Pull ACPI fix from Rafael Wysocki:
 "Fix the acpi_thermal_add() error path that may do a double-free in
  some cases after recent changes (Dan Carpenter)"

* tag 'acpi-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: thermal: Fix acpi_thermal_unregister_thermal_zone() cleanup

Pull pin control updates from Linus Walleij:
 "No pin control core changes this time.

  New drivers:

   - Realtek RTD family pin control driver and RTD1619B, RTD1319D and
     RTD1315E subdrivers

   - Nuvoton NPCM8xx combined pin control and GPIO driver

   - Amlogic T7 pin control driver

   - Renesas RZ/G3S pin control driver

  Improvements:

   - A number of additional UART groups added to the Mediatek MT7981
     driver

   - MPM pin maps added for Qualcomm MSM8996, SM6115, SM6125 and SDM660

   - Extra GPIO banks for the Sunxi H616

   - MLSP I2C6 function support in Qualcomm MSM8226

   - Some __counted_by() annotations for dynamic arrays

   - Ongoing work to make remove() return void

   - LSBC groups and functions in the Renesas R8A7778"

* tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits)
  pinctrl: Use device_get_match_data()
  dt-bindings: pinctrl: qcom,sa8775p-tlmm: add missing wakeup-parent
  dt-bindings: pinctrl: nuvoton,npcm845: Add missing additionalProperties on gpio child nodes
  dt-bindings: pinctrl: brcm: Ensure all child node properties are documented
  pinctrl: renesas: rzn1: Convert to platform remove callback returning void
  pinctrl: renesas: rzg2l: Add RZ/G3S support
  dt-bindings: pinctrl: renesas: Document RZ/G3S SoC
  pinctrl: renesas: rzg2l: Add support for different DS values on different groups
  pinctrl: renesas: rzg2l: Move DS and OI to SoC-specific configuration
  pinctrl: renesas: rzg2l: Adapt function number for RZ/G3S
  pinctrl: renesas: rzg2l: Adapt for different SD/PWPR register offsets
  pinctrl: renesas: rzg2l: Index all registers based on port offset
  pinctrl: renesas: rzg2l: Add validation of GPIO pin in rzg2l_gpio_request()
  pinctrl: renesas: r8a7778: Add LBSC pins, groups, and functions
  pinctrl: intel: fetch community only when we need it
  pinctrl: cherryview: reduce scope of PIN_CONFIG_BIAS_HIGH_IMPEDANCE case
  pinctrl: cherryview: Convert to platform remove callback returning void
  pinctrl: sprd-sc9860: Convert to platform remove callback returning void
  pinctrl: qcom/msm: Convert to platform remove callback returning void
  pinctrl: qcom/lpi: Convert to platform remove callback returning void
  ...

Pull soundwire updates from Vinod Koul:

 - Core now has improved handling of errors for clock stop

 - Support for qcom v2.0.0 status registers and command ignored
   interrupt and more logging for failures

 - DMI quirk for HP Omen machine

* tag 'soundwire-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: dmi-quirks: update HP Omen match
  soundwire: bus: improve error handling for clock stop prepare/deprepare
  soundwire: qcom: Log clk_get("iface") failures
  soundwire: qcom: handle command ignored interrupt
  soundwire: qcom: use newer link status tregister on v2.0.0

Pull generic phy updates from Vinod Koul:
 "New Support:
   - Qualcomm sa8775p qmp-pcie, IPQ5018, and SC7280 qmp-ufs support
   - Mediatek MT8188 support

  Updates:
   - Device tree device_get_match_data() usage and dropping
     of_match_device() calls
   - Qualcomm qmp usb and combo phy updates for v6 register layout
   - Qualcomm eusb2-repeater updates for tuning overrides, regmap fields
   - STih407 usb binding and ralink usb-phy yaml conversion
   - renesas r8a779f0 serdes init sequencing updates"

* tag 'phy-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (32 commits)
  phy: Remove duplicated include in phy-ralink-usb.c
  phy: Kconfig: Select GENERIC_PHY for GENERIC_PHY_MIPI_DPHY
  phy: qcom-qmp-pcie: add endpoint support for sa8775p
  dt-bindings: phy: ralink-usb-phy: convert to dtschema
  dt-bindings: phy: Convert PXA1928 USB/HSIC PHY to DT schema
  phy: Drop unnecessary of_match_device() calls
  phy: rockchip-inno-usb2: Drop unnecessary DT includes
  phy: Use device_get_match_data()
  phy: realtek: Replace of_device.h with explicit includes
  phy: renesas: r8a779f0-ether-serdes: Add .exit() ops
  phy: renesas: r8a779f0-ether-serdes: Reset in .init()
  phy: qcom-qmp-combo: use v6 registers in v6 regs layout
  phy: qcom-qmp-usb: move PCS v6 register to the proper header
  phy: qcom-qmp-combo: fix the prefix for the PCS_USB v6 registers
  phy: sun4i-usb: update array size
  phy: qualcomm: phy-qcom-eusb2-repeater: Add tuning overrides
  phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs
  phy: qualcomm: phy-qcom-eusb2-repeater: Use regmap_fields
  dt-bindings: phy: qcom,snps-eusb2-repeater: Add magic tuning overrides
  dt-bindings: phy: Add compatible for Mediatek MT8188
  ...

Pull dmaengine updates from Vinod Koul:

 - Big pile of __counted_by attribute annotations to several structures
   for bounds checking of flexible arrays at run-time

 - Another big pile platform remove callback returning void changes

 - Device tree device_get_match_data() usage and dropping
   of_match_device() calls

 - Minor driver updates to pxa, idxd fsl, hisi etc drivers

* tag 'dmaengine-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (106 commits)
  dmaengine: stm32-mdma: correct desc prep when channel running
  dmaengine: dw-axi-dmac: Add support DMAX_NUM_CHANNELS > 16
  dmaengine: xilinx: xilinx_dma: Fix kernel doc about xilinx_dma_remove()
  dmaengine: mmp_tdma: drop unused variable 'of_id'
  MAINTAINERS: Add entries for NXP(Freescale) eDMA drivers
  dmaengine: xilinx: xdma: Support cyclic transfers
  dmaengine: xilinx: xdma: Prepare the introduction of cyclic transfers
  dmaengine: Drop unnecessary of_match_device() calls
  dmaengine: Use device_get_match_data()
  dmaengine: pxa_dma: Annotate struct pxad_desc_sw with __counted_by
  dmaengine: pxa_dma: Remove an erroneous BUG_ON() in pxad_free_desc()
  dmaengine: xilinx: xdma: Use resource_size() in xdma_probe()
  dmaengine: fsl-dpaa2-qdma: Remove redundant initialization owner in dpaa2_qdma_driver
  dmaengine: Remove unused declaration dma_chan_cleanup()
  dmaengine: mmp: fix Wvoid-pointer-to-enum-cast warning
  dmaengine: qcom: fix Wvoid-pointer-to-enum-cast warning
  dmaengine: fsl-edma: Remove redundant dev_err() for platform_get_irq()
  dmaengine: ep93xx_dma: Annotate struct ep93xx_dma_engine with __counted_by
  dmaengine: idxd: add wq driver name support for accel-config user tool
  dmaengine: fsl-edma: Annotate struct struct fsl_edma_engine with __counted_by
  ...

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
  Nothing really major in here, just lots of constant development for
  new hardware. Included in here are:

   - Thunderbolt (i.e. USB4) fixes for reported issues and support for
     new hardware types and devices

   - USB typec additions of new drivers and cleanups for some existing
     ones

   - xhci cleanups and expanded tracing support and some platform
     specific updates

   - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
     spi, and i2c drivers for that type of device (all acked by the
     respective subsystem maintainers.)

   - lots of USB gadget driver updates and cleanups

   - new USB dwc3 platforms supported, as well as other dwc3 fixes and
     cleanups

   - USB chipidea driver updates

   - other smaller driver cleanups and additions, full details in the
     shortlog

  All of these have been in the linux-next tree for a while with no
  reported problems"

* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
  usb: gadget: uvc: Add missing initialization of ssp config descriptor
  usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
  usb: raw-gadget: report suspend, resume, reset, and disconnect events
  usb: raw-gadget: don't disable device if usb_ep_queue fails
  usb: raw-gadget: properly handle interrupted requests
  usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
  usb: gadget: aspeed_udc: Convert to platform remove callback returning void
  dt-bindings: usb: fsa4480: Add compatible for OCP96011
  usb: typec: fsa4480: Add support to swap SBU orientation
  dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
  usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
  Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
  Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
  thunderbolt: Fix one kernel-doc comment
  usb: gadget: f_ncm: Always set current gadget in ncm_bind()
  usb: core: Remove duplicated check in usb_hub_create_port_device
  usb: typec: tcpm: Add additional checks for contaminant
  arm64: dts: rockchip: rk3588s: Add USB3 host controller
  usb: dwc3: add optional PHY interface clocks
  dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
  ...

Pull tty and serial updates from Greg KH:
 "Here is the big set of tty/serial driver changes for 6.7-rc1. Included
  in here are:

   - console/vgacon cleanups and removals from Arnd

   - tty core and n_tty cleanups from Jiri

   - lots of 8250 driver updates and cleanups

   - sc16is7xx serial driver updates

   - dt binding updates

   - first set of port lock wrapers from Thomas for the printk fixes
     coming in future releases

   - other small serial and tty core cleanups and updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
  serdev: Replace custom code with device_match_acpi_handle()
  serdev: Simplify devm_serdev_device_open() function
  serdev: Make use of device_set_node()
  tty: n_gsm: add copyright Siemens Mobility GmbH
  tty: n_gsm: fix race condition in status line change on dead connections
  serial: core: Fix runtime PM handling for pending tx
  vgacon: fix mips/sibyte build regression
  dt-bindings: serial: drop unsupported samsung bindings
  tty: serial: samsung: drop earlycon support for unsupported platforms
  tty: 8250: Add note for PX-835
  tty: 8250: Fix IS-200 PCI ID comment
  tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
  tty: 8250: Add support for Intashield IX cards
  tty: 8250: Add support for additional Brainboxes PX cards
  tty: 8250: Fix up PX-803/PX-857
  tty: 8250: Fix port count of PX-257
  tty: 8250: Add support for Intashield IS-100
  tty: 8250: Add support for Brainboxes UP cards
  tty: 8250: Add support for additional Brainboxes UC cards
  tty: 8250: Remove UC-257 and UC-431
  ...

