- 08 Oct, 2024 1 commit
-
-
Christian König authored
Make sure to always set the GEM function pointer even for in kernel allocations. This fixes a NULL pointer deref caused by switching to GEM references. Signed-off-by:
Christian König <christian.koenig@amd.com> Fixes: fd69ef05 ("drm/radeon: use GEM references instead of TTMs") Acked-by:
Alex Deucher <alexander.deucher@amd.com> Tested-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
- 07 Oct, 2024 5 commits
-
-
Hamza Mahfooz authored
Since, two suspend-resume cycles are required to enter hibernate and, since we only need to enable idle optimizations in the first cycle (which is pretty much equivalent to s2idle). We can check in_s0ix, to prevent the system from entering idle optimizations before it actually enters hibernate (from display's perspective). Also, call dc_set_power_state() before dc_allow_idle_optimizations(), since it's safer to do so because dc_set_power_state() writes to DMUB. Acked-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Josip Pavic authored
[Why] Since the surface/stream update flags aren't cleared after applying updates, those same updates may be applied again in a future call to update surfaces/streams for surfaces/streams that aren't actually part of that update (i.e. applying an update for one surface/stream can trigger unintended programming on a different surface/stream). For example, when an update results in a call to program_front_end_for_ctx, that function may call program_pipe on all pipes. If there are surface update flags that were never cleared on the surface some pipe is attached to, then the same update will be programmed again. [How] Clear the surface and stream update flags after applying the updates. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3441 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3616 Cc: Melissa Wen <mwen@igalia.com> Reviewed-by:
Aric Cyr <aric.cyr@amd.com> Signed-off-by:
Josip Pavic <Josip.Pavic@amd.com> Signed-off-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Alex Deucher authored
Partially revert commit 0ca9f757 ("drm/amd/pm: powerplay: Add `__counted_by` attribute for flexible arrays") The count attribute for these arrays does not get set until after the arrays are allocated and populated leading to false UBSAN warnings. Fixes: 0ca9f757 ("drm/amd/pm: powerplay: Add `__counted_by` attribute for flexible arrays") Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3662Signed-off-by:
-
Wu Hoi Pok authored
The patch is to solve null dereference in 'aux.dev', which is introduced in recent radeon rework. By having 'late_register', the connector should be registered after 'drm_dev_register' automatically, where in before it is the opposite. Fixes: 90985660 ("drm/radeon: remove load callback from kms_driver") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3665Tested-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
Wu Hoi Pok <wuhoipok@gmail.com> Signed-off-by:
-
Lang Yu authored
Only creating a new reference for each process instead of each VM. Fixes: 9a1c1339 ("drm/amdkfd: Run restore_workers on freezable WQs") Suggested-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
Lang Yu <lang.yu@amd.com> Reviewed-by:
-
- 04 Oct, 2024 1 commit
-
-
https://gitlab.freedesktop.org/drm/xe/kernelDave Airlie authored
