- 09 Oct, 2015 11 commits
-
-
Yaowei Bai authored
This patch makes ieee80211_is_* return bool to improve readability due to these particular functions only using either one or zero as their return value. No functional change. Signed-off-by:
Yaowei Bai <bywxiaobai@163.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yaowei Bai authored
This patch makes lockdep_genl_is_held return bool to improve readability due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ============================== Mellanox driver update for net-next Some small fixes and small enhancements from the team. Series applies over net-next commit acb4a6bf "tcp: ensure prior synack rtx behavior with small backlogs". ============================== Signed-off-by:
-
Saeed Mahameed authored
The 'for' loop when undoing rb-tree insertions and list-adds in the error flow in add_res_range had errors, fix them. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
The procedure mlx4_update_qp leaks mailboxes in its error-flow, fix that. Signed-off-by:
-
Ido Shamay authored
Changed the receive control flow in a way that steering rules are added only when the RSS object is already in RTR/RTS mode. Some optimization features, which are enabled by the device firmware, require this condition in order to be effective. Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
-
Eli Cohen authored
Use a single threaded work queue for each device in the system instead of using one thread for any device. This is required so we can concurrently process system error handling for all the devices that need that. Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Eli Cohen authored
Use ioread function to read health buffer data. In addition, print the firmware version as a string for readability and also use dev_err to have the device string to be printed. Signed-off-by:
-
Eli Cohen authored
In preparation to handling system errors at the mlx5_core level, change the interface of cmd_work_handler to accept a 64 bit argument for the vector. This allows to encode a flag that signifies when the handler is called as a result of a driver logic that wishes to terminate commands that the hardware may not be able to terminate. Such command completions are detected at the handler and proper return status is encoded. To be able to terminate page handler commands, we make sure to set the corresponding bit in the bitmask. Signed-off-by:
-
Eli Cohen authored
Improve the messages printed by the mlx5 macros to include the device string. In addition, prefix names used by the macros with two underscores to avoid possible name collisions. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-10-08 This series contains updates to i40e and i40evf only (again). Jesse fixes an issue where the driver was issuing a WARN_ON during ring size changes because the code was cloning the rx_ring struct but not zeroing out the pointers before allocating new memory, so simply zero out the pointers. Also reduced the function call overhead by moving the interrupt enable function by moving it to the header file, which it in turn allows us to inline it. Also does a thorough job of code cleanup to fix spaces after declarations, remove unnecessary braces and breaks, remove another __func__ use and general code tidiness. Mitch adds mover verbose error messages when the number of supported VFs is reported in driver init and it different from the number reported in config space. Updated the VF driver to now detect a reset with the VF_ARQLEN register since the enable bit is cleared when the VF is reset and it stays cleared until the VF driver processes the reset and re-enables the admin queue which is more reliable than using the VFGEN_RSTAT as previously. Neerav adds parsing for CEE DCBx TLVs from the LLDP MIB since there is a need to get the CEE DesiredCfg Tx by firmware and DCB configuration Rx from peer for debug and other application purposes. Carolyn fixes a problem where the PF's Flow Director filter table would have an entry that the hardware was unable to add, when this occurs an invalid entry gets replayed and a valid one is lost. Matt fixes an issue where multiple link up messages can be logged resulting from admin queue link status timing when link properties are changed. Shannon adds the ability to control the period link polling through ethtool to be able to switch it off and on for debugging link issues. Serey explicitly assigns the enum index for each VSI type so that the PF and VF always reference to the same VSI type event if the enum lists are different. ==================== Signed-off-by:
-
- 08 Oct, 2015 29 commits
-
-
Jesse Brandeburg authored
To help users and developers know what compile options and hardware features are enabled at compile time, print VxLAN is available. Change-ID: I3162f3b7678dc725a597f964217920eb218b480b Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