Pull staging driver updates from Greg KH:
 "Here is the big set of staging driver updates for 6.7-rc1. A bit
  bigger than 6.6 this time around, as it coincided with the Outreachy
  and mentorship application process, so we got a bunch of new
  developers sending in their first changes, which is nice to see.

  Also in here is a removal of the qlge ethernet driver, and the
  rtl8192u wireless driver. Both of these were very old and no one was
  maintaining them, the wireless driver removal was due to no one using
  it anymore, and no hardware to be found, and is part of a larger
  effort to remove unused and old wifi drivers from the system.

  The qlge ethernet driver did have one user pop up after it was
  dropped, and we are working with the network mainainers to figure out
  what tree it will come back in from and who will be responsible for
  it, and if it really is being used or not. Odds are it will show up in
  a network subsystem pull request after -rc1 is out, but we aren't sure
  yet.

  Other smaller changes in here are:

   - Lots of vc04_services work by Umang to clean up the mess created by
     the rpi developers long ago, bringing it almost into good enough
     shape to get out of staging, hopefully next major release, it's
     getting close.

   - rtl8192e variable cleanups and removal of unused code and
     structures

   - vme_user coding style cleanups

   - other small coding style cleanups to lots of the staging drivers

   - octeon typedef removals, and then last-minute revert when it was
     found to break the build in some configurations (it's a hard driver
     to build properly, none of the normal automated testing catches
     it.)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (256 commits)
  Revert "staging: octeon: remove typedef in enum cvmx_spi_mode_t"
  Revert "staging: octeon: remove typedef in enum cvmx_helper_interface_mode_t"
  Revert "staging: octeon: remove typedef in enum cvmx_pow_wait_t"
  Revert "staging: octeon: remove typedef in struct cvmx_pko_lock_t"
  Revert "staging: octeon: remove typedef in enum cvmx_pko_status_t"
  Revert "staging: octeon: remove typedef in structs cvmx_pip_port_status_t and cvmx_pko_port_status_t"
  staging: vt6655: Type encoding info dropped from variable name "byRxRate"
  staging: vt6655: Type encoding info dropped from function name "CARDbUpdateTSF"
  staging: vt6655: Type encoding info dropped from function name "CARDvSetRSPINF"
  staging: vt6655: Type encoding info dropped from function name "CARDbyGetPktType"
  staging: vt6655: Type encoding info dropped from variable name "byPacketType"
  staging: vt6655: Type encoding info dropped from function name "CARDbSetPhyParameter"
  staging: vt6655: Type encoding info dropped from variable name "pbyRsvTime"
  staging: vt6655: Type encoding info dropped from variable name "pbyTxRate"
  staging: vt6655: Type encoding info dropped from function name "s_vCalculateOFDMRParameter"
  staging: vt6655: Type encoding info dropped from array name "cwRXBCNTSFOff"
  staging: fbtft: Convert to platform remove callback returning void
  staging: olpc_dcon: Remove I2C_CLASS_DDC support
  staging: vc04_services: use snprintf instead of sprintf
  staging: rtl8192e: Fix line break issue at priv->rx_buf[priv->rx_idx]
  ...

Pull driver core updates from Greg KH:
 "Here is the set of driver core updates for 6.7-rc1. Nothing major in
  here at all, just a small number of changes including:

   - minor cleanups and updates from Andy Shevchenko

   - __counted_by addition

   - firmware_loader update for aborting loads cleaner

   - other minor changes, details in the shortlog

   - documentation update

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
  firmware_loader: Abort all upcoming firmware load request once reboot triggered
  firmware_loader: Refactor kill_pending_fw_fallback_reqs()
  Documentation: security-bugs.rst: linux-distros relaxed their rules
  driver core: Release all resources during unbind before updating device links
  driver core: class: remove boilerplate code
  driver core: platform: Annotate struct irq_affinity_devres with __counted_by
  resource: Constify resource crosscheck APIs
  resource: Unify next_resource() and next_resource_skip_children()
  resource: Reuse for_each_resource() macro
  PCI: Implement custom llseek for sysfs resource entries
  kernfs: sysfs: support custom llseek method for sysfs entries
  debugfs: Fix __rcu type comparison warning
  device property: Replace custom implementation of COUNT_ARGS()
  drivers: base: test: Make property entry API test modular
  driver core: Add missing parameter description to __fwnode_link_add()
  device property: Clarify usage scope of some struct fwnode_handle members
  devres: rename the first parameter of devm_add_action(_or_reset)
  driver core: platform: Unify the firmware node type check
  driver core: platform: Use temporary variable in platform_device_add()
  driver core: platform: Refactor error path in a couple places
  ...

Pull char/misc updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  changes for 6.7-rc1. Included in here are:

   - IIO subsystem driver updates and additions (largest part of this
     pull request)

   - FPGA subsystem driver updates

   - Counter subsystem driver updates

   - ICC subsystem driver updates

   - extcon subsystem driver updates

   - mei driver updates and additions

   - nvmem subsystem driver updates and additions

   - comedi subsystem dependency fixes

   - parport driver fixups

   - cdx subsystem driver and core updates

   - splice support for /dev/zero and /dev/full

   - other smaller driver cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
  cdx: add sysfs for subsystem, class and revision
  cdx: add sysfs for bus reset
  cdx: add support for bus enable and disable
  cdx: Register cdx bus as a device on cdx subsystem
  cdx: Create symbol namespaces for cdx subsystem
  cdx: Introduce lock to protect controller ops
  cdx: Remove cdx controller list from cdx bus system
  dts: ti: k3-am625-beagleplay: Add beaglecc1352
  greybus: Add BeaglePlay Linux Driver
  dt-bindings: net: Add ti,cc1352p7
  dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
  dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
  Revert "nvmem: add new config option"
  MAINTAINERS: coresight: Add missing Coresight files
  misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
  firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
  uacce: make uacce_class constant
  ocxl: make ocxl_class constant
  cxl: make cxl_class constant
  misc: phantom: make phantom_class constant
  ...

Pull s390 updates from Vasily Gorbik:

 - Get rid of private VM_FAULT flags

 - Add word-at-a-time implementation

 - Add DCACHE_WORD_ACCESS support

 - Cleanup control register handling

 - Disallow CPU hotplug of CPU 0 to simplify its handling complexity,
   following a similar restriction in x86

 - Optimize pai crypto map allocation

 - Update the list of crypto express EP11 coprocessor operation modes

 - Fixes and improvements for secure guests AP pass-through

 - Several fixes to address incorrect page marking for address
   translation with the "cmma no-dat" feature, preventing potential
   incorrect guest TLB flushes

 - Fix early IPI handling

 - Several virtual vs physical address confusion fixes

 - Various small fixes and improvements all over the code

* tag 's390-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (74 commits)
  s390/cio: replace deprecated strncpy with strscpy
  s390/sclp: replace deprecated strncpy with strtomem
  s390/cio: fix virtual vs physical address confusion
  s390/cio: export CMG value as decimal
  s390: delete the unused store_prefix() function
  s390/cmma: fix handling of swapper_pg_dir and invalid_pg_dir
  s390/cmma: fix detection of DAT pages
  s390/sclp: handle default case in sclp memory notifier
  s390/pai_crypto: remove per-cpu variable assignement in event initialization
  s390/pai: initialize event count once at initialization
  s390/pai_crypto: use PERF_ATTACH_TASK define for per task detection
  s390/mm: add missing arch_set_page_dat() call to gmap allocations
  s390/mm: add missing arch_set_page_dat() call to vmem_crst_alloc()
  s390/cmma: fix initial kernel address space page table walk
  s390/diag: add missing virt_to_phys() translation to diag224()
  s390/mm,fault: move VM_FAULT_ERROR handling to do_exception()
  s390/mm,fault: remove VM_FAULT_BADMAP and VM_FAULT_BADACCESS
  s390/mm,fault: remove VM_FAULT_SIGNAL
  s390/mm,fault: remove VM_FAULT_BADCONTEXT
  s390/mm,fault: simplify kfence fault handling
  ...

Pull powerpc updates from Michael Ellerman:

 - Add support for KVM running as a nested hypervisor under development
   versions of PowerVM, using the new PAPR nested virtualisation API

 - Add support for the BPF prog pack allocator

 - A rework of the non-server MMU handling to support execute-only on
   all platforms

 - Some optimisations & cleanups for the powerpc qspinlock code

 - Various other small features and fixes

Thanks to Aboorva Devarajan, Aditya Gupta, Amit Machhiwal, Benjamin
Gray, Christophe Leroy, Dr. David Alan Gilbert, Gaurav Batra, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Julia Lawall, Kautuk Consul, Kuan-Wei Chiu, Michael
Neuling, Minjie Du, Muhammad Muzammil, Naveen N Rao, Nicholas Piggin,
Nick Child, Nysal Jan K.A, Peter Lafreniere, Rob Herring, Sachin Sant,
Sebastian Andrzej Siewior, Shrikanth Hegde, Srikar Dronamraju, Stanislav
Kinsburskii, Vaibhav Jain, Wang Yufen, Yang Yingliang, and Yuan Tan.

* tag 'powerpc-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (100 commits)
  powerpc/vmcore: Add MMU information to vmcoreinfo
  Revert "powerpc: add `cur_cpu_spec` symbol to vmcoreinfo"
  powerpc/bpf: use bpf_jit_binary_pack_[alloc|finalize|free]
  powerpc/bpf: rename powerpc64_jit_data to powerpc_jit_data
  powerpc/bpf: implement bpf_arch_text_invalidate for bpf_prog_pack
  powerpc/bpf: implement bpf_arch_text_copy
  powerpc/code-patching: introduce patch_instructions()
  powerpc/32s: Implement local_flush_tlb_page_psize()
  powerpc/pseries: use kfree_sensitive() in plpks_gen_password()
  powerpc/code-patching: Perform hwsync in __patch_instruction() in case of failure
  powerpc/fsl_msi: Use device_get_match_data()
  powerpc: Remove cpm_dp...() macros
  powerpc/qspinlock: Rename yield_propagate_owner tunable
  powerpc/qspinlock: Propagate sleepy if previous waiter is preempted
  powerpc/qspinlock: don't propagate the not-sleepy state
  powerpc/qspinlock: propagate owner preemptedness rather than CPU number
  powerpc/qspinlock: stop queued waiters trying to set lock sleepy
  powerpc/perf: Fix disabling BHRB and instruction sampling
  powerpc/trace: Add support for HAVE_FUNCTION_ARG_ACCESS_API
  powerpc/tools: Pass -mabi=elfv2 to gcc-check-mprofile-kernel.sh
  ...

