mvebu dt for 5.4 (part 1)

 - Disable the kirkwood RTC that doesn't work on the ts219 board

* tag 'mvebu-dt-5.4-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: ts219: disable the SoC's RTC

Link: https://lore.kernel.org/r/878srdzjpj.fsf@FE-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

AT91 DT for 5.4

 - style cleanup for at91sam9x5 based boards
 - avoid colliding node and property names

* tag 'at91-5.4-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: at91sam9x5dm.dtsi: Style cleanup
  ARM: dts: at91: at91sam9x5_lcd.dtsi: Style cleanup
  ARM: dts: at91: at91sam9xx5ek: Style cleanup
  ARM: dts: at91: at91sam9g15: Style cleanup
  ARM: dts: at91: kizboxmini: Style cleanup
  ARM: dts: at91: cosino: Style cleanup
  ARM: dts: at91: ariettag25: style cleanup
  ARM: dts: at91: ariag25: Style cleanup
  ARM: dts: at91: Add label for sam9x5's internal RTC
  dt-bindings: add vendor prefix "acme" for "Acme Systems srl"
  ARM: dts: at91: Avoid colliding 'display' node and property names

Link: https://lore.kernel.org/r/20190825202642.GA18853@piout.netSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt64-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree update for 5.4:
 - New board support: i.MX8MQ Nitrogen8m, Hummingboard Pulse,
   PICO-PI-IMX8M, i.MX8QXP AI_ML, and LS1046A FRWY board.
 - Add gpio-ranges for GPIO devices on i.MX8MQ and i.MX8MM.
 - Update OPP table according to latest data sheet and add opp-suspend
   to OPP table for i.MX8MQ and i.MX8MM.
 - Add IDEL states for i.MX8MM SoC.
 - Correct I2C clock divider for Layerscape SoCs.
 - Add series alias and LPUART baud clock for i.MX8QXP SoC.
 - Add MIPI D-PHY device for i.MX8MQ and enable it on imx8mq-librem5
   board.
 - Enable USB1 and Type-C support for i.MX8MM EVK board.
 - Add Thermal Monitor Unit support for LS1028A SoC.
 - Misc small update and correction on Layerscape and i.MX8 support.

* tag 'imx-dt64-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits)
  arm64: dts: imx8mq: Add mux controller to iomuxc_gpr
  arm64: dts: fsl: add support for Hummingboard Pulse
  arm64: dts: ls1088a: update gpio compatible
  arm64: dts: imx: Add i.mx8mq nitrogen8m basic dts support
  arm64: dts: ls1088a-qds: Add the spi-flash nodes under the DSPI controller
  arm64: dts: ls1088a: Add the DSPI controller node
  arm64: dts: imx8mm: Enable cpu-idle driver
  arm64: dts: ls1028a: Add esdhc node in dts
  arm64: dts: ls1028a: Add properties node for Display output pixel clock
  arm64: dts: lx2160a: Fix incorrect I2C clock divider
  arm64: dts: ls1028a: Fix incorrect I2C clock divider
  arm64: dts: ls1012a: Fix incorrect I2C clock divider
  arm64: dts: ls1088a: Fix incorrect I2C clock divider
  arm64: dts: ls1028a: fix gpio nodes
  arm64: dts: ls1028a: Add Thermal Monitor Unit node
  arm64: dts: imx8mq-evk: Unbypass audio_pll1
  arm64: dts: imx8mm: Add opp-suspend property to OPP table
  arm64: dts: imx8mq: Add opp-suspend property to OPP table
  arm64: dts: ls1088a: Revise gpio registers to little-endian
  arm64: dts: add the console node for DPAA2 platforms
  ...

Link: https://lore.kernel.org/r/20190825153237.28829-6-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX arm32 device tree changes for 5.4:
 - New board support: ZII i.MX7 RMU2, Kontron i.MX6UL N6310, and
   PHYTEC phyBOARD-Segin based on i.MX6ULL.
 - A series from Andrey Smirnov to update vf610-zii boards on I2C
   pinmux, switch watchdog, GPIO expander IRQ.
 - Move GIC node into soc node for i.MX6 SoCs.
 - Add OV5645 camera support for imx6qdl-wandboard board.
 - Drop unneeded snvs_pwrkey node for imx7d-zii-rpu2 and imx7-colibri.
 - Use simple-mfd instead of simple-bus for i.MX6 ANATOP.
 - Move the native-mode property inside the display-timings node for
   various i.MX25 and i.MX27 boards.
 - Add EDMA devices for i.MX7ULP SoC.
 - A series from Stefan Riedmueller to update imx6ul-phytec-segin board
   on various devices.
 - Use OF graph to describe the display for opos6uldev board.
 - Misc random updates on i.MX7/6 boards.

