- 21 Nov, 2018 40 commits
-
-
Amir Goldstein authored
commit babf4770 upstream. We hit a BUG on kfree of an ERR_PTR()... Reported-by: syzbot+ff03fe05c717b82502d0@syzkaller.appspotmail.com Fixes: 8b88a2e6 ("ovl: verify upper root dir matches lower root dir") Cc: <stable@vger.kernel.org> # v4.13 Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Young_X authored
commit e4f3aa2e upstream. There is another cast from unsigned long to int which causes a bounds check to fail with specially crafted input. The value is then used as an index in the slot array in cdrom_slot_status(). This issue is similar to CVE-2018-16658 and CVE-2018-10940. Signed-off-by:
Young_X <YangX92@hotmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Hugues Fruchet authored
[ Upstream commit 985cdcb0 ] Mode setting depends on last mode set, in particular because of exposure calculation when downscale mode change between subsampling and scaling. At stream on the last mode was wrongly set to current mode, so no change was detected and exposure calculation was not made, fix this. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Reviewed-by:
Jacopo Mondi <jacopo@jmondi.org> Tested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit ff30e9e8 ] We accidentally left out the size of the amdgpu_bo_list struct. It could lead to memory corruption on 32 bit systems. You'd have to pick the absolute maximum and set "num_entries == 59652323" then size would wrap to 16 bytes. Fixes: 920990cb ("drm/amdgpu: allocate the bo_list array after the list") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
Bas Nieuwenhuizen <basni@chromium.org> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Dominique Martinet authored
[ Upstream commit 62e39417 ] p9stat_free is more of a cleanup function than a 'free' function as it only frees the content of the struct; there are chances of use-after-free if it is improperly used (e.g. p9stat_free called twice as it used to be possible to) Clearing dangling pointers makes the function idempotent and safer to use. Link: http://lkml.kernel.org/r/1535410108-20650-2-git-send-email-asmadeus@codewreck.orgSigned-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Reported-by: syzbot+d4252148d198410b864f@syzkaller.appspotmail.com Signed-off-by:
-
Hugues Fruchet authored
[ Upstream commit fb98e29f ] fixes: 6949d864 ("media: ov5640: do not change mode if format or frame interval is unchanged"). Symptom was fuzzy image because of JPEG default format not being changed according to new format selected, fix this. Init sequence initialises format to YUV422 UYVY but sensor->fmt initial value was set to JPEG, fix this. Signed-off-by:
-
Sébastien Szymanski authored
[ Upstream commit 31edaa6e ] Signals available on both i.MX6UL and i.MX6ULL should have the same name because it is the case of all others common signals, it avoids to make mistakes (use the wrong ones) and it makes writing device tree files less complicated. For example: imx6ul-imx6ull-board.dtsi: ... pinctrl_uart5: uart5grp { fsl,pins = < MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 >; }; imx6ul-board.dts: #include <imx6ul.dtsi> #include <imx6ul-imx6ull-board.dtsi> ... imx6ull-board.dts: #include <imx6ull.dtsi> #include <imx6ul-imx6ull-board.dtsi> ... Without this patch, the imx6ull-board.dtb will use MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX instead of MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX and the uart5 will be misconfigured. Signed-off-by:
Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Jan Kara authored
[ Upstream commit a9ad01bc ] There are certain filesystem features which we support for reading but not for writing. We properly refuse to mount such filesystems read-write however for some features (such as read-only partitions), we don't check for these features when remounting the filesystem from read-only to read-write. Thus such filesystems could be remounted read-write leading to strange behavior (most likely crashes). Fix the problem by marking in superblock whether the filesystem has some features that are supported in read-only mode and check this flag during remount. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Dominique Martinet authored
[ Upstream commit b4dc44b3 ] the 9p client code overwrites our glock.client_id pointing to a static buffer by an allocated string holding the network provided value which we do not care about; free and reset the value as appropriate. This is almost identical to the leak in v9fs_file_getlock() fixed by Al Viro in commit ce85dd58 ("9p: we are leaking glock.client_id in v9fs_file_getlock()"), which was returned as an error by a coverity false positive -- while we are here attempt to make the code slightly more robust to future change of the net/9p/client code and hopefully more clear to coverity that there is no problem. Link: http://lkml.kernel.org/r/1536339057-21974-5-git-send-email-asmadeus@codewreck.orgSigned-off-by:
-
Colin Ian King authored