Merge tag 'apparmor-pr-2023-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor updates from John Johansen:
 "This adds initial support for mediating io_uring and userns creation.
  Adds a new restriction that tightens the use of change_profile, and a
  couple of optimizations to reduce performance bottle necks that have
  been found when retrieving the current task's secid and allocating
  work buffers.

  The majority of the patch set continues cleaning up and simplifying
  the code (fixing comments, removing now dead functions, and macros
  etc). Finally there are 4 bug fixes, with the regression fix having
  had a couple months of testing.

  Features:
   - optimize retrieving current task secid
   - add base io_uring mediation
   - add base userns mediation
   - improve buffer allocation
   - allow restricting unprivilege change_profile

  Cleanups:
   - Fix kernel doc comments
   - remove unused declarations
   - remove unused functions
   - remove unneeded #ifdef
   - remove unused macros
   - mark fns static
   - cleanup fn with unused return values
   - cleanup audit data
   - pass cred through to audit data
   - refcount the pdb instead of using duplicates
   - make SK_CTX macro an inline fn
   - some comment cleanups

  Bug fixes:
   - fix regression in mount mediation
   - fix invalid refenece
   - use passed in gfp flags
   - advertise avaiability of extended perms and disconnected.path"

* tag 'apparmor-pr-2023-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (39 commits)
  apparmor: Fix some kernel-doc comments
  apparmor: Fix one kernel-doc comment
  apparmor: Fix some kernel-doc comments
  apparmor: mark new functions static
  apparmor: Fix regression in mount mediation
  apparmor: cache buffers on percpu list if there is lock contention
  apparmor: add io_uring mediation
  apparmor: add user namespace creation mediation
  apparmor: allow restricting unprivileged change_profile
  apparmor: advertise disconnected.path is available
  apparmor: refcount the pdb
  apparmor: provide separate audit messages for file and policy checks
  apparmor: pass cred through to audit info.
  apparmor: rename audit_data->label to audit_data->subj_label
  apparmor: combine common_audit_data and apparmor_audit_data
  apparmor: rename SK_CTX() to aa_sock and make it an inline fn
  apparmor: Optimize retrieving current task secid
  apparmor: remove unused functions in policy_ns.c/.h
  apparmor: remove unneeded #ifdef in decompress_zstd()
  apparmor: fix invalid reference on profile->disconnected
  ...

Pull landlock updates from Mickaël Salaün:
 "A Landlock ruleset can now handle two new access rights:
  LANDLOCK_ACCESS_NET_BIND_TCP and LANDLOCK_ACCESS_NET_CONNECT_TCP. When
  handled, the related actions are denied unless explicitly allowed by a
  Landlock network rule for a specific port.

  The related patch series has been reviewed for almost two years, it
  has evolved a lot and we now have reached a decent design, code and
  testing. The refactored kernel code and the new test helpers also
  bring the foundation to support more network protocols.

  Test coverage for security/landlock is 92.4% of 710 lines according to
  gcc/gcov-13, and it was 93.1% of 597 lines before this series. The
  decrease in coverage is due to code refactoring to make the ruleset
  management more generic (i.e. dealing with inodes and ports) that also
  added new WARN_ON_ONCE() checks not possible to test from user space.

  syzkaller has been updated accordingly [4], and such patched instance
  (tailored to Landlock) has been running for a month, covering all the
  new network-related code [5]"

Link: https://lore.kernel.org/r/20231026014751.414649-1-konstantin.meskhidze@huawei.com [1]
Link: https://lore.kernel.org/r/CAHC9VhS1wwgH6NNd+cJz4MYogPiRV8NyPDd1yj5SpaxeUB4UVg@mail.gmail.com [2]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next-history.git/commit/?id=c8dc5ee69d3a [3]
Link: https://github.com/google/syzkaller/pull/4266 [4]
Link: https://storage.googleapis.com/syzbot-assets/82e8608dec36/ci-upstream-linux-next-kasan-gce-root-ab577164.html#security%2flandlock%2fnet.c [5]

* tag 'landlock-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  selftests/landlock: Add tests for FS topology changes with network rules
  landlock: Document network support
  samples/landlock: Support TCP restrictions
  selftests/landlock: Add network tests
  selftests/landlock: Share enforce_ruleset() helper
  landlock: Support network rules with TCP bind and connect
  landlock: Refactor landlock_add_rule() syscall
  landlock: Refactor layer helpers
  landlock: Move and rename layer helpers
  landlock: Refactor merge/inherit_ruleset helpers
  landlock: Refactor landlock_find_rule/insert_rule helpers
  landlock: Allow FS topology changes for domains without such rule type
  landlock: Make ruleset's access masks more generic

Merge tag 'perf-tools-for-v6.7-1-2023-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Namhyung Kim:
 "Build:

   - Compile BPF programs by default if clang (>= 12.0.1) is available
     to enable more features like kernel lock contention, off-cpu
     profiling, kwork, sample filtering and so on.

     This can be disabled by passing BUILD_BPF_SKEL=0 to make.

   - Produce better error messages for bison on debug build (make
     DEBUG=1) by defining YYDEBUG symbol internally.

  perf record:

   - Track sideband events (like FORK/MMAP) from all CPUs even if perf
     record targets a subset of CPUs only (using -C option). Otherwise
     it may lose some information happened on a CPU out of the target
     list.

   - Fix checking raw sched_switch tracepoint argument using system BTF.
     This affects off-cpu profiling which attaches a BPF program to the
     raw tracepoint.

  perf lock contention:

   - Add --lock-cgroup option to see contention by cgroups. This should
     be used with BPF only (using -b option).

       $ sudo perf lock con -ab --lock-cgroup -- sleep 1
        contended   total wait     max wait     avg wait   cgroup

              835     14.06 ms     41.19 us     16.83 us   /system.slice/led.service
               25    122.38 us     13.77 us      4.89 us   /
               44     23.73 us      3.87 us       539 ns   /user.slice/user-657345.slice/session-c4.scope
                1       491 ns       491 ns       491 ns   /system.slice/connectd.service

   - Add -G/--cgroup-filter option to see contention only for given
     cgroups.

     This can be useful when you identified a cgroup in the above
     command and want to investigate more on it. It also works with
     other output options like -t/--threads and -l/--lock-addr.

       $ sudo perf lock con -ab -G /user.slice/user-657345.slice/session-c4.scope -- sleep 1
        contended   total wait     max wait     avg wait         type   caller

                8     77.11 us     17.98 us      9.64 us     spinlock   futex_wake+0xc8
                2     24.56 us     14.66 us     12.28 us     spinlock   tick_do_update_jiffies64+0x25
                1      4.97 us      4.97 us      4.97 us     spinlock   futex_q_lock+0x2a

   - Use per-cpu array for better spinlock tracking. This is to improve
     performance of the BPF program and to avoid nested contention on a
     lock in the BPF hash map.

   - Update callstack check for PowerPC. To find a representative caller
     of a lock, it needs to look up the call stacks. It ends the lookup
     when it sees 0 in the call stack buffer. However, PowerPC call
     stacks can have 0 values in the beginning so skip them when it
     expects valid call stacks after.

  perf kwork:

   - Support 'sched' class (for -k option) so that it can see task
     scheduling event (using sched_switch tracepoint) as well as irq and
     workqueue items.

   - Add perf kwork top subcommand to show more accurate cpu utilization
     with sched class above. It works both with a recorded data (using
     perf kwork record command) and BPF (using -b option). Unlike perf
     top command, it does not support interactive mode (yet).

       $ sudo perf kwork top -b -k sched
       Starting trace, Hit <Ctrl+C> to stop and report
       ^C
       Total  : 160702.425 ms, 8 cpus
       %Cpu(s):  36.00% id,   0.00% hi,   0.00% si
       %Cpu0   [||||||||||||||||||              61.66%]
       %Cpu1   [||||||||||||||||||              61.27%]
       %Cpu2   [|||||||||||||||||||             66.40%]
       %Cpu3   [||||||||||||||||||              61.28%]
       %Cpu4   [||||||||||||||||||              61.82%]
       %Cpu5   [|||||||||||||||||||||||         77.41%]
       %Cpu6   [||||||||||||||||||              61.73%]
       %Cpu7   [||||||||||||||||||              63.25%]

             PID     SPID    %CPU           RUNTIME  COMMMAND
         -------------------------------------------------------------
               0        0   38.72       8089.463 ms  [swapper/1]
               0        0   38.71       8084.547 ms  [swapper/3]
               0        0   38.33       8007.532 ms  [swapper/0]
               0        0   38.26       7992.985 ms  [swapper/6]
               0        0   38.17       7971.865 ms  [swapper/4]
               0        0   36.74       7447.765 ms  [swapper/7]
               0        0   33.59       6486.942 ms  [swapper/2]
               0        0   22.58       3771.268 ms  [swapper/5]
            9545     9351    2.48        447.136 ms  sched-messaging
            9574     9351    2.09        418.583 ms  sched-messaging
            9724     9351    2.05        372.407 ms  sched-messaging
            9531     9351    2.01        368.804 ms  sched-messaging
            9512     9351    2.00        362.250 ms  sched-messaging
            9514     9351    1.95        357.767 ms  sched-messaging
            9538     9351    1.86        384.476 ms  sched-messaging
            9712     9351    1.84        386.490 ms  sched-messaging
            9723     9351    1.83        380.021 ms  sched-messaging
            9722     9351    1.82        382.738 ms  sched-messaging
            9517     9351    1.81        354.794 ms  sched-messaging
            9559     9351    1.79        344.305 ms  sched-messaging
            9725     9351    1.77        365.315 ms  sched-messaging
       <SNIP>

   - Add hard/soft-irq statistics to perf kwork top. This will show the
     total CPU utilization with IRQ stats like below:

       $ sudo perf kwork top -b -k sched,irq,softirq
       Starting trace, Hit <Ctrl+C> to stop and report
       ^C
       Total  :  12554.889 ms, 8 cpus
       %Cpu(s):  96.23% id,   0.10% hi,   0.19% si      <---- here
       %Cpu0   [|                                4.60%]
       %Cpu1   [|                                4.59%]
       %Cpu2   [                                 2.73%]
       %Cpu3   [|                                3.81%]
       <SNIP>

  perf bench:

   - Add -G/--cgroups option to perf bench sched pipe. The pipe bench is
     good to measure context switch overhead. With this option, it puts
     the reader and writer tasks in separate cgroups to enforce context
     switch between two different cgroups.