* tag 'imx-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits)
  ARM: dts: vf610-zii-scu4-aib: Configure IRQ line for GPIO expander
  ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards
  ARM: dts: vf610-zii-cfu1: Slow I2C0 down to 100 kHz
  ARM: dts: pbab01: correct rtc vendor
  ARM: vf610-zii-cfu1: Add node for switch watchdog
  ARM: dts: imx6: drop gpmi-nand address and size cells
  ARM: dts: imx6: replace simple-bus by simple-mfd for anatop
  ARM: dts: imx6qdl-colibri: add phy to fec
  ARM: dts: imx7-colibri: add recovery for I2C for iMX7
  ARM: dts: imx7-colibri: Add sleep pinctrl to ethernet
  ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
  ARM: dts: imx7-colibri: disable HS400
  ARM: dts: imx7-colibri: make sure module supplies are always on
  ARM: dts: imx7d: cl-som-imx7: add compatible for phy
  ARM: dts: imx7d: cl-som-imx7: make ethernet work again
  ARM: dts: imx6ul: Add csi node
  ARM: dts: imx25: mbimxsd25: native-mode is part of display-timings
  ARM: dts: apf27dev: native-mode is part of display-timings
  ARM: dts: edb7211: native-mode is part of display-timings
  ARM: dts: imx27-phytec-phycore-rdk: native-mode is part of display-timings
  ...

Link: https://lore.kernel.org/r/20190825153237.28829-5-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt-clkdep-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX device tree update with new clocks:
 - A series from Anson Huang to add i.MX8MN SoC and DDR4 EVK board
   device tree support.
 - Add DSP device tree support for i.MX8QXP SoC.

* tag 'imx-dt-clkdep-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8qxp: Add DSP DT node
  arm64: dts: imx8mn: Add cpu-freq support
  arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support
  arm64: dts: imx8mn-ddr4-evk: Add i2c1 support
  arm64: dts: freescale: Add i.MX8MN DDR4 EVK board support
  arm64: dts: imx8mn: Add gpio-ranges property
  arm64: dts: freescale: Add i.MX8MN dtsi support
  clk: imx8: Add DSP related clocks
  clk: imx: Add support for i.MX8MN clock driver
  clk: imx: Add API for clk unregister when driver probe fail
  clk: imx8mm: Make 1416X/1443X PLL macro definitions common for usage
  dt-bindings: imx: Add clock binding doc for i.MX8MN

Link: https://lore.kernel.org/r/20190825153237.28829-4-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-bindings-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT bindings update for 5.4
 - Add SoC bindings for i.MX8MN.
 - Add board bindings for pico-pi-imx8m, Hummingboard Pulse, imx8mq
   nitrogen, i.MX8QXP AI_ML, ls1046a-frwy etc.
 - Add vendor prefix for Anvo-Systems and Einfochips.
 - Update LPUART bindings for i.MX8QXP clock requirement.
 - Update imx-weim bindings for optional burst clock mode support.
 - Update EEPROM bindings for Anvo ANV32E61W device support.

* tag 'imx-bindings-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: fsl: Add Kontron i.MX6UL N6310 compatibles
  dt-bindings: eeprom: at25: Add Anvo ANV32E61W
  dt-bindings: vendor-prefixes: Add Anvo-Systems
  dt-bindings: arm: fsl: add Hummingboard Pulse
  dt-bindings: arm: imx: add imx8mq nitrogen support
  dt-bindings: fsl: dspi: Add fsl,ls1088a-dspi compatible string
  dt-bindings: arm: imx: Add the soc binding for i.MX8MN
  dt-bindings: bus: imx-weim: document optional burst clock mode
  dt-bindings: arm: fsl: Add the pico-pi-imx8m board
  dt-bindings: arm: Document i.MX8QXP AI_ML board binding
  dt-bindings: Add Vendor prefix for Einfochips
  dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy board
  dt-bindings: serial: lpuart: add the clock requirement for imx8qxp
  dt-bindings: arm: fsl: Add support for ZII i.MX7 RMU2 board

Link: https://lore.kernel.org/r/20190825153237.28829-3-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'aspeed-5.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt

ASPEED device tree updates for 5.4

New machines:

 - Facebook Wedge100, Wedge40 and Minipack
 - Lenovo Hr855xg2
 - Wistron Mihawk

There's a few other updates, notably some changes to to use the newly
added SDHCI driver.

