- 24 Mar, 2006 40 commits
-
-
Hans Verkuil authored
Add a new audio mode V4L2_TUNER_MODE_LANG1_LANG2 (used by VIDIOC_G/S_TUNER). This mode allows the user to select both languages of a bilingual transmission, one language on the left, one on the right audio channel. If there is no bilingual transmission, or it is not supported, then this mode should act like V4L2_TUNER_MODE_STEREO. This mode is introduced for PVR-like drivers where it is useful to be able to record both languages of a bilingual broadcast. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
- implement VIDIOC_INT_S_AUDIO_ROUTING for msp3400 and tvaudio - use the new command in bttv, pvrusb2 and em28xx. - remove the now obsolete MSP_SET_MATRIX from msp3400 (yeah!) - remove the obsolete VIDIOC_S_AUDIO from msp3400. Signed-off-by:
-
Hans Verkuil authored
Moved msp3400.h to msp3400-driver.h. Created media/msp3400.h with the new routing defines and lots of comments. Signed-off-by:
-
Hans Verkuil authored
Lots of cleanups: - remove duplicate actions - add D/K3 Dual FM-Stereo and D/K NICAM FM (HDEV3) support - put prescales in the proper place - add missing D/K NICAM - msp34xxg_reset now only resets instead of also starting the autodetect (moved that to msp34xxg_thread) - fix support for SAP. Signed-off-by:
-
Hans Verkuil authored
msp_modus is 'G' model specific. Moved it to kthreads and also added proper handling for the Japanese and South Korean TV standards. Signed-off-by:
-
Hans Verkuil authored
For the new routing implementation it is easier if all the 'normal' scart inputs (IN1-IN4) are consecutive. Signed-off-by:
-
Hans Verkuil authored
Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by:
-
Michael Krufky authored
Only the Medion boxes return 0x08 after an i2c read/write. The bluebird devices do not return anything at all. This patch conditionalizes the test for the 0x08 return code to produce a warning message when using the Medion box, only. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
- corrects the wording in some of the debug messages. Signed-off-by:
-
Michael Krufky authored
Removed the FIXME comment from bluebird_patch_dvico_firmware_download: /* FIXME: are we allowed to change the fw-data ? */ Yes, we are allowed. DViCO's Windows driver also does the same thing. A single firmware image is used to support all of the bluebird boxes. The firmware sets all devices to PID: d700. Instead of using that, the driver replaces the d700 with the cold PID+1 before the download. Signed-off-by:
-
Michael Krufky authored
This patch removes the (harmless) -ETIMEDOUT during device init for the DViCO FusionHDTV Bluebird boxes, by conditionalizing the gpio write inside cxusb_i2c_xfer to happen only for Medion boxes. Signed-off-by:
-
Andrew Morton authored
On ppc64, u64 is `unsigned long' drivers/media/video/v4l2-common.c: In function `v4l_printk_ioctl_arg': drivers/media/video/v4l2-common.c:486: warning: cast from pointer to integer of different size drivers/media/video/v4l2-common.c:580: warning: long long int format, v4l2_std_id arg (arg 8) drivers/media/video/v4l2-common.c:625: warning: long long int format, v4l2_std_id arg (arg 8) drivers/media/video/v4l2-common.c:693: warning: long long int format, v4l2_std_id arg (arg 4) drivers/media/video/v4l2-common.c:910: warning: long long unsigned int format, long unsigned int a$ Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Patrick Boettcher authored
There was no MODULE_DEVICE_TABLE for the b2c2-flexcop-usb module. This makes it impossible for hotplug to load the module automatically, when such a device is connected. Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
I2C_foo were used for some i2c addresses. Bad, since those constants could mean other i2c chip things. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
- Missing a Makefile for bt8xx - rds.h were at wrong directory, since it is a global header for an internal interface - tda7432 and tda9875 were dependent from bttv.h - bttv.h were holding i2c addresses Signed-off-by: -
Manu Abraham authored
Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
The Virtual Video Device Driver (aka vivi) is a device that can be used to: 1) test core v4l functionalities; 2) be a prototype for newer development. Vivi were developed using the best practices for v4l driver. When loaded, it provides a video device that generates a standard color bar, with a timestamp placed at top left corner. Signed-off-by: -
Mauro Carvalho Chehab authored
Video_buf were concerned to allow PCI devices to be used as video capture devices. This patch extends video_buf features by virtualizing pci-dependent functions and allowing other type of devices to use it. It is still DMA centric, although it may be used also by devices that emulates scatter/gather behavior or a DMA device Signed-off-by: -
Horms authored
net: ne2k.c won't compile if pci_clone_list is const f71e1309 which (amongst other things) made pci_clone_list in ne2k-pci.c const causes the following compile error. This patch reverses that portion of that changeset drivers/net/ne2k-pci.c:123: error: pci_clone_list causes a section type conflict ~/ gcc --version gcc (GCC) 4.0.3 (Debian 4.0.3-1) ~/ dpkg gcc-4.0 | grep Version Version: 4.0.3-1 Signed-Off-By: Horms <horms@verge.net.au ne2k-pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) cee0890cc97247b6a9decd94f5dc0719ac8f0b1b Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Andrew Victor authored
