- 24 Jun, 2020 4 commits
-
-
Mike Marciniszyn authored
When running iperf in a two host configuration the following trace can occur: [ 319.728730] NETDEV WATCHDOG: ib0 (hfi1): transmit queue 0 timed out The issue happens because the current implementation relies on the netif txq being stopped to control the flushing of the tx list. There are two resources that the transmit logic can wait on and stop the txq: - SDMA descriptors - Ring space to hold completions The ring space is tested on the sending side and relieved when the ring is consumed in the napi tx reaping. Unfortunately, that reaping can run conncurrently with the workqueue flushing of the txlist. If the txq is started just before the workitem executes, the txlist will never be flushed, leading to the txq being stuck. Fix by: - Adding sleep/wakeup wrappers * Use an atomic to control the call to the netif routines inside the wrappers - Use another atomic to record ring space exhaustion * Only wakeup when the a ring space exhaustion has happened and it relieved Add additional wrappers to clarify the ring space resource handling. Fixes: d99dc602 ("IB/hfi1: Add functions to transmit datagram ipoib packets") Link: https://lore.kernel.org/r/20200623204327.108092.4024.stgit@awfm-01.aw.intel.comReviewed-by:Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com>
-
Mike Marciniszyn authored
The current code mishandles -EBUSY in two ways: - The flow change doesn't test the return from the flush and runs on to process the current packet racing with the wakeup processing - The -EBUSY handling for a single packet inserts the tx into the txlist after the submit call, racing with the same wakeup processing Fix the first by dropping the skb and returning NETDEV_TX_OK. Fix the second by insuring the the list entry within the txreq is inited when allocated. This enables the sleep routine to detect that the txreq has used the non-list api and queue the packet to the txlist. Both flaws can lead to having the flushing thread executing in causing two threads to manipulate the txlist. Fixes: d99dc602 ("IB/hfi1: Add functions to transmit datagram ipoib packets") Link: https://lore.kernel.org/r/20200623204321.108092.83898.stgit@awfm-01.aw.intel.comReviewed-by:
-
Dennis Dalessandro authored
When the try_module_get calls were removed from opening and closing of the i2c debugfs file, the corresponding module_put calls were missed. This results in an inaccurate module use count that requires a power cycle to fix. Fixes: 09fbca8e ("IB/hfi1: No need to use try_module_get for debugfs") Link: https://lore.kernel.org/r/20200623203230.106975.76240.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by:
-
Dennis Dalessandro authored
We need to do some rework on the dummy netdev. Calling the free_netdev() would normally make sense, and that will be addressed in an upcoming patch. For now just revert the behavior to what it was before keeping the unused variable removal part of the patch. The dd->dumm_netdev is mainly used for packet receiving through alloc_netdev_mqs() for typical net devices. A a result, it should be freed with kfree instead of free_netdev() that leads to a crash when unloading the hfi1 module: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000855b54067 P4D 8000000855b54067 PUD 84a4f5067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 73 PID: 10299 Comm: modprobe Not tainted 5.6.0-rc5+ #1 Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0016.033120161139 03/31/2016 RIP: 0010:__hw_addr_flush+0x12/0x80 Code: 40 00 48 83 c4 08 4c 89 e7 5b 5d 41 5c e9 76 77 18 00 66 0f 1f 44 00 00 0f 1f 44 00 00 41 54 49 89 fc 55 53 48 8b 1f 48 39 df <48> 8b 2b 75 08 eb 4a 48 89 eb 48 89 c5 48 89 df e8 99 bf d0 ff 84 RSP: 0018:ffffb40e08783db8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002 RDX: ffffb40e00000000 RSI: 