Driver Changes: - Restore pci state on resume (Rodrigo Vivi) - Fix locking on submission, queue and vm (Matthew Auld, Matthew Brost) - Fix UAF on queue destruction (Matthew Auld) - Fix resource release on freq init error path (He Lugang) - Use rw_semaphore to reduce contention on ASID->VM lookup (Matthew Brost) - Fix steering for media on Xe2_HPM (Gustavo Sousa) - Tuning updates to Xe2 (Gustavo Sousa) - Resume TDR after GT reset to prevent jobs running forever (Matthew Brost) - Move id allocation to avoid userspace using a guessed number to trigger UAF (Matthew Auld, Matthew Brost) - Fix OA stream close preventing pbatch buffers to complete (José) - Fix NPD when migrating memory on LNL (Zhanjun Dong) - Fix memory leak when aborting binds (Matthew Brost) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2fiv63yanlal5mpw3mxtotte6yvkvtex74c7mkjxca4bazlyja@o4iejcfragxy
-
- 03 Oct, 2024 19 commits
-
-
Matthew Brost authored
Make sure to call xe_pt_update_ops_fini in xe_pt_update_ops_abort to free any memory the bind allocated. Caught by kmemleak when running Vulkan CTS tests on LNL. The leak seems to happen only when there's some kind of failure happening, like the lack of memory. Example output: unreferenced object 0xffff9120bdf62000 (size 8192): comm "deqp-vk", pid 115008, jiffies 4310295728 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 1b 05 f9 28 01 00 00 40 ...........(...@ 00 00 00 00 00 00 00 00 1b 15 f9 28 01 00 00 40 ...........(...@ backtrace (crc 7a56be79): [<ffffffff86dd81f0>] __kmalloc_cache_noprof+0x310/0x3d0 [<ffffffffc08e8211>] xe_pt_new_shared.constprop.0+0x81/0xb0 [xe] [<ffffffffc08e8309>] xe_pt_insert_entry+0xb9/0x140 [xe] [<ffffffffc08eab6d>] xe_pt_stage_bind_entry+0x12d/0x5b0 [xe] [<ffffffffc08ecbca>] xe_pt_walk_range+0xea/0x280 [xe] [<ffffffffc08eccea>] xe_pt_walk_range+0x20a/0x280 [xe] [<ffffffffc08eccea>] xe_pt_walk_range+0x20a/0x280 [xe] [<ffffffffc08eccea>] xe_pt_walk_range+0x20a/0x280 [xe] [<ffffffffc08eccea>] xe_pt_walk_range+0x20a/0x280 [xe] [<ffffffffc08e9eff>] xe_pt_stage_bind.constprop.0+0x25f/0x580 [xe] [<ffffffffc08eb21a>] bind_op_prepare+0xea/0x6e0 [xe] [<ffffffffc08ebab8>] xe_pt_update_ops_prepare+0x1c8/0x440 [xe] [<ffffffffc08ffbf3>] ops_execute+0x143/0x850 [xe] [<ffffffffc0900b64>] vm_bind_ioctl_ops_execute+0x244/0x800 [xe] [<ffffffffc0906467>] xe_vm_bind_ioctl+0x1877/0x2370 [xe] [<ffffffffc05e92b3>] drm_ioctl_kernel+0xb3/0x110 [drm] unreferenced object 0xffff9120bdf72000 (size 8192): comm "deqp-vk", pid 115008, jiffies 4310295728 hex dump (first 32 bytes): 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace (crc 23b2f0b5): [<ffffffff86dd81f0>] __kmalloc_cache_noprof+0x310/0x3d0 [<ffffffffc08e8211>] xe_pt_new_shared.constprop.0+0x81/0xb0 [xe] [<ffffffffc08e8453>] xe_pt_stage_unbind_post_descend+0xb3/0x150 [xe] [<ffffffffc08ecd26>] xe_pt_walk_range+0x246/0x280 [xe] [<ffffffffc08eccea>] xe_pt_walk_range+0x20a/0x280 [xe] [<ffffffffc08eccea>] xe_pt_walk_range+0x20a/0x280 [xe] [<ffffffffc08eccea>] xe_pt_walk_range+0x20a/0x280 [xe] [<ffffffffc08ece31>] xe_pt_walk_shared+0xc1/0x110 [xe] [<ffffffffc08e7b2a>] xe_pt_stage_unbind+0x9a/0xd0 [xe] [<ffffffffc08e913d>] unbind_op_prepare+0xdd/0x270 [xe] [<ffffffffc08eb9f6>] xe_pt_update_ops_prepare+0x106/0x440 [xe] [<ffffffffc08ffbf3>] ops_execute+0x143/0x850 [xe] [<ffffffffc0900b64>] vm_bind_ioctl_ops_execute+0x244/0x800 [xe] [<ffffffffc0906467>] xe_vm_bind_ioctl+0x1877/0x2370 [xe] [<ffffffffc05e92b3>] drm_ioctl_kernel+0xb3/0x110 [drm] [<ffffffffc05e95a0>] drm_ioctl+0x280/0x4e0 [drm] Reported-by:Paulo Zanoni <paulo.r.zanoni@intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2877 Fixes: a708f650 ("drm/xe: Update PT layer with better error handling") Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com>
-
Zhanjun Dong authored