* tag 'aspeed-5.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: swift: Add eMMC device
  ARM: dts: aspeed: Enable first MMC slot on AST2500 EVB
  ARM: dts: aspeed: Describe SD controllers
  ARM: dts: aspeed: Add Mihawk BMC platform
  ARM: dts: aspeed: fp5280g2: Fix power supply address
  ARM: dts: aspeed: tiogapass: Add Riser card
  ARM: dts: aspeed: tiogapass: Move battery sensor
  ARM: dts: aspeed: Add Facebook Wedge100 BMC
  ARM: dts: aspeed: Add Facebook Wedge40 BMC
  ARM: dts: aspeed: swift: Fix FSI GPIOs
  ARM: dts: aspeed: Add SGPM pinmux
  ARM: dts: aspeed: tiogapass: Add VR devices
  ARM: dts: aspeed: Add Lenovo Hr855xg2 BMC
  ARM: dts: aspeed: Add Facebook Minipack BMC

Link: https://lore.kernel.org/r/CACPK8XfKHpNYXNE_VRaLeGUQa7-hkmUS0nsPfaeSLE4sckKFHg@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.4/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

dts changes for omap variants for v5.4

Remove regulator-boot-off properties that we never had in the mainline
kernel so they won't do anything. We add stdout-path for gta04, and
make am335x-boneblue use am335x-osd335x-common.dtsi file.

* tag 'omap-for-v5.4/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-boneblue: Use of am335x-osd335x-common.dtsi
  ARM: dts: gta04: define chosen/stdout-path
  ARM: dts: omap3-n950-n9: Remove regulator-boot-off property
  ARM: dts: am335x-cm-t335: Remove regulator-boot-off property

Link: https://lore.kernel.org/r/pull-1566599057-142651@atomide.com-2Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.3-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt8183:
- fix pwrap interrupt number
- add i2c notes

dt-bindings:
- add compatible for mt6779
- add mt6779 uart and sysirq compatible

* tag 'v5.3-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  dt-bindings: irq: mtk, sysirq: add support for mt6779
  dt-bindings: mtk-uart: add mt6779 uart bindings
  dt-bindings: mediatek: add support for mt6779 reference board
  arm64: dts: mt8183: add I2C nodes
  arm64: dts: mt8183: fix pwrap gic number

Link: https://lore.kernel.org/r/def8fb77-fce4-097d-7ae2-8c4670bc09c1@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.3-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

add support for the mt7629 reference board

* tag 'v5.3-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm: dts: mediatek: add basic support for MT7629 SoC

Link: https://lore.kernel.org/r/e236f659-2851-21b8-1873-314cd72ed6be@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Allwinner DT changes for 5.4

Our usual pile of patches for the next release, which include mostly:
  - More fixes thanks to the DT validation using the YAML bindings
  - IR receiver support on the H6
  - SPDIF support on the H6
  - I2C Support on the H6
  - CSI support on the A20
  - RTC support on the H6
  - New Boards: Lichee Zero Plus, Tanix TX6, A64-Olinuxino-eMMC

* tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (40 commits)
  arm64: dts: allwinner: orange-pi-3: Enable WiFi
  ARM: dts: sunxi: Add missing watchdog clocks
  ARM: dts: sunxi: Add missing watchdog interrupts
  arm64: dts: allwinner: h6: Add support for RTC and fix the clock tree
  ARM: dts: sun7i: Add CSI0 controller
  arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)
  dt-bindings: arm: sunxi: Add compatible for A64 OlinuXino with eMMC
  ARM: dts: v3s: Change the timers compatible
  ARM: dts: h3: Change the timers compatible
  ARM: dts: a83t: Change the timers compatible
  ARM: dts: a23/a33: Change the timers compatible
  ARM: dts: sun6i: Add missing timers interrupts
  ARM: dts: sun5i: Add missing timers interrupts
  ARM: dts: sun4i: Add missing timers interrupts
  dt-bindings: mfd: Convert Allwinner GPADC bindings to a schema
  arm64: dts: allwinner: h6: Introduce Tanix TX6 board
  dt-bindings: arm: sunxi: Add compatible for Tanix TX6 board
  arm64: allwinner: h6: add I2C nodes
  dt-bindings: i2c: mv64xxx: Add compatible for the H6 i2c node.
  ARM: dts: sunxi: Add mdio bus sub-node to GMAC
  ...