[ Upstream commit 1f447e51 ] Currently we have structrues comp (which is empty) and comp_info being used to register and deregister the component. This mismatch in naming occurred from a previous commit that renamed aim_info to comp. Fix this to use consistent component naming in line with most/net, most/sound etc. This fixes the message two issues, one with a null empty name when loading the module: [ 1485.269515] most_core: registered new core component (null) and an Oops when removing the module: [ 1485.277971] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 1485.278648] PGD 0 P4D 0 [ 1485.279253] Oops: 0002 [#2] SMP PTI [ 1485.279847] CPU: 1 PID: 32629 Comm: modprobe Tainted: P D WC OE 4.18.0-8-generic #9 [ 1485.280442] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 1485.281040] RIP: 0010:most_deregister_component+0x3c/0x70 [most_core] .. etc Fixes: 1b10a031 ("staging: most: video: remove aim designators") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Andrey Grodzovsky authored
[ Upstream commit d8de8260 ] After GPU reset amdgpu_vm_clear_bo triggers VM flush but job->vm_pd_addr is not set causing SDMA TO. v2: Per advise by Christian König avoid flushing VM for jobs where job->vm_pd_addr wasn't explicitly set. v3: Shortcut vm_flush_needed early. Fixes cbd52851 drm/amdgpu: move setting the GART addr into TTM. Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Kieran Bingham authored
[ Upstream commit 2a3181d9 ] The R-Car Gen3 DU utilises the VSP1 hardware for memory access. The limits on the RPF and WPF in this pipeline are 8190x8190. Update the supported maximum sizes accordingly. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Alexandru Ardelean authored
[ Upstream commit 4ee03330 ] Fixes commit 17be2a29 ("staging: iio: ad7606: replace range/range_available with corresponding scale"). The AD7606 devices don't have a 2.5V voltage range, they have 5V & 10V voltage range, which is selectable via the `gpio_range` descriptor. The scales also seem to have been miscomputed, because when they were applied to the raw values, the results differ from the expected values. After checking the ADC transfer function in the datasheet, these were re-computed. Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Breno Leitao authored
[ Upstream commit 693b31b2 ] Test tm-tmspr might exit before all threads stop executing, because it just waits for the very last thread to join before proceeding/exiting. This patch makes sure that all threads that were created will join before proceeding/exiting. This patch also guarantees that the amount of threads being created is equal to thread_num. Signed-off-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Marco Felsch authored
[ Upstream commit bd24db04 ] The driver ignored the width alignment which exists due to the UYVY colorspace format. Fix the width alignment and make use of the the provided v4l2 helper function to set the width, height and all alignments in one. Fixes: 963ddc63 ("[media] media: tvp5150: Add cropping support") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
Phil Elwell authored
[ Upstream commit 83444987 ] The SC16IS752 is a dual-channel device. The two channels are largely independent, but the IRQ signals are wired together as an open-drain, active low signal which will be driven low while either of the channels requires attention, which can be for significant periods of time until operations complete and the interrupt can be acknowledged. In that respect it is should be treated as a true level-sensitive IRQ. The kernel, however, needs to be able to exit interrupt context in order to use I2C or SPI to access the device registers (which may involve sleeping). Therefore the interrupt needs to be masked out or paused in some way. The usual way to manage sleeping from within an interrupt handler is to use a threaded interrupt handler - a regular interrupt routine does the minimum amount of work needed to triage the interrupt before waking the interrupt service thread. If the threaded IRQ is marked as IRQF_ONESHOT the kernel will automatically mask out the interrupt until the thread runs to completion. The sc16is7xx driver used to use a threaded IRQ, but a patch switched to using a kthread_worker in order to set realtime priorities on the handler thread and for other optimisations. The end result is non-threaded IRQ that schedules some work then returns IRQ_HANDLED, making the kernel think that all IRQ processing has completed. The work-around to prevent a constant stream of interrupts is to mark the interrupt as edge-sensitive rather than level-sensitive, but interpreting an active-low source as a falling-edge source requires care to prevent a total cessation of interrupts. Whereas an edge-triggering source will generate a new edge for every interrupt condition a level-triggering source will keep the signal at the interrupting level until it no longer requires attention; in other words, the host won't see another edge until all interrupt conditions are cleared. It is therefore vital that the interrupt handler does not exit with an outstanding interrupt condition, otherwise the kernel will not receive another interrupt unless some other operation causes the interrupt state on the device to be cleared. The existing sc16is7xx driver has a very simple interrupt "thread" (kthread_work job) that processes interrupts on each channel in turn until there are no more. If both channels are active and the first channel starts interrupting while the handler for the second channel is running then it will not be detected and an IRQ stall ensues. This could be handled easily if there was a shared IRQ status register, or a convenient way to determine if the IRQ had been deasserted for any length of time, but both appear to be lacking. Avoid this problem (or at least make it much less likely to happen) by reducing the granularity of per-channel interrupt processing to one condition per iteration, only exiting the overall loop when both channels are no longer interrupting. Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Signed-off-by:
-
John Garry authored
[ Upstream commit a27d9382 ] In commit c58caaab ("serial: 8250: of: Defer probe on missing IRQ"), a check was added for the UART driver being probed prior to the parent IRQ controller. Unfortunately this breaks certain boards which have no interrupt support, like Huawei D03. Indeed, the 8250 DT bindings state that interrupts should be supported - not must. To fix, switch from irq_of_parse_and_map() to of_irq_get(), which does relay whether the IRQ host controller domain is not ready, i.e. defer probe, instead of assuming it. Fixes: c58caaab ("serial: 8250: of: Defer probe on missing IRQ") Signed-off-by:
John Garry <john.garry@huawei.com> Reviewed-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by:
-
Gao Xiang authored
[ Upstream commit 37ec35a6 ] This patch fixes a missing endian conversion in vle_get_logical_extent_head. Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
-
Huacai Chen authored
[ Upstream commit 2794f688 ] Call pcie_bus_configure_settings() on MIPS, like for other platforms. The function pcie_bus_configure_settings() makes sure the MPS (Max Payload Size) across the bus is uniform and provides the ability to tune the MRSS (Max Read Request Size) and MPS (Max Payload Size) to higher performance values. Some devices will not operate properly if these aren't set correctly because the firmware doesn't always do it. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20649/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhuacai@gmail.com> Signed-off-by:
-
Rashmica Gupta authored
[ Upstream commit 3f7daf3d ] When hot-removing memory release_mem_region_adjustable() splits iomem resources if they are not the exact size of the memory being hot-deleted. Adding this memory back to the kernel adds a new resource. Eg a node has memory 0x0 - 0xfffffffff. Hot-removing 1GB from 0xf40000000 results in the single resource 0x0-0xfffffffff being split into two resources: 0x0-0xf3fffffff and 0xf80000000-0xfffffffff. When we hot-add the memory back we now have three resources: 0x0-0xf3fffffff, 0xf40000000-0xf7fffffff, and 0xf80000000-0xfffffffff. This is an issue if we try to remove some memory that overlaps resources. Eg when trying to remove 2GB at address 0xf40000000, release_mem_region_adjustable() fails as it expects the chunk of memory to be within the boundaries of a single resource. We then get the warning: "Unable to release resource" and attempting to use memtrace again gives us this error: "bash: echo: write error: Resource temporarily unavailable" This patch makes memtrace remove memory in chunks that are always the same size from an address that is always equal to end_of_memory - n*size, for some n. So hotremoving and hotadding memory of different sizes will now not attempt to remove memory that spans multiple resources. Signed-off-by:
Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by:
-
Joel Stanley authored
[ Upstream commit ee9d21b3 ] When building with clang crt0's _zimage_start is not marked weak, which breaks the build when linking the kernel image: $ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$ 0000000000000058 g .text 0000000000000000 _zimage_start ld: arch/powerpc/boot/wrapper.a(crt0.o): in function '_zimage_start': (.text+0x58): multiple definition of '_zimage_start'; arch/powerpc/boot/pseries-head.o:(.text+0x0): first defined here Clang requires the .weak directive to appear after the symbol is declared. The binutils manual says: This directive sets the weak attribute on the comma separated list of symbol names. If the symbols do not already exist, they will be created. So it appears this is different with clang. The only reference I could see for this was an OpenBSD mailing list post[1]. Changing it to be after the declaration fixes building with Clang, and still works with GCC. $ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$ 0000000000000058 w .text 0000000000000000 _zimage_start Reported to clang as https://bugs.llvm.org/show_bug.cgi?id=38921 [1] https://groups.google.com/forum/#!topic/fa.openbsd.tech/PAgKKen2YCYSigned-off-by:
Joel Stanley <joel@jms.id.au> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Dengcheng Zhu authored
[ Upstream commit dc57aaf9 ] After changing CPU online status, it will not be sent any IPIs such as in __flush_cache_all() on software coherency systems. Do this before disabling local IRQ. Signed-off-by:
Dengcheng Zhu <dzhu@wavecomp.com> Signed-off-by:
-
Lucas Stach authored
[ Upstream commit 1f32061e ] On a decoder instance, after the profile has been parsed from the stream __v4l2_ctrl_s_ctrl() is called to notify userspace about changes in the read-only profile control. This ends up calling back into the CODA driver where a missing check on the s_ctrl caused the profile information that has just been parsed from the stream to be overwritten with the default baseline profile. Later on the driver fails to enable frame reordering, based on the wrong profile information. Fixes: 347de126d1da (media: coda: add read-only h.264 decoder profile/level controls) Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Nicholas Mc Guire authored
[ Upstream commit c5d59528 ] altera_hw_filt_init() which calls append_internal() assumes that the node was successfully linked in while in fact it can silently fail. So the call-site needs to set return to -ENOMEM on append_internal() returning NULL and exit through the err path. Fixes: 349bcf02 ("[media] Altera FPGA based CI driver module") Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
-
John Garry authored
[ Upstream commit 331d880b ] In hibmc_drm_fb_create(), when the call to hibmc_framebuffer_init() fails with error, do not store the error code in the HiBMC device frame-buffer pointer, as this will be later checked for non-zero value in hibmc_fbdev_destroy() when our intention is to check for a valid function pointer. This fixes the following crash: [ 9.699791] Unable to handle kernel NULL pointer dereference at virtual address 000000000000001a [ 9.708672] Mem abort info: [ 9.711489] ESR = 0x96000004 [ 9.714570] Exception class = DABT (current EL), IL = 32 bits [ 9.720551] SET = 0, FnV = 0 [ 9.723631] EA = 0, S1PTW = 0 [ 9.726799] Data abort info: [ 9.729702] ISV = 0, ISS = 0x00000004 [ 9.733573] CM = 0, WnR = 0 [ 9.736566] [000000000000001a] user address but active_mm is swapper [ 9.742987] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 9.748614] Modules linked in: [ 9.751694] CPU: 16 PID: 293 Comm: kworker/16:1 Tainted: G W 4.19.0-rc4-next-20180920-00001-g9b0012c #322 [ 9.762681] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018 [ 9.771915] Workqueue: events work_for_cpu_fn [ 9.776312] pstate: 60000005 (nZCv daif -PAN -UAO) [ 9.781150] pc : drm_mode_object_put+0x0/0x20 [ 9.785547] lr : hibmc_fbdev_fini+0x40/0x58 [ 9.789767] sp : ffff00000af1bcf0 [ 9.793108] x29: ffff00000af1bcf0 x28: 0000000000000000 [ 9.798473] x27: 0000000000000000 x26: ffff000008f66630 [ 9.803838] x25: 0000000000000000 x24: ffff0000095abb98 [ 9.809203] x23: ffff8017db92fe00 x22: ffff8017d2b13000 [ 9.814568] x21: ffffffffffffffea x20: ffff8017d2f80018 [ 9.819933] x19: ffff8017d28a0018 x18: ffffffffffffffff [ 9.825297] x17: 0000000000000000 x16: 0000000000000000 [ 9.830662] x15: ffff0000092296c8 x14: ffff00008939970f [ 9.836026] x13: ffff00000939971d x12: ffff000009229940 [ 9.841391] x11: ffff0000085f8fc0 x10: ffff00000af1b9a0 [ 9.846756] x9 : 000000000000000d x8 : 6620657a696c6169 [ 9.852121] x7 : ffff8017d3340580 x6 : ffff8017d4168000 [ 9.857486] x5 : 0000000000000000 x4 : ffff8017db92fb20 [ 9.862850] x3 : 0000000000002690 x2 : ffff8017d3340480 [ 9.868214] x1 : 0000000000000028 x0 : 0000000000000002 [ 9.873580] Process kworker/16:1 (pid: 293, stack limit = 0x(____ptrval____)) [ 9.880788] Call trace: [ 9.883252] drm_mode_object_put+0x0/0x20 [ 9.887297] hibmc_unload+0x1c/0x80 [ 9.890815] hibmc_pci_probe+0x170/0x3c8 [ 9.894773] local_pci_probe+0x3c/0xb0 [ 9.898555] work_for_cpu_fn+0x18/0x28 [ 9.902337] process_one_work+0x1e0/0x318 [ 9.906382] worker_thread+0x228/0x450 [ 9.910164] kthread+0x128/0x130 [ 9.913418] ret_from_fork+0x10/0x18 [ 9.917024] Code: a94153f3 a8c27bfd d65f03c0 d503201f (f9400c01) [ 9.923180] ---[ end trace 2695ffa0af5be375 ]--- Fixes: d1667b86 ("drm/hisilicon/hibmc: Add support for frame buffer") Signed-off-by:
Xinliang Liu <z.liuxinliang@hisilicon.com> Signed-off-by:
-
SivapiriyanKumarasamy authored
[ Upstream commit 30049754 ] [WHY] Previously night light forced a full update by applying a transfer function update regardless of if it was changed. This logic was removed, Now gamma surface updates are only applied when there is also a plane info update, this does not work in cases such as using the night light slider. [HOW] When moving the night light slider we will perform a full update if the gamma has changed and there is a surface, even when the surface has not changed. Also get stream updates in setgamma prior to update planes and stream. Signed-off-by:
SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[ Upstream commit 481f576c ] [Why] The DISPCLK value was previously requested to be 15% higher for all ASICs that went through the dce110 bandwidth code path. As part of a refactoring of dce_clocks and the dce110 set bandwidth codepath this was removed for power saving considerations. That change caused display corruption under certain hardware configurations with Vega10. [How] The 15% DISPCLK increase is brought back but only on dce110 for now. This is should be a temporary workaround until the root cause is sorted out for why this occurs on Vega (or other ASICs, if reported). Tested-by:
Nick Sarnie <sarnex@gentoo.org> Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Harry Wentland <Harry.Wentland@amd.com> Acked-by:
-
Tomi Valkeinen authored
[ Upstream commit 538f66ba ] A DMM timeout "timed out waiting for done" has been observed on DRA7 devices. The timeout happens rarely, and only when the system is under heavy load. Debugging showed that the timeout can be made to happen much more frequently by optimizing the DMM driver, so that there's almost no code between writing the last DMM descriptors to RAM, and writing to DMM register which starts the DMM transaction. The current theory is that a wmb() does not properly ensure that the data written to RAM is observable by all the components in the system. This DMM timeout has caused interesting (and rare) bugs as the error handling was not functioning properly (the error handling has been fixed in previous commits): * If a DMM timeout happened when a GEM buffer was being pinned for display on the screen, a timeout error would be shown, but the driver would continue programming DSS HW with broken buffer, leading to SYNCLOST floods and possible crashes. * If a DMM timeout happened when other user (say, video decoder) was pinning a GEM buffer, a timeout would be shown but if the user handled the error properly, no other issues followed. * If a DMM timeout happened when a GEM buffer was being released, the driver does not even notice the error, leading to crashes or hang later. This patch adds wmb() and readl() calls after the last bit is written to RAM, which should ensure that the execution proceeds only after the data is actually in RAM, and thus observable by DMM. The read-back should not be needed. Further study is required to understand if DMM is somehow special case and read-back is ok, or if DRA7's memory barriers do not work correctly. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Christophe Leroy authored
[ Upstream commit 803d690e ] When a process allocates a hugepage, the following leak is reported by kmemleak. This is a false positive which is due to the pointer to the table being stored in the PGD as physical memory address and not virtual memory pointer. unreferenced object 0xc30f8200 (size 512): comm "mmap", pid 374, jiffies 4872494 (age 627.630s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<e32b68da>] huge_pte_alloc+0xdc/0x1f8 [<9e0df1e1>] hugetlb_fault+0x560/0x8f8 [<7938ec6c>] follow_hugetlb_page+0x14c/0x44c [<afbdb405>] __get_user_pages+0x1c4/0x3dc [<b8fd7cd9>] __mm_populate+0xac/0x140 [<3215421e>] vm_mmap_pgoff+0xb4/0xb8 [<c148db69>] ksys_mmap_pgoff+0xcc/0x1fc [<4fcd760f>] ret_from_syscall+0x0/0x38 See commit a984506c ("powerpc/mm: Don't report PUDs as memory leaks when using kmemleak") for detailed explanation. To fix that, this patch tells kmemleak to ignore the allocated hugepage table. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Sean Paul authored
[ Upstream commit 96fc56a7 ] The atomic_check is a bit too aggressive with respect to planes which leave the active area. This caused a bunch of log spew when the cursor got to the edge of the screen and stopped it from going all the way. This patch removes the conservative bounds checks from atomic and clips the dst rect such that we properly display planes which go off the screen. Changes in v2: - Apply the clip to src as well (taking into account scaling) Changes in v3: - Use drm_atomic_helper_check_plane_state() to clip src/dst Cc: Sravanthi Kollukuduru <skolluku@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Stephen Boyd authored
[ Upstream commit 2c043eef ] We got a bug report that this function oopses when trying to do a kasprintf(). PC is at string+0x2c/0x60 LR is at vsnprintf+0x28c/0x4ec pc : [<ffffff80088d35d8>] lr : [<ffffff80088d5fc4>] pstate: a0c00049 sp : ffffff80095fb540 x29: ffffff80095fb540 x28: ffffff8008ad42bc x27: 00000000ffffffd8 x26: 0000000000000000 x25: ffffff8008c216c8 x24: 0000000000000000 x23: 0000000000000000 x22: ffffff80095fb720 x21: 0000000000000000 x20: ffffff80095fb720 x19: ffffff80095fb6f0 x18: 000000000000000a x17: 00000000b42ba473 x16: ffffff800805bbe8 x15: 00000000000a157d x14: 000000000000000c x13: 0000000000000000 x12: 0000ffff0000000f x11: 0000000000000003 x10: 0000000000000001 x9 : 0000000000000040 x8 : 000000000000001c x7 : ffffffffffffffff x6 : 0000000000000000 x5 : 0000000000000228 x4 : 0000000000000000 x3 : ffff0a00ffffff04 x2 : 0000000000007961 x1 : 0000000000000000 x0 : 0000000000000000 Process kworker/3:1 (pid: 61, stack limit = 0xffffff80095f8000) Call trace: Exception stack(0xffffff80095fb400 to 0xffffff80095fb540) b400: 0000000000000000 0000000000000000 0000000000007961 ffff0a00ffffff04 b420: 0000000000000000 0000000000000228 0000000000000000 ffffffffffffffff b440: 000000000000001c 0000000000000040 0000000000000001 0000000000000003 b460: 0000ffff0000000f 0000000000000000 000000000000000c 00000000000a157d b480: ffffff800805bbe8 00000000b42ba473 000000000000000a ffffff80095fb6f0 b4a0: ffffff80095fb720 0000000000000000 ffffff80095fb720 0000000000000000 b4c0: 0000000000000000 