0000000000000246 RDI: ffff88ab13662298 RBP: ffff88ab13662000 R08: 0000000000001549 R09: 0000000000001549 R10: 0000000000000001 R11: 0000000000aaaaaa R12: ffff88ab13662298 R13: ffff88ab1b259e20 R14: ffff88ab1b259e42 R15: 0000000000000000 FS: 00007fb39b534740(0000) GS:ffff88b31f940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000084d3ea004 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dev_addr_flush+0x15/0x30 free_netdev+0x7e/0x130 hfi1_netdev_free+0x59/0x70 [hfi1] remove_one+0x65/0x110 [hfi1] pci_device_remove+0x3b/0xc0 device_release_driver_internal+0xec/0x1b0 driver_detach+0x46/0x90 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x26/0xa0 hfi1_mod_cleanup+0xc/0xd54 [hfi1] __x64_sys_delete_module+0x16c/0x260 ? exit_to_usermode_loop+0xa4/0xc0 do_syscall_64+0x5b/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 193ba031 ("IB/hfi1: Use free_netdev() in hfi1_netdev_free()") Link: https://lore.kernel.org/r/20200623203224.106975.16926.stgit@awfm-01.aw.intel.comReviewed-by:
-
- 22 Jun, 2020 3 commits
-
-
Shay Drory authored
Currently, when RMPP MADs are processed while the MAD agent is destroyed, it could result in use after free of rmpp_recv, as decribed below: cpu-0 cpu-1 ----- ----- ib_mad_recv_done() ib_mad_complete_recv() ib_process_rmpp_recv_wc() unregister_mad_agent() ib_cancel_rmpp_recvs() cancel_delayed_work() process_rmpp_data() start_rmpp() queue_delayed_work(rmpp_recv->cleanup_work) destroy_rmpp_recv() free_rmpp_recv() cleanup_work()[1] spin_lock_irqsave(&rmpp_recv->agent->lock) <-- use after free [1] cleanup_work() == recv_cleanup_handler Fix it by waiting for the MAD agent reference count becoming zero before calling to ib_cancel_rmpp_recvs(). Fixes: 9a41e38a ("IB/mad: Use IDR for agent IDs") Link: https://lore.kernel.org/r/20200621104738.54850-2-leon@kernel.orgSigned-off-by:Shay Drory <shayd@mellanox.com> Reviewed-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
Don't deref udata if it is NULL BUG: kernel NULL pointer dereference, address: 0000000000000030 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 SMP PTI CPU: 2 PID: 1592 Comm: python3 Not tainted 5.7.0-rc6+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:create_qp+0x39e/0xae0 [mlx5_ib] Code: c0 0d 00 00 bf 10 01 00 00 e8 be a9 e4 e0 48 85 c0 49 89 c2 0f 84 0c 07 00 00 41 8b 85 74 63 01 00 0f c8 a9 00 00 00 10 74 0a <41> 8b 46 30 0f c8 41 89 42 14 41 8b 52 18 41 0f b6 4a 1c 0f ca 89 RSP: 0018:ffffc9000067f8b0 EFLAGS: 00010206 RAX: 0000000010170000 RBX: ffff888441313000 RCX: 0000000000000000 RDX: 0000000000000200 RSI: 0000000000000000 RDI: ffff88845b1d4400 RBP: ffffc9000067fa60 R08: 0000000000000200 R09: ffff88845b1d4200 R10: ffff88845b1d4200 R11: ffff888441313000 R12: ffffc9000067f950 R13: ffff88846ac00140 R14: 0000000000000000 R15: ffff88846c2bc000 FS: 00007faa1a3c0540(0000) GS:ffff88846fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000446dca003 CR4: 0000000000760ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 mlx5_ib_create_qp+0x897/0xfa0 [mlx5_ib] ib_create_qp+0x9e/0x300 [ib_core] create_qp+0x92d/0xb20 [ib_uverbs] ? ib_uverbs_cq_event_handler+0x30/0x30 [ib_uverbs] ? release_resource+0x30/0x30 ib_uverbs_create_qp+0xc4/0xe0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xc8/0xf0 [ib_uverbs] ib_uverbs_run_method+0x223/0x770 [ib_uverbs] ? track_pfn_remap+0xa7/0x100 ? uverbs_disassociate_api+0xd0/0xd0 [ib_uverbs] ? remap_pfn_range+0x358/0x490 ib_uverbs_cmd_verbs.isra.6+0x19b/0x370 [ib_uverbs] ? rdma_umap_priv_init+0x82/0xe0 [ib_core] ? vm_mmap_pgoff+0xec/0x120 ib_uverbs_ioctl+0xc0/0x120 [ib_uverbs] ksys_ioctl+0x92/0xb0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x48/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: e383085c ("RDMA/mlx5: Set ECE options during QP create") Link: https://lore.kernel.org/r/20200621115959.60126-1-leon@kernel.orgSigned-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Mark Zhang authored