Link: https://lore.kernel.org/r/d97e6252-9dd7-4cf5-a3cf-56f78b0ca455.lettre@localhostSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt-bindings-for-v5.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT binding updates for v5.4 (take two)

  - Renesas DT binding doc filename cleanups,
  - R-Car Gen3 and RZ/G1 updates for the R-Car CAN and CANFD DT
    bindings.

* tag 'renesas-dt-bindings-for-v5.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  dt-bindings: can: rcar_can: document r8a77470 support
  dt-bindings: can: rcar_canfd: document r8a77995 support
  dt-bindings: can: rcar_can: document r8a77995 support
  dt-bindings: can: rcar_can: document r8a77990 support
  dt-bindings: rcar-{csi2,vin}: Rename bindings documentation files
  dt-bindings: rcar-imr: Rename bindings documentation file
  dt-bindings: Rename file of DT bindings for Renesas memory controllers

Link: https://lore.kernel.org/r/20190823123643.18799-6-geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm64-dt-for-v5.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM64 DT updates for v5.4 (take two)

  - Sort nodes in various SoC and board DTSes,
  - HDMI sound for HiHope RZ/G2M and R-Car M3-N Salvator-X(S) boards,
  - Limit EtherAVB to 100Mbps on the Ebisu and Draak boards,
  - Small fixes and improvements.

* tag 'renesas-arm64-dt-for-v5.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (21 commits)
  arm64: dts: renesas: Update 'vsps' properties for readability
  arm64: dts: renesas: r8a77965-salvator-x(s): Enable HDMI sound
  arm64: dts: renesas: r8a774c0: Fix register range of display node
  arm64: dts: renesas: r8a77970: Sort nodes
  arm64: dts: renesas: r8a7796: Sort nodes
  arm64: dts: renesas: r8a774c0: Sort nodes
  arm64: dts: renesas: r8a774c0: cat874: Sort nodes
  arm64: dts: renesas: r8a774a1: Sort nodes
  arm64: dts: renesas: r8a77980: Fix IPMMU-VC0 base address
  arm64: dts: renesas: ebisu, draak: Limit EtherAVB to 100Mbps
  arm64: dts: renesas: hihope-common: Add HDMI audio support
  arm64: dts: renesas: r8a774c0: cat874: Add definition for 12V regulator
  arm64: dts: renesas: r8a774c0: Point LVDS0 to its companion LVDS1
  arm64: dts: renesas: r8a77995: Sort nodes
  arm64: dts: renesas: r8a77995: draak: Sort nodes
  arm64: dts: renesas: r8a77990: Sort nodes
  arm64: dts: renesas: r8a77990: ebisu: Sort nodes
  arm64: dts: renesas: r8a77980: v3hsk: Sort nodes
  arm64: dts: renesas: r8a77980: condor: Sort nodes
  arm64: dts: renesas: r8a77970: v3msk: Sort nodes
  ...

Link: https://lore.kernel.org/r/20190823123643.18799-4-geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm-dt-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.4

  - Fix HSCIF PM Domain on R-Car H1,
  - PMU support for RZ/G1C.

* tag 'renesas-arm-dt-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: dts: r8a77470: Add PMU device node
  ARM: dts: r8a7779: Use SYSC "always-on" PM Domain for HSCIF

Link: https://lore.kernel.org/r/20190823123643.18799-2-geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.4

Highlights
- new SoCs (G12B family): S922X, A311D
- new SoCs (SM1 family): S905X3
- new board: SEI Robotics SEI610 (SM1/S905X3)
- new board: Khadas VIM3 (G12B/A311D)
- DVFS/CPUfreq support on G12[AB] family