ffffff8008c216c8 0000000000000000 00000000ffffffd8 b4e0: ffffff8008ad42bc ffffff80095fb540 ffffff80088d5fc4 ffffff80095fb540 b500: ffffff80088d35d8 00000000a0c00049 ffffff80095fb550 ffffff80080d06a4 b520: ffffffffffffffff ffffff80088d5e0c ffffff80095fb540 ffffff80088d35d8 [<ffffff80088d35d8>] string+0x2c/0x60 [<ffffff80088d5fc4>] vsnprintf+0x28c/0x4ec [<ffffff80083973b8>] kvasprintf+0x68/0x100 [<ffffff800839755c>] kasprintf+0x60/0x80 [<ffffff800849cc24>] drm_encoder_init+0x134/0x164 [<ffffff80084d9a7c>] dpu_encoder_init+0x60/0x94 [<ffffff80084eced0>] _dpu_kms_drm_obj_init+0xa0/0x424 [<ffffff80084ed870>] dpu_kms_hw_init+0x61c/0x6bc [<ffffff80084f7614>] msm_drm_bind+0x380/0x67c [<ffffff80085114e4>] try_to_bring_up_master+0x228/0x264 [<ffffff80085116e8>] component_master_add_with_match+0x90/0xc0 [<ffffff80084f722c>] msm_pdev_probe+0x260/0x2c8 [<ffffff800851a910>] platform_drv_probe+0x58/0xa8 [<ffffff80085185c8>] driver_probe_device+0x2d8/0x40c [<ffffff8008518928>] __device_attach_driver+0xd4/0x10c [<ffffff800851644c>] bus_for_each_drv+0xb4/0xd0 [<ffffff8008518230>] __device_attach+0xd0/0x160 [<ffffff8008518984>] device_initial_probe+0x24/0x30 [<ffffff800851744c>] bus_probe_device+0x38/0x98 [<ffffff8008517aac>] deferred_probe_work_func+0x144/0x148 [<ffffff80080c8654>] process_one_work+0x218/0x3bc [<ffffff80080c883c>] process_scheduled_works+0x44/0x48 [<ffffff80080c95bc>] worker_thread+0x288/0x32c [<ffffff80080cea30>] kthread+0x134/0x13c [<ffffff8008084750>] ret_from_fork+0x10/0x18 Code: 910003fd 2a0403e6 eb0400ff 54000060 (38646845) Looking at the code I see that drm_encoder_init() is called from the DPU code with 'DRM_MODE_CONNECTOR_DSI' passed in as the 'encoder_type' argument (follow from _dpu_kms_initialize_dsi()). That corresponds to the integer 16. That is then indexed into drm_encoder_enum_list in drm_encoder_init() to look up the name of the encoder. If you're still following along, that's an encoder not a connector! We really want to use DRM_MODE_ENCODER_DSI (integer 6) instead of DRM_MODE_CONNECTOR_DSI here, or we'll go out of bounds of the encoder array. Pass the right thing and everything is fine. Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Sean Paul <seanpaul@chromium.org> Fixes: 25fdd593 (drm/msm: Add SDM845 DPU support) Tested-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Anders Roxell authored
[ Upstream commit 6969019f ] When CONFIG_DEV_COREDUMP isn't defined msm_gpu_crashstate_capture doesn't pass the correct parameters. drivers/gpu/drm/msm/msm_gpu.c: In function ‘recover_worker’: drivers/gpu/drm/msm/msm_gpu.c:479:34: error: passing argument 2 of ‘msm_gpu_crashstate_capture’ from incompatible pointer type [-Werror=incompatible-pointer-types] msm_gpu_crashstate_capture(gpu, submit, comm, cmd); ^~~~~~ drivers/gpu/drm/msm/msm_gpu.c:388:13: note: expected ‘char *’ but argument is of type ‘struct msm_gem_submit *’ static void msm_gpu_crashstate_capture(struct msm_gpu *gpu, char *comm, ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/msm/msm_gpu.c:479:2: error: too many arguments to function ‘msm_gpu_crashstate_capture’ msm_gpu_crashstate_capture(gpu, submit, comm, cmd); ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/msm/msm_gpu.c:388:13: note: declared here static void msm_gpu_crashstate_capture(struct msm_gpu *gpu, char *comm, In current code the function msm_gpu_crashstate_capture parameters. Fixes: cdb95931 ("drm/msm/gpu: Add the buffer objects from the submit to the crash dump") Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Reviewed-By:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
-
Daniel Axtens authored
[ Upstream commit f5e28480 ] When enumerating page size definitions to check hardware support, we construct a constant which is (1U << (def->shift - 10)). However, the array of page size definitions is only initalised for various MMU_PAGE_* constants, so it contains a number of 0-initialised elements with def->shift == 0. This means we end up shifting by a very large number, which gives the following UBSan splat: ================================================================================ UBSAN: Undefined behaviour in /home/dja/dev/linux/linux/arch/powerpc/mm/tlb_nohash.c:506:21 shift exponent 4294967286 is too large for 32-bit type 'unsigned int' CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc3-00045-ga604f927b012-dirty #6 Call Trace: [c00000000101bc20] [c000000000a13d54] .dump_stack+0xa8/0xec (unreliable) [c00000000101bcb0] [c0000000004f20a8] .ubsan_epilogue+0x18/0x64 [c00000000101bd30] [c0000000004f2b10] .