xe_migrate_copy designed to copy content of TTM resources. When source resource is null, it will trigger a NULL pointer dereference in xe_migrate_copy. To avoid this situation, update lacks source flag to true for this case, the flag will trigger xe_migrate_clear rather than xe_migrate_copy. Issue trace: <7> [317.089847] xe 0000:00:02.0: [drm:xe_migrate_copy [xe]] Pass 14, sizes: 4194304 & 4194304 <7> [317.089945] xe 0000:00:02.0: [drm:xe_migrate_copy [xe]] Pass 15, sizes: 4194304 & 4194304 <1> [317.128055] BUG: kernel NULL pointer dereference, address: 0000000000000010 <1> [317.128064] #PF: supervisor read access in kernel mode <1> [317.128066] #PF: error_code(0x0000) - not-present page <6> [317.128069] PGD 0 P4D 0 <4> [317.128071] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI <4> [317.128074] CPU: 1 UID: 0 PID: 1440 Comm: kunit_try_catch Tainted: G U N 6.11.0-rc7-xe #1 <4> [317.128078] Tainted: [U]=USER, [N]=TEST <4> [317.128080] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3221.D80.2407291239 07/29/2024 <4> [317.128082] RIP: 0010:xe_migrate_copy+0x66/0x13e0 [xe] <4> [317.128158] Code: 00 00 48 89 8d e0 fe ff ff 48 8b 40 10 4c 89 85 c8 fe ff ff 44 88 8d bd fe ff ff 65 48 8b 3c 25 28 00 00 00 48 89 7d d0 31 ff <8b> 79 10 48 89 85 a0 fe ff ff 48 8b 00 48 89 b5 d8 fe ff ff 83 ff <4> [317.128162] RSP: 0018:ffffc9000167f9f0 EFLAGS: 00010246 <4> [317.128164] RAX: ffff8881120d8028 RBX: ffff88814d070428 RCX: 0000000000000000 <4> [317.128166] RDX: ffff88813cb99c00 RSI: 0000000004000000 RDI: 0000000000000000 <4> [317.128168] RBP: ffffc9000167fbb8 R08: ffff88814e7b1f08 R09: 0000000000000001 <4> [317.128170] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88814e7b1f08 <4> [317.128172] R13: ffff88814e7b1f08 R14: ffff88813cb99c00 R15: 0000000000000001 <4> [317.128174] FS: 0000000000000000(0000) GS:ffff88846f280000(0000) knlGS:0000000000000000 <4> [317.128176] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [317.128178] CR2: 0000000000000010 CR3: 000000011f676004 CR4: 0000000000770ef0 <4> [317.128180] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4> [317.128182] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 <4> [317.128184] PKRU: 55555554 <4> [317.128185] Call Trace: <4> [317.128187] <TASK> <4> [317.128189] ? show_regs+0x67/0x70 <4> [317.128194] ? __die_body+0x20/0x70 <4> [317.128196] ? __die+0x2b/0x40 <4> [317.128198] ? page_fault_oops+0x15f/0x4e0 <4> [317.128203] ? do_user_addr_fault+0x3fb/0x970 <4> [317.128205] ? lock_acquire+0xc7/0x2e0 <4> [317.128209] ? exc_page_fault+0x87/0x2b0 <4> [317.128212] ? asm_exc_page_fault+0x27/0x30 <4> [317.128216] ? xe_migrate_copy+0x66/0x13e0 [xe] <4> [317.128263] ? __lock_acquire+0xb9d/0x26f0 <4> [317.128265] ? __lock_acquire+0xb9d/0x26f0 <4> [317.128267] ? sg_free_append_table+0x20/0x80 <4> [317.128271] ? lock_acquire+0xc7/0x2e0 <4> [317.128273] ? mark_held_locks+0x4d/0x80 <4> [317.128275] ? trace_hardirqs_on+0x1e/0xd0 <4> [317.128278] ? _raw_spin_unlock_irqrestore+0x31/0x60 <4> [317.128281] ? __pm_runtime_resume+0x60/0xa0 <4> [317.128284] xe_bo_move+0x682/0xc50 [xe] <4> [317.128315] ? lock_is_held_type+0xaa/0x120 <4> [317.128318] ttm_bo_handle_move_mem+0xe5/0x1a0 [ttm] <4> [317.128324] ttm_bo_validate+0xd1/0x1a0 [ttm] <4> [317.128328] shrink_test_run_device+0x721/0xc10 [xe] <4> [317.128360] ? find_held_lock+0x31/0x90 <4> [317.128363] ? lock_release+0xd1/0x2a0 <4> [317.128365] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] <4> [317.128370] xe_bo_shrink_kunit+0x11/0x20 [xe] <4> [317.128397] kunit_try_run_case+0x6e/0x150 [kunit] <4> [317.128400] ? trace_hardirqs_on+0x1e/0xd0 <4> [317.128402] ? _raw_spin_unlock_irqrestore+0x31/0x60 <4> [317.128404] kunit_generic_run_threadfn_adapter+0x1e/0x40 [kunit] <4> [317.128407] kthread+0xf5/0x130 <4> [317.128410] ? __pfx_kthread+0x10/0x10 <4> [317.128412] ret_from_fork+0x39/0x60 <4> [317.128415] ? __pfx_kthread+0x10/0x10 <4> [317.128416] ret_from_fork_asm+0x1a/0x30 <4> [317.128420] </TASK> Fixes: 266c8588 ("drm/xe/xe2: Handle flat ccs move for igfx.") Signed-off-by:
Zhanjun Dong <zhanjun.dong@intel.com> Reviewed-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240927161308.862323-2-zhanjun.dong@intel.com (cherry picked from commit 59a1c9c7e1d02b43b415ea92627ce095b7c79e47) Signed-off-by:
-
José Roberto de Souza authored
Mesa testing on Xe2+ revealed that when OA metrics are collected for an exec_queue, after the OA stream is closed, future batch buffers submitted on that exec_queue do not complete. Not resetting OAC_CONTEXT_ENABLE on OA stream close resolves these hangs and should not have any adverse effects. v2: Make the change that we don't reset the bit clearer (Ashutosh) Also make the same fix for OAC as OAR (Ashutosh) Bspec: 60314 Fixes: 2f4a730f ("drm/xe/oa: Add OAR support") Fixes: 14e077f8 ("drm/xe/oa: Add OAC support") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2821Signed-off-by:José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: stable@vger.kernel.org Reviewed-by:
-
Matthew Auld authored
Evil user can guess the next id of the queue before the ioctl completes and then call queue destroy ioctl to trigger UAF since create ioctl is still referencing the same queue. Move the xa_alloc all the way to the end to prevent this. v2: - Rebase Fixes: 2149ded6 ("drm/xe: Fix use after free when client stats are captured") Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by:
Nirmoy Das <nirmoy.das@intel.com> Reviewed-by:
-
Matthew Auld authored
Evil user can guess the next id of the vm before the ioctl completes and then call vm destroy ioctl to trigger UAF since create ioctl is still referencing the same vm. Move the xa_alloc all the way to the end to prevent this. v2: - Rebase Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by:
-
Matthew Brost authored
Both the VM / exec queue file lock protect the lookup and reference to the object, nothing more. These locks are not intended anything else underneath them. XA have their own locking too, so no need to take the VM / exec queue file lock aside from when doing a lookup and reference get. Add some kernel doc to make this clear and cleanup a few typos too. Signed-off-by:
-
Matthew Brost authored
Not starting the TDR after GT reset on exec queue which have been restarted can lead to jobs being able to be run forever. Fix this by restarting the TDR. Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by:
-
Gustavo Sousa authored
A recommended performance tuning for LNL related to L3 cache flushing was recently introduced in Bspec. Implement it. Unlike the other existing tuning settings, we limit this one for LNL only, since there is no info about whether this would be applicable to other platforms yet. In the future we can come back and use IP version ranges if applicable. v2: - Fix reference to Bspec. (Sai Teja, Tejas) - Use correct register name for "Tuning: L3 RW flush all Cache". (Sai Teja) - Use SCRATCH3_LBCF (with the underscore) for better readability. v3: - Limit setting to LNL only. (Matt) Bspec: 72161 Cc: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Signed-off-by:
-
Gustavo Sousa authored