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (40 commits)
  arm64: dts: add support for SM1 based SEI Robotics SEI610
  dt-bindings: arm: amlogic: add SEI Robotics SEI610 bindings
  dt-bindings: arm: amlogic: add SM1 bindings
  arm64: dts: meson-g12b-odroid-n2: enable DVFS
  arm64: dts: meson-g12b-khadas-vim3: add initial device-tree
  dt-bindings: arm: amlogic: fix x96-max/sei510 section in amlogic.yaml
  arm64: dts: amlogic: g12 CPU timers stop in suspend
  arm64: dts: meson-g12b: support a311d and s922x cpu operating points
  dt-bindings: arm: amlogic: add support for the Khadas VIM3
  dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based A311D SoC
  dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC
  arm64: dts: meson: add video decoder entries
  arm64: dts: meson-gx: add video decoder entry
  dt-bindings: media: amlogic,vdec: add default compatible
  arm64: dts: meson: add ethernet fifo sizes
  arm64: dts: meson-g12b: add cpus OPP tables
  arm64: dts: meson-g12a: enable DVFS on G12A boards
  arm64: dts: meson-g12a: add cpus OPP table
  arm64: dts: meson-g12-common: add pwm_a on GPIOE_2 pinmux
  arm64: dts: move common G12A & G12B modes to meson-g12-common.dtsi
  ...

Link: https://lore.kernel.org/r/7hr25fbi4v.fsf@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: Amlogic updates for v5.4

Highlights
- odroid-c1: use MAC address from efuse
- add VDD_EE regulator to several boards

* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: odroidc1: use the MAC address stored in the eFuse
  ARM: dts: meson8b: mxq: add the VDDEE regulator
  ARM: dts: meson8b: odroidc1: add the VDDEE regulator
  ARM: dts: meson8b: ec100: add the VDDEE regulator
  ARM: dts: meson8b: add the PWM_D output pin
  ARM: dts: meson8b: add ethernet fifo sizes

Link: https://lore.kernel.org/r/7hzhk3bi96.fsf@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'socfpga_dts_updates_for_v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.4
- Add reset properties for various peripherals
	- QSPI OCP and DMA on Arria10
	- DMA on Agilex/Stratix10
- Update NAND controller bindings to match driver update
- Add NAND controller to Stratix10
- VINING FPGA board fixups
	- Update button mapping
	- Adjust GMAC1 clock and TXD skew settings
- Add missing reset-names for dma controller

* tag 'socfpga_dts_updates_for_v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: socfpga: add missing reset-names for dma
  ARM: dts: socfpga: Adjust GMAC1 clock and TXD lines skew on VINING FPGA
  ARM: dts: socfpga: Fix up button mapping on VINING FPGA
  arm64: dts: stratix10: Add NAND device node
  ARM: dts: socfpga: update to new Denali NAND binding
  arm64: dts: agilex/stratix10: Add reset properties for DMA
  ARM: dts: socfpga: add reset properties for DMA
  ARM: dts: socfpga: add the QSPI OCP reset property on arria10

Link: https://lore.kernel.org/r/20190819141659.26414-1-dinguyen@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

PWM-Fan and nor-flash for the RockPro64, a better display mode for
the Kevin Chromebook and a new board the Leez P710 SBC.

* tag 'v5.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC
  arm64: dts: rockchip: enable internal SPI flash for RockPro64.
  arm64: dts: rockchip: Add PWM fan for RockPro64
  arm64: dts: rockchip: Specify override mode for kevin panel

Link: https://lore.kernel.org/r/20190819141659.26414-1-dinguyen@kernel.org
Link: https://lore.kernel.org/r/2362486.gYoCZEsBuK@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

A lot more love for Veyron devices with cleanups in the display and wifi
areas and also a 100ms speedup as a delay isn't needed anymore.
New boards are Tiger and Fievel from the Veyron family and the Mecer Xtreme
Mini S6, which I think is the first consumer-grade rk3229-based device in
the kernel.