Query a dynamically-allocated counter before release it, to update it's hwcounters and log all of them into history data. Otherwise all values of these hwcounters will be lost. Fixes: f34a55e4 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read") Link: https://lore.kernel.org/r/20200621110000.56059-1-leon@kernel.orgSigned-off-by:
Mark Zhang <markz@mellanox.com> Reviewed-by:
-
- 19 Jun, 2020 1 commit
-
-
Fan Guo authored
If ib_dma_mapping_error() returns non-zero value, ib_mad_post_receive_mads() will jump out of loops and return -ENOMEM without freeing mad_priv. Fix this memory-leak problem by freeing mad_priv in this case. Fixes: 2c34e68f ("IB/mad: Check and handle potential DMA mapping errors") Link: https://lore.kernel.org/r/20200612063824.180611-1-guofan5@huawei.comSigned-off-by:
Fan Guo <guofan5@huawei.com> Signed-off-by:
-
- 18 Jun, 2020 13 commits
-
-
Max Gurtovoy authored
create_flags checks was refactored and broke the creation on integrity enabled QPs and actually broke the NVMe/RDMA and iSER ULP's when using mlx5 driven devices. Fixes: 2978975c ("RDMA/mlx5: Process create QP flags in one place") Link: https://lore.kernel.org/r/20200617130230.2846915-1-leon@kernel.orgSigned-off-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
Like any other QP type, rely on FW for the RAW_PACKET QPs to decide if ECE is supported or not. This fixes an inability to create RAW_PACKET QPs with latest rdma-core with the ECE support. Fixes: e383085c ("RDMA/mlx5: Set ECE options during QP create") Link: https://lore.kernel.org/r/20200618112507.3453496-2-leon@kernel.orgSigned-off-by:
-
Maor Gottlieb authored
Remote gid is not copied to the right address. Fix it by using rdma_ah_set_dgid_raw to copy the remote gid value from the QP context on query QP. Fixes: 70bd7fb8 ("RDMA/mlx5: Remove manually crafted QP context the query call") Link: https://lore.kernel.org/r/20200618112507.3453496-3-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
destroy_qp_common is called for flows where QP is already created by HW. While it is called from IB/core, the ibqp.* fields will be fully initialized, but it is not the case if this function is called during QP creation. Don't rely on ibqp fields as much as possible and initialize send_cq/recv_cq as temporal solution till all drivers will be converted to IB/core QP allocation scheme. refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 5372 at lib/refcount.c:28 refcount_warn_saturate+0xfe/0x1a0 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 5372 Comm: syz-executor.2 Not tainted 5.5.0-rc5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: mlx5_core_put_rsc+0x70/0x80 destroy_resource_common+0x8e/0xb0 mlx5_core_destroy_qp+0xaf/0x1d0 mlx5_ib_destroy_qp+0xeb0/0x1460 ib_destroy_qp_user+0x2d5/0x7d0 create_qp+0xed3/0x2130 ib_uverbs_create_qp+0x13e/0x190 ? ib_uverbs_ex_create_qp ib_uverbs_write+0xaa5/0xdf0 __vfs_write+0x7c/0x100 ksys_write+0xc8/0x200 do_syscall_64+0x9c/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 08d53976 ("RDMA/mlx5: Copy response to the user in one place") Link: https://lore.kernel.org/r/20200617130148.2846643-1-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
