Introduce a new nofault flag to indicate to iov_iter_get_pages not to
fault in user pages.

This is implemented by passing the FOLL_NOFAULT flag to get_user_pages,
which causes get_user_pages to fail when it would otherwise fault in a
page. We'll use the ->nofault flag to prevent iomap_dio_rw from faulting
in pages when page faults are not allowed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Introduce a new FOLL_NOFAULT flag that causes get_user_pages to return
-EFAULT when it would otherwise trigger a page fault.  This is roughly
similar to FOLL_FAST_ONLY but available on all architectures, and less
fragile.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Add a done_before argument to iomap_dio_rw that indicates how much of
the request has already been transferred.  When the request succeeds, we
report that done_before additional bytes were tranferred.  This is
useful for finishing a request asynchronously when part of the request
has already been completed synchronously.

We'll use that to allow iomap_dio_rw to be used with page faults
disabled: when a page fault occurs while submitting a request, we
synchronously complete the part of the request that has already been
submitted.  The caller can then take care of the page fault and call
iomap_dio_rw again for the rest of the request, passing in the number of
bytes already tranferred.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>

In iomap_dio_rw, when iomap_apply returns an -EFAULT error and the
IOMAP_DIO_PARTIAL flag is set, complete the request synchronously and
return a partial result.  This allows the caller to deal with the page
fault and retry the remainder of the request.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>

When a user copy fails in one of the helpers of iomap_dio_rw, fail with
-EFAULT instead of returning 0.  This matches what iomap_dio_bio_actor
returns when it gets an -EFAULT from bio_iov_iter_get_pages.  With these
changes, iomap_dio_actor now consistently fails with -EFAULT when a user
page cannot be faulted in.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

In the .read_iter and .write_iter file operations, we're accessing
user-space memory while holding the inode glock.  There is a possibility
that the memory is mapped to the same file, in which case we'd recurse
on the same glock.

We could detect and work around this simple case of recursive locking,
but more complex scenarios exist that involve multiple glocks,
processes, and cluster nodes, and working around all of those cases
isn't practical or even possible.

Avoid these kinds of problems by disabling page faults while holding the
inode glock.  If a page fault would occur, we either end up with a
partial read or write or with -EFAULT if nothing could be read or
written.  In either case, we know that we're not done with the
operation, so we indicate that we're willing to give up the inode glock
and then we fault in the missing pages.  If that made us lose the inode
glock, we return a partial read or write.  Otherwise, we resume the
operation.

This locking problem was originally reported by Jan Kara.  Linus came up
with the idea of disabling page faults.  Many thanks to Al Viro and
Matthew Wilcox for their feedback.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Now that gfs2_file_buffered_write is the only remaining user of
ip->i_gh, we can move the glock holder to the stack (or rather, use the
one we already have on the stack); there is no need for keeping the
holder in the inode anymore.

This is slightly complicated by the fact that we're using ip->i_gh for
the statfs inode in gfs2_file_buffered_write as well.  Writing to the
statfs inode isn't very common, so allocate the statfs holder
dynamically when needed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

So far, for buffered writes, we were taking the inode glock in
gfs2_iomap_begin and dropping it in gfs2_iomap_end with the intention of
not holding the inode glock while iomap_write_actor faults in user
pages.  It turns out that iomap_write_actor is called inside iomap_begin
... iomap_end, so the user pages were still faulted in while holding the
inode glock and the locking code in iomap_begin / iomap_end was
completely pointless.

Move the locking into gfs2_file_buffered_write instead.  We'll take care
of the potential deadlocks due to faulting in user pages while holding a
glock in a subsequent patch.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

This patch introduces a new HIF_MAY_DEMOTE flag and infrastructure that
will allow glocks to be demoted automatically on locking conflicts.
When a locking request comes in that isn't compatible with the locking
state of an active holder and that holder has the HIF_MAY_DEMOTE flag
set, the holder will be demoted before the incoming locking request is
granted.

Note that this mechanism demotes active holders (with the HIF_HOLDER
flag set), while before we were only demoting glocks without any active
holders.  This allows processes to keep hold of locks that may form a
cyclic locking dependency; the core glock logic will then break those
dependencies in case a conflicting locking request occurs.  We'll use
this to avoid giving up the inode glock proactively before faulting in
pages.

