- 10 Aug, 2022 8 commits
-
-
Chih-Kang Chang authored
In order to set channel info to hal during HW scan, we add the update channel flow to support setting by parameters to meet the HW scan requriement. Signed-off-by:
Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220809084107.38137-4-pkshih@realtek.com
-
Chih-Kang Chang authored
Applying regulatory and getting Tx power table will access hal data, it should hold rtwdev::mutex to avoid hal data changed during setting flow. Signed-off-by:
-
Chih-Kang Chang authored
Applying SAR will access hal data, it should hold rtwdev::mutex to avoid hal data changed during setting flow. Signed-off-by:
-
Wataru Gohda authored
The skb will be allocated to send TIM update info in brcmf_fws_tim_update. Currently the skb will be freed when tx is failed but it will not be freed when tx is completed successfully. The fix is to free the skb when tx is completed always. Signed-off-by:
Wataru Gohda <wataru.gohda@cypress.com> Signed-off-by:
Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by:
-
Wataru Gohda authored
Conn_info->req_ie/resp_ie is used to indicate the assoc_req_ies / assoc_resp_ies to cfg80211 layer when connection is done. The buffer is freed and allocated again at next connection establishment. The buffers also needs to be freed at the timing of rmmod as well. Signed-off-by:
-
Wright Feng authored
The variable i is changed when setting random MAC address and causes invalid address access when printing the value of pi->reqs[i]->reqid. We replace reqs index with ri to fix the issue. [ 136.726473] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000 [ 136.737365] Mem abort info: [ 136.740172] ESR = 0x96000004 [ 136.743359] Exception class = DABT (current EL), IL = 32 bits [ 136.749294] SET = 0, FnV = 0 [ 136.752481] EA = 0, S1PTW = 0 [ 136.755635] Data abort info: [ 136.758514] ISV = 0, ISS = 0x00000004 [ 136.762487] CM = 0, WnR = 0 [ 136.765522] user pgtable: 4k pages, 48-bit VAs, pgdp = 000000005c4e2577 [ 136.772265] [0000000000000000] pgd=0000000000000000 [ 136.777160] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 136.782732] Modules linked in: brcmfmac(O) brcmutil(O) cfg80211(O) compat(O) [ 136.789788] Process wificond (pid: 3175, stack limit = 0x00000000053048fb) [ 136.796664] CPU: 3 PID: 3175 Comm: wificond Tainted: G O 4.19.42-00001-g531a5f5 #1 [ 136.805532] Hardware name: Freescale i.MX8MQ EVK (DT) [ 136.810584] pstate: 60400005 (nZCv daif +PAN -UAO) [ 136.815429] pc : brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac] [ 136.821811] lr : brcmf_pno_config_sched_scans+0x67c/0xa80 [brcmfmac] [ 136.828162] sp : ffff00000e9a3880 [ 136.831475] x29: ffff00000e9a3890 x28: ffff800020543400 [ 136.836786] x27: ffff8000b1008880 x26: ffff0000012bf6a0 [ 136.842098] x25: ffff80002054345c x24: ffff800088d22400 [ 136.847409] x23: ffff0000012bf638 x22: ffff0000012bf6d8 [ 136.852721] x21: ffff8000aced8fc0 x20: ffff8000ac164400 [ 136.858032] x19: ffff00000e9a3946 x18: 0000000000000000 [ 136.863343] x17: 0000000000000000 x16: 0000000000000000 [ 136.868655] x15: ffff0000093f3b37 x14: 0000000000000050 [ 136.873966] x13: 0000000000003135 x12: 0000000000000000 [ 136.879277] x11: 0000000000000000 x10: ffff000009a61888 [ 136.884589] x9 : 000000000000000f x8 : 0000000000000008 [ 136.889900] x7 : 303a32303d726464 x6 : ffff00000a1f957d [ 136.895211] x5 : 0000000000000000 x4 : ffff00000e9a3942 [ 136.900523] x3 : 0000000000000000 x2 : ffff0000012cead8 [ 136.905834] x1 : ffff0000012bf6d8 x0 : 0000000000000000 [ 136.911146] Call trace: [ 136.913623] brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac] [ 136.919658] brcmf_pno_start_sched_scan+0xa4/0x118 [brcmfmac] [ 136.925430] brcmf_cfg80211_sched_scan_start+0x80/0xe0 [brcmfmac] [ 136.931636] nl80211_start_sched_scan+0x140/0x308 [cfg80211] [ 136.937298] genl_rcv_msg+0x358/0x3f4 [ 136.940960] netlink_rcv_skb+0xb4/0x118 [ 136.944795] genl_rcv+0x34/0x48 [ 136.947935] netlink_unicast+0x264/0x300 [ 136.951856] netlink_sendmsg+0x2e4/0x33c [ 136.955781] __sys_sendto+0x120/0x19c Signed-off-by:
Wright Feng <wright.feng@cypress.com> Signed-off-by:
-
Wright Feng authored
We should not sleep while holding the spin lock. It makes 'scheduling while atomic' in brcmf_msgbuf_delete_flowring. And to avoid race condition between deleting flowring and txflow, we only hold spin lock when seting flowring status to RING_CLOSING. Signed-off-by:
-
Wright Feng authored
The race condition in brcmf_msgbuf_txflow and brcmf_msgbuf_delete_flowring makes tx_msghdr writing after brcmf_msgbuf_remove_flowring. Host driver should delete flowring after txflow complete and all txstatus back, or pend_8021x_cnt will never be zero and cause every connection 950 milliseconds(MAX_WAIT_FOR_8021X_TX) delay. Signed-off-by:
-
- 09 Aug, 2022 11 commits
-
-
Chia-Yuan Li authored
Correct IMR settings to let self error recover mechanism works accurately. Signed-off-by:
Chia-Yuan Li <leo.li@realtek.com> Signed-off-by:
-
Zong-Zhe Yang authored
It's unnecessary to iterate leaving PS mode. So, move it out of the iteration. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Sebin Sebastian authored
Remove braces around single statement blocks in order to improve readability. Also, an extra blank line was removed. Both warnings are reported by checkpatch.pl Signed-off-by:
Sebin Sebastian <mailmesebin00@gmail.com> Signed-off-by:
-
Ping-Ke Shih authored
Since IQK could spend time, we make a cache of IQK result matrix that looks like iqk_matrix[channel_idx].val[x][y], and we can reload the matrix if we have made a cache. To determine a cache is made, we check iqk_matrix[channel_idx].val[0][0]. The initial commit 7274a8c2 ("rtlwifi: rtl8192de: Merge phy routines") make a mistake that checks incorrect iqk_matrix[channel_idx].val[0] that is always true, and this mistake is found by commit ee3db469 ("wifi: rtlwifi: remove always-true condition pointed out by GCC 12"), so I recall the vendor driver to find fix and apply the correctness. Fixes: 7274a8c2 ("rtlwifi: rtl8192de: Merge phy routines") Signed-off-by:
-
Ruffalo Lavoisier authored
Remove repeated 'to' from 'to to' Signed-off-by:
Ruffalo Lavoisier <RuffaloLavoisier@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Ping-Ke Shih authored
Since chip_info has became const table, we must access them via const pointer to avoid invalid writing. Signed-off-by:
-
Zong-Zhe Yang authored
reported by smatch phy.c:854 rtw_phy_linear_2_db() error: buffer overflow 'db_invert_table[i]' 8 <= 8 (assuming for loop doesn't break) However, it seems to be a false alarm because we prevent it originally via if (linear >= db_invert_table[11][7]) return 96; /* maximum 96 dB */ Still, we adjust the code to be more readable and avoid smatch warning. Signed-off-by: -
Chih-Kang Chang authored
The original timing that store OP channel info is after associated. However, HW scan might happen before associated without backing to OP channel, that will cause authentication or association fail. Therefore, we modify the timing of storing OP channel info. Signed-off-by:
-
Chih-Kang Chang authored
HW scan need to start queues after switch to OP channel, and stop queues before leaving op channel. However, in original code, driver will start queues after switch to OP channel, but stop queues until switch to OP channel next time, that will cause packets transmitted in wrong channel. So we fix the stop queues timing. Signed-off-by:
-
Po-Hao Huang authored
Some WSC IEs require size larger than we current supports. Extend size to fit those demands. Separate the registered scan IE length by IC so settings can be independent. Since old firmware uses fewer page number, define a firmware feature to be compatible with various firmware version. Signed-off-by:
Po-Hao Huang <phhuang@realtek.com> Signed-off-by:
-
- 30 Jul, 2022 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2022-07-28 Misc updates to mlx5 driver: 1) Gal corrects to use skb_tcp_all_headers on encapsulated skbs. 2) Roi Adds the support for offloading standalone police actions. 3) lama, did some refactoring to minimize code coupling with mlx5e_priv "god object" in some of the follows, and converts some of the objects to pointers to preserve on memory when these objects aren't needed. This is part one of two parts series. * tag 'mlx5-updates-2022-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Move mlx5e_init_l2_addr to en_main net/mlx5e: Split en_fs ndo's and move to en_main net/mlx5e: Separate mlx5e_set_rx_mode_work and move caller to en_main net/mlx5e: Add mdev to flow_steering struct net/mlx5e: Report flow steering errors with mdev err report API net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer net/mlx5e: Allocate VLAN and TC for featured profiles only net/mlx5e: Make mlx5e_tc_table private net/mlx5e: Convert mlx5e_tc_table member of mlx5e_flow_steering to pointer net/mlx5e: TC, Support tc action api for police net/mlx5e: TC, Separate get/update/replace meter functions net/mlx5e: Add red and green counters for metering net/mlx5e: TC, Allocate post meter ft per rule net/mlx5: DR, Add support for flow metering ASO net/mlx5e: Fix wrong use of skb_tcp_all_headers() with encapsulation ==================== Link: https://lore.kernel.org/r/20220728205728.143074-1-saeed@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2022-07-28 This series contains updates to ice driver only. Michal allows for VF true promiscuous mode to be set for multiple VFs and adds clearing of promiscuous filters when VF trust is removed. Maciej refactors ice_set_features() to track/check changed features instead of constantly checking against netdev features and adds support for NETIF_F_LOOPBACK. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: allow toggling loopback mode via ndo_set_features callback ice: compress branches in ice_set_features() ice: Fix promiscuous mode not turning off ice: Introduce enabling promiscuous mode on multiple VF's ==================== Link: https://lore.kernel.org/r/20220728195538.3391360-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Edward Cree says: ==================== sfc: VF representors for EF100 - RX side This series adds the receive path for EF100 VF representors, plus other minor features such as statistics. ==================== Link: https://lore.kernel.org/r/cover.1659034549.git.ecree.xilinx@gmail.comSigned-off-by:
-
Edward Cree authored
It's not truly a ring, but the maximum length of the list of queued RX SKBs is analogous to an RX ring size, so use that API to configure it. Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
-
Edward Cree authored
Representors do not want to be subject to the PF's Ethernet address filters, since traffic from VFs will typically have a destination either elsewhere on the link segment or on an overlay network. So, create a dynamic m-port with promiscuous and all-multicast filters, and set it as the egress port of representor default rules. Since the m-port is an alias of the calling PF's own m-port, traffic will still be delivered to the PF's RXQs, but it will be subject to the VNRX filter rules installed on the dynamic m-port (specified by the v-port ID field of the filter spec). Signed-off-by:
-
Edward Cree authored
We need to be able to drop the efx->filter_sem in ef100_filter_table_up() so that we can call functions that insert filters (and thus take that rwsem for read), which means the efx->type->filter_table_probe method needs to be responsible for taking the lock in the first place. Signed-off-by:
-
Edward Cree authored