__ubsan_handle_shift_out_of_bounds+0x110/0x1a4 [c00000000101be20] [c000000000d21760] .early_init_mmu+0x1b4/0x5a0 [c00000000101bf10] [c000000000d1ba28] .early_setup+0x100/0x130 [c00000000101bf90] [c000000000000528] start_here_multiplatform+0x68/0x80 ================================================================================ Fix this by first checking if the element exists (shift != 0) before constructing the constant. Signed-off-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit 35d3cbe8 ] Andreas Müller reports: "Fixes: | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[220]: Failed to apply ACL on /dev/v4l-subdev0: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[224]: Failed to apply ACL on /dev/v4l-subdev1: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[215]: Failed to apply ACL on /dev/v4l-subdev10: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[228]: Failed to apply ACL on /dev/v4l-subdev2: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[232]: Failed to apply ACL on /dev/v4l-subdev5: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[217]: Failed to apply ACL on /dev/v4l-subdev11: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[214]: Failed to apply ACL on /dev/dri/card1: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[216]: Failed to apply ACL on /dev/v4l-subdev8: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[226]: Failed to apply ACL on /dev/v4l-subdev9: Operation not supported and nasty follow-ups: Starting weston from sddm as unpriviledged user fails with some hints on missing access rights." Select the CONFIG_TMPFS_POSIX_ACL option to fix these issues. Reported-by:
Andreas Müller <schnitzeltony@gmail.com> Signed-off-by:
Otavio Salvador <otavio@ossystems.com.br> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 14b28483 ] There are several switch statements that are missing break statements. Add missing breaks to handle any fall-throughs corner cases. Detected by CoverityScan, CID#1457175 ("Missing break in switch") Fixes: 18aafc59 ("drm/amd/powerplay: implement fw related smu interface for iceland.") Acked-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 74a07c0a ] In case memory resources for *bl_desc* were allocated, release them before return. Addresses-Coverity-ID: 1472021 ("Resource leak") Fixes: 0d466901 ("drm/nouveau/secboot/acr: Remove VLA usage") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit 59158ec4 ] Current kprobe event doesn't checks correctly whether the given event is on unloaded module or not. It just checks the event has ":" in the name. That is not enough because if we define a probe on non-exist symbol on loaded module, it allows to define that (with warning message) To ensure it correctly, this searches the module name on loaded module list and only if there is not, it allows to define it. (this event will be available when the target module is loaded) Link: http://lkml.kernel.org/r/153547309528.26502.8300278470528281328.stgit@devboxSigned-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Miles Chen authored
[ Upstream commit 33a1a7be ] The issue is found by a fuzzing test. If tty_find_polling_driver() recevies an incorrect input such as ',,' or '0b', the len becomes 0 and strncmp() always return 0. In this case, a null p->ops->poll_init() is called and it causes a kernel panic. Fix this by checking name length against zero in tty_find_polling_driver(). $echo ,, > /sys/module/kgdboc/parameters/kgdboc [ 20.804451] WARNING: CPU: 1 PID: 104 at drivers/tty/serial/serial_core.c:457 uart_get_baud_rate+0xe8/0x190 [ 20.804917] Modules linked in: [ 20.805317] CPU: 1 PID: 104 Comm: sh Not tainted 4.19.0-rc7ajb #8 [ 20.805469] Hardware name: linux,dummy-virt (DT) [ 20.805732] pstate: 20000005 (nzCv daif -PAN -UAO) [ 20.805895] pc : uart_get_baud_rate+0xe8/0x190 [ 20.806042] lr : uart_get_baud_rate+0xc0/0x190 [ 20.806476] sp : ffffffc06acff940 [ 20.806676] x29: ffffffc06acff940 x28: 0000000000002580 [ 20.806977] x27: 0000000000009600 x26: 0000000000009600 [ 20.807231] x25: ffffffc06acffad0 x24: 00000000ffffeff0 [ 20.807576] x23: 0000000000000001 x22: 0000000000000000 [ 20.807807] x21: 0000000000000001 x20: 0000000000000000 [ 20.808049] x19: ffffffc06acffac8 x18: 0000000000000000 [ 20.808277] x17: 0000000000000000 x16: 0000000000000000 [ 20.808520] x15: ffffffffffffffff x14: ffffffff00000000 [ 20.808757] x13: ffffffffffffffff x12: 0000000000000001 [ 20.809011] x11: 0101010101010101 x10: ffffff880d59ff5f [ 20.809292] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3 [ 20.809549] x7 : 0000000000000000 x6 : ffffff880d59ff5f [ 20.809803] x5 : 0000000080008001 x4 : 0000000000000003 [ 20.810056] x3 : ffffff900853e6b4 x2 : dfffff9000000000 [ 20.810693] x1 : ffffffc06acffad0 x0 : 0000000000000cb0 [ 20.811005] Call trace: [ 20.811214] uart_get_baud_rate+0xe8/0x190 [ 20.811479] serial8250_do_set_termios+0xe0/0x6f4 [ 20.811719] serial8250_set_termios+0x48/0x54 [ 20.811928] uart_set_options+0x138/0x1bc [ 20.812129] uart_poll_init+0x114/0x16c [ 20.812330] tty_find_polling_driver+0x158/0x200 [ 20.812545] configure_kgdboc+0xbc/0x1bc [ 20.812745] param_set_kgdboc_var+0xb8/0x150 [ 20.812960] param_attr_store+0xbc/0x150 [ 20.813160] module_attr_store+0x40/0x58 [ 20.813364] sysfs_kf_write+0x8c/0xa8 [ 20.813563] kernfs_fop_write+0x154/0x290 [ 20.813764] vfs_write+0xf0/0x278 [ 20.813951] __arm64_sys_write+0x84/0xf4 [ 20.814400] el0_svc_common+0xf4/0x1dc [ 20.814616] el0_svc_handler+0x98/0xbc [ 20.814804] el0_svc+0x8/0xc [ 20.822005] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 20.826913] Mem abort info: [ 20.827103] ESR = 0x84000006 [ 20.827352] Exception class = IABT (current EL), IL = 16 bits [ 20.827655] SET = 0, FnV = 0 [ 20.827855] EA = 0, S1PTW = 0 [ 