In disassociate flow, the type_attrs is set to be NULL, which is in an implicit way is checked in alloc_uobj() by "if (!attrs->context)". Change the logic to rely on that check, to be consistent with other alloc_uobj() places that will fix the following kernel splat. BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 2743 Comm: python3 Not tainted 5.7.0-rc6-for-upstream-perf-2020-05-23_19-04-38-5 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:alloc_begin_fd_uobject+0x18/0xf0 [ib_uverbs] Code: 89 43 48 eb 97 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 f5 41 54 55 48 89 fd 53 48 83 ec 08 48 8b 1f <48> 8b 43 18 48 8b 80 80 00 00 00 48 3d 20 10 33 a0 74 1c 48 3d 30 RSP: 0018:ffffc90001127b70 EFLAGS: 00010282 RAX: ffffffffa0339fe0 RBX: 0000000000000000 RCX: 8000000000000007 RDX: fffffffffffffffb RSI: ffffc90001127d28 RDI: ffff88843fe1f600 RBP: ffff88843fe1f600 R08: ffff888461eb06d8 R09: ffff888461eb06f8 R10: ffff888461eb0700 R11: 0000000000000000 R12: ffff88846a5f6450 R13: ffffc90001127d28 R14: ffff88845d7d6ea0 R15: ffffc90001127cb8 FS: 00007f469bff1540(0000) GS:ffff88846f980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 0000000450018003 CR4: 0000000000760ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? xa_store+0x28/0x40 rdma_alloc_begin_uobject+0x4f/0x90 [ib_uverbs] ib_uverbs_create_comp_channel+0x87/0xf0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xb1/0xf0 [ib_uverbs] ib_uverbs_cmd_verbs.isra.8+0x96d/0xae0 [ib_uverbs] ? get_page_from_freelist+0x3bb/0xf70 ? _copy_to_user+0x22/0x30 ? uverbs_disassociate_api+0xd0/0xd0 [ib_uverbs] ? __wake_up_common_lock+0x87/0xc0 ib_uverbs_ioctl+0xbc/0x130 [ib_uverbs] ksys_ioctl+0x83/0xc0 ? ksys_write+0x55/0xd0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x48/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f469ac43267 Fixes: 849e1490 ("RDMA/core: Do not allow alloc_commit to fail") Link: https://lore.kernel.org/r/20200617061826.2625359-1-leon@kernel.orgSigned-off-by:
-
Yangyang Li authored
If a IMP reset caused by some hardware errors and hns RoCE driver reset occurred at the same time, there is a possiblity that the IMP will stop dealing with command and users can't use the hardware. The logs are as follows: hns3 0000:fd:00.1: cleaned 0, need to clean 1 hns3 0000:fd:00.1: firmware version query failed -11 hns3 0000:fd:00.1: Cmd queue init failed hns3 0000:fd:00.1: Upgrade reset level hns3 0000:fd:00.1: global reset interrupt The hns NIC driver divides the reset process into 3 status: initialization, hardware resetting and softwaring restting. RoCE driver gets reset status by interfaces provided by NIC driver and commands will not be sent to the IMP if the driver is in any above status. The main reason for this issue is that there is a time gap between status 1 and 2, if the RoCE driver sends commands to the IMP during this gap, the IMP will stop working because it is not ready. To eliminate the time gap, the hns NIC driver has added a new interface in commit a4de0228 ("net: hns3: provide .get_cmdq_stat interface for the client"), so RoCE driver can ensure that no commands will be sent during resetting. Link: https://lore.kernel.org/r/1592314778-52822-1-git-send-email-liweihang@huawei.comSigned-off-by:
Yangyang Li <liyangyang20@huawei.com> Signed-off-by:
Weihang Li <liweihang@huawei.com> Signed-off-by:
-
Yangyang Li authored
ibmr.device is assigned after MR is successfully registered, but both write_mtpt() and frmr_write_mtpt() accesses it during the mr registration process, which may cause the following error when trying to register MR in userspace and pbl_hop_num is set to 0. pc : hns_roce_mtr_find+0xa0/0x200 [hns_roce] lr : set_mtpt_pbl+0x54/0x118 [hns_roce_hw_v2] sp : ffff00023e73ba20 x29: ffff00023e73ba20 x28: ffff00023e73bad8 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000002 x24: 0000000000000000 x23: ffff00023e73bad0 x22: 0000000000000000 x21: ffff0000094d9000 x20: 0000000000000000 x19: ffff8020a6bdb2c0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0140000000000000 x12: 0040000000000041 x11: ffff000240000000 x10: 0000000000001000 x9 : 0000000000000000 x8 : ffff802fb7558480 x7 : ffff802fb7558480 x6 : 000000000003483d x5 : ffff00023e73bad0 x4 : 0000000000000002 x3 : ffff00023e73bad8 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000094d9708 Call trace: hns_roce_mtr_find+0xa0/0x200 [hns_roce] set_mtpt_pbl+0x54/0x118 [hns_roce_hw_v2] hns_roce_v2_write_mtpt+0x14c/0x168 [hns_roce_hw_v2] hns_roce_mr_enable+0x6c/0x148 [hns_roce] hns_roce_reg_user_mr+0xd8/0x130 [hns_roce] ib_uverbs_reg_mr+0x14c/0x2e0 [ib_uverbs] ib_uverbs_write+0x27c/0x3e8 [ib_uverbs] __vfs_write+0x60/0x190 vfs_write+0xac/0x1c0 ksys_write+0x6c/0xd8 __arm64_sys_write+0x24/0x30 el0_svc_common+0x78/0x130 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc Solve above issue by adding a pointer of structure hns_roce_dev as a parameter of write_mtpt() and frmr_write_mtpt(), so that both of these functions can access it before finishing MR's registration. Fixes: 9b2cf76c ("RDMA/hns: Optimize PBL buffer allocation process") Link: https://lore.kernel.org/r/1592314629-51715-1-git-send-email-liweihang@huawei.comSigned-off-by:
-
Leon Romanovsky authored
Missed steps during ECE handshake left userspace application with less options for the ECE handshake. Pass ECE options in the additional transitions. Fixes: 50aec2c3 ("RDMA/mlx5: Return ECE data after modify QP") Link: https://lore.kernel.org/r/20200616104536.2426384-1-leon@kernel.orgSigned-off-by:
-
Mark Zhang authored
The bind_list and listen_list must be accessed under a lock, add the missing locking around the access in cm_ib_id_from_event() In addition add lockdep asserts to make it clearer what the locking semantic is here. general protection fault: 0000 [#1] SMP NOPTI CPU: 226 PID: 126135 Comm: kworker/226:1 Tainted: G OE 4.12.14-150.47-default #1 SLE15 Hardware name: Cray Inc. Windom/Windom, BIOS 0.8.7 01-10-2020 Workqueue: ib_cm cm_work_handler [ib_cm] task: ffff9c5a60a1d2c0 task.stack: ffffc1d91f554000 RIP: 0010:cma_ib_req_handler+0x3f1/0x11b0 [rdma_cm] RSP: 0018:ffffc1d91f557b40 EFLAGS: 00010286 RAX: deacffffffffff30 RBX: 0000000000000001 RCX: ffff9c2af5bb6000 RDX: 00000000000000a9 RSI: ffff9c5aa4ed2f10 RDI: ffffc1d91f557b08 RBP: ffffc1d91f557d90 R08: ffff9c340cc80000 R09: ffff9c2c0f901900 R10: 0000000000000000 R11: 0000000000000001 R12: deacffffffffff30 R13: ffff9c5a48aeec00 R14: ffffc1d91f557c30 R15: ffff9c5c2eea3688 FS: 0000000000000000(0000) GS:ffff9c5c2fa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00002b5cc03fa320 CR3: 0000003f8500a000 CR4: 00000000003406e0 Call Trace: ? rdma_addr_cancel+0xa0/0xa0 [ib_core] ? cm_process_work+0x28/0x140 [ib_cm] cm_process_work+0x28/0x140 [ib_cm] ? cm_get_bth_pkey.isra.44+0x34/0xa0 [ib_cm] cm_work_handler+0xa06/0x1a6f [ib_cm] ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to+0x7c/0x4b0 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 process_one_work+0x1da/0x400 worker_thread+0x2b/0x3f0 ? process_one_work+0x400/0x400 kthread+0x118/0x140 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x22/0x40 Code: 00 66 83 f8 02 0f 84 ca 05 00 00 49 8b 84 24 d0 01 00 00 48 85 c0 0f 84 68 07 00 00 48 2d d0 01 00 00 49 89 c4 0f 84 59 07 00 00 <41> 0f b7 44 24 20 49 8b 77 50 66 83 f8 0a 75 9e 49 8b 7c 24 28 Fixes: 4c21b5bc ("IB/cma: Add net_dev and private data checks to RDMA CM") Link: https://lore.kernel.org/r/20200616104304.2426081-1-leon@kernel.orgSigned-off-by:
-
Michal Kalderon authored
Private data passed to iwarp_cm_handler is copied for connection request / response, but ignored otherwise. If junk is passed, it is stored in the event and used later in the event processing. The driver passes an old junk pointer during connection close which leads to a use-after-free on event processing. Set private data to NULL for events that don 't have private data. BUG: KASAN: use-after-free in ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: Read of size 4 at addr ffff8886caa71200 by task kworker/u128:1/5250 kernel: kernel: Workqueue: iw_cm_wq cm_work_handler [iw_cm] kernel: Call Trace: kernel: dump_stack+0x8c/0xc0 kernel: print_address_description.constprop.0+0x1b/0x210 kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: __kasan_report.cold+0x1a/0x33 kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: kasan_report+0xe/0x20 kernel: check_memory_region+0x130/0x1a0 kernel: memcpy+0x20/0x50 kernel: ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: ? __rpc_execute+0x608/0x620 [sunrpc] kernel: cma_iw_handler+0x212/0x330 [rdma_cm] kernel: ? iw_conn_req_handler+0x6e0/0x6e0 [rdma_cm] kernel: ? enqueue_timer+0x86/0x140 kernel: ? _raw_write_lock_irq+0xd0/0xd0 kernel: cm_work_handler+0xd3d/0x1070 [iw_cm] Fixes: e411e058 ("RDMA/qedr: Add iWARP connection management functions") Link: https://lore.kernel.org/r/20200616093408.17827-1-michal.kalderon@marvell.comSigned-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
-
Gal Pressman authored
The max_pkeys device attribute was not set in query device verb, set it to one in order to account for the default pkey (0xffff). This information is exposed to userspace and can cause malfunction Fixes: 40909f66 ("RDMA/efa: Add EFA verbs implementation") Link: https://lore.kernel.org/r/20200614103534.88060-1-galpress@amazon.comReviewed-by:
Firas JahJah <firasj@amazon.com> Reviewed-by:
Yossi Leybovich <sleybo@amazon.com> Signed-off-by:
Gal Pressman <galpress@amazon.com> Signed-off-by:
-
Aditya Pakki authored
In case of failure of alloc_ud_wq_attr(), the memory allocated by rvt_alloc_rq() is not freed. Fix it by calling rvt_free_rq() using the existing clean-up code. Fixes: d310c4bf ("IB/{rdmavt, hfi1, qib}: Remove AH refcount for UD QPs") Link: https://lore.kernel.org/r/20200614041148.131983-1-pakki001@umn.eduSigned-off-by:
Aditya Pakki <pakki001@umn.edu> Acked-by:
-
Leon Romanovsky authored
Fix the following sparse error by adding annotation to cm_queue_work_unlock() that it releases cm_id_priv->lock lock. drivers/infiniband/core/cm.c:936:24: warning: context imbalance in 'cm_queue_work_unlock' - unexpected unlock Fixes: e83f195a ("RDMA/cm: Pull duplicated code into cm_queue_work_unlock()") Link: https://lore.kernel.org/r/20200611130045.1994026-1-leon@kernel.orgReported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
- 15 Jun, 2020 4 commits
-
-
Tom Seewald authored
The variable buf_addr is type dma_addr_t, which may not be the same size as a pointer. To ensure it is the correct size, cast to a uintptr_t. Fixes: c536277e ("RDMA/siw: Fix 64/32bit pointer inconsistency") Link: https://lore.kernel.org/r/20200610174717.15932-1-tseewald@gmail.comSigned-off-by:
Tom Seewald <tseewald@gmail.com> Reviewed-by:
Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by:
-
Kieran Bingham authored
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptors -> descriptors Link: https://lore.kernel.org/r/20200609124610.3445662-3-kieran.bingham+renesas@ideasonboard.com Link: https://lore.kernel.org/r/20200609124610.3445662-12-kieran.bingham+renesas@ideasonboard.comSigned-off-by:Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by:
-
Tom Seewald authored
Variables of type size_t should use %zu rather than %lu [1]. The variables "inlen", "ucmd", "last", and "size" are all size_t, so use the correct format specifiers. [1] https://www.kernel.org/doc/html/latest/core-api/printk-formats.html Fixes: e383085c ("RDMA/mlx5: Set ECE options during QP create") Link: https://lore.kernel.org/r/20200605023012.9527-1-tseewald@gmail.comSigned-off-by:
-
Colin Ian King authored
The assignment to resp.response_length is never read since it is being updated again on the next statement. The assignment is redundant so removed it. Fixes: a645a89d ("RDMA/mlx5: Return ECE DC support") Link: https://lore.kernel.org/r/20200604143902.56021-1-colin.king@canonical.com Addresses-Coverity: ("Unused value") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
-
- 14 Jun, 2020 4 commits
-
-
Linus Torvalds authored
-
git://github.com/micah-morton/linuxLinus Torvalds authored