* tag 'v5.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: add device tree for Mecer Xtreme Mini S6
  Revert "ARM: dts: rockchip: add startup delay to rk3288-veyron panel-regulators"
  ARM: dts: rockchip: Add pin names for rk3288-veyron fievel
  ARM: dts: rockchip: A few fixes for veyron-{fievel,tiger}
  ARM: dts: rockchip: Cleanup style around assignment operator
  ARM: dts: rockchip: add veyron-tiger board
  ARM: dts: rockchip: add veyron-fievel board
  dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-{fievel,tiger}
  ARM: dts: rockchip: consolidate veyron panel and backlight settings
  ARM: dts: rockchip: move rk3288-veryon display settings into a separate file
  ARM: dts: rockchip: Limit WiFi TX power on rk3288-veyron-jerry
  ARM: dts: rockchip: Specify rk3288-veyron-minnie's display timings
  ARM: dts: rockchip: Specify rk3288-veyron-chromebook's display timings

Link: https://lore.kernel.org/r/1611583.rKl1eQBRh8@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Samsung DTS ARM changes for v5.4

1. Add AHCI to Exynos5250,
2. Add camera and GPU power domains to Exynos5422,
3. Minor cleanup.

* tag 'samsung-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Add CAM power domain to Exynos5422/5800
  ARM: dts: exynos: Add G3D power domain to Exynos542x
  ARM: dts: exynos: Move MSC power domain to the right (sorted) place
  ARM: dts: exynos: Add port map to Exynos5250 AHCI node
  ARM: dts: exynos: Use space after '=' in exynos4412-itop-scp-core

Link: https://lore.kernel.org/r/20190816163042.6604-2-krzk@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The internal RTC doesn't work, loading the driver only yields

	rtc-mv f1010300.rtc: internal RTC not ticking

. So disable it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Configure IRQ line for SX1503 GPIO expander. We already have
appropriate pinmux entry and all that is missing is "interrupt-parent"
and "interrupts" properties. Add them.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The only mux controls the MIPI DSI input selection.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add support for i.MX6UL modules from Kontron Electronics GmbH (before
acquisition: Exceet Electronics) and evalkit boards based on it:

1. N6310 SOM: i.MX6 UL System-on-Module, a 25x25 mm solderable module
   (LGA pads and pin castellations) with 256 MB RAM, 1 MB NOR-Flash,
   256 MB NAND and other interfaces,
2. N6310 S: evalkit, w/wo eMMC, without display,
3. N6310 S 43: evalkit with 4.3" display,

The work is based on Exceet/Kontron source code (GPLv2) with numerous
changes:
1. Reorganize files,
2. Rename Exceet -> Kontron,
3. Rename models/compatibles to match newest Kontron product naming,
4. Fix coding style errors and adjust to device tree coding guidelines,
5. Fix DTC warnings,
6. Extend compatibles so eval boards inherit the SoM compatible,
7. Use defines instead of GPIO and interrupt flag values,
8. Use proper vendor compatible for Macronix SPI NOR,
9. Replace deprecated bindings with proper ones,
10. Sort nodes alphabetically,
11. Remove Admatec display nodes (not yet supported).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add the compatibles for Kontron i.MX6UL N6310 SoM and boards.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Document the compatible for ANV32E61W 64kb Serial SPI non-volatile SRAM.
Although it is a SRAM device, it can be accessed through EEPROM
interface. At least until there is no proper SRAM driver support for
it.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add vendor prefix for Anvo-Systems Dresden GmbH.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The SolidRun Hummingboard Pulse carrier board carries the SolidRun
i.MX8MQ based SOM.

Notably missing is PCIe support that depends on analog PLLOUT clock.
Current imx clk driver does not support this clock.
Signed-off-by: Jon Nettleton <jon@solid-run.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add binding documentation for the SolidRun Hummingboard Pulse board.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Fiber-optic modules attached to the bus are only rated to work at
100 kHz, so decrease the bus frequency to accommodate that.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

add ls1088a gpio specify compatible.
Signed-off-by: Song Hui <hui.song_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add basic dts support for i.MX8MQ NITROGEN8M.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
[Dafna: porting vendor's code to mainline]
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The Nitrogen8M is an ARM based single board computer (SBC)
designed to leverage the full capabilities of NXP’s i.MX8M
Quad processor.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
[Dafna: porting vendor's code to mainline]
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This patch adds the spi-flash nodes under the DSPI controller for
ls1088a-qds boards.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This patch adds the DSPI controller node for ls1088a boards.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

new compatible string: "fsl,ls1088a-dspi".
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The rtc8564 is made by Epson but is similar to the NXP pcf8563. Use the
correct vendor name.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add binding documentation of mediatek,sysirq for mt6779 SoC.
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add documentation for mt6779 uart dt-bindings
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Update binding document for mt6779 reference board
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>