20.828135] user pgtable: 4k pages, 39-bit VAs, pgdp = (____ptrval____) [ 20.828484] [0000000000000000] pgd=00000000aadee003, pud=00000000aadee003, pmd=0000000000000000 [ 20.829195] Internal error: Oops: 84000006 [#1] SMP [ 20.829564] Modules linked in: [ 20.829890] CPU: 1 PID: 104 Comm: sh Tainted: G W 4.19.0-rc7ajb #8 [ 20.830545] Hardware name: linux,dummy-virt (DT) [ 20.830829] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 20.831174] pc : (null) [ 20.831457] lr : serial8250_do_set_termios+0x358/0x6f4 [ 20.831727] sp : ffffffc06acff9b0 [ 20.831936] x29: ffffffc06acff9b0 x28: ffffff9008d7c000 [ 20.832267] x27: ffffff900969e16f x26: 0000000000000000 [ 20.832589] x25: ffffff900969dfb0 x24: 0000000000000000 [ 20.832906] x23: ffffffc06acffad0 x22: ffffff900969e160 [ 20.833232] x21: 0000000000000000 x20: ffffffc06acffac8 [ 20.833559] x19: ffffff900969df90 x18: 0000000000000000 [ 20.833878] x17: 0000000000000000 x16: 0000000000000000 [ 20.834491] x15: ffffffffffffffff x14: ffffffff00000000 [ 20.834821] x13: ffffffffffffffff x12: 0000000000000001 [ 20.835143] x11: 0101010101010101 x10: ffffff880d59ff5f [ 20.835467] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3 [ 20.835790] x7 : 0000000000000000 x6 : ffffff880d59ff5f [ 20.836111] x5 : c06419717c314100 x4 : 0000000000000007 [ 20.836419] x3 : 0000000000000000 x2 : 0000000000000000 [ 20.836732] x1 : 0000000000000001 x0 : ffffff900969df90 [ 20.837100] Process sh (pid: 104, stack limit = 0x(____ptrval____)) [ 20.837396] Call trace: [ 20.837566] (null) [ 20.837816] serial8250_set_termios+0x48/0x54 [ 20.838089] uart_set_options+0x138/0x1bc [ 20.838570] uart_poll_init+0x114/0x16c [ 20.838834] tty_find_polling_driver+0x158/0x200 [ 20.839119] configure_kgdboc+0xbc/0x1bc [ 20.839380] param_set_kgdboc_var+0xb8/0x150 [ 20.839658] param_attr_store+0xbc/0x150 [ 20.839920] module_attr_store+0x40/0x58 [ 20.840183] sysfs_kf_write+0x8c/0xa8 [ 20.840183] sysfs_kf_write+0x8c/0xa8 [ 20.840440] kernfs_fop_write+0x154/0x290 [ 20.840702] vfs_write+0xf0/0x278 [ 20.840942] __arm64_sys_write+0x84/0xf4 [ 20.841209] el0_svc_common+0xf4/0x1dc [ 20.841471] el0_svc_handler+0x98/0xbc [ 20.841713] el0_svc+0x8/0xc [ 20.842057] Code: bad PC value [ 20.842764] ---[ end trace a8835d7de79aaadf ]--- [ 20.843134] Kernel panic - not syncing: Fatal exception [ 20.843515] SMP: stopping secondary CPUs [ 20.844289] Kernel Offset: disabled [ 20.844634] CPU features: 0x0,21806002 [ 20.844857] Memory Limit: none [ 20.845172] ---[ end Kernel panic - not syncing: Fatal exception ]--- Signed-off-by:
Miles Chen <miles.chen@mediatek.com> Signed-off-by:
-
Sam Bobroff authored
[ Upstream commit f9bc28ae ] If an error occurs during an unplug operation, it's possible for eeh_dump_dev_log() to be called when edev->pdn is null, which currently leads to dereferencing a null pointer. Handle this by skipping the error log for those devices. Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by:
-
Joel Stanley authored
[ Upstream commit 960e3002 ] Ever since commit 15a3204d ("powerpc/64s: Set assembler machine type to POWER4") we force -mpower4 to be passed to the assembler irrespective of the CFLAGS used (for Book3s 64). When building a powerpc64 kernel with clang, clang will not add -many to the assembler flags, so any instructions that the compiler has generated that are not available on power4 will cause an error: /usr/bin/as -a64 -mppc64 -mlittle-endian -mpower8 \ -I ./arch/powerpc/include -I ./arch/powerpc/include/generated \ -I ./include -I ./arch/powerpc/include/uapi \ -I ./arch/powerpc/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi -I arch/powerpc -I arch/powerpc \ -maltivec -mpower4 -o init/do_mounts.o /tmp/do_mounts-3b0a3d.s /tmp/do_mounts-51ce54.s:748: Error: unrecognized opcode: `isel' GCC does include -many, so the GCC driven gas call will succeed: as -v -I ./arch/powerpc/include -I ./arch/powerpc/include/generated -I ./include -I ./arch/powerpc/include/uapi -I ./arch/powerpc/include/generated/uapi -I ./include/uapi -I ./include/generated/uapi -I arch/powerpc -I arch/powerpc -a64 -mpower8 -many -mlittle -maltivec -mpower4 -o init/do_mounts.o Note that isel is power7 and above for IBM CPUs. GCC only generates it for Power9 and above, but the above test was run against the clang generated assembly. Peter Bergner explains: When using -many -mpower4, gas will first try and find a matching power4 mnemonic and failing that, it will then allow any valid mnemonic that gas knows about. GCC's use of -many predates me though. IIRC, Alan looked at trying to remove it, but I forget why he didn't. Could be either a gcc or gas issue at the time. I'm not sure whether issue still exists or not. He and I have modified how gas works internally a fair amount since he tried removing gcc use of -many. I will also note that when using -many, gas will choose the first mnemonic that matches in the mnemonic table and we have (mostly) sorted the table so that server mnemonics show up earlier in the table than other mnemonics, so they'll be seen/chosen first. By explicitly setting -many we can build with Clang and GCC while retaining the -mpower4 option. Signed-off-by:
-