Default rules are low-priority switching rules which the hardware uses in the absence of higher-priority rules. Each representor requires a corresponding rule matching traffic from its representee VF and delivering to the PF (where a check on INGRESS_MPORT in __ef100_rx_packet() will direct it to the representor). No rule is required in the reverse direction, because representor TX uses a TX override descriptor to bypass the MAE and deliver directly to the VF. Since inserting any rule into the MAE disables the firmware's own default rules, also insert a pair of rules to connect the PF to the physical network port and vice-versa. Signed-off-by:
-
Edward Cree authored
If the source m-port of a packet in __ef100_rx_packet() is a VF, hand off the packet to the corresponding representor with efx_ef100_rep_rx_packet(). Signed-off-by:
-
Edward Cree authored
If not, for now drop them and warn. A subsequent patch will look up the source m-port to try and find a representor to deliver them to. Signed-off-by:
-
Edward Cree authored
Traffic delivered to the (MAE admin) PF could be from either the wire or a VF. The INGRESS_MPORT field of the RX prefix distinguishes these; base_mport is the value this field will have for traffic from the wire (which should be delivered to the PF's netdevice, not a representor). Signed-off-by:
-
Edward Cree authored
Representor RX uses a NAPI context driven by a 'fake interrupt': when the parent PF receives a packet destined for the representor, it adds it to an SKB list (efv->rx_list), and schedules NAPI if the 'fake interrupt' is primed. The NAPI poll then pulls packets off this list and feeds them to the stack with netif_receive_skb_list(). This scheme allows us to decouple representor RX from the parent PF's RX fast-path. This patch implements the 'top half', which builds an SKB, copies data into it from the RX buffer (which can then be released), adds it to the queue and fires the 'fake interrupt' if necessary. Signed-off-by:
-
Edward Cree authored
This patch adds the 'bottom half' napi->poll routine for representor RX. See the next patch (with the top half) for an explanation of the 'fake interrupt' scheme used to drive this NAPI context. Signed-off-by:
-
Edward Cree authored
Implement .ndo_get_stats64() method to read values out of struct efx_rep_sw_stats. Signed-off-by:
-
Dan Carpenter authored
The "ret" variable needs to be initialized at the start. Fixes: 52323ef7 ("net: marvell: prestera: add phylink support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YuKeBBuGtsmd7QdT@kiliSigned-off-by:
-
Yu Zhe authored
Use "jiffies != now" to replace "jiffies - now > 0" to make code more readable. We want to put a limit on how long the loop can run for before rescheduling. Signed-off-by:
Yu Zhe <yuzhe@nfschina.com> Link: https://lore.kernel.org/r/20220729061712.22666-1-yuzhe@nfschina.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v5.20 Fourth set of patches for v5.20, last few patches before the merge window. Only driver changes this time, mostly just fixes and cleanup. Major changes: brcmfmac - support brcm,ccode-map-trivial DT property wcn36xx - add debugfs file to show firmware feature strings * tag 'wireless-next-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (36 commits) wifi: rtw88: check the return value of alloc_workqueue() wifi: rtw89: 8852a: adjust IMR for SER L1 wifi: rtw89: 8852a: update RF radio A/B R56 wifi: wcn36xx: Add debugfs entry to read firmware feature strings wifi: wcn36xx: Move capability bitmap to string translation function to firmware.c wifi: wcn36xx: Move firmware feature bit storage to dedicated firmware.c file wifi: wcn36xx: Rename clunky firmware feature bit enum wifi: brcmfmac: prevent double-free on hardware-reset wifi: brcmfmac: support brcm,ccode-map-trivial DT property dt-bindings: bcm4329-fmac: add optional brcm,ccode-map-trivial