     Also it needs to set CPU affinity of the tasks in a CPU to
     accurately measure the impact of cgroup context switches.

       $ sudo perf stat -e context-switches,cgroup-switches -- \
       > taskset -c 0 perf bench sched pipe -l 100000
       # Running 'sched/pipe' benchmark:
       # Executed 100000 pipe operations between two processes

            Total time: 0.307 [sec]

              3.078180 usecs/op
                324867 ops/sec

        Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 100000':

                  200,026      context-switches
                       63      cgroup-switches

              0.321637922 seconds time elapsed

     You can see small number of cgroup-switches because both write and
     read tasks are in the same cgroup.

       $ sudo mkdir /sys/fs/cgroup/{AAA,BBB}

       $ sudo perf stat -e context-switches,cgroup-switches -- \
       > taskset -c 0 perf bench sched pipe -l 100000 -G AAA,BBB
       # Running 'sched/pipe' benchmark:
       # Executed 100000 pipe operations between two processes

            Total time: 0.351 [sec]

              3.512990 usecs/op
                284657 ops/sec

        Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 100000 -G AAA,BBB':

                  200,020      context-switches
                  200,019      cgroup-switches

              0.365034567 seconds time elapsed

     Now context-switches and cgroup-switches are almost same. And you
     can see the pipe operation took little more.

   - Kill child processes when perf bench sched messaging exited
     abnormally. Otherwise it'd leave the child doing unnecessary work.

  perf test:

   - Fix various shellcheck issues on the tests written in shell script.

   - Skip tests when condition is not satisfied:
      - object code reading test for non-text section addresses.
      - CoreSight test if cs_etm// event is not available.
      - lock contention test if not enough CPUs.

  Event parsing:

   - Make PMU alias name loading lazy to reduce the startup time in the
     event parsing code for perf record, stat and others in the general
     case.

   - Lazily compute PMU default config. In the same sense, delay PMU
     initialization until it's really needed to reduce the startup cost.

   - Fix event term values that are raw events. The event specification
     can have several terms including event name. But sometimes it
     clashes with raw event encoding which starts with 'r' and has
     hex-digits.

     For example, an event named 'read' should be processed as a normal
     event but it was mis-treated as a raw encoding and caused a
     failure.

       $ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
       event syntax error: '..nning/event=read/'
                                         \___ parser error
       Run 'perf list' for a list of valid events

        Usage: perf stat [<options>] [<command>]

           -e, --event <event> event selector. use 'perf list' to list available events

  Event metrics:

   - Add "Compat" regex to match event with multiple identifiers.

   - Usual updates for Intel, Power10, Arm telemetry/CMN and AmpereOne.

  Misc:

   - Assorted memory leak fixes and footprint reduction.

   - Add "bpf_skeletons" to perf version --build-options so that users
     can check whether their perf tools have BPF support easily.

   - Fix unaligned access in Intel-PT packet decoder found by
     undefined-behavior sanitizer.

   - Avoid frequency mode for the dummy event. Surprisingly it'd impact
     kernel timer tick handler performance by force iterating all PMU
     events.

   - Update bash shell completion for events and metrics"

* tag 'perf-tools-for-v6.7-1-2023-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (187 commits)
  perf vendor events intel: Update tsx_cycles_per_elision metrics
  perf vendor events intel: Update bonnell version number to v5
  perf vendor events intel: Update westmereex events to v4
  perf vendor events intel: Update meteorlake events to v1.06
  perf vendor events intel: Update knightslanding events to v16
  perf vendor events intel: Add typo fix for ivybridge FP
  perf vendor events intel: Update a spelling in haswell/haswellx
  perf vendor events intel: Update emeraldrapids to v1.01
  perf vendor events intel: Update alderlake/alderlake events to v1.23
  perf build: Disable BPF skeletons if clang version is < 12.0.1
  perf callchain: Fix spelling mistake "statisitcs" -> "statistics"
  perf report: Fix spelling mistake "heirachy" -> "hierarchy"
  perf python: Fix binding linkage due to rename and move of evsel__increase_rlimit()
  perf tests: test_arm_coresight: Simplify source iteration
  perf vendor events intel: Add tigerlake two metrics
  perf vendor events intel: Add broadwellde two metrics
  perf vendor events intel: Fix broadwellde tma_info_system_dram_bw_use metric
  perf mem_info: Add and use map_symbol__exit and addr_map_symbol__exit
  perf callchain: Minor layout changes to callchain_list
  perf callchain: Make brtype_stat in callchain_list optional
  ...

Pull tracing updates from Steven Rostedt:

 - Remove eventfs_file descriptor

   This is the biggest change, and the second part of making eventfs
   create its files dynamically.

   In 6.6 the first part was added, and that maintained a one to one
   mapping between eventfs meta descriptors and the directories and file
   inodes and dentries that were dynamically created. The directories
   were represented by a eventfs_inode and the files were represented by
   a eventfs_file.

   In v6.7 the eventfs_file is removed. As all events have the same
   directory make up (sched_switch has an "enable", "id", "format", etc
   files), the handing of what files are underneath each leaf eventfs
   directory is moved back to the tracing subsystem via a callback.

   When an event is added to the eventfs, it registers an array of
   evenfs_entry's. These hold the names of the files and the callbacks
   to call when the file is referenced. The callback gets the name so
   that the same callback may be used by multiple files. The callback
   then supplies the filesystem_operations structure needed to create
   this file.

   This has brought the memory footprint of creating multiple eventfs
   instances down by 2 megs each!

 - User events now has persistent events that are not associated to a
   single processes. These are privileged events that hang around even
   if no process is attached to them

 - Clean up of seq_buf

   There's talk about using seq_buf more to replace strscpy() and
   friends. But this also requires some minor modifications of seq_buf
   to be able to do this

 - Expand instance ring buffers individually

   Currently if boot up creates an instance, and a trace event is
   enabled on that instance, the ring buffer for that instance and the
   top level ring buffer are expanded (1.4 MB per CPU). This wastes
   memory as this happens when nothing is using the top level instance

 - Other minor clean ups and fixes

* tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits)
  seq_buf: Export seq_buf_puts()
  seq_buf: Export seq_buf_putc()
  eventfs: Use simple_recursive_removal() to clean up dentries
  eventfs: Remove special processing of dput() of events directory
  eventfs: Delete eventfs_inode when the last dentry is freed
  eventfs: Hold eventfs_mutex when calling callback functions
  eventfs: Save ownership and mode
  eventfs: Test for ei->is_freed when accessing ei->dentry
  eventfs: Have a free_ei() that just frees the eventfs_inode
  eventfs: Remove "is_freed" union with rcu head
  eventfs: Fix kerneldoc of eventfs_remove_rec()
  tracing: Have the user copy of synthetic event address use correct context
  eventfs: Remove extra dget() in eventfs_create_events_dir()
  tracing: Have trace_event_file have ref counters
  seq_buf: Introduce DECLARE_SEQ_BUF and seq_buf_str()
  eventfs: Fix typo in eventfs_inode union comment
  eventfs: Fix WARN_ON() in create_file_dentry()
  powerpc: Remove initialisation of readpos
  tracing/histograms: Simplify last_cmd_set()
  seq_buf: fix a misleading comment
  ...

Pull tracing tools updates from Steven Rostedt:
 "RTLA:

   - In rtla/utils.c, initialize the 'found' variable to avoid garbage
     when a mount point is not found.

 Verification:

   - Remove duplicated imports on dot2k python script"

* tag 'trace-tools-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  rtla: Fix uninitialized variable found
  verification/dot2k: Delete duplicate imports

Pull printk updates from Petr Mladek:

 - Another preparation step for introducing printk kthreads. The main
   piece is a per-console lock with several features:

    - Support three priorities: normal, emergency, and panic. They will
      be defined by a context where the lock is taken. A context with a
      higher priority is allowed to take over the lock from a context
      with a lower one.

      The plan is to use the emergency context for Oops and WARN()
      messages, and also by watchdogs.

      The panic() context will be used on panic CPU.

    - The owner might enter/exit regions where it is not safe to take
      over the lock. It allows the take over the lock a safe way in the
      middle of a message.

      For example, serial drivers emit characters one by one. And the
      serial port is in a safe state in between.

      Only the final console_flush_in_panic() will be allowed to take
      over the lock even in the unsafe state (last chance, pray, and
      hope).

    - A higher priority context might busy wait with a timeout. The
      current owner is informed about the waiter and releases the lock
      on exit from the unsafe state.

    - The new lock is safe even in atomic contexts, including NMI.

   Another change is a safe manipulation of per-console sequence number
   counter under the new lock.

 - simple_strntoull() micro-optimization

 - Reduce pr_flush() pooling time.

 - Calm down false warning about possible buffer invalid access to
   console buffers when CONFIG_PRINTK is disabled.

[ .. and Thomas Gleixner wants to point out that while several of the
  commits are attributed to him, he only authored the early versions of
  said commits, and that John Ogness and Petr Mladek have been the ones
  who sorted out the details and really should be those who get the
  credit   - Linus ]

* tag 'printk-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  vsprintf: uninline simple_strntoull(), reorder arguments
  printk: printk: Remove unnecessary statements＇len = 0;＇
  printk: Reduce pr_flush() pooling time
  printk: fix illegal pbufs access for !CONFIG_PRINTK
  printk: nbcon: Allow drivers to mark unsafe regions and check state
  printk: nbcon: Add emit function and callback function for atomic printing
  printk: nbcon: Add sequence handling
  printk: nbcon: Add ownership state functions
  printk: nbcon: Add buffer management
  printk: Make static printk buffers available to nbcon
  printk: nbcon: Add acquire/release logic
  printk: Add non-BKL (nbcon) console basic infrastructure

Merge tag 'livepatching-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching update from Petr Mladek:

 - Add missing newline character to avoid waiting for a continuous
   message

* tag 'livepatching-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Fix missing newline character in klp_resolve_symbols()

Pull bitmap updates from Yury Norov:
 "This includes the 'bitmap: cleanup bitmap_*_region() implementation'
  series, and scattered cleanup patches"

* tag 'bitmap-for-6.7' of https://github.com/norov/linux:
  buildid: reduce header file dependencies for module
  bitmap: move bitmap_*_region() functions to bitmap.h
  bitmap: drop _reg_op() function
  bitmap: replace _reg_op(REG_OP_ISFREE) with find_next_bit()
  bitmap: replace _reg_op(REG_OP_RELEASE) with bitmap_clear()
  bitmap: replace _reg_op(REG_OP_ALLOC) with bitmap_set()
  bitmap: fix opencoded bitmap_allocate_region()
  bitmap: add test for bitmap_*_region() functions
  bitmap: align __reg_op() wrappers with modern coding style
  lib/bitmap: split-out string-related operations to a separate files
  bitmap: Remove dead code, i.e. bitmap_copy_le()
  bitmap: Fix a typo ("identify map")
  cpumask: kernel-doc cleanups and additions

Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:
 "As usual, lots of singleton and doubleton patches all over the tree
  and there's little I can say which isn't in the individual changelogs.

