[why]
DP2.1 specs has brought 3 new variants of sqaure patterns with different
pre-shoot and de-emphasis equalization requirements. The commit adds
logic to identify these variants and apply corresponding eqaulization
requirements into hardware lane settings.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
Subvp portion validation currently assumes that if vlevel provided does not
support pstate, then none will, and so subvp is not used.

[HOW]
After get vlevel, use lowest vlevel that supports pstate if it
exists, and use that for subvp validation.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
When we have a PSR display, we will not be requesting data from memory anymore.
So we report back true for no memory request case.

[How]
Check for PSR by checking PSR version in link settings
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Description]
- When merging a pipe that was previously pipe split, we need
  to also clear the link resources or the next stream/plane that
  uses the pipe may have an incorrect link resource state
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
Adding the new DPIA NOTIFY packets from DMUB
As per the design with Cruise to account for
250ms response delay otherwise

[HOW]
Added th DPIA NOTIFY logic as per DMUB logic
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
In case of failure to resume MST topology after suspend, an emtpty
mst tree prevents further mst hub detection on the same connector.
That causes the issue with MST hub hotplug after it's been unplug in
suspend.

[How]
Stop topology manager on the connector after detecting DM_MST failure.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
in dc_link_dp there still exist a few places where we call dio encoders
without checking current enabled encoder type.
The change is to make these places to call hwss equivalent functions so
it won't mistakenly program a wrong type encoder.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Workaround no longer needed.
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Fixing smatch error:
dm_resume() error: we previously assumed 'aconnector->dc_link' could be null

[How]
Check if dc_link null at the beginning of the loop,
so further checks can be dropped.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
It causes regression AMD source will not write DPCD 340.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Description]
- FW scheduling algorithm doesn't take into account of it's
  a center timing
- This affects where the subvp mclk switch can be scheduled
  (prevents HUBP vline interrupt from coming in if scheduled
  incorrectly)
- Block subvp center timing cases for now
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Description]
Modify soc BB to reduce expected sdp bandwidth and align with measurements to
fix underflow issues.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Description]
Add debug bit to disable unbounded requesting.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Iterating over every voltage state when we need to validate thousands of
configurations all at once (i.e. display hotplug) can take a significant
amount of time.

[How]
Check just the highest voltage state when fast_validate is true to
verify whether the configuration can work at all, then do a proper
validation including all voltage states later when fast_validate is false.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Fix problems when we disable secure_display.

[How]
- Reset secure display context after disabled
- A secure_display_context is dedicate to a crtc, so we set the crtc for
it when we create the context.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit c800d9ff.

[why]
revert for now because this change exposed other issue.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Current secure display only work with single display, now make it
work with multiple displays.

[How]
Create secure_display_context for each crtc instance to store its
own Region of Interest (ROI) information.

v2: squash in warning fix (Alex)
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update the reported maximum shader clock to the value which can
be guarded to be achieved on all cards. This is to align with
Window setting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

Correct the pstate standard/peak profiling mode clock settings
for SMU13.0.0.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

To better support UMD pstate profilings, the GPO feature needs
to be switched on/off accordingly.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

To better support UMD pstate profilings, the GPO feature needs
to be switched on/off accordingly.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

This reverts commit f9d00a4a.

This causes problem for KFD because when we overcommit we accidentially
bind the BO to GTT for moving it into VRAM. We also need to make sure
that this is done only as fallback after trying to evict first.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Remove the "domain" argument to amdgpu_bo_create_kernel_at() since this
function takes an "offset" argument which is the offset off of VRAM, and as
such allocation always takes place in VRAM. Thus, the "domain" argument is
unnecessary.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix amdgpu_bo_validate_size() to check whether the TTM domain manager for the
requested memory exists, else we get a kernel oops when dereferencing "man".

v2: Make the patch standalone, i.e. not dependent on local patches.
v3: Preserve old behaviour and just check that the manager pointer is not
    NULL.
v4: Complain if GTT domain requested and it is uninitialized--most likely a
    bug.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Always check if fru_addr is not NULL. This commit also fixes a "smatch"
warning.

v2: Add a Fixes tag.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Fixes: afbe5d1e ("drm/amdgpu: Bug-fix: Reading I2C FRU data on newer ASICs")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Instead of reserving a VMID for a single process allow that many
processes use the reserved ID. This allows for proper isolation
between the processes.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This is completely pointless since the VMID always stays allocated until
the VM is idle.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This should probably not access job->vm and also emit the SPM switch
under the conditional execute.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Bas pointed out that this isn't working as expected and could cause
crashes. Fix the handling by storing the marker that a switch is needed
inside the job instead.
Reported-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Without this, the pp_dpm_vclk and pp_dpm_dclk outputs are not with
correct data.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

Without this, the pp_dpm_vclk and pp_dpm_dclk outputs are not with
correct data.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

Add a per-process MMU notifier lock for processing notifiers from
userptrs. Use that lock to properly synchronize page table updates with
MMU notifiers.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Xiaogang Chen<Xiaogang.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add display SG support for DCN 3.1.4.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

When buffers are freed during suspend there is no guarantee that
they can be re-allocated during resume.

The PSP subsystem seems to be quite buggy regarding this, so add
a WARN_ON() to point out those bugs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexdeucher@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We not only need to make sure that we have a BO, but also that the BO
has some backing store.

Fixes: d1a372af ("drm/amdgpu: Set MTYPE in PTE based on BO flags")
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- evict_resource is taking too long causing sriov full access mode timeout.
  So, add an extra evict_resource in the beginning as an early evict.
Signed-off-by: Shikang Fan <shikang.fan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some special polaris 10 chips overlap with the polaris11
DID range.  Handle this properly in the driver.

v2: use local flags for other function calls.
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Only apply the static threshold for Stoney and Carrizo.
This hardware has certain requirements that don't allow
mixing of GTT and VRAM.  Newer asics do not have these
requirements so we should be able to be more flexible
with where buffers end up.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2270
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2291
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2255Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

There is a spelling mistake in the struct field dram_clk_chanage. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amd-drm-next-6.2-2022-12-07:

amdgpu:
- DSC fixes for DCN 2.1
- HDMI PCON fixes
- PSR fixes
- DC DML fixes
- Properly throttle on BO allocation
- GFX 11.0.4 fixes
- MMHUB fix
- Make some functions static
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221207232439.5908-1-alexander.deucher@amd.com