Pull SafeSetID update from Micah Morton: "Add additional LSM hooks for SafeSetID SafeSetID is capable of making allow/deny decisions for set*uid calls on a system, and we want to add similar functionality for set*gid calls. The work to do that is not yet complete, so probably won't make it in for v5.8, but we are looking to get this simple patch in for v5.8 since we have it ready. We are planning on the rest of the work for extending the SafeSetID LSM being merged during the v5.9 merge window" * tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux: security: Add LSM hooks to set*gid syscalls
-
Thomas Cedeno authored
The SafeSetID LSM uses the security_task_fix_setuid hook to filter set*uid() syscalls according to its configured security policy. In preparation for adding analagous support in the LSM for set*gid() syscalls, we add the requisite hook here. Tested by putting print statements in the security_task_fix_setgid hook and seeing them get hit during kernel boot. Signed-off-by:
Thomas Cedeno <thomascedeno@google.com> Signed-off-by:
Micah Morton <mortonm@chromium.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "This reverts the direct io port to iomap infrastructure of btrfs merged in the first pull request. We found problems in invalidate page that don't seem to be fixable as regressions or without changing iomap code that would not affect other filesystems. There are four reverts in total, but three of them are followup cleanups needed to revert a43a67a2 cleanly. The result is the buffer head based implementation of direct io. Reverts are not great, but under current circumstances I don't see better options" * tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Revert "btrfs: switch to iomap_dio_rw() for dio" Revert "fs: remove dio_end_io()" Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK" Revert "btrfs: split btrfs_direct_IO to read and write part"
-
- 13 Jun, 2020 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ... -
David Sterba authored
This reverts commit a43a67a2. This patch reverts the main part of switching direct io implementation to iomap infrastructure. There's a problem in invalidate page that couldn't be solved as regression in this development cycle. The problem occurs when buffered and direct io are mixed, and the ranges overlap. Although this is not recommended, filesystems implement measures or fallbacks to make it somehow work. In this case, fallback to buffered IO would be an option for btrfs (this already happens when direct io is done on compressed data), but the change would be needed in the iomap code, bringing new semantics to other filesystems. Another problem arises when again the buffered and direct ios are mixed, invalidation fails, then -EIO is set on the mapping and fsync will fail, though there's no real error. There have been discussions how to fix that, but revert seems to be the least intrusive option. Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/Signed-off-by:
David Sterba <dsterba@suse.com>
-
Grygorii Strashko authored
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow unregistered mcast packets to pass. This happens, because ALE VLAN entries on these SoCs do not contain port masks for reg/unreg mcast packets, but instead store indexes of ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for reg/unreg mcast packets. This path was missed by commit 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled"). Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti(). Fixes: 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