This patch adds support for the Ethernet controller integrated in the Atmel AT91RM9200 SoC processor. Changes since the previous submission (01/02/2006) are: - Make use of the clk.h clock infrastructure. - The multicast hash function is not crc32. [Patch by Pedro Perez] Signed-off-by:
Andrew Victor <andrew@sanpeople.com> Signed-off-by:
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] libata: Remove dependence on host_set->dev for SAS [PATCH] libata: ata_scsi_ioctl cleanup [PATCH] libata: ata_scsi_queuecmd cleanup [libata] export ata_dev_pair; trim trailing whitespace [PATCH] libata: add ata_dev_pair helper [PATCH] Make libata not powerdown drivers on PM_EVENT_FREEZE. [PATCH] libata: make ata_set_mode() responsible for failure handling [PATCH] libata: use ata_dev_disable() in ata_bus_probe() [PATCH] libata: implement ata_dev_disable() [PATCH] libata: check if port is disabled after internal command [PATCH] libata: make per-dev transfer mode limits per-dev [PATCH] libata: add per-dev pio/mwdma/udma_mask [PATCH] libata: implement ata_unpack_xfermask() [libata] Move some bmdma-specific code to libata-bmdma.c [libata sata_uli] kill scr_addr abuse [libata sata_nv] eliminate duplicate codepaths with iomap [libata sata_nv] cleanups: convert #defines to enums; remove in-file history [libata sata_sil24] cleanups: use pci_iomap(), kzalloc()
-
Andrew Morton authored
uevent_seqnum and uevent_helper are only defined if CONFIG_HOTPLUG=y, CONFIG_NET=n. (I stole this back from Greg's tree - it makes allnoconfig work). Cc: Greg KH <greg@kroah.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Davi Arnaut authored
Copies user-space string with strndup_user() and moves the type string duplication code to a function (thus fixing a wrong check on the length of the type.) Signed-off-by:
Davi Arnaut <davi.arnaut@gmail.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Davi Arnaut authored
Change hand-coded userspace string copying to strndup_user. Signed-off-by:
-
Davi Arnaut authored
This patch series creates a strndup_user() function to easy copying C strings from userspace. Also we avoid common pitfalls like userspace modifying the final \0 after the strlen_user(). Signed-off-by:
-
Ingo Molnar authored
Make the softlockup detector purely timer-interrupt driven, removing softirq-context (timer) dependencies. This means that if the softlockup watchdog triggers, it has truly observed a longer than 10 seconds scheduling delay of a SCHED_FIFO prio 99 task. (the patch also turns off the softlockup detector during the initial bootup phase and does small style fixes) Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Sergey Vlasov authored
If the change of personality does not lead to change of exec domain, __set_personality() returned without releasing the module reference acquired by lookup_exec_domain(). Signed-off-by:
Sergey Vlasov <vsu@altlinux.ru> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Glauber de Oliveira Costa authored
In filesystems with the meta block group flag on, ext3_bg_num_gdb() fails to report the correct number of blocks used to store the group descriptor backups in a given group. It happens because meta_bg follows a different logic from the original ext3 backup placement in groups multiples of 3, 5 and 7. Signed-off-by:
Glauber de Oliveira Costa <glommer@br.ibm.com> Cc: Andreas Dilger <adilger@clusterfs.com> Cc: "Stephen C. Tweedie" <sct@redhat.com> Cc: Alex Tomas <alex@clusterfs.com> Signed-off-by:
-
Andrew Morton authored
Document the fact that setrlimit(RLIMIT_CPU) doesn't return error codes when it should. I don't think we can fix this without a 2.7.x.. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ulrich Weigand <uweigand@de.ibm.com> Cc: Cliff Wickman <cpw@sgi.com> Signed-off-by:
-
Andrew Morton authored
At present the kernel doesn't honour an attempt to set RLIMIT_CPU to zero seconds. But the spec says it should, and that's what 2.4.x does. Fixing this for real would involve some complexity (such as adding a new it-has-been-set flag to the task_struct, and testing that everwhere, instead of overloading the value of it_prof_expires). Given that a 2.4 kernel won't actually send the signal until one second has expired anyway, let's just handle this case by treating the caller's zero-seconds as one second. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ulrich Weigand <uweigand@de.ibm.com> Cc: Cliff Wickman <cpw@sgi.com> Acked-by:
-
Andrew Morton authored
- Whitespace cleanups - Make that expression comprehensible. There's a potential logic change here: we do the "is it_prof_expires equal to zero" test after converting it to seconds, rather than doing the comparison between raw cputime_t's. But given that it's in units of seconds anyway, that shouldn't change anything. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ulrich Weigand <uweigand@de.ibm.com> Cc: Cliff Wickman <cpw@sgi.com> Signed-off-by:
-
Christoph Hellwig authored
Drivers have no business looking at the task list and thus using this lock. The only possibly modular users left are: arch/ia64/kernel/mca.c drivers/edac/edac_mc.c fs/binfmt_elf.c which I'll send out fixes for soon. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Alan Cox authored
- Remove more unused headers - Remove various typedefs - Correct type of PaddrP (physical addresses should be ulong) - Kill use of bcopy - More printk cleanups - Kill true/false - Clean up direct access to pci BARs Signed-off-by:
-
Alan Cox authored
- Remove more unused headers - Remove various typedefs - Correct type of PaddrP (physical addresses should be ulong) - Kill use of bcopy - More printk cleanups - Kill true/false - Clean up direct access to pci BARs Signed-off-by:
-