Processes that allow a glock holder to be taken away indicate this by
calling gfs2_holder_allow_demote(), which sets the HIF_MAY_DEMOTE flag.
Later, they call gfs2_holder_disallow_demote() to clear the flag again,
and then they check if their holder is still queued: if it is, they are
still holding the glock; if it isn't, they can re-acquire the glock (or
abort).
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Pass the first current glock holder into function may_grant and
deobfuscate the logic there.

While at it, switch from BUG_ON to GLOCK_BUG_ON in may_grant.  To make
that build cleanly, de-constify the may_grant arguments.

We're now using function find_first_holder in do_promote, so move the
function's definition above do_promote.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Add a wrapper around iomap_file_buffered_write.  We'll add code for when
the operation needs to be retried here later.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Introduce a new fault_in_iov_iter_writeable helper for safely faulting
in an iterator for writing.  Uses get_user_pages() to fault in the pages
without actually writing to them, which would be destructive.

We'll use fault_in_iov_iter_writeable in gfs2 once we've determined that
the iterator passed to .read_iter isn't in memory.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Turn iov_iter_fault_in_readable into a function that returns the number
of bytes not faulted in, similar to copy_to_user, instead of returning a
non-zero value when any of the requested pages couldn't be faulted in.
This supports the existing users that require all pages to be faulted in
as well as new users that are happy if any pages can be faulted in.

Rename iov_iter_fault_in_readable to fault_in_iov_iter_readable to make
sure this change doesn't silently break things.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Turn fault_in_pages_{readable,writeable} into versions that return the
number of bytes not faulted in, similar to copy_to_user, instead of
returning a non-zero value when any of the requested pages couldn't be
faulted in.  This supports the existing users that require all pages to
be faulted in as well as new users that are happy if any pages can be
faulted in.

Rename the functions to fault_in_{readable,writeable} to make sure
this change doesn't silently break things.

Neither of these functions is entirely trivial and it doesn't seem
useful to inline them, so move them to mm/gup.c.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

When switching from __get_user to fault_in_pages_readable, commit
9f9eae5c broke kvm_use_magic_page: like __get_user,
fault_in_pages_readable returns 0 on success.

Fixes: 9f9eae5c ("powerpc/kvm: Prefer fault_in_pages_readable function")
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Both iov_iter_get_pages and iov_iter_get_pages_alloc return the number
of bytes of the iovec they could get the pages for.  When they cannot
get any pages, they're supposed to return 0, but when the start of the
iovec isn't page aligned, the calculation goes wrong and they return a
negative value.  Fix both functions.

In addition, change iov_iter_get_pages_alloc to return NULL in that case
to prevent resource leaks.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Pull powerpc fixes from Michael Ellerman:
 "A bit of a big batch, partly because I didn't send any last week, and
  also just because the BPF fixes happened to land this week.

  Summary:

   - Fix a regression hit by the IPR SCSI driver, introduced by the
     recent addition of MSI domains on pseries.

   - A big series including 8 BPF fixes, some with potential security
     impact and the rest various code generation issues.

   - Fix our program check assembler entry path, which was accidentally
     jumping into a gas macro and generating strange stack frames, which
     could confuse find_bug().

   - A couple of fixes, and related changes, to fix corner cases in our
     machine check handling.

   - Fix our DMA IOMMU ops, which were not always returning the optimal
     DMA mask, leading to at least one device falling back to 32-bit DMA
     when it shouldn't.

   - A fix for KUAP handling on 32-bit Book3S.

   - Fix crashes seen when kdumping on some pseries systems.

  Thanks to Naveen N. Rao, Nicholas Piggin, Alexey Kardashevskiy, Cédric
  Le Goater, Christophe Leroy, Mahesh Salgaonkar, Abdul Haleem,
  Christoph Hellwig, Johan Almbladh, Stan Johnson"