The ALE parameters structure is created on stack, so it has to be reset before passing to cpsw_ale_create() to avoid garbage values. Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2020-06-12 The following pull-request contains BPF updates for your *net* tree. We've added 26 non-merge commits during the last 10 day(s) which contain a total of 27 files changed, 348 insertions(+), 93 deletions(-). The main changes are: 1) sock_hash accounting fix, from Andrey. 2) libbpf fix and probe_mem sanitizing, from Andrii. 3) sock_hash fixes, from Jakub. 4) devmap_val fix, from Jesper. 5) load_bytes_relative fix, from YiFei. ==================== Signed-off-by: -
Liao Pingfang authored
Looking into the context (atomic!) and the error message should be dropped. Signed-off-by:
Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by:
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: "12 cifs/smb3 fixes, 2 for stable. - add support for idsfromsid on create and chgrp/chown allowing ability to save owner information more naturally for some workloads - improve query info (getattr) when SMB3.1.1 posix extensions are negotiated by using new query info level" * tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: Add debug message for new file creation with idsfromsid mount option cifs: fix chown and chgrp when idsfromsid mount option enabled smb3: allow uid and gid owners to be set on create with idsfromsid mount option smb311: Add tracepoints for new compound posix query info smb311: add support for using info level for posix extensions query smb311: Add support for lookup with posix extensions query info smb311: Add support for SMB311 query info (non-compounded) SMB311: Add support for query info using posix extensions (level 100) smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl smb3: fix typo in mount options displayed in /proc/mounts cifs: Add get_security_type_str function to return sec type. smb3: extend fscache mount volume coherency check -
Linus Torvalds authored
Let's keep "git status" happy and quiet. Fixes: 9762dc14 ("samples: add binderfs sample program Fixes: fca5e949 ("samples: binderfs: really compile this sample and fix build issues") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
I'm not convinced the script makes useful automaed help lines anyway, but since we're trying to deprecate the use of "---help---" in Kconfig files, let's fix the doc example code too. See commit a7f7f624 ("treewide: replace '---help---' in Kconfig files with 'help'") Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is the set of changes collected since just before the merge window opened. It's mostly minor fixes in drivers. The one non-driver set is the three optical disk (sr) changes where two are error path fixes and one is a helper conversion. The big driver change is the hpsa compat_alloc_userspace rework by Al so he can kill the remaining user. This has been tested and acked by the maintainer" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits) scsi: acornscsi: Fix an error handling path in acornscsi_probe() scsi: storvsc: Remove memset before memory freeing in storvsc_suspend() scsi: cxlflash: Remove an unnecessary NULL check scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM scsi: sr: Fix sr_probe() missing deallocate of device minor scsi: sr: Fix sr_probe() missing mutex_destroy scsi: st: Convert convert get_user_pages() --> pin_user_pages() scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb() scsi: target: Fix NULL pointer dereference scsi: target: Initialize LUN in transport_init_se_cmd() scsi: target: Factor out a new helper, target_cmd_init_cdb() scsi: hpsa: hpsa_ioctl(): Tidy up a bit scsi: hpsa: Get rid of compat_alloc_user_space() scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl() scsi: ufs: Remove redundant urgent_bkop_lvl initialization scsi: ufs: Don't update urgent bkops level when toggling auto bkops scsi: qedf: Remove redundant initialization of variable rc scsi: mpt3sas: Fix memset() in non-RDPQ mode scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj ...
-