  The lengthier patch series are

   - 'kdump: use generic functions to simplify crashkernel reservation
     in arch', from Baoquan He. This is mainly cleanups and
     consolidation of the 'crashkernel=' kernel parameter handling

   - After much discussion, David Laight's 'minmax: Relax type checks in
     min() and max()' is here. Hopefully reduces some typecasting and
     the use of min_t() and max_t()

   - A group of patches from Oleg Nesterov which clean up and slightly
     fix our handling of reads from /proc/PID/task/... and which remove
     task_struct.thread_group"

* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
  scripts/gdb/vmalloc: disable on no-MMU
  scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
  .mailmap: add address mapping for Tomeu Vizoso
  mailmap: update email address for Claudiu Beznea
  tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
  .mailmap: map Benjamin Poirier's address
  scripts/gdb: add lx_current support for riscv
  ocfs2: fix a spelling typo in comment
  proc: test ProtectionKey in proc-empty-vm test
  proc: fix proc-empty-vm test with vsyscall
  fs/proc/base.c: remove unneeded semicolon
  do_io_accounting: use sig->stats_lock
  do_io_accounting: use __for_each_thread()
  ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
  ocfs2: fix a typo in a comment
  scripts/show_delta: add __main__ judgement before main code
  treewide: mark stuff as __ro_after_init
  fs: ocfs2: check status values
  proc: test /proc/${pid}/statm
  compiler.h: move __is_constexpr() to compiler.h
  ...

Pull MM updates from Andrew Morton:
 "Many singleton patches against the MM code. The patch series which are
  included in this merge do the following:

   - Kemeng Shi has contributed some compation maintenance work in the
     series 'Fixes and cleanups to compaction'

   - Joel Fernandes has a patchset ('Optimize mremap during mutual
     alignment within PMD') which fixes an obscure issue with mremap()'s
     pagetable handling during a subsequent exec(), based upon an
     implementation which Linus suggested

   - More DAMON/DAMOS maintenance and feature work from SeongJae Park i
     the following patch series:

	mm/damon: misc fixups for documents, comments and its tracepoint
	mm/damon: add a tracepoint for damos apply target regions
	mm/damon: provide pseudo-moving sum based access rate
	mm/damon: implement DAMOS apply intervals
	mm/damon/core-test: Fix memory leaks in core-test
	mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval

   - In the series 'Do not try to access unaccepted memory' Adrian
     Hunter provides some fixups for the recently-added 'unaccepted
     memory' feature. To increase the feature's checking coverage. 'Plug
     a few gaps where RAM is exposed without checking if it is
     unaccepted memory'

   - In the series 'cleanups for lockless slab shrink' Qi Zheng has done
     some maintenance work which is preparation for the lockless slab
     shrinking code

   - Qi Zheng has redone the earlier (and reverted) attempt to make slab
     shrinking lockless in the series 'use refcount+RCU method to
     implement lockless slab shrink'

   - David Hildenbrand contributes some maintenance work for the rmap
     code in the series 'Anon rmap cleanups'

   - Kefeng Wang does more folio conversions and some maintenance work
     in the migration code. Series 'mm: migrate: more folio conversion
     and unification'

   - Matthew Wilcox has fixed an issue in the buffer_head code which was
     causing long stalls under some heavy memory/IO loads. Some cleanups
     were added on the way. Series 'Add and use bdev_getblk()'

   - In the series 'Use nth_page() in place of direct struct page
     manipulation' Zi Yan has fixed a potential issue with the direct
     manipulation of hugetlb page frames

   - In the series 'mm: hugetlb: Skip initialization of gigantic tail
     struct pages if freed by HVO' has improved our handling of gigantic
     pages in the hugetlb vmmemmep optimizaton code. This provides
     significant boot time improvements when significant amounts of
     gigantic pages are in use

   - Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
     rationalization and folio conversions in the hugetlb code

   - Yin Fengwei has improved mlock()'s handling of large folios in the
     series 'support large folio for mlock'

   - In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
     added statistics for memcg v1 users which are available (and
     useful) under memcg v2

   - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
     prctl so that userspace may direct the kernel to not automatically
     propagate the denial to child processes. The series is named 'MDWE
     without inheritance'

   - Kefeng Wang has provided the series 'mm: convert numa balancing
     functions to use a folio' which does what it says

   - In the series 'mm/ksm: add fork-exec support for prctl' Stefan
     Roesch makes is possible for a process to propagate KSM treatment
     across exec()

   - Huang Ying has enhanced memory tiering's calculation of memory
     distances. This is used to permit the dax/kmem driver to use 'high
     bandwidth memory' in addition to Optane Data Center Persistent
     Memory Modules (DCPMM). The series is named 'memory tiering:
     calculate abstract distance based on ACPI HMAT'

   - In the series 'Smart scanning mode for KSM' Stefan Roesch has
     optimized KSM by teaching it to retain and use some historical
     information from previous scans

   - Yosry Ahmed has fixed some inconsistencies in memcg statistics in
     the series 'mm: memcg: fix tracking of pending stats updates
     values'

   - In the series 'Implement IOCTL to get and optionally clear info
     about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
     which permits us to atomically read-then-clear page softdirty
     state. This is mainly used by CRIU

   - Hugh Dickins contributed the series 'shmem,tmpfs: general
     maintenance', a bunch of relatively minor maintenance tweaks to
     this code

   - Matthew Wilcox has increased the use of the VMA lock over
     file-backed page faults in the series 'Handle more faults under the
     VMA lock'. Some rationalizations of the fault path became possible
     as a result

   - In the series 'mm/rmap: convert page_move_anon_rmap() to
     folio_move_anon_rmap()' David Hildenbrand has implemented some
     cleanups and folio conversions

   - In the series 'various improvements to the GUP interface' Lorenzo
     Stoakes has simplified and improved the GUP interface with an eye
     to providing groundwork for future improvements

   - Andrey Konovalov has sent along the series 'kasan: assorted fixes
     and improvements' which does those things

   - Some page allocator maintenance work from Kemeng Shi in the series
     'Two minor cleanups to break_down_buddy_pages'

   - In thes series 'New selftest for mm' Breno Leitao has developed
     another MM self test which tickles a race we had between madvise()
     and page faults

   - In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
     and an optimization to the core pagecache code

   - Nhat Pham has added memcg accounting for hugetlb memory in the
     series 'hugetlb memcg accounting'

   - Cleanups and rationalizations to the pagemap code from Lorenzo
     Stoakes, in the series 'Abstract vma_merge() and split_vma()'

   - Audra Mitchell has fixed issues in the procfs page_owner code's new
     timestamping feature which was causing some misbehaviours. In the
     series 'Fix page_owner's use of free timestamps'

   - Lorenzo Stoakes has fixed the handling of new mappings of sealed
     files in the series 'permit write-sealed memfd read-only shared
     mappings'

   - Mike Kravetz has optimized the hugetlb vmemmap optimization in the
     series 'Batch hugetlb vmemmap modification operations'

   - Some buffer_head folio conversions and cleanups from Matthew Wilcox
     in the series 'Finish the create_empty_buffers() transition'

   - As a page allocator performance optimization Huang Ying has added
     automatic tuning to the allocator's per-cpu-pages feature, in the
     series 'mm: PCP high auto-tuning'

   - Roman Gushchin has contributed the patchset 'mm: improve
     performance of accounted kernel memory allocations' which improves
     their performance by ~30% as measured by a micro-benchmark

   - folio conversions from Kefeng Wang in the series 'mm: convert page
     cpupid functions to folios'

   - Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
     kmemleak'

   - Qi Zheng has improved our handling of memoryless nodes by keeping
     them off the allocation fallback list. This is done in the series
     'handle memoryless nodes more appropriately'

   - khugepaged conversions from Vishal Moola in the series 'Some
     khugepaged folio conversions'"

[ bcachefs conflicts with the dynamically allocated shrinkers have been
  resolved as per Stephen Rothwell in

     https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/

  with help from Qi Zheng.

  The clone3 test filtering conflict was half-arsed by yours truly ]

* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
  mm/damon/sysfs: update monitoring target regions for online input commit
  mm/damon/sysfs: remove requested targets when online-commit inputs
  selftests: add a sanity check for zswap
  Documentation: maple_tree: fix word spelling error
  mm/vmalloc: fix the unchecked dereference warning in vread_iter()
  zswap: export compression failure stats
  Documentation: ubsan: drop "the" from article title
  mempolicy: migration attempt to match interleave nodes
  mempolicy: mmap_lock is not needed while migrating folios
  mempolicy: alloc_pages_mpol() for NUMA policy without vma
  mm: add page_rmappable_folio() wrapper
  mempolicy: remove confusing MPOL_MF_LAZY dead code
  mempolicy: mpol_shared_policy_init() without pseudo-vma
  mempolicy trivia: use pgoff_t in shared mempolicy tree
  mempolicy trivia: slightly more consistent naming
  mempolicy trivia: delete those ancient pr_debug()s
  mempolicy: fix migrate_pages(2) syscall return nr_failed
  kernfs: drop shared NUMA mempolicy hooks
  hugetlbfs: drop shared NUMA mempolicy pretence
  mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - Add virtual-address based lskcipher interface
   - Optimise ahash/shash performance in light of costly indirect calls
   - Remove ahash alignmask attribute

  Algorithms:
   - Improve AES/XTS performance of 6-way unrolling for ppc
   - Remove some uses of obsolete algorithms (md4, md5, sha1)
   - Add FIPS 202 SHA-3 support in pkcs1pad
   - Add fast path for single-page messages in adiantum
   - Remove zlib-deflate

  Drivers:
   - Add support for S4 in meson RNG driver
   - Add STM32MP13x support in stm32
   - Add hwrng interface support in qcom-rng
   - Add support for deflate algorithm in hisilicon/zip"

* tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits)
  crypto: adiantum - flush destination page before unmapping
  crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place
  Documentation/module-signing.txt: bring up to date
  module: enable automatic module signing with FIPS 202 SHA-3
  crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
  crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support
  crypto: FIPS 202 SHA-3 register in hash info for IMA
  x509: Add OIDs for FIPS 202 SHA-3 hash and signatures
  crypto: ahash - optimize performance when wrapping shash
  crypto: ahash - check for shash type instead of not ahash type
  crypto: hash - move "ahash wrapping shash" functions to ahash.c
  crypto: talitos - stop using crypto_ahash::init
  crypto: chelsio - stop using crypto_ahash::init
  crypto: ahash - improve file comment
  crypto: ahash - remove struct ahash_request_priv
  crypto: ahash - remove crypto_ahash_alignmask
  crypto: gcm - stop using alignmask of ahash
  crypto: chacha20poly1305 - stop using alignmask of ahash
  crypto: ccm - stop using alignmask of ahash
  net: ipv6: stop checking crypto_ahash_alignmask
  ...