* tag 'powerpc-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  pseries/eeh: Fix the kdump kernel crash during eeh_pseries_init
  powerpc/32s: Fix kuap_kernel_restore()
  powerpc/pseries/msi: Add an empty irq_write_msi_msg() handler
  powerpc/64s: Fix unrecoverable MCE calling async handler from NMI
  powerpc/64/interrupt: Reconcile soft-mask state in NMI and fix false BUG
  powerpc/64: warn if local irqs are enabled in NMI or hardirq context
  powerpc/traps: do not enable irqs in _exception
  powerpc/64s: fix program check interrupt emergency stack path
  powerpc/bpf ppc32: Fix BPF_SUB when imm == 0x80000000
  powerpc/bpf ppc32: Do not emit zero extend instruction for 64-bit BPF_END
  powerpc/bpf ppc32: Fix JMP32_JSET_K
  powerpc/bpf ppc32: Fix ALU32 BPF_ARSH operation
  powerpc/bpf: Emit stf barrier instruction sequences for BPF_NOSPEC
  powerpc/security: Add a helper to query stf_barrier type
  powerpc/bpf: Fix BPF_SUB when imm == 0x80000000
  powerpc/bpf: Fix BPF_MOD when imm == 1
  powerpc/bpf: Validate branch ranges
  powerpc/lib: Add helper to check if offset is within conditional branch range
  powerpc/iommu: Report the correct most efficient DMA mask for PCI devices

Pull objtool fixes from Borislav Petkov:

 - Remove an extra section.len member in favour of section.sh_size

 - Align .altinstructions section creation with the kernel's by creating
   them with entry size of 0

 - Fix objtool to convert a reloc symbol to a section offset and not to
   not warn about not knowing how

* tag 'objtool_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Remove redundant 'len' field from struct section
  objtool: Make .altinstructions section entry size consistent
  objtool: Remove reloc symbol type checks in get_alt_entry()

Pull x86 fixes from Borislav Petkov:

 - A FPU fix to properly handle invalid MXCSR values: 32-bit masks them
   out due to historical reasons and 64-bit kernels reject them

 - A fix to clear X86_FEATURE_SMAP when support for is not
   config-enabled

 - Three fixes correcting misspelled Kconfig symbols used in code

 - Two resctrl object cleanup fixes

 - Yet another attempt at fixing the neverending saga of botched x86
   timers, this time because some incredibly smart hardware decides to
   turn off the HPET timer in a low power state - who cares if the OS is
   relying on it...

 - Check the full return value range of an SEV VMGEXIT call to determine
   whether it returned an error

* tag 'x86_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Restore the masking out of reserved MXCSR bits
  x86/Kconfig: Correct reference to MWINCHIP3D
  x86/platform/olpc: Correct ifdef symbol to intended CONFIG_OLPC_XO15_SCI
  x86/entry: Clear X86_FEATURE_SMAP when CONFIG_X86_SMAP=n
  x86/entry: Correct reference to intended CONFIG_64_BIT
  x86/resctrl: Fix kfree() of the wrong type in domain_add_cpu()
  x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails
  x86/hpet: Use another crystalball to evaluate HPET usability
  x86/sev: Return an error on a returned non-zero SW_EXITINFO1[31:0]

Pull i2c fixes from Wolfram Sang:
 "Three driver bugfixes and one leak fix for the core"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mlxcpld: Modify register setting for 400KHz frequency
  i2c: mlxcpld: Fix criteria for frequency setting
  i2c: mediatek: Add OFFSET_EXT_CONF setting back
  i2c: acpi: fix resource leak in reconfiguration device addition

Pull SCSI fixes from James Bottomley:
 "Five fixes, all in drivers.

  The big change is the UFS task management rework, with lpfc next and
  the rest being fairly minor and obvious fixes"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: iscsi: Fix iscsi_task use after free
  scsi: lpfc: Fix memory overwrite during FC-GS I/O abort handling
  scsi: elx: efct: Delete stray unlock statement
  scsi: ufs: core: Fix task management completion
  scsi: acornscsi: Remove scsi_cmd_to_tag() reference

Pull block fixes from Jens Axboe:
 "Two small fixes for this release:

   - Add missing QUEUE_FLAG_HCTX_ACTIVE in the debugfs handling
     (Johannes)

   - Fix double free / UAF issue in __alloc_disk_node (Tetsuo)"

* tag 'block-5.15-2021-10-09' of git://git.kernel.dk/linux-block:
  block: decode QUEUE_FLAG_HCTX_ACTIVE in debugfs output
  block: genhd: fix double kfree() in __alloc_disk_node()

Pull ksmbd fixes from Steve French:
 "Six fixes for the ksmbd kernel server, including two additional
  overflow checks, a fix for oops, and some cleanup (e.g. remove dead
  code for less secure dialects that has been removed)"