wifi: brcmfmac: Replace default (not configured) MAC with a random MAC wifi: brcmfmac: Add brcmf_c_set_cur_etheraddr() helper wifi: brcmfmac: Remove #ifdef guards for PM related functions wifi: brcmfmac: use strreplace() in brcmf_of_probe() wifi: plfxlc: Use eth_zero_addr() to assign zero address wifi: wilc1000: use existing iftype variable to store the interface type wifi: wilc1000: add 'isinit' flag for SDIO bus similar to SPI wifi: wilc1000: cancel the connect operation during interface down wifi: wilc1000: get correct length of string WID from received config packet wifi: wilc1000: set station_info flag only when signal value is valid ... ==================== Link: https://lore.kernel.org/r/20220729192832.A5011C433D6@smtp.kernel.orgSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Andrii Nakryiko says: ==================== bpf-next 2022-07-29 We've added 22 non-merge commits during the last 4 day(s) which contain a total of 27 files changed, 763 insertions(+), 120 deletions(-). The main changes are: 1) Fixes to allow setting any source IP with bpf_skb_set_tunnel_key() helper, from Paul Chaignon. 2) Fix for bpf_xdp_pointer() helper when doing sanity checking, from Joanne Koong. 3) Fix for XDP frame length calculation, from Lorenzo Bianconi. 4) Libbpf BPF_KSYSCALL docs improvements and fixes to selftests to accommodate s390x quirks with socketcall(), from Ilya Leoshkevich. 5) Allow/denylist and CI configs additions to selftests/bpf to improve BPF CI, from Daniel Müller. 6) BPF trampoline + ftrace follow up fixes, from Song Liu and Xu Kuohai. 7) Fix allocation warnings in netdevsim, from Jakub Kicinski. 8) bpf_obj_get_opts() libbpf API allowing to provide file flags, from Joe Burton. 9) vsnprintf usage fix in bpf_snprintf_btf(), from Fedor Tokarev. 10) Various small fixes and clean ups, from Daniel Müller, Rongguang Wei, Jörn-Thorben Hinz, Yang Li. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (22 commits) bpf: Remove unneeded semicolon libbpf: Add bpf_obj_get_opts() netdevsim: Avoid allocation warnings triggered from user space bpf: Fix NULL pointer dereference when registering bpf trampoline bpf: Fix test_progs -j error with fentry/fexit tests selftests/bpf: Bump internal send_signal/send_signal_tracepoint timeout bpftool: Don't try to return value from void function in skeleton bpftool: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE macro bpf: btf: Fix vsnprintf return value check libbpf: Support PPC in arch_specific_syscall_pfx selftests/bpf: Adjust vmtest.sh to use local kernel configuration selftests/bpf: Copy over libbpf configs selftests/bpf: Sort configuration selftests/bpf: Attach to socketcall() in test_probe_user libbpf: Extend BPF_KSYSCALL documentation bpf, devmap: Compute proper xdp_frame len redirecting frames bpf: Fix bpf_xdp_pointer return pointer selftests/bpf: Don't assign outer source IP to host bpf: Set flow flag to allow any source IP in bpf_tunnel_key geneve: Use ip_tunnel_key flow flags in route lookups ... ==================== Link: https://lore.kernel.org/r/20220729230948.1313527-1-andrii@kernel.orgSigned-off-by:
-
- 29 Jul, 2022 4 commits
-
-
Yang Li authored
Eliminate the following coccicheck warning: /kernel/bpf/trampoline.c:101:2-3: Unneeded semicolon Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220725222733.55613-1-yang.lee@linux.alibaba.com
-
Joe Burton authored
Add an extensible variant of bpf_obj_get() capable of setting the `file_flags` parameter. This parameter is needed to enable unprivileged access to BPF maps. Without a method like this, users must manually make the syscall. Signed-off-by:
Joe Burton <jevburton@google.com> Signed-off-by:
-
Jakub Kicinski authored