Pull kvm updates from Paolo Bonzini:
 "ARM:

   - Generalized infrastructure for 'writable' ID registers, effectively
     allowing userspace to opt-out of certain vCPU features for its
     guest

   - Optimization for vSGI injection, opportunistically compressing
     MPIDR to vCPU mapping into a table

   - Improvements to KVM's PMU emulation, allowing userspace to select
     the number of PMCs available to a VM

   - Guest support for memory operation instructions (FEAT_MOPS)

   - Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
     bugs and getting rid of useless code

   - Changes to the way the SMCCC filter is constructed, avoiding wasted
     memory allocations when not in use

   - Load the stage-2 MMU context at vcpu_load() for VHE systems,
     reducing the overhead of errata mitigations

   - Miscellaneous kernel and selftest fixes

  LoongArch:

   - New architecture for kvm.

     The hardware uses the same model as x86, s390 and RISC-V, where
     guest/host mode is orthogonal to supervisor/user mode. The
     virtualization extensions are very similar to MIPS, therefore the
     code also has some similarities but it's been cleaned up to avoid
     some of the historical bogosities that are found in arch/mips. The
     kernel emulates MMU, timer and CSR accesses, while interrupt
     controllers are only emulated in userspace, at least for now.

  RISC-V:

   - Support for the Smstateen and Zicond extensions

   - Support for virtualizing senvcfg

   - Support for virtualized SBI debug console (DBCN)

  S390:

   - Nested page table management can be monitored through tracepoints
     and statistics

  x86:

   - Fix incorrect handling of VMX posted interrupt descriptor in
     KVM_SET_LAPIC, which could result in a dropped timer IRQ

   - Avoid WARN on systems with Intel IPI virtualization

   - Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs
     without forcing more common use cases to eat the extra memory
     overhead.

   - Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
     SBPB, aka Selective Branch Predictor Barrier).

   - Fix a bug where restoring a vCPU snapshot that was taken within 1
     second of creating the original vCPU would cause KVM to try to
     synchronize the vCPU's TSC and thus clobber the correct TSC being
     set by userspace.

   - Compute guest wall clock using a single TSC read to avoid
     generating an inaccurate time, e.g. if the vCPU is preempted
     between multiple TSC reads.

   - "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which
     complain about a "Firmware Bug" if the bit isn't set for select
     F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to
     appease Windows Server 2022.

   - Don't apply side effects to Hyper-V's synthetic timer on writes
     from userspace to fix an issue where the auto-enable behavior can
     trigger spurious interrupts, i.e. do auto-enabling only for guest
     writes.

   - Remove an unnecessary kick of all vCPUs when synchronizing the
     dirty log without PML enabled.

   - Advertise "support" for non-serializing FS/GS base MSR writes as
     appropriate.

   - Harden the fast page fault path to guard against encountering an
     invalid root when walking SPTEs.

   - Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.

   - Use the fast path directly from the timer callback when delivering
     Xen timer events, instead of waiting for the next iteration of the
     run loop. This was not done so far because previously proposed code
     had races, but now care is taken to stop the hrtimer at critical
     points such as restarting the timer or saving the timer information
     for userspace.

   - Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future
     flag.

   - Optimize injection of PMU interrupts that are simultaneous with
     NMIs.

   - Usual handful of fixes for typos and other warts.

  x86 - MTRR/PAT fixes and optimizations:

   - Clean up code that deals with honoring guest MTRRs when the VM has
     non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.

   - Zap EPT entries when non-coherent DMA assignment stops/start to
     prevent using stale entries with the wrong memtype.

   - Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y

     This was done as a workaround for virtual machine BIOSes that did
     not bother to clear CR0.CD (because ancient KVM/QEMU did not bother
     to set it, in turn), and there's zero reason to extend the quirk to
     also ignore guest PAT.

  x86 - SEV fixes:

   - Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts
     SHUTDOWN while running an SEV-ES guest.

   - Clean up the recognition of emulation failures on SEV guests, when
     KVM would like to "skip" the instruction but it had already been
     partially emulated. This makes it possible to drop a hack that
     second guessed the (insufficient) information provided by the
     emulator, and just do the right thing.

  Documentation:

   - Various updates and fixes, mostly for x86

   - MTRR and PAT fixes and optimizations"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits)
  KVM: selftests: Avoid using forced target for generating arm64 headers
  tools headers arm64: Fix references to top srcdir in Makefile
  KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
  KVM: arm64: selftest: Perform ISB before reading PAR_EL1
  KVM: arm64: selftest: Add the missing .guest_prepare()
  KVM: arm64: Always invalidate TLB for stage-2 permission faults
  KVM: x86: Service NMI requests after PMI requests in VM-Enter path
  KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
  KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
  KVM: arm64: Refine _EL2 system register list that require trap reinjection
  arm64: Add missing _EL2 encodings
  arm64: Add missing _EL12 encodings
  KVM: selftests: aarch64: vPMU test for validating user accesses
  KVM: selftests: aarch64: vPMU register test for unimplemented counters
  KVM: selftests: aarch64: vPMU register test for implemented counters
  KVM: selftests: aarch64: Introduce vpmu_counter_access test
  tools: Import arm_pmuv3.h
  KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
  KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
  KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
  ...

Pull sh updates from John Paul Adrian Glaubitz:
 "While the previously announced patch series for converting arch/sh to
  device trees is not yet ready for inclusion to mainline and therefore
  didn't make it for this pull request, there are still a small number
  changes for v6.7 which include one platform (board plus CPU and driver
  code) removal plus two fixes.

  The removal sent in by Arnd Bergmann concerns the microdev board which
  was an early SuperH prototype board that was never used in production.
  With the board removed, we were able to drop the now unused code for
  the SH4-202 CPU and well as the driver code for the superhyway bus and
  a custom implementation for ioport_map() and ioport_unmap() which will
  allow us to simplify ioport handling in the future.

  Another patch set by Geert Uytterhoeven revives SuperH BIOS
  earlyprintk support which got accidentally disabled in
  e76fe574 ("sh: Remove old early serial console code V2"), the
  second patch in the series updates the documentation.

  Finally, a patch by Masami Hiramatsu fixes a regression reported by
  the kernel test robot which uncovered that arch/sh is not implementing
  arch_cmpxchg_local() and therefore needs use __generic_cmpxchg_local()
  instead"

* tag 'sh-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  locking/atomic: sh: Use generic_cmpxchg_local for arch_cmpxchg_local()
  Documentation: kernel-parameters: Add earlyprintk=bios on SH
  sh: bios: Revive earlyprintk support
  sh: machvec: Remove custom ioport_{un,}map()
  sh: Remove superhyway bus support
  sh: Remove unused SH4-202 support
  sh: Remove stale microdev board

Pull ARM updates from Russell King:

 - fix some kernel-doc warnings

 - fix stack depot IRQ stack filter

 - cast memset() byte to unsigned char

 - explicitly include correct DI includes

 - fix ARCH_LOW_ADDRESS_LIMIT with CONFIG_ZONE_DMA

 - fix get_user() problems when linker uses a veneer

 - make including linux/uaccess.h self-contained on ARM

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9326/1: make <linux/uaccess.h> self-contained for ARM
  ARM: 9324/1: fix get_user() broken with veneer
  ARM: 9323/1: mm: Fix ARCH_LOW_ADDRESS_LIMIT when CONFIG_ZONE_DMA
  ARM: 9322/1: Explicitly include correct DT includes
  ARM: 9321/1: memset: cast the constant byte to unsigned char
  ARM: 9320/1: fix stack depot IRQ stack filter
  ARM: 9319/1: sa1111: fix sa1111_probe kernel-doc warnings

Pull m68knommu updates from Greg Ungerer:
 "A few changes, most of them related to fixing warnings when compiling
  with "W=1". These follow up Geert's recent changes for M68K for this
  too. These ones complete the fixes for the nommu and ColdFire specific
  code.

  Also a couple of other fixes to improve ROM default addressing and
  compiling for the Cleopatra boards.

  Summary:

   - improve default Kconfig ROM section settings

   - fix compilation for some Cleopatra boards

   - fixes and cleanups for warnings compiling with 'W=1'"

* tag 'm68knommu-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: 68000: fix warning in timer code
  m68k: 68000: fix warnings in 68000 interrupt handling
  m68k: coldfire: remove unused variable in MMU code
  m68k: coldfire: fix warnings in uboot argument processing
  m68k: coldfire: make mcf_maskimr() static
  m68k: coldfire: ensure gpio prototypes visible
  m68k: coldfire: add and use "vectors.h"
  m68knommu: fix compilation for ColdFire/Cleopatra boards
  m68knommu: improve config ROM setting defaults

Pull rdma updates from Jason Gunthorpe:
 "Nothing exciting this cycle, most of the diffstat is changing SPDX
  'or' to 'OR'.