* tag '5.15-rc4-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: fix oops from fuse driver
  ksmbd: fix version mismatch with out of tree
  ksmbd: use buf_data_size instead of recalculation in smb3_decrypt_req()
  ksmbd: remove the leftover of smb2.0 dialect support
  ksmbd: check strictly data area in ksmbd_smb2_check_message()
  ksmbd: add the check to vaildate if stream protocol length exceeds maximum value

Pull RISC-V fixes from Palmer Dabbelt:

 - A pair of fixes (along with the necessory cleanup) to our VDSO, to
   avoid a locking during OOM and to prevent the text from overflowing
   into the data page

 - A fix to checksyscalls to teach it about our rv32 UABI

 - A fix to add clone3() to the rv32 UABI, which was pointed out by
   checksyscalls

 - A fix to properly flush the icache on the local CPU in addition to
   the remote CPUs

* tag 'riscv-for-linus-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  checksyscalls: Unconditionally ignore fstat{,at}64
  riscv: Flush current cpu icache before other cpus
  RISC-V: Include clone3() on rv32
  riscv/vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
  riscv/vdso: Move vdso data page up front
  riscv/vdso: Refactor asm/vdso.h

Pull s390 fixes from Vasily Gorbik:

 - Fix potential memory leak on a error path in eBPF

 - Fix handling of zpci device on reserve

* tag 's390-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix zpci_zdev_put() on reserve
  bpf, s390: Fix potential memory leak about jit_data

Pull xtensa fixes from Max Filippov:

 - fix build/boot issues caused by CONFIG_OF vs CONFIC_USE_OF usage

 - fix reset handler for xtfpga boards

* tag 'xtensa-20211008' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: xtfpga: Try software restart before simulating CPU reset
  xtensa: xtfpga: use CONFIG_USE_OF instead of CONFIG_OF
  xtensa: call irqchip_init only when CONFIG_USE_OF is selected
  xtensa: use CONFIG_USE_OF instead of CONFIG_OF

Pull xen fixes from Juergen Gross:

 - fix two minor issues in the Xen privcmd driver plus a cleanup patch
   for that driver

 - fix multiple issues related to running as PVH guest and some related
   earlyprintk fixes for other Xen guest types

 - fix an issue introduced in 5.15 the Xen balloon driver

* tag 'for-linus-5.15b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: fix cancelled balloon action
  xen/x86: adjust data placement
  x86/PVH: adjust function/data placement
  xen/x86: hook up xen_banner() also for PVH
  xen/x86: generalize preferred console model from PV to PVH Dom0
  xen/x86: make "earlyprintk=xen" work for HVM/PVH DomU
  xen/x86: allow "earlyprintk=xen" to work for PV Dom0
  xen/x86: make "earlyprintk=xen" work better for PVH Dom0
  xen/x86: allow PVH Dom0 without XEN_PV=y
  xen/x86: prevent PVH type from getting clobbered
  xen/privcmd: drop "pages" parameter from xen_remap_pfn()
  xen/privcmd: fix error handling in mmap-resource processing
  xen/privcmd: replace kcalloc() by kvcalloc() when allocating empty pages

Merge tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic fixes from Arnd Bergmann:
 "There is one build fix for Arm platforms that ended up impacting most
  architectures because of the way the drivers/firmware Kconfig file is
  wired up:

  The CONFIG_QCOM_SCM dependency have caused a number of randconfig
  regressions over time, and some still remain in v5.15-rc4. The fix we
  agreed on in the end is to make this symbol selected by any driver
  using it, and then building it even for non-Arm platforms with
  CONFIG_COMPILE_TEST.

  To make this work on all architectures, the drivers/firmware/Kconfig
  file needs to be included for all architectures to make the symbol
  itself visible.

  In a separate discussion, we found that a sound driver patch that is
  pending for v5.16 needs the same change to include this Kconfig file,
  so the easiest solution seems to have my Kconfig rework included in
  v5.15.