We need to suppress warnings from sily map sizes. Also switch from GFP_USER to GFP_KERNEL_ACCOUNT, I'm pretty sure I misunderstood the flags when writing this code. Fixes: 395cacb5 ("netdevsim: bpf: support fake map offload") Reported-by: syzbot+ad24705d3fd6463b18c6@syzkaller.appspotmail.com Signed-off-by:
-
Xu Kuohai authored
A panic was reported on arm64: [ 44.517109] audit: type=1334 audit(1658859870.268:59): prog-id=19 op=LOAD [ 44.622031] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 [ 44.624321] Mem abort info: [ 44.625049] ESR = 0x0000000096000004 [ 44.625935] EC = 0x25: DABT (current EL), IL = 32 bits [ 44.627182] SET = 0, FnV = 0 [ 44.627930] EA = 0, S1PTW = 0 [ 44.628684] FSC = 0x04: level 0 translation fault [ 44.629788] Data abort info: [ 44.630474] ISV = 0, ISS = 0x00000004 [ 44.631362] CM = 0, WnR = 0 [ 44.632041] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000100ab5000 [ 44.633494] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 [ 44.635202] Internal error: Oops: 96000004 [#1] SMP [ 44.636452] Modules linked in: xfs crct10dif_ce ghash_ce virtio_blk virtio_console virtio_mmio qemu_fw_cfg [ 44.638713] CPU: 2 PID: 1 Comm: systemd Not tainted 5.19.0-rc7 #1 [ 44.640164] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 44.641799] pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 44.643404] pc : ftrace_set_filter_ip+0x24/0xa0 [ 44.644659] lr : bpf_trampoline_update.constprop.0+0x428/0x4a0 [ 44.646118] sp : ffff80000803b9f0 [ 44.646950] x29: ffff80000803b9f0 x28: ffff0b5d80364400 x27: ffff80000803bb48 [ 44.648721] x26: ffff8000085ad000 x25: ffff0b5d809d2400 x24: 0000000000000000 [ 44.650493] x23: 00000000ffffffed x22: ffff0b5dd7ea0900 x21: 0000000000000000 [ 44.652279] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff [ 44.654067] x17: 0000000000000000 x16: 0000000000000000 x15: ffffffffffffffff [ 44.655787] x14: ffff0b5d809d2498 x13: ffff0b5d809d2432 x12: 0000000005f5e100 [ 44.657535] x11: abcc77118461cefd x10: 000000000000005f x9 : ffffa7219cb5b190 [ 44.659254] x8 : ffffa7219c8e0000 x7 : 0000000000000000 x6 : ffffa7219db075e0 [ 44.661066] x5 : ffffa7219d3130e0 x4 : ffffa7219cab9da0 x3 : 0000000000000000 [ 44.662837] x2 : 0000000000000000 x1 : ffffa7219cb7a5c0 x0 : 0000000000000000 [ 44.664675] Call trace: [ 44.665274] ftrace_set_filter_ip+0x24/0xa0 [ 44.666327] bpf_trampoline_update.constprop.0+0x428/0x4a0 [ 44.667696] __bpf_trampoline_link_prog+0xcc/0x1c0 [ 44.668834] bpf_trampoline_link_prog+0x40/0x64 [ 44.669919] bpf_tracing_prog_attach+0x120/0x490 [ 44.671011] link_create+0xe0/0x2b0 [ 44.671869] __sys_bpf+0x484/0xd30 [ 44.672706] __arm64_sys_bpf+0x30/0x40 [ 44.673678] invoke_syscall+0x78/0x100 [ 44.674623] el0_svc_common.constprop.0+0x4c/0xf4 [ 44.675783] do_el0_svc+0x38/0x4c [ 44.676624] el0_svc+0x34/0x100 [ 44.677429] el0t_64_sync_handler+0x11c/0x150 [ 44.678532] el0t_64_sync+0x190/0x194 [ 44.679439] Code: 2a0203f4 f90013f5 2a0303f5 f9001fe1 (f9400800) [ 44.680959] ---[ end trace 0000000000000000 ]--- [ 44.682111] Kernel panic - not syncing: Oops: Fatal exception [ 44.683488] SMP: stopping secondary CPUs [ 44.684551] Kernel Offset: 0x2721948e0000 from 0xffff800008000000 [ 44.686095] PHYS_OFFSET: 0xfffff4a380000000 [ 44.687144] CPU features: 0x010,00022811,19001080 [ 44.688308] Memory Limit: none [ 44.689082] ---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- It's caused by a NULL tr->fops passed to ftrace_set_filter_ip(). tr->fops is initialized to NULL and is assigned to an allocated memory address if CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS is enabled. Since there is no direct call on arm64 yet, the config can't be enabled. To fix it, call ftrace_set_filter_ip() only if tr->fops is not NULL. Fixes: 00963a2e ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)") Reported-by:
Bruno Goncalves <bgoncalv@redhat.com> Signed-off-by:
Xu Kuohai <xukuohai@huawei.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20220728114048.3540461-1-xukuohai@huaweicloud.com
-