  Summary:

   - Bugfixes for hns, mlx5, and hfi1

   - Hardening patches for size_*, counted_by, strscpy

   - rts fixes from static analysis

   - Dump SRQ objects in rdma netlink, with hns support

   - Fix a performance regression in mlx5 MR deregistration

   - New XDR (200Gb/lane) link speed

   - SRQ record doorbell latency optimization for hns

   - IPSEC support for mlx5 multi-port mode

   - ibv_rereg_mr() support for irdma

   - Affiliated event support for bnxt_re

   - Opt out for the spec compliant qkey security enforcement as we
     discovered SW that breaks under enforcement

   - Comment and trivial updates"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (50 commits)
  IB/mlx5: Fix init stage error handling to avoid double free of same QP and UAF
  RDMA/mlx5: Fix mkey cache WQ flush
  RDMA/hfi1: Workaround truncation compilation error
  IB/hfi1: Fix potential deadlock on &irq_src_lock and &dd->uctxt_lock
  RDMA/core: Remove NULL check before dev_{put, hold}
  RDMA/hfi1: Remove redundant assignment to pointer ppd
  RDMA/mlx5: Change the key being sent for MPV device affiliation
  RDMA/bnxt_re: Fix clang -Wimplicit-fallthrough in bnxt_re_handle_cq_async_error()
  RDMA/hns: Fix init failure of RoCE VF and HIP08
  RDMA/hns: Fix unnecessary port_num transition in HW stats allocation
  RDMA/hns: The UD mode can only be configured with DCQCN
  RDMA/hns: Add check for SL
  RDMA/hns: Fix signed-unsigned mixed comparisons
  RDMA/hns: Fix uninitialized ucmd in hns_roce_create_qp_common()
  RDMA/hns: Fix printing level of asynchronous events
  RDMA/core: Add support to set privileged QKEY parameter
  RDMA/bnxt_re: Do not report SRQ error in srq notification
  RDMA/bnxt_re: Report async events and errors
  RDMA/bnxt_re: Update HW interface headers
  IB/mlx5: Fix rdma counter binding for RAW QP
  ...

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc,
  scsi_debug) plus the usual assorted minor fixes and updates.

  The major change this time around is a prep patch for rethreading of
  the driver reset handler API not to take a scsi_cmd structure which
  starts to reduce various drivers' dependence on scsi_cmd in error
  handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits)
  scsi: ufs: core: Leave space for '\0' in utf8 desc string
  scsi: ufs: core: Conversion to bool not necessary
  scsi: ufs: core: Fix race between force complete and ISR
  scsi: megaraid: Fix up debug message in megaraid_abort_and_reset()
  scsi: aic79xx: Fix up NULL command in ahd_done()
  scsi: message: fusion: Initialize return value in mptfc_bus_reset()
  scsi: mpt3sas: Fix loop logic
  scsi: snic: Remove useless code in snic_dr_clean_pending_req()
  scsi: core: Add comment to target_destroy in scsi_host_template
  scsi: core: Clean up scsi_dev_queue_ready()
  scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler()
  scsi: target: core: Fix kernel-doc comment
  scsi: pmcraid: Fix kernel-doc comment
  scsi: core: Handle depopulation and restoration in progress
  scsi: ufs: core: Add support for parsing OPP
  scsi: ufs: core: Add OPP support for scaling clocks and regulators
  scsi: ufs: dt-bindings: common: Add OPP table
  scsi: scsi_debug: Add param to control sdev's allow_restart
  scsi: scsi_debug: Add debugfs interface to fail target reset
  scsi: scsi_debug: Add new error injection type: Reset LUN failed
  ...

Pull libnvdimm updates from Ira Weiny:

 - updates to deprecated and changed interfaces

 - bug/kdoc fixes

* tag 'libnvdimm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm: remove kernel-doc warnings:
  testing: nvdimm: make struct class structures constant
  libnvdimm: Annotate struct nd_region with __counted_by
  nd_btt: Make BTT lanes preemptible
  libnvdimm/of_pmem: Use devm_kstrdup instead of kstrdup and check its return value
  dax: refactor deprecated strncpy

Pull IPMI update from Corey Minyard:
 "Only one change, and I would normally just wait, but it will make the
  people trying to get rid of strncpy happy. Its a good change, anyway"

* tag 'for-linus-6.7-1' of https://github.com/cminyard/linux-ipmi:
  ipmi: refactor deprecated strncpy

Pull LED updates from Lee Jones:
 "Core Frameworks:
   - Add support for a bunch more colours

  New Drivers:
   - Add support for Kinetic KTD2026/7 RGB/White LEDs

  New Functionality:
   - Add support for device to enter HW Controlled Mode to Turris Omnia
     LEDs
   - Add support for HW Gamma Correction to Turris Omnia LEDs

  Fix-ups:
   - Apply new __counted_by() annotation to several data structures
     containing flexible arrays
   - Rid the return value from Platform's .remove() operation
   - Use *_cansleep() variants for instances were threads can sleep
   - Improve the semantics when setting the brightness
   - Generic clean-ups; code reduction, coding style, standard patterns
   - Replace strncpy() with strscpy()
   - Fix-up / add various documentation
   - Re-author the GPIO associated Trigger to use trigger-sources
   - Move to using standard APIs and helpers
   - Improve error checking
   - Stop using static GPIO bases

  Bug Fixes:
   - Fix Pointer to Enum casing warnings
   - Do not pretend that I2C backed device supports SMBUS
   - Ensure PWM LEDs are extinguished when disabled, rather than held in
     a state
   - Fix 'output may be truncated' warnings"

* tag 'leds-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (43 commits)
  leds: lp5521: Add an error check in lp5521_post_init_device
  leds: gpio: Update headers
  leds: gpio: Remove unneeded assignment
  leds: gpio: Move temporary variable for struct device to gpio_led_probe()
  leds: gpio: Refactor code to use devm_gpiod_get_index_optional()
  leds: gpio: Utilise PTR_ERR_OR_ZERO()
  leds: gpio: Keep driver firmware interface agnostic
  leds: core: Refactor led_update_brightness() to use standard pattern
  leds: turris-omnia: Fix brightness setting and trigger activating
  leds: sc27xx: Move mutex_init() down
  leds: trigger: netdev: Move size check in set_device_name
  leds: Add ktd202x driver
  dt-bindings: leds: Add Kinetic KTD2026/2027 LED
  leds: core: Add more colors from DT bindings to led_colors
  dt-bindings: leds: Last color ID is now 14 (LED_COLOR_ID_LIME)
  leds: tca6507: Don't use fixed GPIO base
  leds: lp3952: Convert to use maple tree register cache
  leds: lm392x: Convert to use maple tree register cache
  leds: aw200xx: Convert to use maple tree register cache
  leds: lm3601x: Convert to use maple tree register cache
  ...

Pull backlight updates from Lee Jones:
 "New Functionality:

   - Add new Device Tree binding for Monolithic Power (MPS) MP3309C
     step-up converter

   - Document brightness-levels in bindings for; generic, LED and PWM

  Bug Fixes:

   - Ensure PWMs are disabled on .shutdown(), .suspend() and .remove()"

* tag 'backlight-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  dt-bindings: backlight: Add brightness-levels related common properties
  backlight: pwm_bl: Disable PWM on shutdown, suspend and remove
  dt-bindings: backlight: Add MPS MP3309C

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Allow all MFD Cell properties to be filled in dynamically at
     runtime
   - Skip disabled device nodes and continue to look for subsequent
     devices

  New Device Support:
   - Add support for Lunar Lake-M PCI to Intel LPSS PCI
   - Add support for Denverton to Intel ICH LPC

  New Functionality:
   - Add support for Clocks to Texas Instruments TWL* Core
   - Add support for Interrupts to STMicroelectronics STM32 Timers

  Fix-ups:
   - Convert to new devm-* (managed) power-off API
   - Remove superfluous code
   - Bunch of Device Tree additions, conversions and adaptions
   - Simplify obtaining resources (memory, device data) using unified
     API helpers
   - Trivial coding-style / spelling type clean-ups
   - Constify / staticify changes
   - Expand or edit on existing documentation
   - Convert some Regmap configurations to use the Maple Tree cache
   - Apply new __counted_by() annotation to several data structures
     containing flexible arrays
   - Replace strncpy() with strscpy()

  Bug Fixes:
   - Remove double put creating reference imbalances
   - Ensure headphone/lineout detection gets set when booting with ACPI"

* tag 'mfd-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits)
  mfd: lpc_ich: Mark *_gpio_offsets data with const
  spmi: rename spmi device lookup helper
  spmi: document spmi_device_from_of() refcounting
  dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema
  mfd: rk8xx: Add support for RK806 power off
  mfd: rk8xx: Add support for standard system-power-controller property
  dt-bindings: mfd: rk806: Allow system-power-controller property
  dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller
  dt-bindings: mfd: max8925: Convert to DT schema format
  mfd: Use i2c_get_match_data() in a selection of drivers
  mfd: Use device_get_match_data() in a bunch of drivers
  mfd: mc13xxx-spi/wm831x-spi: Use spi_get_device_match_data()
  mfd: motorola-cpcap: Drop unnecessary of_match_device() call
  mfd: arizona-spi: Set pdata.hpdet_channel for ACPI enumerated devs
  mfd: qcom-spmi-pmic: Switch to EXPORT_SYMBOL_GPL()
  mfd: qcom-spmi-pmic: Fix revid implementation
  mfd: qcom-spmi-pmic: Fix reference leaks in revid helper
  mfd: intel-m10-bmc: Change contact for ABI docs
  mfd: max8907: Convert to use maple tree register cache
  mfd: max77686: Convert to use maple tree register cache
  ...

Pull sound updates from Takashi Iwai:
 "Most of changes at this time are for ASoC, spread over ASoC core and
  drivers due to the API prefix standardization.

  Other than that, there have little change wrt API, rather lots of
  driver-specific updates and fixes.