  Finally, the branch also includes a small unrelated build fix for
  NOMMU architectures"

Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/

* tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere
  qcom_scm: hide Kconfig symbol
  firmware: include drivers/firmware/Kconfig unconditionally

Pull ACPI fix from Rafael Wysocki:
 "Fix a recent ACPI-related regression in the PCI subsystem that
  introduced a NULL pointer dereference possible to trigger from
  user space via sysfs on some systems"

* tag 'acpi-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PCI: ACPI: Check parent pointer in acpi_pci_find_companion()

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.15-rc5 that resolve a number of
  reported issues:

   - gadget driver fixes

   - xhci build warning fixes

   - build configuration fix

   - cdc-acm tty handling fixes

   - cdc-wdm fix

   - typec fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: cdc-acm: fix break reporting
  USB: cdc-acm: fix racy tty buffer accesses
  usb: gadget: f_uac2: fixed EP-IN wMaxPacketSize
  usb: cdc-wdm: Fix check for WWAN
  usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle
  usb: typec: tcpm: handle SRC_STARTUP state if cc changes
  usb: typec: tcpci: don't handle vSafe0V event if it's not enabled
  usb: typec: tipd: Remove dependency on "connector" child fwnode
  Partially revert "usb: Kconfig: using select for USB_COMMON dependency"
  usb: dwc3: gadget: Revert "set gadgets parent to the right controller"
  usb: xhci: tegra: mark PM functions as __maybe_unused

Pull MMC fixes from Ulf Hansson:
 "A couple of MMC host fixes:

   - meson-gx: Fix read/write access for dram-access-quirk

   - sdhci-of-at91: Fix calibration sequence"

* tag 'mmc-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirk
  mmc: sdhci-of-at91: replace while loop with read_poll_timeout
  mmc: sdhci-of-at91: wait for calibration done before proceed

Pull drm fixes from Dave Airlie:
 "I've returned from my tropical island retreat, even managed to bring
  one of my kids on a dive with some turtles. Thanks to Daniel for doing
  last week's work.

  Otherwise this is the weekly fixes pull, it's a bit bigger because the
  vc4 reverts in your tree caused some problems with fixes in the
  drm-misc tree so it got left out last week, so this week has the misc
  fixes rebased without the vc4 pieces.

  Otherwise it's i915, amdgpu with the usual fixes and a scattering over
  other drivers.

  I expect things should calm down a bit more next week.

  core:
   - Kconfig fix for fb_simple vs simpledrm.

  i915:
   - Fix RKL HDMI audio
   - Fix runtime pm imbalance on i915_gem_shrink() error path
   - Fix Type-C port access before hw/sw state sync
   - Fix VBT backlight struct version/size check
   - Fix VT-d async flip on SKL/BXT with plane stretch workaround

  amdgpu:
   - DCN 3.1 DP alt mode fixes
   - S0ix gfxoff fix
   - Fix DRM_AMD_DC_SI dependencies
   - PCIe DPC handling fix
   - DCN 3.1 scaling fix
   - Documentation fix

  amdkfd:
   - Fix potential memory leak
   - IOMMUv2 init fixes

  vc4 (there were some hdmi fixes but things got reverted, sort it out
       later):
   - compiler fix

  nouveau:
   - Cursor fix
   - Fix ttm buffer moves for ampere gpu's by adding minimal
     acceleration support.
   - memory leak fixes

  rockchip:
   - crtc/clk fixup

  panel:
   - ili9341 Fix DT bindings indent
   - y030xx067a - yellow tint init seq fix

  gbefb:
   - Fix gbefb when built with COMPILE_TEST"

* tag 'drm-fixes-2021-10-08' of git://anongit.freedesktop.org/drm/drm: (33 commits)
  drm/amd/display: Fix detection of 4 lane for DPALT
  drm/amd/display: Limit display scaling to up to 4k for DCN 3.1
  drm/amd/display: Skip override for preferred link settings during link training
  drm/nouveau/debugfs: fix file release memory leak
  drm/nouveau/kms/nv50-: fix file release memory leak
  drm/nouveau: avoid a use-after-free when BO init fails
  DRM: delete DRM IRQ legacy midlayer docs
  video: fbdev: gbefb: Only instantiate device when built for IP32
  fbdev: simplefb: fix Kconfig dependencies
  drm/panel: abt-y030xx067a: yellow tint fix
  dt-bindings: panel: ili9341: correct indentation
  drm/nouveau/fifo/ga102: initialise chid on return from channel creation
  drm/rockchip: Update crtc fixup to account for fractional clk change
  drm/nouveau/ga102-: support ttm buffer moves via copy engine
  drm/nouveau/kms/tu102-: delay enabling cursor until after assign_windows
  drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup
  drm/vc4: hdmi: Remove unused struct
  drm/kmb: Enable alpha blended second plane
  drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume
  drm/amdgpu: init iommu after amdkfd device init
  ...