The VF really doesn't care about the QOS handle but it will in the future. Since the VF only uses TC0, send it that handle. On the VF side, save the handle and use it to populate the QOS params when we call into the client interface. Change-ID: I76f41b070baeaa09b19383e9168bc677837e0761 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Mitch Williams authored
Use the capabilities passed to us by the PF driver to control VF driver behavior. In the process, clean up the VLAN add/remove code so it's not a horrible morass of ifdefs. Change-ID: I1050eaf12b658a26fea6813047c9964163c70a73 Signed-off-by:
-
Jesse Brandeburg authored
I found a code indent that was avoidable because a whole function is inside an if block, reverse the if and move the code back a tab. Change-ID: I9989c8750ee61678fbf96a3b0fd7bf7cc7ef300a Signed-off-by:
-
Jesse Brandeburg authored
Add missings spaces after declarations, remove another __func__ use, remove uncessary braces, remove unneeded breaks, and useless returns, and generally fix up some code. Change-ID: Ie715d6b64976c50e1c21531685fe0a2bd38c4244 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Mitch Williams authored
Using VFGEN_RSTAT to detect a VF reset is an endeavor that is fraught with peril. It's entirely too easy to miss a reset because none of the bits are sticky. By the time the VF driver reads the register, the reset may have been processed and cleaned up by the PF driver, leaving the register in the same state that it was before the reset. Instead, detect a reset with the VF_ARQLEN register. When the VF is reset, the enable bit in this register is cleared, and it stays cleared until the VF driver processes the reset and re-enables the admin queue. Because we now deal with multiple registers in the reset and watchdog tasks, rename the rstat_val variable to reg_val. Change-ID: Id1df17045c0992e607da0162d31807f7fc20d199 Signed-off-by:
-
Greg Bowers authored
Changes parsing of AQ command Get CEE DCBX OPER CFG (0x0A07). Change is required because FW creates the oper_prio_tc nibbles reversed from those in the CEE Priority Group sub-TLV. Change-ID: I7d9d8641bb430d30e286fc3fac909866ef8a0de8 Signed-off-by:
Greg Bowers <gregory.j.bowers@intel.com> Tested-by:
-
Serey Kong authored
Ran into an issue where PF's VSI type list was different from VF's, which was resulted in different enum index. The VSI type list can be different depending on what build flag is used for PF and VF. The change is to explicitly assign enum index for each VSI type so that PF and VF always reference to the same VSI type event if the enum lists are different. Change-ID: I8c0e5fdb515f324f7964df863a458073cf467e57 Signed-off-by:
Serey Kong <serey.kong@intel.com> Tested-by:
-
Shannon Nelson authored
There's been some need for controlling the periodic link polling for debugging link issues. This patch enables switching it off and on through an ethtool private flag. The link poll remains on by default, but can be turned off with ethtool --set-priv-flags p261p1 LinkPolling off and later turned back on with ethtool --set-priv-flags p261p1 LinkPolling on To check the current status, use ethtool --show-priv-flags p261p1 Change-ID: I32e4ab654ff3eec90a06cf144899971b82d71c40 Signed-off-by:
-
Matt Jared authored
This patch addresses an issue where multiple link up messages can be logged resulting from aq link status timing when link properties are changed (fc, speed, etc.); solved by using a single function to handle status printing and adding a mechanism to track whether link state (up or down) has actually changed. Change-ID: Ied6ed6e49dc397c77d992adc0bc9ed3767152b9d Signed-off-by:
Matt Jared <matthew.a.jared@intel.com> Tested-by:
-
Carolyn Wyborny authored
This patch fixes a problem where the PF's fdir filter table would have an entry that the hw was unable to add. This notification happens in the hot path, so instead of trying to fix it then, we note the location in the failure case and delete it during regular fdir subtask callback. Without this patch, a case can occur where an invalid entry gets replayed and a valid one is not. Change-ID: I67831c183b5d0309876de807cc434809b74c9cb7 Signed-off-by:
Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by:
-
Neerav Parikh authored
This patch adds capability to query and store the CEE DCBX DesiredCfg and RemoteCfg data from the LLDP MIB. Added new member "desired_dcbx_config" in the i40e_hw data structure to hold CEE only DesiredCfg data. Change-ID: I19c550369594384eaff4cc63e690ca740231195d Signed-off-by:
Neerav Parikh <neerav.parikh@intel.com> Tested-by:
-
Neerav Parikh authored
This patch adds parsing for CEE DCBX TLVs from the LLDP MIB. While the driver gets the DCB CEE operational configuration from Firmware using the "Get CEE DCBX Oper Config" AQ command there is a need to get the CEE DesiredCfg Tx by firmware and DCB configuration Rx from peer; for debug and other application purposes. Change-ID: I9140edf1a25a2852c7eff805d81e5eff6266178d Signed-off-by:
-
Mitch Williams authored
Under certain circumstances, the device may not have enough resources to enable all of the VFs that it advertises in config space. Although the number of supported VFs is reported upon driver init, it is not obvious when this is different from the number reported in config space. To eliminate this confusion, add an error message explaining the problem. Additionally, move the 'Allocating VFs' message down below the error checks so as to prevent further confusion. Change-ID: I45b7efca53a7aebf7777be33a8bc9d615ae48ea1 Signed-off-by:
-
Jesse Brandeburg authored
The interrupt enable function can be inlined by moving it to the header file, which decreases the function call overhead for a frequently called function. Change-ID: I3214cc99593725768642680e7b8ce7e9bba7e44d Signed-off-by:
-
Jesse Brandeburg authored
The driver was issuing a WARN_ON during ring size changes because the code was cloning the rx_ring struct but not zeroing out the pointers before allocating new memory. Zero out the pointers in the cloned copy before allocating new memory for them. In this case the code was correctly avoiding memory leaks but still triggering the warning. Change-ID: I186dd493948e9b7254ab0593d4aad8b68808918d Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF/random32 updates BPF update to split the prandom state apart, and to move the *once helpers to the core. For details, please see individual patches. Given the changes and since it's in the tree for quite some time, net-next is a better choice in our opinion. v1 -> v2: - Make DO_ONCE() type-safe, remove the kvec helper. Credits go to Alexei Starovoitov for the __VA_ARGS__ hint, thanks! - Add a comment to the DO_ONCE() helper as suggested by Alexei. - Rework prandom_init_once() helper to the new API. - Keep Alexei's Acked-by on the last patch. ==================== Signed-off-by: -
Daniel Borkmann authored
While recently arguing on a seccomp discussion that raw prandom_u32() access shouldn't be exposed to unpriviledged user space, I forgot the fact that SKF_AD_RANDOM extension actually already does it for some time in cBPF via commit 4cd3675e ("filter: added BPF random opcode"). Since prandom_u32() is being used in a lot of critical networking code, lets be more conservative and split their states. Furthermore, consolidate eBPF and cBPF prandom handlers to use the new internal PRNG. For eBPF, bpf_get_prandom_u32() was only accessible for priviledged users, but should that change one day, we also don't want to leak raw sequences through things like eBPF maps. One thought was also to have own per bpf_prog states, but due to ABI reasons this is not easily possible, i.e. the program code currently cannot access bpf_prog itself, and copying the rnd_state to/from the stack scratch space whenever a program uses the prng seems not really worth the trouble and seems too hacky. If needed, taus113 could in such cases be implemented within eBPF using a map entry to keep the state space, or get_random_bytes() could become a second helper in cases where performance would not be critical. Both sides can trigger a one-time late init via prandom_init_once() on the shared state. Performance-wise, there should even be a tiny gain as bpf_user_rnd_u32() saves one function call. The PRNG needs to live inside the BPF core since kernels could have a NET-less config as well. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Cc: Chema Gonzalez <chema@google.com> Signed-off-by:
-
Daniel Borkmann authored
Add a prandom_init_once() facility that works on the rnd_state, so that users that are keeping their own state independent from prandom_u32() can initialize their taus113 per cpu states. The motivation here is similar to net_get_random_once(): initialize the state as late as possible in the hope that enough entropy has been collected for the seeding. prandom_init_once() makes use of the recently introduced prandom_seed_full_state() helper and is generic enough so that it could also be used on fast-paths due to the DO_ONCE(). Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
Factor out the full reseed handling code that populates the state through get_random_bytes() and runs prandom_warmup(). The resulting prandom_seed_full_state() will be used later on in more than the current __prandom_reseed() user. Fix also two minor whitespace issues along the way. Signed-off-by:
-
Hannes Frederic Sowa authored