With exception of "Tuning: L3 cache - media", we are currently applying recommended performance tuning settings only for the primary GT. Let's also implement them for the media GT when applicable. According to our spec, media GT registers CCCHKNREG1 and L3SQCREG* exist only in Xe2_LPM and their offsets do not match their primary GT counterparts. Furthermore, the range where CCCHKNREG1 belongs is not listed as a multicast range on the media GT. As such, we need to have Xe2_LPM-specific definitions for those registers and apply the setting only for that specific IP. Both Xe2_HPM and Xe2_LPM contain STATELESS_COMPRESSION_CTRL and the offset on the media GT matches the one on the primary one. So we can simply have a copy of "Tuning: Stateless compression control" for the media GT. v2: - Fix implementation with respect to multicast vs non-multicast registers. (Matt) - Add missing XE2LPM_CCCHKNREG1 on second action of "Tuning: Compression Overfetch - media". v3: - STATELESS_COMPRESSION_CTRL on Xe2_HPM is also a multicast register, do not define a XE2HPM_STATELESS_COMPRESSION_CTRL register. (Tejas) Bspec: 72161 Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: -
Gustavo Sousa authored
According to Bspec, Xe2 steering tables must be used for Xe2_HPM, just as it is with Xe2_LPM. Update our driver to reflect that. Bspec: 71186 Reviewed-by:
-
Matthew Brost authored
Normalize both code paths with a helper. Fixes a possible leak access counter path too. Suggested-by:
-
Matthew Brost authored
Remove contention from GPU fault path for ASID->VM lookup. Signed-off-by:
Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240918054436.1971839-1-matthew.brost@intel.com (cherry picked from commit 1378c633a3fbfeb344c486ffda0e920a21e62712) Signed-off-by:
-
He Lugang authored
Use devm_add_action_or_reset() to release resources in case of failure, because the cleanup function will be automatically called. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
He Lugang <helugang@uniontech.com> Link: https://patchwork.freedesktop.org/patch/msgid/9631BC17D1E028A2+20240911102215.84865-1-helugang@uniontech.comSigned-off-by:
-
Matthew Auld authored
We currently do stuff like queuing the final destruction step on a random system wq, which will outlive the driver instance. With bad timing we can teardown the driver with one or more work workqueue still being alive leading to various UAF splats. Add a fini step to ensure user queues are properly torn down. At this point GuC should already be nuked so queue itself should no longer be referenced from hw pov. v2 (Matt B) - Looks much safer to use a waitqueue and then just wait for the xa_array to become empty before triggering the drain. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2317 Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by:
-
Matthew Auld authored
Any non-wedged queue can have a zero refcount here and can be running concurrently with an async queue destroy, therefore dereferencing the queue ptr to check wedge status after the lookup can trigger UAF if queue is not wedged. Fix this by keeping the submission_state lock held around the check to postpone the free and make the check safe, before dropping again around the put() to avoid the deadlock. Fixes: 8ed9aaae ("drm/xe: Force wedged state and block GT reset upon any GPU hang") Signed-off-by:
-
Rodrigo Vivi authored
The pci state was saved, but not restored. Restore right after the power state transition request like every other driver. v2: Use right fixes tag, since this was there initialy, but accidentally removed. Fixes: f6761c68 ("drm/xe/display: Improve s2idle handling.") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit ec2d1539e159f53eae708e194c449cfefa004994) Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2024-10-02' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes - One fix for bitwise and logical "and" mixup in PM code Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-fixes-2024-10-02' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Short summary of fixes pull: panthor: - Set FOP_UNSIGNED_OFFSET in fops instance - Acquire lock in panthor_vm_prepare_map_op_ctx() - Avoid ninitialized variable in tick_ctx_cleanup() - Do not block scheduler queue if work is pending - Do not add write fences to the shared BOs scheduler: - Fix locking in drm_sched_entity_modify_sched() - Fix pointer deref if entity queue changes Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.12-2024-10-02' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.12-2024-10-02: amdgpu: - DML2 fix - DSC fix - Dispclk fix - eDP HDR fix - IPS fix - TBT fix Signed-off-by:
