mouse) are handled by core-0 locally. Other PCI IRQs (3, 4, 5, 6, 14, 15) are balanced by all cores from Node-0. This can improve I/O performance significantly. Signed-off-by:
-
Huacai Chen authored
Loongson-3 machines may have as many as 4 physical packages. Signed-off-by:
-
Huacai Chen authored
Signed-off-by:
-
- 28 Jun, 2017 7 commits
-
-
Huacai Chen authored
Loongson-3A R3 is very similar to Loongson-3A R2. All Loongson-3 CPU family: Code-name Brand-name PRId Loongson-3A R1 Loongson-3A1000 0x6305 Loongson-3A R2 Loongson-3A2000 0x6308 Loongson-3A R3 Loongson-3A3000 0x6309 Loongson-3B R1 Loongson-3B1000 0x6306 Loongson-3B R2 Loongson-3B1500 0x6307 Signed-off-by:
-
Paul Burton authored
The various interrupt specifiers in the device tree are not in a valid format for the MIPS GIC interrupt controller binding. Where each interrupt should provide 3 values - GIC_LOCAL or GIC_SHARED, the pin number & the type of interrupt - the device tree was only providing the pin number. This causes interrupts for those devices to not be used when a GIC is present. SEAD-3 systems without a GIC are unaffected since the DT fixup code generates interrupt specifiers that are valid for the CPU interrupt controller. Fix this by adding the GIC_SHARED & IRQ_TYPE_LEVEL_HIGH values to each interrupt specifier. Signed-off-by:
-
Paul Burton authored
The SEAD-3 board may be configured with or without a MIPS Global Interrupt Controller (GIC). Because of this we have a device tree with a default case of a GIC present, and code to fixup the device tree based upon a configuration register that indicates the presence of the GIC. In order to keep this DT fixup code simple, the interrupt-parent property was specified at the root node of the SEAD-3 DT, allowing the fixup code to simply change this property to the phandle of the CPU interrupt controller if a GIC is not present & affect all interrupt-using devices at once. This however causes a problem if we do have a GIC & the device tree is used as-is, because the interrupt-parent property of the root node applies to the CPU interrupt controller node. This causes a cycle when of_irq_init() attempts to probe interrupt controllers in order and boots fail due to a lack of configured interrupts, with this message printed on the kernel console: [ 0.000000] OF: of_irq_init: children remain, but no parents Fix this by removing the interrupt-parent property from the DT root node & instead setting it for each device which uses interrupts, ensuring that the CPU interrupt controller node has no interrupt-parent & allowing of_irq_init() to identify it as the root interrupt controller. Signed-off-by:
Keng Koh <keng.koh@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16187/Signed-off-by:
-
Paul Burton authored
Add an entry to MAINTAINERS for the generic platform code, such that relevant people, starting with myself, can be CC'd on patches. Signed-off-by:
-
Paul Burton authored
Drivers for the mc146818 RTC generally check control registers to determine whether a value is encoded as binary or as a binary coded decimal. Setting RTC_ALWAYS_BCD to 1 effectively bypasses these checks and causes drivers to always expect binary coded decimal values, regardless of control register values. This does not seem like a sane default - defaulting to 0 allows the drivers to check control registers to determine encoding type & allows the driver to work generically with both binary & BCD encodings. Set this in mach-generic/mc146818rtc.h such that the generic kernel, or platforms which don't provide a custom mc146818rtc.h, can have an RTC driver which works with both encodings. Signed-off-by:
-
Paul Burton authored
Introduce an apply_mips_fdt_fixups() function which can apply fixups to an FDT based upon an array of fixup descriptions. This abstracts that functionality such that legacy board code can apply FDT fixups without requiring lots of duplication. Signed-off-by:
-
Paul Burton authored
Name aliases in the SEAD-3 device tree serial0 & serial1, rather than uart0 & uart1. This allows the core serial code to make use of the aliases to ensure that the UARTs are consistently numbered as expected rather than having the numbering depend upon probe order. When translating YAMON-provided serial configuration to a device tree stdout-path property adjust accordingly, such that we continue to reference a valid alias. Signed-off-by:
-