Make the get_random_once() helper generic enough, so that functions in general would only be called once, where one user of this is then net_get_random_once(). The only implementation specific call is to get_random_bytes(), all the rest of this *_once() facility would be duplicated among different subsystems otherwise. The new DO_ONCE() helper will be used by prandom() later on, but might also be useful for other scenarios/subsystems as well where a one-time initialization in often-called, possibly fast path code could occur. Signed-off-by:
-
Hannes Frederic Sowa authored
There's no good reason why users outside of networking should not be using this facility, f.e. for initializing their seeds. Therefore, make it accessible from there as get_random_once(). Signed-off-by:
-
David Ahern authored
Commit deaa0a6a ("net: Lookup actual route when oif is VRF device") exposed a bug in __ip_route_output_key_hash for VRF devices: on FIB lookup failure if the oif is specified the current logic drops to make_route on the assumption that the route tables are wrong. For VRF/L3 master devices this leads to wrong dst entries and route lookups. For example: $ ip route ls table vrf-red unreachable default broadcast 10.2.1.0 dev eth1 proto kernel scope link src 10.2.1.2 10.2.1.0/24 dev eth1 proto kernel scope link src 10.2.1.2 local 10.2.1.2 dev eth1 proto kernel scope host src 10.2.1.2 broadcast 10.2.1.255 dev eth1 proto kernel scope link src 10.2.1.2 $ ip route get oif vrf-red 1.1.1.1 1.1.1.1 dev vrf-red src 10.0.0.2 cache With this patch: $ ip route get oif vrf-red 1.1.1.1 RTNETLINK answers: No route to host which is the correct response based on the default route Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Daniel Borkmann authored
Similar to commit c29390c6 ("xps: must clear sender_cpu before forwarding"), we also need to clear the skb->sender_cpu when moving from RX to TX via skb_do_redirect() due to the shared location of napi_id (used on RX) and sender_cpu (used on TX). Fixes: 27b29f63 ("bpf: add bpf_redirect() helper") Signed-off-by:
-
Arnd Bergmann authored
The recently added hns driver causes a build warning in ARM allmodconfig builds: drivers/net/ethernet/hisilicon/hns/hnae.c: In function 'handles_show': drivers/net/ethernet/hisilicon/hns/hnae.c:452:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] j, (u64)h->qs[i]->io_base); ^ This removes the pointless cast and prints the pointer address using the "%p" format string in all three locations. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jon Ringle authored
This ethernet driver supports the Micorchip enc424j600/626j600 Ethernet controller over a SPI bus interface. This driver makes use of the regmap API to optimize access to registers by caching registers where possible. Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/39935b.pdfSigned-off-by:
Jon Ringle <jringle@gridpoint.com> Signed-off-by:
-
David S. Miller authored
Arun Parameswaran says: ==================== Add support for Broadcom's iProc MDIO and Cygnus Ethernet PHY This patchset adds support for the iProc MDIO interface and the Broadcom Cygnus SoC's internal Ethernet PHY. The internal Ethernet PHY(s) in the Cygnus SoC's are accessed via the MDIO interface found in most of the iProc based chips. The patch also consolidates the common API's used by the Broadcom phys to a common library. Existing Broadcom phy drivers have been modified to use the common library API's. This patch series is based on Linux v4.3-rc1 and is avaliable in: https://github.com/Broadcom/cygnus-linux/tree/cygnus-net-phy-mdio-v3 The Ethernet driver for the iProc family will be submitted soon, as will the device tree configurations for the different iProc family SoCs. Changes from v2: - Modified drivers/net/phy/Kconfig to modify the BCM_CYGNUS_PHY driver to 'depends on MDIO_BCM_IPROC' instead of 'select'. - Added github branch to the cover letter Changes from v1: - Updated device tree documentation for the iProc MDIO driver based on Florian's feedback. - Moved the core register defines from the Cygnus PHY driver to 'include/linux/brcmphy.h' based on Florian's feedback. - Created a new patch/commit to modify the bcm7xxx phy driver to use the new core register defines. - Modified the Kconfig entry for the Broadcom PHY library to 'tristate' instead of 'bool' ==================== Signed-off-by:
-
Arun Parameswaran authored
Modified the bcm7xxx phy driver to remove local core register defines and use the common ones from "include/linux/brcmphy.h" Signed-off-by:
Arun Parameswaran <arunp@broadcom.com> Signed-off-by:
-
Arun Parameswaran authored
Add support for the Broadcom Cygnus SoCs internal PHY's. The PHYs are 1000M/100M/10M capable with support for 'EEE' and 'APD' (Auto Power Down). This driver supports the following Broadcom Cygnus SoCs: - BCM583XX (BCM58300, BCM58302, BCM58303, BCM58305) - BCM113XX (BCM11300, BCM11320, BCM11350, BCM11360) The PHY's on these SoC's require some workarounds for stable operation, both during configuration time and during suspend/resume. This driver handles the application of the workarounds. Signed-off-by:
-