-
- 01 Oct, 2024 13 commits
-
-
Tom Chung authored
[Why] Connected with a Thunderbolt monitor and do the suspend and the system may hang while resume. The TBT monitor HPD will be triggered during the resume procedure and call the drm_client_modeset_probe() while struct drm_connector connector->dev->master is NULL. It will mess up the pipe topology after resume. [How] Skip the TBT monitor HPD during the resume procedure because we currently will probe the connectors after resume by default. Reviewed-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Fangzhi Zuo <jerry.zuo@amd.com> Tested-by:
-
Leo Li authored
[Why] There are more IPS modes other than DMUB_IPS_ENABLE that enables IPS. We need to enable the hotplug detect idle workqueue for those modes as well. [How] Modify the if condition to initialize the workqueue in all IPS modes except for DMUB_IPS_DISABLE_ALL. Fixes: 65444581 ("drm/amd/display: Determine IPS mode by ASIC and PMFW versions") Signed-off-by:
Leo Li <sunpeng.li@amd.com> Reviewed-by:
Roman Li <roman.li@amd.com> Tested-by:
-
Alex Hung authored
[WHY & HOW] Some eDP panels suffer from flicking when HDR is enabled in KDE. This quirk works around it by skipping VSC that is incompatible with eDP panels. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3151 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
Charlene Liu authored
[why] set dispclk to 0 cause stability issue. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Charlene Liu <Charlene.Liu@amd.com> Signed-off-by:
-
Fangzhi Zuo authored
Existing last step of dsc policy is to restore pbn value under minimum compression when try to greedily disable dsc for a stream failed to fit in MST bw. Optimized dsc params result from optimization step is not necessarily the minimum compression, therefore it is not correct to restore the pbn under minimum compression rate. Restore the pbn under minimum compression instead of the value from optimized pbn could result in the dsc params not correct at the modeset where atomic_check failed due to not enough bw. One or more monitors connected could not light up in such case. Restore the optimized pbn value, instead of using the pbn value under minimum compression. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
-
Yihan Zhu authored
[WHY & HOW] Mismatch in DCN35 DML2 cause bw validation failed to acquire unexpected DPP pipe to cause grey screen and system hang. Remove EnhancedPrefetchScheduleAccelerationFinal value override to match HW spec. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by:
-
Boris Brezillon authored
The only user (the mesa gallium driver) is already assuming explicit synchronization and doing the export/import dance on shared BOs. The only reason we were registering ourselves as writers on external BOs is because Xe, which was the reference back when we developed Panthor, was doing so. Turns out Xe was wrong, and we really want bookkeep on all registered fences, so userspace can explicitly upgrade those to read/write when needed. Fixes: 4bdca115 ("drm/panthor: Add the driver frontend block") Cc: Matthew Brost <matthew.brost@intel.com> Cc: Simona Vetter <simona.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Steven Price <steven.price@arm.com> Reviewed-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240905070155.3254011-1-boris.brezillon@collabora.com