  Some highlight below:

  ASoC:
   - Standardization of API prefix
   - GPIO API usage improvements
   - Support for HDA patches
   - Lots of work on SOF, including crash dump support
   - Fixes for noise when stopping some Sounwire CODECs
   - Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc
     AT87390 and AW88399, many Intel platforms, many Mediatek platforms,
     Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas
     Instruments TAS575x

  HD-audio and USB-audio:
   - Deferred probe support of audio component binding
   - More fixes and enhancements for Cirrus subcodecs
   - USB Scarlett2 mixer and McIntosh DSD quirk

  Others:
   - More enhancement of snd-aloop driver
   - Update MAINTAINERS entry for linux-sound mailing list"

* tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (485 commits)
  ALSA: hda: cs35l41: Fix missing error code in cs35l41_smart_amp()
  ALSA: hda: cs35l41: mark cs35l41_verify_id() static
  ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag
  ASoC: soc-dai: add flag to mute and unmute stream during trigger
  ASoC: ams-delta.c: use component after check
  ASoC: amd: acp: select SND_SOC_AMD_ACP_LEGACY_COMMON for ACP63
  ASoC: codecs: aw88399: fix typo in Kconfig select
  ASoC: amd: acp: add ACPI dependency
  ASoC: Intel: avs: Add rt5514 machine board
  ASoC: Intel: avs: Add rt5514 machine board
  ALSA: scarlett2: Add missing check with firmware version control
  ALSA: virtio: use ack callback
  ALSA: scarlett2: Remap Level Meter values
  ALSA: scarlett2: Allow passing any output to line_out_remap()
  ALSA: scarlett2: Add support for reading firmware version
  ALSA: scarlett2: Rename Gen 3 config sets
  ALSA: scarlett2: Rename scarlett_gen2 to scarlett2
  ASoC: cs35l41: Detect CSPL errors when sending CSPL commands
  ALSA: hda: cs35l41: Check CSPL state after loading firmware
  ALSA: hda: cs35l41: Do not unload firmware before reset in system suspend
  ...

Pull HID updates from Jiri Kosina:

 - fixes for crashes detected by CONFIG_KUNIT_ALL_TESTS in hid-uclogic
   driver (Jinjie Ruan)

 - HID selftests fixes and improvements (Benjamin Tissoires)

 - probe error handling path fixes in hid-nvidia-shield driver
   (Christophe JAILLET)

 - cleanup of LED handling in hid-nintendo (Martino Fontana)

 - big cleanup of logitech-hidpp probe code (Hans de Goede)

 - Suspend/Resume fix for USB Thinkpad Compact Keyboard (Jamie Lentin)

 - firmware detection improvement for Lenovo cptkbd (Mikhail
   Khvainitski)

 - IRQ shutdown and workqueue initialization fixes for hid-cp2112 driver
   (Danny Kaehn)

 - #ifdef CONFIG_PM removal from HID code (Thomas Weißschuh)

 - other assorted device-ID additions and quirks

* tag 'for-linus-2023110101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (31 commits)
  HID: Add quirk for Dell Pro Wireless Keyboard and Mouse KM5221W
  HID: logitech-hidpp: Stop IO before calling hid_connect()
  HID: logitech-hidpp: Drop HIDPP_QUIRK_UNIFYING
  HID: logitech-hidpp: Drop delayed_work_cb()
  HID: logitech-hidpp: Fix connect event race
  HID: logitech-hidpp: Remove unused connected param from *_connect()
  HID: logitech-hidpp: Remove connected check for non-unifying devices
  HID: logitech-hidpp: Add hidpp_non_unifying_init() helper
  HID: logitech-hidpp: Move hidpp_overwrite_name() to before connect check
  HID: logitech-hidpp: Move g920_get_config() to just before hidpp_ff_init()
  HID: logitech-hidpp: Remove wtp_get_config() call from probe()
  HID: logitech-hidpp: Move get_wireless_feature_index() check to hidpp_connect_event()
  HID: logitech-hidpp: Revert "Don't restart communication if not necessary"
  HID: logitech-hidpp: Don't restart IO, instead defer hid_connect() only
  HID: rmi: remove #ifdef CONFIG_PM
  HID: multitouch: remove #ifdef CONFIG_PM
  HID: usbhid: remove #ifdef CONFIG_PM
  HID: core: remove #ifdef CONFIG_PM from hid_driver
  hid: lenovo: Resend all settings on reset_resume for compact keyboards
  HID: uclogic: Fix a work->entry not empty bug in __queue_work()
  ...

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
     evaluation to learn device characteristics (Andy Shevchenko)

   - Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
     definition (Ilpo Järvinen)

   - Simplify config access error checking in various drivers (Ilpo
     Järvinen)

   - Use pcie_capability_clear_word() (not
     pcie_capability_clear_and_set_word()) when only clearing (Ilpo
     Järvinen)

   - Add pci_get_base_class() to simplify finding devices using base
     class only (ignoring subclass and programming interface) (Sui
     Jingfeng)

   - Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
     devices from before the Class Code was added to PCI (Sui Jingfeng)

   - Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
     include ancient VGA devices (Sui Jingfeng)

  Resource management:

   - Make pci_assign_unassigned_resources() non-init because sparc uses
     it after init (Randy Dunlap)

  Driver binding:

   - Retain .remove() and .probe() callbacks (previously __init) because
     sysfs may cause them to be called later (Uwe Kleine-König)

   - Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
     it can be claimed by dwc3 instead (Vicki Pfau)

  PCI device hotplug:

   - Add Ampere Altra Attention Indicator extension driver for acpiphp
     (D Scott Phillips)

  Power management:

   - Quirk VideoPropulsion Torrent QN16e with longer delay after reset
     (Lukas Wunner)

   - Prevent users from overriding drivers that say we shouldn't use
     D3cold (Lukas Wunner)

   - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
     because wakeup interrupts from those states don't work if amd-pmc
     has put the platform in a hardware sleep state (Mario Limonciello)

  IOMMU:

   - Disable ATS for Intel IPU E2000 devices with invalidation message
     endianness erratum (Bartosz Pawlowski)

  Error handling:

   - Factor out interrupt enable/disable into helpers (Kai-Heng Feng)

  Peer-to-peer DMA:

   - Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
     ever use pagemaps with multiple entries (Gustavo A. R. Silva)

  ASPM:

   - Revert a change that broke when drivers disabled L1 and users later
     enabled an L1.x substate via sysfs, and fix a similar issue when
     users disabled L1 via sysfs (Heiner Kallweit)

  Endpoint framework:

   - Fix double free in __pci_epc_create() (Dan Carpenter)

   - Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)

  Cadence PCIe controller driver:

   - Drop unused "is_rc" member (Li Chen)

  Freescale Layerscape PCIe controller driver:

   - Enable 64-bit addressing in endpoint mode (Guanhua Gao)

  Intel VMD host bridge driver:

   - Fix multi-function header check (Ilpo Järvinen)

  Microsoft Hyper-V host bridge driver:

   - Annotate struct hv_dr_state with __counted_by (Kees Cook)

  NVIDIA Tegra194 PCIe controller driver:

   - Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
     already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
     Shimoda)

  Qualcomm PCIe controller driver:

   - Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
     (Manivannan Sadhasivam)

   - Add a .write_dbi2() callback so DBI2 register writes, e.g., for
     setting the BAR size, work correctly (Manivannan Sadhasivam)

   - Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
     doesn't enable ASPM states that haven't been enabled by the
     firmware (Manivannan Sadhasivam)

  Renesas R-Car Gen4 PCIe controller driver:

   - Add DesignWare core support (set max link width, EDMA_UNROLL flag,
     .pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
     (Yoshihiro Shimoda)

   - Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
     controller in both host and endpoint mode (Yoshihiro Shimoda)

  Xilinx NWL PCIe controller driver:

   - Update ECAM size to support 256 buses (Thippeswamy Havalige)

   - Stop setting bridge primary/secondary/subordinate bus numbers,
     since PCI core does this (Thippeswamy Havalige)

  Xilinx XDMA controller driver:

   - Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
     Xilinx XDMA Soft IP (Thippeswamy Havalige)

  Miscellaneous:

   - Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
     macros (Ilpo Järvinen, Bjorn Helgaas)

   - Remove logic_outb(), _outw(), outl() duplicate declarations (John
     Sanpe)

   - Replace unnecessary UTF-8 in Kconfig help text because menuconfig
     doesn't render it correctly (Liu Song)"

* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
  PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
  PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
  PCI: endpoint: Fix double free in __pci_epc_create()
  PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
  dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
  PCI: xilinx-cpm: Move IRQ definitions to a common header
  PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
  PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
  dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
  PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
  PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
  PCI/AER: Factor out interrupt toggling into helpers
  PCI: acpiphp: Allow built-in drivers for Attention Indicators
  PCI/portdrv: Use FIELD_GET()
  PCI/VC: Use FIELD_GET()
  PCI/PTM: Use FIELD_GET()
  PCI/PME: Use FIELD_GET()
  PCI/ATS: Use FIELD_GET()
  PCI/ATS: Show PASID Capability register width in bitmasks
  PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
  ...

Pull smb server updates from Steve French:
 "Seven ksmbd server fixes:

   - logoff improvement for multichannel bound connections

   - unicode fix for surrogate pairs

   - RDMA (smbdirect) fix for IB devices

   - fix locking deadlock in kern_path_create during rename

   - iov memory allocation fix

   - two minor cleanup patches (doc cleanup, and unused variable)"

* tag '6.7-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: no need to wait for binded connection termination at logoff
  ksmbd: add support for surrogate pair conversion
  ksmbd: fix missing RDMA-capable flag for IPoIB device in ksmbd_rdma_capable_netdev()
  ksmbd: fix recursive locking in vfs helpers
  ksmbd: fix kernel-doc comment of ksmbd_vfs_setxattr()
  ksmbd: reorganize ksmbd_iov_pin_rsp()
  ksmbd: Remove unused field in ksmbd_user struct

Pull fsnotify update from Jan Kara:
 "This time just one tiny cleanup for fsnotify"

* tag 'fsnotify_for_v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: delete useless parenthesis in FANOTIFY_INLINE_FH macro

Pull ext2, udf, and quota updates from Jan Kara:

 - conversion of ext2 directory code to use folios

 - cleanups in UDF declarations

 - bugfix for quota interaction with file encryption

* tag 'fs_for_v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2: Convert ext2_prepare_chunk and ext2_commit_chunk to folios
  ext2: Convert ext2_make_empty() to use a folio
  ext2: Convert ext2_unlink() and ext2_rename() to use folios
  ext2: Convert ext2_delete_entry() to use folios
  ext2: Convert ext2_empty_dir() to use a folio
  ext2: Convert ext2_add_link() to use a folio
  ext2: Convert ext2_readdir to use a folio
  ext2: Add ext2_get_folio()
  ext2: Convert ext2_check_page to ext2_check_folio
  highmem: Add folio_release_kmap()
  udf: Avoid unneeded variable length array in struct fileIdentDesc
  udf: Annotate struct udf_bitmap with __counted_by
  quota: explicitly forbid quota files from being encrypted