It made -Werror sad.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Ser Olmy reported a boot failure:

  init[1] bad frame in sigreturn frame:(ptrval) ip:b7c9fbe6 sp:bf933310 orax:ffffffff \
	  in libc-2.33.so[b7bed000+156000]
  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  CPU: 0 PID: 1 Comm: init Tainted: G        W         5.14.9 #1
  Hardware name: Hewlett-Packard HP PC/HP Board, BIOS  JD.00.06 12/06/2001
  Call Trace:
   dump_stack_lvl
   dump_stack
   panic
   do_exit.cold
   do_group_exit
   get_signal
   arch_do_signal_or_restart
   ? force_sig_info_to_task
   ? force_sig
   exit_to_user_mode_prepare
   syscall_exit_to_user_mode
   do_int80_syscall_32
   entry_INT80_32

on an old 32-bit Intel CPU:

  vendor_id       : GenuineIntel
  cpu family      : 6
  model           : 6
  model name      : Celeron (Mendocino)
  stepping        : 5
  microcode       : 0x3

Ser bisected the problem to the commit in Fixes.

tglx suggested reverting the rejection of invalid MXCSR values which
this commit introduced and replacing it with what the old code did -
simply masking them out to zero.

Further debugging confirmed his suggestion:

  fpu->state.fxsave.mxcsr: 0xb7be13b4, mxcsr_feature_mask: 0xffbf
  WARNING: CPU: 0 PID: 1 at arch/x86/kernel/fpu/signal.c:384 __fpu_restore_sig+0x51f/0x540

so restore the original behavior only for 32-bit kernels where you have
ancient machines with buggy hardware. For 32-bit programs on 64-bit
kernels, user space which supplies wrong MXCSR values is considered
malicious so fail the sigframe restoration there.

Fixes: 6f9866a1 ("x86/fpu/signal: Let xrstor handle the features to init")
Reported-by: Ser Olmy <ser.olmy@protonmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Ser Olmy <ser.olmy@protonmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/YVtA67jImg3KlBTw@zn.tnic

Merge tag 'amd-drm-fixes-5.15-2021-10-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.15-2021-10-06:

amdgpu:
- DCN 3.1 DP alt mode fixes
- S0ix gfxoff fix
- Fix DRM_AMD_DC_SI dependencies
- PCIe DPC handling fix
- DCN 3.1 scaling fix
- Documentation fix

amdkfd:
- Fix potential memory leak
- IOMMUv2 init fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006203828.4818-1-alexander.deucher@amd.com

Rebased drm-misc-fixes for v5.15-rc5:
- Dropped vc4 patches.
- Compiler fix for vc4.
- Cursor fix for nouveau.
- Fix ttm buffer moves for ampere gpu's by adding minimal acceleration support.
- Small rockchip fixes.
- Fix DT bindings indent for ili9341.
- Fix y030xx067a init sequence to not get a yellow tint.
- Kconfig fix for fb_simple vs simpledrm.
- Assorted nouvaeu memory leaks.
- Fix gbefb when built with COMPILE_TEST.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3272bf72-2c37-31eb-404e-cf7edd485c7d@linux.intel.com

Merge tag 'drm-intel-fixes-2021-10-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.15-rc5:
- Fix RKL HDMI audio
- Fix runtime pm imbalance on i915_gem_shrink() error path
- Fix Type-C port access before hw/sw state sync
- Fix VBT backlight struct version/size check
- Fix VT-d async flip on SKL/BXT with plane stretch workaround
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87k0ipywo4.fsf@intel.com

These can be replaced by statx().  Since rv32 has a 64-bit time_t we
just never ended up with them in the first place.  This is now an error
due to -Werror.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Pull nfsd fixes from Chuck Lever:
 "Bug fixes for NFSD error handling paths"

* tag 'nfsd-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: Keep existing listeners on portlist error
  SUNRPC: fix sign error causing rpcsec_gss drops
  nfsd: Fix a warning for nfsd_file_close_inode
  nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zero
  nfsd: fix error handling of register_pernet_subsys() in init_nfsd()