-
Boris Brezillon authored
If deferred operations are pending, we want to wait for those to land before declaring the queue blocked on a SYNC_WAIT. We need this to deal with the case where the sync object is signalled through a deferred SYNC_{ADD,SET} from the same queue. If we don't do that and the group gets scheduled out before the deferred SYNC_{SET,ADD} is executed, we'll end up with a timeout, because no external SYNC_{SET,ADD} will make the scheduler reconsider the group for execution. Fixes: de854881 ("drm/panthor: Add the scheduler logical block") Cc: <stable@vger.kernel.org> Signed-off-by: -
Boris Brezillon authored
The group variable can't be used to retrieve ptdev in our second loop, because it points to the previously iterated list_head, not a valid group. Get the ptdev object from the scheduler instead. Cc: <stable@vger.kernel.org> Fixes: d72f0490 ("drm/panthor: Allow driver compilation") Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Julia Lawall <julia.lawall@inria.fr> Closes: https://lore.kernel.org/r/202409302306.UDikqa03-lkp@intel.com/Signed-off-by:
-
Boris Brezillon authored
drm_gpuvm_bo_obtain_prealloc() will call drm_gpuvm_bo_put() on our pre-allocated BO if the <BO,VM> association exists. Given we only have one ref on preallocated_vm_bo, drm_gpuvm_bo_destroy() will be called immediately, and we have to hold the VM resv lock when calling this function. Fixes: 647810ec ("drm/panthor: Add the MMU/VM logical block") Signed-off-by:
-
Liviu Dudau authored
Since commit 641bb439 ("fs: move FMODE_UNSIGNED_OFFSET to fop_flags") the FMODE_UNSIGNED_OFFSET flag has been moved to fop_flags and renamed, but the patch failed to make the changes for the panthor driver. When user space opens the render node the WARN() added by the patch gets triggered. Fixes: 641bb439 ("fs: move FMODE_UNSIGNED_OFFSET to fop_flags") Cc: Christian Brauner <brauner@kernel.org> Signed-off-by:
Christian Brauner <brauner@kernel.org> Tested-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Maarten Lankhorst authored
Required for a panthor fix that broke when FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET. Signed-off-by: -
Jani Nikula authored
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND is an int, defaulting to 250. When the wakeref is non-zero, it's either -1 or a dynamically allocated pointer, depending on CONFIG_DRM_I915_DEBUG_RUNTIME_PM. It's likely that the code works by coincidence with the bitwise AND, but with CONFIG_DRM_I915_DEBUG_RUNTIME_PM=y, there's the off chance that the condition evaluates to false, and intel_wakeref_auto() doesn't get called. Switch to the intended logical AND. v2: Use != to avoid clang -Wconstant-logical-operand (Nathan) Fixes: ad74457a ("drm/i915/dgfx: Release mmap on rpm suspend") Cc: Matthew Auld <matthew.auld@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: stable@vger.kernel.org # v6.1+ Reviewed-by:
Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 4c1bfe259ed1d2ade826f95d437e1c41b274df04) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
- 30 Sep, 2024 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-misc-fixes-2024-09-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Short summary of fixes pull: atomic: - Use correct type when reading damage rectangles display: - Fix kernel docs dp-mst: - Fix DSC decompression detection hdmi: - Fix infoframe size panthor: - Fix locking sched: - Update maintainers - Fix race condition whne queueing up jobs sysfb: - Disable sysfb if framebuffer parent device is unknown vbox: - Fix VLA handling Signed-off-by:
-
